-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXbgx9wAKCRDh3BK/laaZ
PIjMAQCTrWPf6pLHSoq+Pll7b8swu1m2mW97fj5k8coED1/DSQEA4222PkIdMmhu
qyHnoX0fTtYXg6NnHbDVWsNL4uG8YAM=
=RE9K
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Mostly virtiofs fixes, but also fixes a regression and couple of
longstanding data/metadata writeback ordering issues"
* tag 'fuse-fixes-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: redundant get_fuse_inode() calls in fuse_writepages_fill()
fuse: Add changelog entries for protocols 7.1 - 7.8
fuse: truncate pending writes on O_TRUNC
fuse: flush dirty data/metadata before non-truncate setattr
virtiofs: Remove set but not used variable 'fc'
virtiofs: Retry request submission from worker context
virtiofs: Count pending forgets as in_flight forgets
virtiofs: Set FR_SENT flag only after request has been sent
virtiofs: No need to check fpq->connected state
virtiofs: Do not end request in submission context
fuse: don't advise readdirplus for negative lookup
fuse: don't dereference req->args on finished request
virtio-fs: don't show mount options
virtio-fs: Change module name to virtiofs.ko
Shared and writable mappings (__S.1.) should be clean (!dirty) initially
and made dirty on a subsequent write either through the hardware DBM
(dirty bit management) mechanism or through a write page fault. A clean
pte for the arm64 kernel is one that has PTE_RDONLY set and PTE_DIRTY
clear.
The PAGE_SHARED{,_EXEC} attributes have PTE_WRITE set (PTE_DBM) and
PTE_DIRTY clear. Prior to commit 73e86cb03c ("arm64: Move PTE_RDONLY
bit handling out of set_pte_at()"), it was the responsibility of
set_pte_at() to set the PTE_RDONLY bit and mark the pte clean if the
software PTE_DIRTY bit was not set. However, the above commit removed
the pte_sw_dirty() check and the subsequent setting of PTE_RDONLY in
set_pte_at() while leaving the PAGE_SHARED{,_EXEC} definitions
unchanged. The result is that shared+writable mappings are now dirty by
default
Fix the above by explicitly setting PTE_RDONLY in PAGE_SHARED{,_EXEC}.
In addition, remove the superfluous PTE_DIRTY bit from the kernel PROT_*
attributes.
Fixes: 73e86cb03c ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()")
Cc: <stable@vger.kernel.org> # 4.14.x-
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
groups_only mode in nvme_read_ana_log() is no longer used: remove it.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The following scenario results in an IO hang:
1) ctrl completes a request with NVME_SC_ANA_TRANSITION.
NVME_NS_ANA_PENDING bit in ns->flags is set and ana_work is triggered.
2) ana_work: nvme_read_ana_log() tries to get the ANA log page from the ctrl.
This fails because ctrl disconnects.
Therefore nvme_update_ns_ana_state() is not called
and NVME_NS_ANA_PENDING bit in ns->flags is not cleared.
3) ctrl reconnects: nvme_mpath_init(ctrl,...) calls
nvme_read_ana_log(ctrl, groups_only=true).
However, nvme_update_ana_state() does not update namespaces
because nr_nsids = 0 (due to groups_only mode).
4) scan_work calls nvme_validate_ns() finds the ns and re-validates OK.
Result:
The ctrl is now live but NVME_NS_ANA_PENDING bit in ns->flags is still set.
Consequently ctrl will never be considered a viable path by __nvme_find_path().
IO will hang if ctrl is the only or the last path to the namespace.
More generally, while ctrl is reconnecting, its ANA state may change.
And because nvme_mpath_init() requests ANA log in groups_only mode,
these changes are not propagated to the existing ctrl namespaces.
This may result in a mal-function or an IO hang.
Solution:
nvme_mpath_init() will nvme_read_ana_log() with groups_only set to false.
This will not harm the new ctrl case (no namespaces present),
and will make sure the ANA state of namespaces gets updated after reconnect.
Note: Another option would be for nvme_mpath_init() to invoke
nvme_parse_ana_log(..., nvme_set_ns_ana_state) for each existing namespace.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit e78a7614f3 ("idle: Prevent late-arriving interrupts from
disrupting offline") changes arch_cpu_idle_dead to be called with
interrupts disabled, which triggers the WARN in pnv_smp_cpu_kill_self.
Fix this by fixing up irq_happened after hard disabling, rather than
requiring there are no pending interrupts, similarly to what was done
done until commit 2525db04d1 ("powerpc/powernv: Simplify lazy IRQ
handling in CPU offline").
Fixes: e78a7614f3 ("idle: Prevent late-arriving interrupts from disrupting offline")
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add unexpected_mask rather than checking for known bad values,
change the WARN_ON() to a WARN_ON_ONCE()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191022115814.22456-1-npiggin@gmail.com
While the static key is correctly initialized as being disabled, it will
remain forever enabled once turned on. This means that if we start with an
asymmetric system and hotplug out enough CPUs to end up with an SMP system,
the static key will remain set - which is obviously wrong. We should detect
this and turn off things like misfit migration and capacity aware wakeups.
As Quentin pointed out, having separate root domains makes this slightly
trickier. We could have exclusive cpusets that create an SMP island - IOW,
the domains within this root domain will not see any asymmetry. This means
we can't just disable the key on domain destruction, we need to count how
many asymmetric root domains we have.
Consider the following example using Juno r0 which is 2+4 big.LITTLE, where
two identical cpusets are created: they both span both big and LITTLE CPUs:
asym0 asym1
[ ][ ]
L L B L L B
$ cgcreate -g cpuset:asym0
$ cgset -r cpuset.cpus=0,1,3 asym0
$ cgset -r cpuset.mems=0 asym0
$ cgset -r cpuset.cpu_exclusive=1 asym0
$ cgcreate -g cpuset:asym1
$ cgset -r cpuset.cpus=2,4,5 asym1
$ cgset -r cpuset.mems=0 asym1
$ cgset -r cpuset.cpu_exclusive=1 asym1
$ cgset -r cpuset.sched_load_balance=0 .
(the CPU numbering may look odd because on the Juno LITTLEs are CPUs 0,3-5
and bigs are CPUs 1-2)
If we make one of those SMP (IOW remove asymmetry) by e.g. hotplugging its
big core, we would end up with an SMP cpuset and an asymmetric cpuset - the
static key must remain set, because we still have one asymmetric root domain.
With the above example, this could be done with:
$ echo 0 > /sys/devices/system/cpu/cpu2/online
Which would result in:
asym0 asym1
[ ][ ]
L L B L L
When both SMP and asymmetric cpusets are present, all CPUs will observe
sched_asym_cpucapacity being set (it is system-wide), but not all CPUs
observe asymmetry in their sched domain hierarchy:
per_cpu(sd_asym_cpucapacity, <any CPU in asym0>) == <some SD at DIE level>
per_cpu(sd_asym_cpucapacity, <any CPU in asym1>) == NULL
Change the simple key enablement to an increment, and decrement the key
counter when destroying domains that cover asymmetric CPUs.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hannes@cmpxchg.org
Cc: lizefan@huawei.com
Cc: morten.rasmussen@arm.com
Cc: qperret@google.com
Cc: tj@kernel.org
Cc: vincent.guittot@linaro.org
Fixes: df054e8445 ("sched/topology: Add static_key for asymmetric CPU capacity optimizations")
Link: https://lkml.kernel.org/r/20191023153745.19515-3-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ultravisor will do an integrity check of the kernel image but we
relocated it so the check will fail. Restore the original image by
relocating it back to the kernel virtual base address.
This works because during build vmlinux is linked with an expected
virtual runtime address of KERNELBASE.
Fixes: 6a9c930bd7 ("powerpc/prom_init: Add the ESM call to prom_init")
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Tested-by: Michael Anderson <andmike@linux.ibm.com>
[mpe: Add IS_ENABLED() to fix the CONFIG_RELOCATABLE=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190911163433.12822-1-bauerman@linux.ibm.com
* Fix free/alloc race for OGM and OGMv2, by Sven Eckelmann (2 patches)
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAl2yvoAWHHN3QHNpbW9u
d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoVosEAC7Ei09QJKa2Wh6by4c8OQKvloK
ecei39e0FjMUx4/XETSR/kdHrRFwzMPvIhqe+DUCski7p5x9sHWrkJwIWWirGrDf
mAsF8mhA1E0pfsQmQRqu4h/UbDyLLhsbfEf95B75Uf6Nq2cIG0Ko7rb2ao3DR7c2
YwvSjzT+zwlS8Q6Hj1YsJKSS3BEk5NQ9r9soD9WhwWmYynn9TxTWy8o9z3lBCXtV
j+mOm0qNebxsDKhr7jbfujjIaepmTOQJHwqPzm1Vo/v6CMEdJzd6j8vbsxCUyXvI
/Cg3V+8INEGmRmCDT96paO5kYkHptr8i467Raj3DAdwlh3BuoMo382i3D3GOXgEK
VtieWhuOplAJrbc+GFifvFSAA75+B8rZ/IV8CDFIbWHhEjZ/fdtyl1panqQkKSqw
n5m/nAyKmfTZ9CH0kZ/zKU8EKPaMNh0BUTbjhU/8Zn0lDI+loBs024K5a00TWtD8
GnjCGKi87HhtCn/3hxasbaVEyJIrMvPlzyYRylzFfSml55GCBuA8i8l/7ql0QKCe
xq78J08x/n3RjAj+aguLQ1v4Vz/EgOvzj4RdfHS2CGSI9m37z7wz5oFTKcqi4tX+
4Phpl7onRnMDx6AiZHMGxwrti/AdFO3YZmOiIh/IEBjUBhmABuj6Eq40thl/8Hkv
DfoOTKf98HhmaW6d/g==
=usWf
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-for-davem-20191025' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are two batman-adv bugfixes:
* Fix free/alloc race for OGM and OGMv2, by Sven Eckelmann (2 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
An earlier bugfix introduced a dependency on CONFIG_NET_SCH_TAPRIO,
but this missed the case of NET_SCH_TAPRIO=m and NET_DSA_SJA1105=y,
which still causes a link error:
drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_setup_tc_taprio':
sja1105_tas.c:(.text+0x5c): undefined reference to `taprio_offload_free'
sja1105_tas.c:(.text+0x3b4): undefined reference to `taprio_offload_get'
drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_tas_teardown':
sja1105_tas.c:(.text+0x6ec): undefined reference to `taprio_offload_free'
Change the dependency to only allow selecting the TAS code when it
can link against the taprio code.
Fixes: a8d570de0c ("net: dsa: sja1105: Add dependency for NET_DSA_SJA1105_TAS")
Fixes: 317ab5b86c ("net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offload")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are calling the checksum helper after the dma_map_single()
call to map the packet. This is incorrect as the checksumming
code will touch the packet from the CPU. This means the cache
won't be properly flushes (or the bounce buffering will leave
us with the unmodified packet to DMA).
This moves the calculation of the checksum & vlan tags to
before the DMA mapping.
This also has the side effect of fixing another bug: If the
checksum helper fails, we goto "drop" to drop the packet, which
will not unmap the DMA mapping.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Fixes: 05690d633f ("ftgmac100: Upgrade to NETIF_F_HW_CSUM")
Reviewed-by: Vijay Khemka <vijaykhemka@fb.com>
Tested-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_page_frag() optimizes skb_frag allocations by using per-task
skb_frag cache when it knows it's the only user. The condition is
determined by seeing whether the socket allocation mask allows
blocking - if the allocation may block, it obviously owns the task's
context and ergo exclusively owns current->task_frag.
Unfortunately, this misses recursion through memory reclaim path.
Please take a look at the following backtrace.
[2] RIP: 0010:tcp_sendmsg_locked+0xccf/0xe10
...
tcp_sendmsg+0x27/0x40
sock_sendmsg+0x30/0x40
sock_xmit.isra.24+0xa1/0x170 [nbd]
nbd_send_cmd+0x1d2/0x690 [nbd]
nbd_queue_rq+0x1b5/0x3b0 [nbd]
__blk_mq_try_issue_directly+0x108/0x1b0
blk_mq_request_issue_directly+0xbd/0xe0
blk_mq_try_issue_list_directly+0x41/0xb0
blk_mq_sched_insert_requests+0xa2/0xe0
blk_mq_flush_plug_list+0x205/0x2a0
blk_flush_plug_list+0xc3/0xf0
[1] blk_finish_plug+0x21/0x2e
_xfs_buf_ioapply+0x313/0x460
__xfs_buf_submit+0x67/0x220
xfs_buf_read_map+0x113/0x1a0
xfs_trans_read_buf_map+0xbf/0x330
xfs_btree_read_buf_block.constprop.42+0x95/0xd0
xfs_btree_lookup_get_block+0x95/0x170
xfs_btree_lookup+0xcc/0x470
xfs_bmap_del_extent_real+0x254/0x9a0
__xfs_bunmapi+0x45c/0xab0
xfs_bunmapi+0x15/0x30
xfs_itruncate_extents_flags+0xca/0x250
xfs_free_eofblocks+0x181/0x1e0
xfs_fs_destroy_inode+0xa8/0x1b0
destroy_inode+0x38/0x70
dispose_list+0x35/0x50
prune_icache_sb+0x52/0x70
super_cache_scan+0x120/0x1a0
do_shrink_slab+0x120/0x290
shrink_slab+0x216/0x2b0
shrink_node+0x1b6/0x4a0
do_try_to_free_pages+0xc6/0x370
try_to_free_mem_cgroup_pages+0xe3/0x1e0
try_charge+0x29e/0x790
mem_cgroup_charge_skmem+0x6a/0x100
__sk_mem_raise_allocated+0x18e/0x390
__sk_mem_schedule+0x2a/0x40
[0] tcp_sendmsg_locked+0x8eb/0xe10
tcp_sendmsg+0x27/0x40
sock_sendmsg+0x30/0x40
___sys_sendmsg+0x26d/0x2b0
__sys_sendmsg+0x57/0xa0
do_syscall_64+0x42/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
In [0], tcp_send_msg_locked() was using current->page_frag when it
called sk_wmem_schedule(). It already calculated how many bytes can
be fit into current->page_frag. Due to memory pressure,
sk_wmem_schedule() called into memory reclaim path which called into
xfs and then IO issue path. Because the filesystem in question is
backed by nbd, the control goes back into the tcp layer - back into
tcp_sendmsg_locked().
nbd sets sk_allocation to (GFP_NOIO | __GFP_MEMALLOC) which makes
sense - it's in the process of freeing memory and wants to be able to,
e.g., drop clean pages to make forward progress. However, this
confused sk_page_frag() called from [2]. Because it only tests
whether the allocation allows blocking which it does, it now thinks
current->page_frag can be used again although it already was being
used in [0].
After [2] used current->page_frag, the offset would be increased by
the used amount. When the control returns to [0],
current->page_frag's offset is increased and the previously calculated
number of bytes now may overrun the end of allocated memory leading to
silent memory corruptions.
Fix it by adding gfpflags_normal_context() which tests sleepable &&
!reclaim and use it to determine whether to use current->task_frag.
v2: Eric didn't like gfp flags being tested twice. Introduce a new
helper gfpflags_normal_context() and combine the two tests.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
KCSAN reported a data-race in udp_set_dev_scratch() [1]
The issue here is that we must not write over skb fields
if skb is shared. A similar issue has been fixed in commit
89c22d8c3b ("net: Fix skb csum races when peeking")
While we are at it, use a helper only dealing with
udp_skb_scratch(skb)->csum_unnecessary, as this allows
udp_set_dev_scratch() to be called once and thus inlined.
[1]
BUG: KCSAN: data-race in udp_set_dev_scratch / udpv6_recvmsg
write to 0xffff888120278317 of 1 bytes by task 10411 on cpu 1:
udp_set_dev_scratch+0xea/0x200 net/ipv4/udp.c:1308
__first_packet_length+0x147/0x420 net/ipv4/udp.c:1556
first_packet_length+0x68/0x2a0 net/ipv4/udp.c:1579
udp_poll+0xea/0x110 net/ipv4/udp.c:2720
sock_poll+0xed/0x250 net/socket.c:1256
vfs_poll include/linux/poll.h:90 [inline]
do_select+0x7d0/0x1020 fs/select.c:534
core_sys_select+0x381/0x550 fs/select.c:677
do_pselect.constprop.0+0x11d/0x160 fs/select.c:759
__do_sys_pselect6 fs/select.c:784 [inline]
__se_sys_pselect6 fs/select.c:769 [inline]
__x64_sys_pselect6+0x12e/0x170 fs/select.c:769
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
read to 0xffff888120278317 of 1 bytes by task 10413 on cpu 0:
udp_skb_csum_unnecessary include/net/udp.h:358 [inline]
udpv6_recvmsg+0x43e/0xe90 net/ipv6/udp.c:310
inet6_recvmsg+0xbb/0x240 net/ipv6/af_inet6.c:592
sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
__sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
__do_sys_recvmmsg net/socket.c:2703 [inline]
__se_sys_recvmmsg net/socket.c:2696 [inline]
__x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 10413 Comm: syz-executor.0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 2276f58ac5 ("udp: use a separate rx queue for packet reception")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch corrects the SPDX License Identifier style in
header files related to DPAA2 Ethernet driver supporting
Freescale SoCs with DPAA2. For C header files
Documentation/process/license-rules.rst mandates C-like comments
(opposed to C source files where C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
net: avoid KCSAN splats
Often times we use skb_queue_empty() without holding a lock,
meaning that other cpus (or interrupt) can change the queue
under us. This is fine, but we need to properly annotate
the lockless intent to make sure the compiler wont over
optimize things.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Busy polling usually runs without locks.
Let's use skb_queue_empty_lockless() instead of skb_queue_empty()
Also uses READ_ONCE() in __skb_try_recv_datagram() to address
a similar potential problem.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many poll() handlers are lockless. Using skb_queue_empty_lockless()
instead of skb_queue_empty() is more appropriate.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some paths call skb_queue_empty() without holding
the queue lock. We must use a barrier in order
to not let the compiler do strange things, and avoid
KCSAN splats.
Adding a barrier in skb_queue_empty() might be overkill,
I prefer adding a new helper to clearly identify
points where the callers might be lockless. This might
help us finding real bugs.
The corresponding WRITE_ONCE() should add zero cost
for current compilers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
eq->buf_list->buf and eq->buf_list should also be freed when eqe_hop_num
is set to 0, or there will be memory leaks.
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/1572072995-11277-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For legacy I/O BARs (non-MMIO BARs) to work correctly on RISC-V Linux,
we need to establish a reserved memory region for them, so that drivers
that wish to use the legacy I/O BARs can issue reads and writes against
a memory region that is mapped to the host PCIe controller's I/O BAR
mapping.
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
_put_ep_safe() and _put_pass_ep_safe() free the skb before it is freed by
process_work(). fix double free by freeing the skb only in process_work().
Fixes: 1dad0ebeea ("iw_cxgb4: Avoid touch after free error in ARP failure handlers")
Link: https://lore.kernel.org/r/1572006880-5800-1-git-send-email-bharat@chelsio.com
Signed-off-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
syzkaller reported an issue where it looks like a malicious app can
trigger a use-after-free of reading the ctx ->sq_array and ->rings
value right after having installed the ring fd in the process file
table.
Defer ring fd installation until after we're done reading those
values.
Fixes: 75b28affdd ("io_uring: allocate the two rings together")
Reported-by: syzbot+6f03d895a6cd0d06187f@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull HID fixes from Jiri Kosina:
- HID++ device support regression fixes (race condition during cleanup,
device detection fix, opps fix) from Andrey Smirnov
- disable PM on i2c-hid, as it's causing problems with a lot of
devices; other OSes apparently don't implement/enable it either; from
Kai-Heng Feng
- error handling fix in intel-ish driver, from Zhang Lixu
- syzbot fuzzer fix for HID core code from Alan Stern
- a few other tiny fixups (printk message cleanup, new device ID)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: i2c-hid: add Trekstor Primebook C11B to descriptor override
HID: logitech-hidpp: do all FF cleanup in hidpp_ff_destroy()
HID: logitech-hidpp: rework device validation
HID: logitech-hidpp: split g920_get_config()
HID: i2c-hid: Remove runtime power management
HID: intel-ish-hid: fix wrong error handling in ishtp_cl_alloc_tx_ring()
HID: google: add magnemite/masterball USB ids
HID: Fix assumption that devices have inputs
HID: prodikeys: make array keys static const, makes object smaller
HID: fix error message in hid_open_report()
Some minor fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdtqXyAAoJECgfDbjSjVRpJ3kH/008+Y5aDaWcWP4//49epuu/
dldFu073fppcNeYjRLOLEGPLHok3w2uh4zsBRZ+hrK8qiH7yjZDxxzLrbBWKINRE
HpZRp5Xdtmdu7QRWUMBiGHTdU/CIY/tUpGRy2d+k8LxeTBcrZIqj/9ixrPRW6sh0
0iXPQJtHtDAbbMjbs86s9ScwfcY/mwxLFf23168DnwE44pk86faFGASstWx+XSKl
DU14t3eQnYX33R089lDMP+ohKLsqMXyD160WWZDPg+Ml2GhzyGGWixcDmZn3k42q
NBCOsfLL8uxdATZlWMlv4xX1ykiNcOfijBnp8eutsLx4JyIWFxqVF0bXO3GsztM=
=xHx4
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Some minor fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vringh: fix copy direction of vringh_iov_push_kern()
vsock/virtio: remove unused 'work' field from 'struct virtio_vsock_pkt'
virtio_ring: fix stalls for packed rings
This reverts commit caa8422d01.
It turned out that this commit caused a regression at shutdown /
reboot, as the synchronize_irq() calls seems blocking the whole
shutdown. Also another part of the change about shuffling the call
order looks suspicious; the azx_stop_chip() call disables the CORB /
RIRB while the others may still need the CORB/RIRB update.
Since the original commit itself was a cargo-fix, let's revert the
whole patch.
Fixes: caa8422d01 ("ALSA: hda: Flush interrupts on disabling")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205333
BugLinK: https://bugs.freedesktop.org/show_bug.cgi?id=111174
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/20191028081056.22010-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The events in the same group don't start or stop simultaneously.
Here is the ftrace when enabling event group for uncore_iio_0:
# perf stat -e "{uncore_iio_0/event=0x1/,uncore_iio_0/event=0xe/}"
<idle>-0 [000] d.h. 8959.064832: read_msr: a41, value
b2b0b030 //Read counter reg of IIO unit0 counter0
<idle>-0 [000] d.h. 8959.064835: write_msr: a48, value
400001 //Write Ctrl reg of IIO unit0 counter0 to enable
counter0. <------ Although counter0 is enabled, Unit Ctrl is still
freezed. Nothing will count. We are still good here.
<idle>-0 [000] d.h. 8959.064836: read_msr: a40, value
30100 //Read Unit Ctrl reg of IIO unit0
<idle>-0 [000] d.h. 8959.064838: write_msr: a40, value
30000 //Write Unit Ctrl reg of IIO unit0 to enable all
counters in the unit by clear Freeze bit <------Unit0 is un-freezed.
Counter0 has been enabled. Now it starts counting. But counter1 has not
been enabled yet. The issue starts here.
<idle>-0 [000] d.h. 8959.064846: read_msr: a42, value 0
//Read counter reg of IIO unit0 counter1
<idle>-0 [000] d.h. 8959.064847: write_msr: a49, value
40000e //Write Ctrl reg of IIO unit0 counter1 to enable
counter1. <------ Now, counter1 just starts to count. Counter0 has
been running for a while.
Current code un-freezes the Unit Ctrl right after the first counter is
enabled. The subsequent group events always loses some counter values.
Implement pmu_enable and pmu_disable support for uncore, which can help
to batch hardware accesses.
No one uses uncore_enable_box and uncore_disable_box. Remove them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-drivers-review@eclists.intel.com
Cc: linux-perf@eclists.intel.com
Fixes: 087bfbb032 ("perf/x86: Add generic Intel uncore PMU support")
Link: https://lkml.kernel.org/r/1572014593-31591-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This saves us writing the IBS control MSR twice when disabling the
event.
I searched revision guides for all families since 10h, and did not
find occurrence of erratum #420, nor anything remotely similar:
so we isolate the secondary MSR write to family 10h only.
Also unconditionally update the count mask for IBS Op implementations
that have read & writeable current count (CurCnt) fields in addition
to the MaxCnt field. These bits were reserved on prior
implementations, and therefore shouldn't have negative impact.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: c9574fe0bd ("perf/x86-ibs: Implement workaround for IBS erratum #420")
Link: https://lkml.kernel.org/r/20191023150955.30292-2-kim.phillips@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The loop that reads all the IBS MSRs into *buf stopped one MSR short of
reading the IbsOpData register, which contains the RipInvalid status bit.
Fix the offset_max assignment so the MSR gets read, so the RIP invalid
evaluation is based on what the IBS h/w output, instead of what was
left in memory.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: d47e8238cd ("perf/x86-ibs: Take instruction pointer from ibs sample")
Link: https://lkml.kernel.org/r/20191023150955.30292-1-kim.phillips@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
1a59413124 ("perf: Add wakeup watermark control to the AUX area")
added attr.__reserved_2 padding, but forgot to add an ABI check to reject
attributes with this field set. Fix that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Cc: mathieu.poirier@linaro.org
Link: https://lkml.kernel.org/r/20191025121636.75182-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We want to copy from iov to buf, so the direction was wrong.
Note: no real user for the helper, but it will be used by future
features.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'work' field was introduced with commit 06a8fc7836
("VSOCK: Introduce virtio_vsock_common.ko")
but it is never used in the code, so we can remove it to save
memory allocated in the per-packet 'struct virtio_vsock_pkt'
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When VIRTIO_F_RING_EVENT_IDX is negotiated, virtio devices can
use virtqueue_enable_cb_delayed_packed to reduce the number of device
interrupts. At the moment, this is the case for virtio-net when the
napi_tx module parameter is set to false.
In this case, the virtio driver selects an event offset and expects that
the device will send a notification when rolling over the event offset
in the ring. However, if this roll-over happens before the event
suppression structure update, the notification won't be sent. To address
this race condition the driver needs to check wether the device rolled
over the offset after updating the event suppression structure.
With VIRTIO_F_RING_PACKED, the virtio driver did this by reading the
flags field of the descriptor at the specified offset.
Unfortunately, checking at the event offset isn't reliable: if
descriptors are chained (e.g. when INDIRECT is off) not all descriptors
are overwritten by the device, so it's possible that the device skipped
the specific descriptor driver is checking when writing out used
descriptors. If this happens, the driver won't detect the race condition
and will incorrectly expect the device to send a notification.
For virtio-net, the result will be a TX queue stall, with the
transmission getting blocked forever.
With the packed ring, it isn't easy to find a location which is
guaranteed to change upon the roll-over, except the next device
descriptor, as described in the spec:
Writes of device and driver descriptors can generally be
reordered, but each side (driver and device) are only required to
poll (or test) a single location in memory: the next device descriptor after
the one they processed previously, in circular order.
while this might be sub-optimal, let's do exactly this for now.
Cc: stable@vger.kernel.org
Cc: Jason Wang <jasowang@redhat.com>
Fixes: f51f982682 ("virtio_ring: leverage event idx in packed ring")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than adding prototypes for C functions called only by assembly
code, mark them as __visible. This avoids adding prototypes that will
never be used by the callers. Resolves the following sparse warnings:
arch/riscv/kernel/irq.c:27:29: warning: symbol 'do_IRQ' was not declared. Should it be static?
arch/riscv/kernel/ptrace.c:151:6: warning: symbol 'do_syscall_trace_enter' was not declared. Should it be static?
arch/riscv/kernel/ptrace.c:165:6: warning: symbol 'do_syscall_trace_exit' was not declared. Should it be static?
arch/riscv/kernel/signal.c:295:17: warning: symbol 'do_notify_resume' was not declared. Should it be static?
arch/riscv/kernel/traps.c:92:1: warning: symbol 'do_trap_unknown' was not declared. Should it be static?
arch/riscv/kernel/traps.c:94:1: warning: symbol 'do_trap_insn_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:96:1: warning: symbol 'do_trap_insn_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:98:1: warning: symbol 'do_trap_insn_illegal' was not declared. Should it be static?
arch/riscv/kernel/traps.c💯1: warning: symbol 'do_trap_load_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:102:1: warning: symbol 'do_trap_load_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:104:1: warning: symbol 'do_trap_store_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:106:1: warning: symbol 'do_trap_store_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:108:1: warning: symbol 'do_trap_ecall_u' was not declared. Should it be static?
arch/riscv/kernel/traps.c:110:1: warning: symbol 'do_trap_ecall_s' was not declared. Should it be static?
arch/riscv/kernel/traps.c:112:1: warning: symbol 'do_trap_ecall_m' was not declared. Should it be static?
arch/riscv/kernel/traps.c:124:17: warning: symbol 'do_trap_break' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:136:24: warning: symbol 'smp_callin' was not declared. Should it be static?
Based on a suggestion from Luc Van Oostenryck.
This version includes changes based on feedback from Christoph Hellwig
<hch@lst.de>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de> # for do_syscall_trace_*
The __user annotations were removed from the {save,restore}_fp_state()
function signatures by commit 007f5c3589 ("Refactor FPU code in
signal setup/return procedures"), but should be present, and sparse
warns when they are not applied. Add them back in.
This change should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Fixes: 007f5c3589 ("Refactor FPU code in signal setup/return procedures")
Cc: Alan Kao <alankao@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
sparse identifies several missing prototypes caused by missing
preprocessor include directives:
arch/riscv/kernel/cpufeature.c:16:6: warning: symbol 'has_fpu' was not declared. Should it be static?
arch/riscv/kernel/process.c:26:6: warning: symbol 'arch_cpu_idle' was not declared. Should it be static?
arch/riscv/kernel/reset.c:15:6: warning: symbol 'pm_power_off' was not declared. Should it be static?
arch/riscv/kernel/syscall_table.c:15:6: warning: symbol 'sys_call_table' was not declared. Should it be static?
arch/riscv/kernel/traps.c:149:13: warning: symbol 'trap_init' was not declared. Should it be static?
arch/riscv/kernel/vdso.c:54:5: warning: symbol 'arch_setup_additional_pages' was not declared. Should it be static?
arch/riscv/kernel/smp.c:64:6: warning: symbol 'arch_match_cpu_phys_id' was not declared. Should it be static?
arch/riscv/kernel/module-sections.c:89:5: warning: symbol 'module_frob_arch_sections' was not declared. Should it be static?
arch/riscv/mm/context.c:42:6: warning: symbol 'switch_mm' was not declared. Should it be static?
Fix by including the appropriate header files in the appropriate
source files.
This patch should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Several functions and arrays which are only used in the files in which
they are declared are missing "static" qualifiers. Warnings for these
symbols are reported by sparse:
arch/riscv/kernel/vdso.c:28:18: warning: symbol 'vdso_data' was not declared. Should it be static?
arch/riscv/mm/sifive_l2_cache.c:145:12: warning: symbol 'sifive_l2_init' was not declared. Should it be static?
Resolve these warnings by marking them as static.
This version incorporates feedback from Greentime Hu
<greentime.hu@sifive.com>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Greentime Hu <greentime.hu@sifive.com>
sparse complains loudly when string literals associated with
preprocessor directives are split into multiple, separately quoted
strings across different lines:
arch/riscv/mm/init.c:341:9: error: Expected ; at the end of type declaration
arch/riscv/mm/init.c:341:9: error: got "not use absolute addressing."
arch/riscv/mm/init.c:358:9: error: Trying to use reserved word 'do' as identifier
arch/riscv/mm/init.c:358:9: error: Expected ; at end of declaration
[ ... ]
It turns out this doesn't compile. The existing Linux practice for
this situation is simply to use a single long line. So, fix by
concatenating the strings.
This patch should have no functional impact.
This version incorporates changes based on feedback from Luc Van
Oostenryck <luc.vanoostenryck@gmail.com>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-riscv/CAAhSdy2nX2LwEEAZuMtW_ByGTkHO6KaUEvVxRnba_ENEjmFayQ@mail.gmail.com/T/#mc1a58bc864f71278123d19a7abc083a9c8e37033
Fixes: 387181dcdb ("RISC-V: Always compile mm/init.c with cmodel=medany and notrace")
Cc: Anup Patel <anup.patel@wdc.com>
Add prototypes for assembly language functions defined in head.S,
and include these prototypes into C source files that call those
functions.
This patch resolves the following warnings from sparse:
arch/riscv/kernel/setup.c:39:10: warning: symbol 'hart_lottery' was not declared. Should it be static?
arch/riscv/kernel/setup.c:42:13: warning: symbol 'parse_dtb' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:33:6: warning: symbol '__cpu_up_stack_pointer' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:34:6: warning: symbol '__cpu_up_task_pointer' was not declared. Should it be static?
arch/riscv/mm/fault.c:25:17: warning: symbol 'do_page_fault' was not declared. Should it be static?
This change should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
io_queue_link_head() owns shadow_req after taking it as an argument.
By not freeing it in case of an error, it can leak the request along
with taken ctx->refs.
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix crash on flowtable due to race between garbage collection
and insertion.
2) Restore callback unbinding in netfilter offloads.
3) Fix races on IPVS module removal, from Davide Caratti.
4) Make old_secure_tcp per-netns to fix sysbot report,
from Eric Dumazet.
5) Validate matching length in netfilter offloads, from wenxu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 fixes from Thomas Gleixner:
"Two fixes for the VMWare guest support:
- Unbreak VMWare platform detection which got wreckaged by converting
an integer constant to a string constant.
- Fix the clang build of the VMWAre hypercall by explicitely
specifying the ouput register for INL instead of using the short
form"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/vmware: Fix platform detection VMWARE_PORT macro
x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvm
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for time(keeping):
- Add a missing include to prevent compiler warnings.
- Make the VDSO implementation of clock_getres() POSIX compliant
again. A recent change dropped the NULL pointer guard which is
required as NULL is a valid pointer value for this function.
- Fix two function documentation typos"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Fix two trivial comments
timers/sched_clock: Include local timekeeping.h for missing declarations
lib/vdso: Make clock_getres() POSIX compliant again
