Commit Graph

236 Commits

Author SHA1 Message Date
Alexey Dobriyan
f0f37e2f77 const: mark struct vm_struct_operations
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 11:39:25 -07:00
Linus Torvalds
b7f21bb2e2 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (21 commits)
  x86/PCI: make 32 bit NUMA node array int, not unsigned char
  x86/PCI: default pcibus cpumask to all cpus if it lacks affinity
  MAINTAINTERS: remove hotplug driver entries
  PCI: pciehp: remove slot capabilities definitions
  PCI: pciehp: remove error message definitions
  PCI: pciehp: remove number field
  PCI: pciehp: remove hpc_ops
  PCI: pciehp: remove pci_dev field
  PCI: pciehp: remove crit_sect mutex
  PCI: pciehp: remove slot_bus field
  PCI: pciehp: remove first_slot field
  PCI: pciehp: remove slot_device_offset field
  PCI: pciehp: remove hp_slot field
  PCI: pciehp: remove device field
  PCI: pciehp: remove bus field
  PCI: pciehp: remove slot_num_inc field
  PCI: pciehp: remove num_slots field
  PCI: pciehp: remove slot_list field
  PCI: fix VGA arbiter header file
  PCI: Disable AER with pci=nomsi
  ...

Fixed up trivial conflicts in MAINTAINERS
2009-09-24 09:57:08 -07:00
Len Brown
c602c65b2f Merge branch 'linus' into sfi-release
Conflicts:
	arch/x86/kernel/setup.c
	drivers/acpi/power.c
	init/main.c

Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-19 00:11:26 -04:00
Jesse Barnes
76baeebf7d x86/PCI: make 32 bit NUMA node array int, not unsigned char
We use -1 to indicate no node affinity, so we need a signed type here or
all sorts of bad things happen, like crashes in dev_attr_show as
reported by Ingo:

[  158.058140] warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
[  159.370562] BUG: unable to handle kernel NULL pointer dereference at (null)
[  159.372694] IP: [<ffffffff8143b722>] bitmap_scnprintf+0x72/0xd0
[  159.372694] PGD 71d3e067 PUD 7052e067 PMD 0
[  159.372694] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[  159.372694] last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/local_cpus
[  159.372694] CPU 0
[  159.372694] Pid: 7364, comm: irqbalance Not tainted 2.6.31-tip #8043 System Product Name
[  159.372694] RIP: 0010:[<ffffffff8143b722>]  [<ffffffff8143b722>] bitmap_scnprintf+0x72/0xd0
[  159.372694] RSP: 0018:ffff8800712a1e38  EFLAGS: 00010246
[  159.372694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  159.372694] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff880077dc5000
[  159.372694] RBP: ffff8800712a1e68 R08: 0000000000000001 R09: 0000000000000001
[  159.372694] R10: ffffffff8215c47c R11: 0000000000000000 R12: 0000000000000000
[  159.372694] R13: 0000000000000000 R14: 0000000000000ffe R15: ffff880077dc5000
[  159.372694] FS:  00007f5f578f76f0(0000) GS:ffff880007000000(0000) knlGS:0000000000000000
[  159.372694] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  159.372694] CR2: 0000000000000000 CR3: 0000000071a77000 CR4: 00000000000006f0
[  159.372694] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  159.372694] DR3: ffffffff835109dc DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  159.372694] Process irqbalance (pid: 7364, threadinfo ffff8800712a0000, task ffff880070773000)
[  159.372694] Stack:
[  159.372694]  2222222222222222 ffff880077dc5000 fffffffffffffffb ffff88007d366b40
[  159.372694] <0> ffff8800712a1f48 ffff88007d3840a0 ffff8800712a1e88 ffffffff8146332b
[  159.372694] <0> fffffffffffffff4 ffffffff82450718 ffff8800712a1ea8 ffffffff815a9a1f
[  159.372694] Call Trace:
[  159.372694]  [<ffffffff8146332b>] local_cpus_show+0x3b/0x60
[  159.372694]  [<ffffffff815a9a1f>] dev_attr_show+0x2f/0x60
[  159.372694]  [<ffffffff8118ee6f>] sysfs_read_file+0xbf/0x1d0
[  159.372694]  [<ffffffff8112afe9>] vfs_read+0xc9/0x180
[  159.372694]  [<ffffffff8112c365>] sys_read+0x55/0x90
[  159.372694]  [<ffffffff810114f2>] system_call_fastpath+0x16/0x1b
[  159.372694] Code: 41 b9 01 00 00 00 44 8d 46 03 49 63 fc 0f 49 d3 c1 f8 1f 4c 01 ff c1 e8 1a c1 fa 06 41 c1 e8 02 8d 0c 03 48 63 d2 83 e1 3f 29 c1 <49> 8b 44 d5 00 48 c7 c2 8c 37 16 82 48 d3 e8 89 f1 44 89 f6 49
[  159.372694] RIP  [<ffffffff8143b722>] bitmap_scnprintf+0x72/0xd0
[  159.372694]  RSP <ffff8800712a1e38>
[  159.372694] CR2: 0000000000000000
[  159.600828] ---[ end trace 35550c356e84e60c ]---

Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-18 09:13:57 -07:00
Linus Torvalds
4406c56d0a Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (75 commits)
  PCI hotplug: clean up acpi_run_hpp()
  PCI hotplug: acpiphp: use generic pci_configure_slot()
  PCI hotplug: shpchp: use generic pci_configure_slot()
  PCI hotplug: pciehp: use generic pci_configure_slot()
  PCI hotplug: add pci_configure_slot()
  PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface
  PCI hotplug: acpiphp: don't cache hotplug_params in acpiphp_bridge
  PCI hotplug: acpiphp: remove superfluous _HPP/_HPX evaluation
  PCI: Clear saved_state after the state has been restored
  PCI PM: Return error codes from pci_pm_resume()
  PCI: use dev_printk in quirk messages
  PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset()
  PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handle
  PCI Hotplug: acpiphp: find bridges the easy way
  PCI: pcie portdrv: remove unused variable
  PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI support
  ACPI PM: Replace wakeup.prepared with reference counter
  PCI PM: Introduce device flag wakeup_prepared
  PCI / ACPI PM: Rework some debug messages
  PCI PM: Simplify PCI wake-up code
  ...

Fixed up conflict in arch/powerpc/kernel/pci_64.c due to OF device tree
scanning having been moved and merged for the 32- and 64-bit cases.  The
'needs_freset' initialization added in 6e19314cc ("PCI/powerpc: support
PCIe fundamental reset") is now in arch/powerpc/kernel/pci_of_scan.c.
2009-09-16 07:49:54 -07:00
Jesse Barnes
2547089ca2 x86/PCI: initialize PCI bus node numbers early
The current mp_bus_to_node array is initialized only by AMD specific
code, since AMD platforms have registers that can be used for
determining mode numbers.  On new Intel platforms it's necessary to
initialize this array as well though, otherwise all PCI node numbers
will be 0, when in fact they should be -1 (indicating that I/O isn't
tied to any particular node).

So move the mp_bus_to_node code into the common PCI code, and
initialize it early with a default value of -1.  This may be overridden
later by arch code (e.g. the AMD code).

With this change, PCI consistent memory and other node specific
allocations (e.g. skbuff allocs) should occur on the "current" node.
If, for performance reasons, applications want to be bound to specific
nodes, they should open their devices only after being pinned to the
CPU where they'll run, for maximum locality.

Acked-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Jesse Brandeburg <jesse.brandeburg@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:29:21 -07:00
Tejun Heo
3e5cd1f257 dmi: extend dmi_get_year() to dmi_get_date()
There are cases where full date information is required instead of
just the year.  Add month and day parsing to dmi_get_year() and rename
it to dmi_get_date().

As the original function only required '/' followed by any number of
parseable characters at the end of the string, keep that behavior to
avoid upsetting existing users.

The new function takes dates of format [mm[/dd]]/yy[yy].  Year, month
and date are checked to be in the ranges of [1-9999], [1-12] and
[1-31] respectively and any invalid or out-of-range component is
returned as zero.

The dummy implementation is updated accordingly but the return value
is updated to indicate field not found which is consistent with how
other dummy functions behave.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-08 21:17:48 -04:00
Feng Tang
5f0db7a2fb SFI: Hook PCI MMCONFIG
First check ACPI, and if that fails, ask SFI to find the MCFG.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-28 19:57:34 -04:00
Len Brown
f4a2d5840e ACPI, PCI: Change PREFIX to "PCI" from "ACPI" in mmconfig-shared.c
Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-28 19:57:28 -04:00
Len Brown
a192a9580b ACPI: Move definition of PREFIX from acpi_bus.h to internal..h
Linux/ACPI core files using internal.h all PREFIX "ACPI: ",
however, not all ACPI drivers use/want it -- and they
should not have to #undef PREFIX to define their own.

Add GPL commment to internal.h while we are there.

This does not change any actual console output,
asside from a whitespace fix.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28 19:57:27 -04:00
Yinghai Lu
857fdc53a0 x86/pci: insert ioapic resource before assigning unassigned resources
Stephen reported that his DL585 G2 needed noapic after 2.6.22 (?)

Dann bisected it down to:
  commit 30a18d6c3f
  Date:   Tue Feb 19 03:21:20 2008 -0800

      x86: multi pci root bus with different io resource range, on
      64-bit

It turns out that:
  1. that AMD-based systems have two HT chains.
  2. BIOS doesn't allocate resources for BAR 6 of devices under 8132 etc
  3. that multi-peer-root patch will try to split root resources to peer
     root resources according to PCI conf of NB
  4. PCI core assigns unassigned resources, but they overlap with BARs
     that are used by ioapic addr of io4 and 8132.

The reason: at that point ioapic address are not inserted yet.  Solution
is to insert ioapic resources into the tree a bit earlier.

Reported-by: Stephen Frost <sfrost@snowman.net>
Reported-and-Tested-by: dann frazier <dannf@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@jbarnes-g45.(none)>
2009-07-10 13:03:14 -07:00
Yinghai Lu
626fdfec15 x86/PCI: get root CRS before scanning children
This allows us to remove adjust_transparent_bridge_resources and give
x86_pci_root_bus_res_quirks a chance when _CRS is not used or not there.

Acked-by: Gary Hade <garyhade@us.ibm.com>
Tested-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-30 13:44:24 -07:00
Yinghai Lu
2cdb3f1d83 x86/PCI: fix boundary checking when using root CRS
Don't touch info->res_num if we are out of space.

Acked-by: Gary Hade <garyhade@us.ibm.com>
Tested-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-30 13:43:57 -07:00
Linus Torvalds
236e946b53 Revert "PCI: use ACPI _CRS data by default"
This reverts commit 9e9f46c44e.

Quoting from the commit message:

 "At this point, it seems to solve more problems than it causes, so let's
  try using it by default.  It's an easy revert if it ends up causing
  trouble."

And guess what? The _CRS code causes trouble.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24 16:23:03 -07:00
Len Brown
fbe8cddd2d Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', 'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release 2009-06-24 01:19:50 -04:00
Linus Torvalds
59ef7a83f1 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits)
  PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write
  PCI: Fix the NIU MSI-X problem in a better way
  PCI ASPM: remove get_root_port_link
  PCI ASPM: cleanup pcie_aspm_sanity_check
  PCI ASPM: remove has_switch field
  PCI ASPM: cleanup calc_Lx_latency
  PCI ASPM: cleanup pcie_aspm_get_cap_device
  PCI ASPM: cleanup clkpm checks
  PCI ASPM: cleanup __pcie_aspm_check_state_one
  PCI ASPM: cleanup initialization
  PCI ASPM: cleanup change input argument of aspm functions
  PCI ASPM: cleanup misc in struct pcie_link_state
  PCI ASPM: cleanup clkpm state in struct pcie_link_state
  PCI ASPM: cleanup latency field in struct pcie_link_state
  PCI ASPM: cleanup aspm state field in struct pcie_link_state
  PCI ASPM: fix typo in struct pcie_link_state
  PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS
  PCI: remove redundant __msi_set_enable()
  PCI PM: consistently use type bool for wake enable variable
  x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded
  ...
2009-06-22 11:59:51 -07:00
Matthew Wilcox
a76117dfd6 x86: Use pci_claim_resource
Instead of open-coding pci_find_parent_resource and request_resource,
just call pci_claim_resource.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 14:04:42 -07:00
Gary Hade
f9cde5ffed x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded
Issue a warning if _CRS returns too many resource descriptors to be
accommodated by the fixed size resource array instances.  If there is no
transparent bridge on the root bus "too many" is the
PCI_BUS_NUM_RESOURCES size of the resource array.  Otherwise, the last 3
slots of the resource array must be excluded making the maximum
(PCI_BUS_NUM_RESOURCES - 3).

The current code:
 - is silent when _CRS returns too many resource descriptors and
 - incorrectly allows use of the last 3 slots of the resource array
   for a root bus with a transparent bridge

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-16 14:53:32 -07:00
Len Brown
c4bf2f372d ACPI, PCI, x86: move MCFG parsing routine from ACPI to PCI file
Move
arch/x86/kernel/acpi/boot.c: acpi_parse_mcfg()
to
arch/x86/pci/mmconfig-shared.c: pci_parse_mcfg()
where it is used, and make it static.

Move associated globals and helper routine with it.

No functional change.

This code move is in preparation for SFI support,
which will allow the PCI code to find the MCFG table
on systems which do not support ACPI.

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-12 20:50:38 -04:00
Jesse Barnes
9e9f46c44e PCI: use ACPI _CRS data by default
At this point, it seems to solve more problems than it causes, so let's try using it by default.  It's an easy revert if it ends up causing trouble.

Reviewed-by: Yinghai Lu <yhlu.kernel@gmail.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:17 -07:00
Linus Torvalds
f0d5e12bd4 Merge branch 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (76 commits)
  x86, apic: Fix dummy apic read operation together with broken MP handling
  x86, apic: Restore irqs on fail paths
  x86: Print real IOAPIC version for x86-64
  x86: enable_update_mptable should be a macro
  sparseirq: Allow early irq_desc allocation
  x86, io-apic: Don't mark pin_programmed early
  x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabled
  x86, irq: update_mptable needs pci_routeirq
  x86: don't call read_apic_id if !cpu_has_apic
  x86, apic: introduce io_apic_irq_attr
  x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix
  x86: read apic ID in the !acpi_lapic case
  x86: apic: Fixmap apic address even if apic disabled
  x86: display extended apic registers with print_local_APIC and cpu_debug code
  x86: read apic ID in the !acpi_lapic case
  x86: clean up and fix setup_clear/force_cpu_cap handling
  x86: apic: Check rev 3 fadt correctly for physical_apic bit
  x86/pci: update pirq_enable_irq() to setup io apic routing
  x86/acpi: move setup io apic routing out of CONFIG_ACPI scope
  x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
  ...
2009-06-10 15:25:41 -07:00
Yinghai Lu
75e613cdc7 x86/pci: fix mmconfig detection with 32bit near 4g
Pascal reported and bisected a commit:
|	x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case

which broke one system system.

ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space

it didn't have
PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
anymore, and try to use 0xf000000 - 0xffffffff for mmconfig

For 32bit, mcfg_res->end could be 32bit only (if 64 resources aren't used)
So use end - 1 to pass the value in mcfg->end to avoid overflow.

We don't need to worry about the e820 path, they are always 64 bit.

Reported-by: Pascal Terjan <pterjan@mandriva.com>
Bisected-by: Pascal Terjan <pterjan@mandriva.com>
Tested-by: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-04 11:31:13 +01:00
Yinghai Lu
e5198075c6 x86, apic: introduce io_apic_irq_attr
according to Ingo, io_apic irq-setup related functions have too many
parameters with a repetitive signature.

So reduce related funcs to get less params by passing a pointer
to a newly defined io_apic_irq_attr structure.

v2: io_apic_irq ==> irq_attr
    triggering ==> trigger

v3: add set_io_apic_irq_attr

[ Impact: cleanup ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A08ACD3.2070401@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 08:38:55 +02:00
Ingo Molnar
6cda3eb62e Merge branch 'x86/apic' into irq/numa
Merge reason: both topics modify the APIC code but were able to do it in
              parallel so far. An upcoming patch generates a conflict so
              merge them to avoid the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 12:17:36 +02:00
Yinghai Lu
b9c61b7007 x86/pci: update pirq_enable_irq() to setup io apic routing
So we can set io apic routing only when enabling the device irq.

This is advantageous for IRQ descriptor allocation affinity: if we set up
the IO-APIC entry later, we have a chance to allocate the IRQ descriptor
later and know which device it is on and can set affinity accordingly.

[ Impact: standardize/enhance irq-enabling sequence for mptable irqs ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A01C46E.8000501@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:35:10 +02:00
Yinghai Lu
e20c06fd69 x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
To prepare those params for pcibios_irq_enable() to call setup_io_apic_routing().

[ Impact: extend function call API to prepare for new functionality ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A01C406.2040303@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:35:09 +02:00
Yinghai Lu
b10ceb5530 x86/PCI: don't bother with root quirks if _CRS is used
It will be overwriten later if _CRS is used, so don't bother to set it.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 15:06:29 -07:00
Yinghai Lu
0e94ecd098 x86/PCI: set_pci_bus_resources_arch_default cleanups
Rename set_pci_bus_resources_arch_default to x86_pci_root_bus_res_quirks, move
the weak version from common.c to i386.c, and before calling, make sure it's a
root bus.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 14:47:46 -07:00
Matthew Wilcox
0bb1be3e30 x86/PCI: Move set_pci_bus_resources_arch_default into arch/x86
Commit 30a18d6c3f introduced a new
function to set the PCI bus resources.  Unfortunately, neither the
author, nor the committers seemed to know that we already have somewhere
to do that -- pcibios_fixup_bus().  This patch moves the hook (used only
by the K8 code) into x86-specific code where it should have been in the
first place.

Cc: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 13:57:36 -07:00
Yinghai Lu
044cd80942 x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case
e820_all_mapped need end is (addr + size) instead of (addr + size - 1)

Cc: stable@kernel.org
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 13:56:26 -07:00
Suresh Siddha
5a3ae27605 x86, PAT: Remove duplicate memtype reserve in pci mmap
pci mmap code was doing memtype reserve for a while now. Recently we
added memtype tracking in remap_pfn_range, and pci code indirectly calls
remap_pfn_range. So, we don't need seperate tracking in pci code
anymore. Which means a patch that removes ~50 lines of code :-).

Also, recently we found out that the pci tracking is not working as we expect
it to work in some cases. Specifically, userlevel X mmap of pci, with some
recent version of X, is having a problem with vm_page_prot getting reset.
The pci tracking uses vm_page_prot to pass on the protection type from parent
to child during fork.
a) Parent does a pci mmap
b) We look at PAT and get either UC_MINUS or WC mapping for parent
c) Store that mapping type in vma vm_page_prot for future use
d) This thread does a fork
e) Fork results in mmap_ops ->open for the child process
f) We get the vm_page_prot from vma and reserve that type for the child process

But, between c) and e) above, the vma vm_page_prot is getting reset to zero.
This results in PAT reserve failing at the time of fork as in here.
http://marc.info/?l=linux-kernel&m=123858163103240&w=2

This cleanup makes the above problem go away as we do not depend on
vm_page_prot in our PAT code anymore.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 14:43:29 -07:00
Linus Torvalds
e76e5b2c66 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
  PCI: fix HT MSI mapping fix
  PCI: don't enable too much HT MSI mapping
  x86/PCI: make pci=lastbus=255 work when acpi is on
  PCI: save and restore PCIe 2.0 registers
  PCI: update fakephp for bus_id removal
  PCI: fix kernel oops on bridge removal
  PCI: fix conflict between SR-IOV and config space sizing
  powerpc/PCI: include pci.h in powerpc MSI implementation
  PCI Hotplug: schedule fakephp for feature removal
  PCI Hotplug: rename legacy_fakephp to fakephp
  PCI Hotplug: restore fakephp interface with complete reimplementation
  PCI: Introduce /sys/bus/pci/devices/.../rescan
  PCI: Introduce /sys/bus/pci/devices/.../remove
  PCI: Introduce /sys/bus/pci/rescan
  PCI: Introduce pci_rescan_bus()
  PCI: do not enable bridges more than once
  PCI: do not initialize bridges more than once
  PCI: always scan child buses
  PCI: pci_scan_slot() returns newly found devices
  PCI: don't scan existing devices
  ...

Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
2009-04-01 09:47:12 -07:00
Yinghai Lu
e42d1fe804 x86/PCI: make pci=lastbus=255 work when acpi is on
Impact: scan more peer root buses even acpi is used

Move pci_bios_fixup_peer_bridges out of pci_legacy_init and into
pci_subsys_init.  This allows pci_bios_fixup_peer_bridges to be called
even pci_apci_init is driving PCI initialization.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-26 16:07:49 -07:00
Pallipadi, Venkatesh
9cdec04938 x86, PAT, PCI: Change vma prot in pci_mmap to reflect inherited prot
While looking at the issue in the thread:

  http://marc.info/?l=dri-devel&m=123606627824556&w=2

noticed a bug in pci PAT code and memory type setting.

PCI mmap code did not set the proper protection in vma, when it
inherited protection in reserve_memtype. This bug only affects
the case where there exists a WC mapping before X does an mmap
with /proc or /sys pci interface. This will cause X userlevel
mmap from /proc or /sysfs to fail on fork.

Reported-by: Kevin Winchester <kjwinchester@gmail.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: <stable@kernel.org>
LKML-Reference: <20090323190720.GA16831@linux-os.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24 10:42:35 +01:00
Yinghai Lu
068258bc15 x86/PCI: host mmconfig detect clean up
Fix mmconfig detection to not assume a single mmconfig space in the
northbridge, paving the way for AMD fam10h + mcp55 CPUs.  On those, the
MSR has some range, but the mcp55 pci config will have another one.

Also helps the mcp55 + io55 case, where every one will have one range.

If it is mcp55, exclude the range that is used by CPU MSR, in other
words , if the CPU claims busses 0-255, the range in mcp55 is dropped,
because CPU HW will not route those ranges to mcp55 mmconfig to handle
it.

Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 11:40:22 -07:00
Ed Swierk
5546d6f568 x86/PCI: Detect mmconfig on nVidia MCP55
Detect and enable memory-mapped PCI configuration space on the nVidia
MCP55 southbridge.  Tested against 2.6.27.4 on an Arista Networks
development board with one MCP55, Coreboot firmware, no ACPI.

Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 11:34:37 -07:00
Yinghai Lu
dfadd9edff PCI/x86: detect host bridge config space size w/o using quirks
Many host bridges support a 4k config space, so check them directy
instead of using quirks to add them.

We only need to do this extra check for host bridges at this point,
because only host bridges are known to have extended address space
without also having a PCI-X/PCI-E caps.  Other devices with this
property could be done with quirks (if there are any).

As a bonus, we can remove the quirks for AMD host bridges with family
10h and 11h since they're not needed any more.

With this patch, we can get correct pci cfg size of new Intel CPUs/IOHs
with host bridges.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:17 -07:00
Bjorn Helgaas
7bc9e77dcc PCI/x86: format early dump like other PCI output
Use %02x:%02x.%d rather than %02x:%02x:%02x so PCI addresses
look the same as in other parts of the kernel.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19 19:29:18 -07:00
Bjorn Helgaas
600914ba52 PCI/x86: make early dump handle multi-function devices
The early "dump PCI config space" code skips many multi-function
devices.  This patch fixes that, so it dumps all devices in PCI
domain 0.

We should not skip the rest of the functions if CLASS_REVISION is
0xffffffff.  Often multi-function devices have gaps in the function ID
space, e.g., 1c.0 and 1c.2 exist but 1c.1 doesn't.  The CLASS_REVISION
of the non-existent 1c.1 function will appear to be 0xffffffff.

We should only look at the HEADER_TYPE of function zero.  Often the
"multi-function" is set in function zero, but not in other functions.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19 19:29:18 -07:00
Jan Beulich
821508d4ef x86: move a few device initialization objects into .devinit.rodata
Impact: debuggability and micro-optimization

Putting whatever is possible into the (final) .rodata section increases
the likelihood of catching memory corruption bugs early, and reduces
false cache line sharing.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <49B909A5.76E4.0078.0@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12 13:12:19 +01:00
Ingo Molnar
7b6aa335ca x86, apic: remove genapic.h
Impact: cleanup

Remove genapic.h and remove all references to it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 17:52:44 +01:00
Ingo Molnar
4f179d1218 x86, numaq: cleanups
Also move xquad_portio over to where it's allocated.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 22:30:14 +01:00
Ingo Molnar
9d45cf9e36 Merge branch 'x86/urgent' into x86/apic
Conflicts:
	arch/x86/mach-default/setup.c

Semantic merge:
	arch/x86/kernel/irqinit_32.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 22:30:01 +01:00
Ingo Molnar
1164dd0099 x86: move mach-default/*.h files to asm/
We are getting rid of subarchitecture support - move the hook files
to asm/. (These are now stale and should be replaced with more explicit
runtime mechanisms - but the transition is simpler this way.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 14:16:51 +01:00
Ingo Molnar
5a44632f77 x86, numaq: consolidate code
Move all the NUMAQ subarch definitions into numaq.c. With this it
ceases to depend on build-time subarch features.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:37 +01:00
Seth Heasley
57064d213d PCI: irq and pci_ids patch for Intel Tigerpoint DeviceIDs
This patch adds the Intel Tigerpoint LPC Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-27 09:46:08 -08:00
venkatesh.pallipadi@intel.com
afc7d20c84 x86 PAT: consolidate old memtype new memtype check into a function
Impact: cleanup

Move the new memtype old memtype allowed check to header so that is can be
shared by other users. Subsequent patch uses this in pat.c in remap_pfn_range()
code path. No functionality change in this patch.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-13 19:13:00 +01:00
Rafael J. Wysocki
16cf0ebc35 x86/PCI: Do not use interrupt links for devices using MSI-X
pcibios_enable_device() and pcibios_disable_device() don't handle
IRQs for devices that have MSI enabled and it should treat the
devices with MSI-X enabled in the same way.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:25 -08:00
Bjorn Helgaas
2b8c2efe44 x86/PCI: use dev_printk for PCI bus locality messages
Since pci_bus has a struct device, use dev_printk directly instead
of faking it by hand.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:19 -08:00
Bjorn Helgaas
904d6a3033 PCI: x86/visws: use generic INTx swizzle from PCI core
Use the generic pci_common_swizzle() instead of arch-specific code.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:16 -08:00