Commit Graph

145 Commits

Author SHA1 Message Date
Paul Mundt
37bef8f989 Merge branches 'sh/pm-runtime' and 'common/clkfwk' into sh-fixes-for-linus 2011-11-11 16:16:25 +09:00
Paul Mundt
79e7066415 sh: clkfwk: Kill off remaining debugfs cruft.
Now that all of the named string association with clocks has been
migrated to clkdev lookups there's no meaningful named topology that can
be constructed for a debugfs tree view. Get rid of the left over bits,
and shrink struct clk a bit in the process.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11 16:11:41 +09:00
Paul Mundt
d03299ee60 drivers: sh: Kill off dead pathname for runtime PM stub.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11 15:58:50 +09:00
Paul Mundt
750a7eee73 drivers: sh: Generalize runtime PM platform stub.
The runtime PM platform support stub in use by ARM-based SH/R-Mobile
platforms contains nothing that's specifically ARM-related and instead of
wholly generic to anything using the clock framework.

The recent runtime PM changes interact rather badly with the lazy
disabling of clocks late in the boot process through the clock framework,
leading to situations where the runtime suspend/resume paths are entered
without a clock being actively driven due to having been lazily gated
off.

In order to correct this we can trivially tie in the aforementioned stub
as a general fallback for all SH platforms that don't presently have
their own runtime PM implementations (the corner case being SH-based
SH-Mobile platforms, which have their own stub through the hwblk API --
which in turn has bitrotted and will be subsequently adapted to use the
same stub as everyone else), regardless of whether the platforms choose
to define power domains of their own or not.

This fixes up regressions for clock framework users who also build in
runtime PM support without any specific power domains of their own, which
was previously causing the serial console to be lost when warring with
lazy clock disabling.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11 15:41:50 +09:00
Linus Torvalds
32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Magnus Damm
7d377b170a sh: intc: Allow triggering on both edges for ARM SoCs
Enable IRQ_TYPE_EDGE_BOTH on all R/SH-Mobile ARM SoCs.
This hardware feature is supported by sh7367, sh7377,
sh7372 and sh73a0.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05 00:57:48 +09:00
Kuninori Morimoto
dd2c0ca1b1 sh: clkfwk: add clk_rate_mult_range_round()
This provides a clk_rate_mult_range_round() helper for use by some of the
CPG PLL ranged multipliers, following the same approach as used by the
div ranges.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-05 00:49:27 +09:00
Paul Gortmaker
07c9273945 drivers/sh: Add export.h for EXPORT_SYMBOL to intc/virq.c
This is exporting symbols and will fail to build once we remove
the implicit presence of module.h

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:58 -04:00
Paul Gortmaker
f7be345515 sh: Add export.h to arch/sh specific files as required.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:05 -04:00
Paul Gortmaker
db4e83957f sh: Add module.h to arch/sh specific files as required.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:04 -04:00
Paul Gortmaker
0c43871b40 sh: fix implicit use of stat.h in arch/sh specific files
To fix:

arch/sh/drivers/dma/dma-sysfs.c:45:8: error: 'S_IRUGO' undeclared here (not in a function)
arch/sh/drivers/dma/dma-sysfs.c:75:8: error: 'S_IWUSR' undeclared here (not in a function)
make[4]: *** [arch/sh/drivers/dma/dma-sysfs.o] Error 1

drivers/sh/intc/core.c:449: error: 'S_IRUGO' undeclared here (not in a function)
make[5]: *** [drivers/sh/intc/core.o] Error 1

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:04 -04:00
Nobuhiro Iwamatsu
a102a08887 sh: userimask.c needs linux/stat.h
This fix the problem that S_IRUSR and S_IWUSR are not solved in userimask.c.

-----
CC      drivers/usb/host/r8a66597-hcd.o
drivers/sh/intc/userimask.c:57: error: ‘S_IRUSR’ undeclared here (not in a function)
drivers/sh/intc/userimask.c:57: error: ‘S_IWUSR’ undeclared here (not in a function)
CC      drivers/watchdog/shwdt.o
-----

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-10-28 15:03:54 +09:00
Magnus Damm
ad2a8e7ea4 sh: pfc: Add GPIO IRQ support
Add GPIO IRQ support to the shared PFC code in drivers/sh/pfc.c

The enums pointed out by a certain GPIO will be matched against
a table for IRQ to enum mappings.

Only the shared PFC code is updated by this patch. SoC specific
changes are also needed to allow platforms to make use of this
feature.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-10-28 15:03:52 +09:00
Magnus Damm
c63bcc6ff1 sh: pfc: get_config_reg() shift clean up
Clean up the f_width shift code in get_config_reg().

Reported-by: Ryusuke Sakato <ryusuke.sakato.bx@renesas.com>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-10-28 14:39:26 +09:00
Magnus Damm
52e3124f24 sh: intc: Add IRQ trigger bit field check
R-Mobile SoCs such as sh73a0 include PINT blocks in INTC
that come with 2-bit IRQ trigger support. Add code to make
sure the bit width is checked so 4-bit only modes like for
instance EDGE_BOTH will fail for PINT.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-10-28 14:39:24 +09:00
Paul Mundt
e80ca144ea Merge branch 'common/core' into sh-latest 2011-08-08 16:33:54 +09:00
Linus Torvalds
e10b87d2b5 Merge branch 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x
* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits)
  SH: static should be at beginning of declaration
  sh: move CLKDEV_xxx_ID macro to sh_clk.h
  sh: clock-shx3: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: modify I2C clock settings
  sh: clock-sh7343: modify I2C clock settings
  sh: clock-sh7723: modify I2C clock settings
  sh: clock-sh7722: modify I2C clock settings
  sh: clock-sh7724: modify I2C clock settings
  serial: sh-sci: Fix up pretty name printing for port IRQs.
  serial: sh-sci: Kill off per-port enable/disable callbacks.
  serial: sh-sci: Add missing module description/author bits.
  serial: sh-sci: Regtype probing doesn't need to be fatal.
  sh: Tidy up pre-clkdev clk_get() error handling.
  ...
2011-08-01 06:10:16 -10:00
Magnus Damm
9a14a92c93 sh: intc: enable both edges GPIO interrupts on sh7372
IRQ-capable GPIOs on sh7372 can be configured to produce interrupts on
both edges.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-07-21 16:53:24 +09:00
Al Viro
12520c438f switch assorted clock drivers to debugfs_remove_recursive()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:51 -04:00
Paul Mundt
225ca45c3c sh: clkfwk: Convert to IS_ERR_OR_NULL.
Trivial cleanup.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24 17:35:40 +09:00
Magnus Damm
794d78fea5 drivers: sh: late disabling of clocks V2
This V2 patch changes the clock disabling behavior during boot.
Two different changes are made:

1) Delay disabling of clocks until late in the boot process.
   This fixes an existing issue where in-use clocks without
   software reference are disabled by mistake during boot.
   One example of this is the handling of the Mackerel serial
   console output that shares clock with the I2C controller.

2) Write out the "disabled" state to the hardware for clocks
   that not have been used by the kernel. In other words,
   make sure so far unused clocks actually get turned off.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24 16:27:07 +09:00
Magnus Damm
583af252ab drivers: sh: resume enabled clocks fix
Extend the SH / SH-Mobile ARM clock framework to only
resume clocks that have been enabled.

Without this fix divide-by-zero is triggering on sh7372
FSIDIV during system wide resume of Suspend-to-RAM.

Signed-off-by: Magnus Damm <damm@opensource.se>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-14 15:15:25 +09:00
Paul Mundt
972b1943be Merge branch 'sh/genirq-threading' into sh-latest 2011-05-23 11:36:14 +09:00
Paul Mundt
442f56d917 sh: intc: Set virtual IRQs as nothread.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-27 14:35:44 +09:00
Kuninori Morimoto
52c10ad22b sh: clkfwk: fixup clk_rate_table_build parameter in div6 clock
div6 clock should not use arch_flags for clk_rate_table_build,
because SH_CLK_DIV6_EXT doesn't care .arch_flags.
clk->freq_table[] will be all CPUFREQ_ENTRY_INVALID without this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: stable@kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-18 18:33:31 +09:00
Thomas Gleixner
286b9bfe8e sh: Fix irq cleanup fallout
I missed that coccinelle does not fix up header files by default.

Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: <lethal@linux-sh.org>
2011-03-30 00:15:49 +02:00
Thomas Gleixner
fcb8918fd2 sh: Convert to new function names
Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:13 +02:00
Thomas Gleixner
a821b2793e sh: Use the proper accessor functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:13 +02:00
Rafael J. Wysocki
a696b89c58 sh: Use struct syscore_ops instead of sysdevs
Convert the SuperH clocks framework and shared interrupt handling
code to using struct syscore_ops instead of a sysdev classes and
sysdevs for power managment.

This reduces the code size significantly and simplifies it.  The
optimizations causing things not to be restored after creating a
hibernation image are removed, but they might lead to undesirable
effects during resume from hibernation (e.g. the clocks would be left
as the boot kernel set them, which might be not the same way as the
hibernated kernel had seen them before the hibernation).

This also is necessary for removing sysdevs from the kernel entirely
in the future.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-23 18:57:37 +09:00
Magnus Damm
8a5a778665 sh: update INTC to clear IRQ sense valid flag
Clear the valid flag is in the INTC code.
Without this fix bit 7 of the sense register
is mistakenly set.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-19 19:02:35 +09:00
Alexey Dobriyan
57cc7215b7 headers: kobject.h redux
Remove kobject.h from files which don't need it, notably,
sched.h and fs.h.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10 08:51:44 -08:00
Paul Mundt
30f2ba3801 sh: intc: Initialize radix tree gfp mask explicitly.
Presently the root node is initialized by way of kzalloc on the parent
data structure, which by chance happens to do the bulk of what an
explicit initialization does with GFP_NOWAIT semantics. This however is
more by luck than by design, and as we ideally want to permit radix node
allocations access to the emergency pools anyways, add in the proper
initializer with the desired mask.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-24 19:38:37 +09:00
Paul Mundt
dfcd6e4389 Merge branch 'common/clkfwk' into sh-fixes-for-linus 2010-11-19 16:43:23 +09:00
Paul Mundt
f278ea849e sh: clkfwk: Build fix for non-legacy CPG changes.
The disabling of the init op for non-legacy clocks neglected to do the
same in the core clock framework, resulting in a build failure. Fix it
up.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-19 16:40:35 +09:00
Paul Mundt
849653372d Merge branch 'common/clkfwk' into sh-fixes-for-linus 2010-11-16 10:11:20 +09:00
Paul Mundt
35a96c739f sh: clkfwk: Kill off now unused algo_id in set_rate op.
Now that clk_set_rate_ex() is gone, there is also no way to get at rate
setting algo id, which is now also completely unused. Kill it off before
new clock ops start using it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-15 18:25:17 +09:00
Paul Mundt
9a1683d1dd sh: clkfwk: Kill off unused clk_set_rate_ex().
With the refactoring of the SH7722 clock framework some time ago this
abstraction has become unecessary. Kill it off before anyone else gets
the bright idea to start using it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-15 18:25:12 +09:00
Paul Mundt
6318af900c sh: intc: Fix up build failure introduced by radix tree changes.
The radix tree retry logic got a bit of an overhaul and subsequently
broke the virtual IRQ subgroup build. Simply switch over to
radix_tree_deref_retry() as per the filemap changes, which the virq
lookup logic was modelled after in the first place.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-15 14:30:30 +09:00
Paul Mundt
ed10b490ea sh: clkfwk: fix up compiler warnings.
CC      drivers/sh/clk/core.o
drivers/sh/clk/core.c: In function 'clk_round_parent':
drivers/sh/clk/core.c:574: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'unsigned int'
drivers/sh/clk/core.c:594: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'unsigned int'

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-10 18:02:25 +09:00
Paul Mundt
21e1426628 Merge branches 'sh/pio-death', 'sh/nommu', 'sh/clkfwk', 'sh/core' and 'sh/intc-extension' into sh-fixes-for-linus 2010-11-08 09:42:43 +09:00
Paul Mundt
a766b29790 sh: clkfwk: Fix up checkpatch warnings.
The clk_round_parent() change introduced various checkpatch warnings,
tidy them up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-08 09:40:23 +09:00
Guennadi Liakhovetski
6af26c6c99 sh: add clk_round_parent() to optimize parent clock rate
Sometimes it is possible and reasonable to adjust the parent clock rate to
improve precision of the child clock, e.g., if the child clock has no siblings.
clk_round_parent() is a new addition to the SH clock-framework API, that
implements such an optimization for child clocks with divisors, taking all
integer values in a range.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-08 09:35:26 +09:00
Paul Mundt
20f95e0b22 sh: intc: Update for single IRQ reservation helper.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-01 16:10:48 -04:00
Paul Mundt
5aefa34fad sh: clkfwk: Fix up rate rounding error handling.
According to the linux/clk.h definition we should be handing back an
errno value or a valid rate. This fixes up the case where 0 can be
returned for invalid frequencies or cases where rounding has no
selectable candidate.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-01 15:30:31 -04:00
Paul Mundt
63111a3a70 sh: intc: switch irq_desc iteration to new active IRQ iterator.
There's no need to iterative over every single irq_desc when we can
already work out which IRQs have a backing descriptor via the shiny new
for_each_active_irq(). Switch to that instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-28 11:36:31 +09:00
Paul Mundt
26599a94dc sh: intc: irq_data conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 15:42:10 +09:00
Paul Mundt
c053784454 sh: maple: ctrl_in/outX to __raw_read/writeX conversion.
The ctrl_xxx routines are deprecated, switch over to the __raw_xxx
versions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-27 14:34:41 +09:00
Paul Mundt
38ab13441c sh: Switch dynamic IRQ creation to generic irq allocator.
Now that the genirq code provides an IRQ bitmap of its own and the
necessary API to manipulate it, there's no need to keep our own version
around anymore.

In the process we kill off some unused IRQ reservation code, with future
users now having to tie in to the genirq API as normal.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-26 16:05:08 +09:00
Thomas Gleixner
c4318baf00 sh: Sanitize sparse irq
Switch over to the new allocator functions.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-26 15:01:52 +09:00
Paul Mundt
de9186c257 sh: clkfwk: Shuffle around to match the intc split up.
This shuffles the clock framework code around to a drivers/sh/clk subdir,
to follow the intc split up. This will make it easier to subsequently
break things out as well as plug in different helpers for non-CPG users.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-18 21:32:58 +09:00