Commit Graph

147 Commits

Author SHA1 Message Date
Jeremy Fitzhardinge
9662e08024 ACPI: thinkpad-acpi: wan radio control is not experimental
The WWAN radio control has been working well for over three years,
and is no longer experimental.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-28 19:24:49 +02:00
Henrique de Moraes Holschuh
bf20e740a4 ACPI: thinkpad-acpi: don't misdetect in get_thinkpad_model_data() on -ENOMEM
Explicitly check for memory allocation failures, and return status to
indicate that we could not collect data due to errors.

This lets the driver have a far more predictable failure mode on ENOMEM in
that codepath: it will refuse to load.  This is far better than trying to
proceed with missing data which is used to detect quirks, etc.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
2008-07-21 09:15:51 -03:00
Henrique de Moraes Holschuh
490673dc98 ACPI: thinkpad-acpi: bump up version to 0.21
rfkill support deserves a new version checkpoint...

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
2008-07-21 09:15:51 -03:00
Henrique de Moraes Holschuh
0e74dc2646 ACPI: thinkpad-acpi: add bluetooth and WWAN rfkill support
Add a read/write rfkill interface to the bluetooth radio switch on the
bluetooth submodule, and one for the wireless wan radio switch to the wan
submodule.

Since rfkill does care for when a switch changes state, use WLSW
notifications to also check if the WWAN or Bluetooth switches did not
change state (due to them being slaves of WLSW in firmware/hardware, but
that reality not being always properly exported by the thinkpad firmware).

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ivo van Doorn <IvDoorn@gmail.com>
Cc: John W. Linville <linville@tuxdriver.com>
2008-07-21 09:15:51 -03:00
Henrique de Moraes Holschuh
133ec3bd3a ACPI: thinkpad-acpi: WLSW overrides other rfkill switches
On ThinkPads where the WLSW switch exists, the firmware or the hardware
ANDs the WLSW state with the device-specific switches (WWAN, Bluetooth).
It is downright impossible to enable WWAN or Bluetooth when WLSW is
blocking the radios.

This reality does not necessarily carry over to the WWAN and Bluetooth
firmware interfaces, though... so the state thinkpad-acpi was reporting
could be incorrect.

Tie the three switches in the driver so that we keep their state sane.
When WLSL is off, force the other switches to off as well.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
2008-07-21 09:15:50 -03:00
Henrique de Moraes Holschuh
07431ec82b ACPI: thinkpad-acpi: prepare for bluetooth and wwan rfkill support
Get rid of some forward definitions by moving code around, this will make
the rfkill conversion of wwan and bluetooth a bit cleaner.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
2008-07-21 09:15:50 -03:00
Henrique de Moraes Holschuh
733e27c1cc ACPI: thinkpad-acpi: consolidate wlsw notification function
Rename tpacpi_input_send_radiosw() to tpacpi_send_radiosw_update(), and
make it a central point to issue "radio switch changed state" notifications
by consolidating also the poll() notification in the same function.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
2008-07-21 09:15:49 -03:00
Henrique de Moraes Holschuh
3a87208028 ACPI: thinkpad-acpi: minor refactor on radio switch init
Change the code of hotkey_init, wan_init and bluetooth_init a bit to make it
much easier to add some Kconfig-selected debugging code later.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
2008-07-21 09:15:49 -03:00
Henrique de Moraes Holschuh
24e45bbe69 thinkpad-acpi: fix LED handling on older ThinkPads
The less tested codepaths for LED handling, used on ThinkPads 570, 600e/x,
770e, 770x, A21e, A2xm/p, T20-22, X20 and maybe a few others, would write
data to kernel memory it had no business touching, for leds number 3 and
above.  If one is lucky, that illegal write would cause an OOPS, but
chances are it would silently corrupt a byte.

The problem was introduced in commit af116101, "ACPI: thinkpad-acpi: add
sysfs led class support to thinkpad leds (v3.2)".

Fix the bug by refactoring the entire code to be far more obvious on what
it wants to do.  Also do some defensive "constification".

Issue reported by Karol Lewandowski <lmctlx@gmail.com> (he's an lucky guy
and got an OOPS instead of silent corruption :-) ).

Root cause of the OOPS identified by Adrian Bunk <bunk@kernel.org>.
Thanks, Adrian!

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Tested-by: Karol Lewandowski <lmctlx@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11 19:13:45 -04:00
Henrique de Moraes Holschuh
9c0a76e16e thinkpad-acpi: fix initialization error paths
Rework some subdriver init and exit handlers, in order to fix some
initialization error paths that were missing, or broken.

Hitting those bugs should be extremely rare in the real world, but should
that happen, thinkpad-acpi would fail to dealocate some resources and a
reboot might well be needed to be able to load the driver again.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11 19:13:45 -04:00
Henrique de Moraes Holschuh
197a2cd907 thinkpad-acpi: SW_RADIO to SW_RFKILL_ALL rename
Rename SW_RADIO to SW_RFKILL_ALL in thinkpad-acpi code and docs, following
5adad01339 "Input: rename SW_RADIO to
SW_RFKILL_ALL".

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11 19:13:45 -04:00
Harvey Harrison
e3aa51fecd acpi: fix sparse const errors
In this case we want a constant pointer to constant chars:

drivers/misc/thinkpad_acpi.c:3824:19: error: Just how const do you want this type to be?

Like the error says.

drivers/misc/thinkpad_acpi.c:3863:19: error: Just how const do you want this type to be?
drivers/misc/thinkpad_acpi.c:3864:19: error: Just how const do you want this type to be?
drivers/misc/thinkpad_acpi.c:3865:19: error: Just how const do you want this type to be?
drivers/misc/thinkpad_acpi.c:3866:19: error: Just how const do you want this type to be?

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-30 07:43:24 -07:00
Len Brown
96916090f4 Merge branches 'release', 'acpica', 'bugzilla-10224', 'bugzilla-9772', 'bugzilla-9916', 'ec', 'eeepc', 'idle', 'misc', 'pm-legacy', 'sysfs-links-2.6.26', 'thermal', 'thinkpad' and 'video' into release 2008-04-30 13:58:00 -04:00
Cyrill Gorcunov
90fe17f4df thinkpad_acpi: fix possible NULL pointer dereference if kstrdup failed
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 10:10:03 -04:00
Henrique de Moraes Holschuh
68f12ae5d7 ACPI: thinkpad-acpi: bump up version to 0.20
Full LED sysfs support, and the rest of the assorted minor fixes and
enhancements are a good reason to checkpoint a new version...

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 09:47:03 -04:00
Henrique de Moraes Holschuh
e0e3c0615a ACPI: thinkpad-acpi: use a private workqueue
Switch all task workers to a private thinkpad-acpi workqueue.

This way, we don't risk causing trouble for other tasks scheduled to the
default work queue, as our workers end up needing to access the ACPI EC,
run ACPI AML code, trigger SMI traps... and none of those are exactly known
to be fast, simple operations.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 09:47:03 -04:00
Henrique de Moraes Holschuh
10cc92759b ACPI: thinkpad-acpi: fluff really minor fix
Fix a minor (nano?) thing that bothered me at exactly at the wrong time.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 09:47:02 -04:00
Henrique de Moraes Holschuh
af11610192 ACPI: thinkpad-acpi: add sysfs led class support to thinkpad leds (v3.2)
Add a sysfs led class interface to the led subdriver.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 09:47:02 -04:00
Henrique de Moraes Holschuh
e306501d1c ACPI: thinkpad-acpi: add sysfs led class support for thinklight (v3.1)
Add a sysfs led class interface to the thinklight (light subdriver).

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 09:47:01 -04:00
Henrique de Moraes Holschuh
4fa6811b8a ACPI: thinkpad-acpi: prepare light and LED for sysfs support
Do some preparatory work to add sysfs support to the thinklight and
thinkpad leds driver.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 09:47:01 -04:00
Henrique de Moraes Holschuh
95e57ab2cb ACPI: thinkpad-acpi: claim tpacpi as an official short handle (v1.1)
Unfortunately, a lot of stuff in the kernel has size limitations, so
"thinkpad-acpi" ends up eating up too much real estate.  We were using
"tpacpi" in symbols already, but this shorthand was not visible to
userland.

Document that the driver will use tpacpi as a short hand where necessary,
and use it to name the kernel thread for NVRAM polling (now named
"ktpacpi_nvramd").

Also, register a module alias with the shorthand.  One can refer to the
module using the shorthand name.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 09:47:01 -04:00
Henrique de Moraes Holschuh
e11aecf137 ACPI: thinkpad-acpi: fix brightness dimming control bug
ibm-acpi and thinkpad-acpi did not know about bit 5 of the EC backlight
level control register (EC 0x31), so it was always forced to zero on
any writes.

This would disable the BIOS option to *not* use a dimmer backlight level
scale while on battery, and who knows what else (there are two other
control bits of unknown function).

Bit 5 controls the "reduce backlight levels when on battery" optional
functionality (active low).  Bits 6 and 7 are better left alone as well,
instead of being forced to zero.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 09:47:01 -04:00
Henrique de Moraes Holschuh
2d5e94d7ca ACPI: thinkpad-acpi: rate-limit CMOS/EC unsynced error messages
If userspace applications mess with the CMOS NVRAM, or something causes
both the ACPI firmware and thinkpad-acpi to try to change the brightness at
the same time, it is possible to have the CMOS and EC registers for the
current brightness go out of sync.

Should that happen, thinkpad-acpi could be really obnoxious when using a
brightness_mode of 3 (both EC and CMOS).  Instead of complaining a massive
number of times, make sure to complain only once until EC and CMOS are back
in sync.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Joerg Platte <lists@naasa.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 09:47:00 -04:00
Henrique de Moraes Holschuh
8c74adbc69 ACPI: thinkpad-acpi: enhance box identification output (v2)
During initialization, thinkpad-acpi outputs some messages to make sure
releavant box identification information is easily available in-line with
the rest of the driver messages.

Enhance those messages to output the alfanumeric model number as well.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 09:47:00 -04:00
Henrique de Moraes Holschuh
9288902225 ACPI: thinkpad-acpi: warn once about weird hotkey masks
thinkpad-acpi knows for a while now how to best program the hotkeys by
default, and always enable them by default.  Unfortunately, this
information has not filtered down everywhere it needs to, yet.  Notably,
old ibm-acpi documentation and most "thinkpad setup guides" will have wrong
information on this area.

Warn the local admin once whenever any of the following patterns are met:

1. Attempts to set hotkey mask to 0xffff (artifact from docs and config
   for the old ibm-acpi driver and behaviour).  This mask makes no
   real-world sense;

2. Attempts to set hotkey mask to 0xffffffff, which means the user is
   trying to just have "everything work" without even reading the
   documentation, or that we need to get a bug report, because there
   is a new thinkpad out there with new exciting hot keys :-)

3. Attempts to set hotkey mask to 0xffffff, which is almost never the
   correct way to set up volume and brightness event reporting (and with
   the current state-of-the-art, it is known to never be right way to do
   it).

The driver will perform any and all requested operations, though,
regardless of any warnings.  I hope these warnings can be removed one or
two years from now.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 09:47:00 -04:00
Henrique de Moraes Holschuh
b59727965d ACPI: thinkpad-acpi: BIOS backlight mode helper (v2.1)
Lenovo ThinkPads with generic ACPI backlight level control can be easily
set to react to keyboard brightness key presses in a more predictable way
than what they do when in "DOS / bootloader" mode after Linux brings
up the ACPI interface.

The switch to the ACPI backlight mode in the firmware is designed to be
safe to use only as an one way trapdoor.  One is not to force the firmware
to switch back to "DOS/bootloader" mode except by rebooting.  The mode
switch itself is performed by calling any of the ACPI _BCL methods at least
once.

When in ACPI mode, the backlight firmware just issues (standard) events for
the brightness up/down hot key presses along with the non-standard HKEY
events which thinkpad-acpi traps, and doesn't touch the hardware.

thinkpad-acpi will:

1. Place the ThinkPad firmware in ACPI backlight control mode
   if one is available
2. Suppress HKEY backlight change notifications by default
   to avoid double-reporting when ACPI video is loaded when
   the ThinkPad is in ACPI backlight control mode
3. Urge the user to load the ACPI video driver

The user is free to use either the ACPI video driver to get the brightness
key events, or to override the thinkpad-acpi default hotkey mask to get
them from thinkpad-acpi as well (this will result in duplicate events if
ACPI video is loaded, so let's hope distros won't screw this up).

Provided userspace is sane, all should work (and *keep* working), which is
more that can be said about the non-ACPI mode of the new Lenovo ThinkPad
BIOSes when coupled to current userspace and X.org drivers.

Full guidelines for backlight hot key reporting and use of the
thinkpad-acpi backlight interface have been added to the documentation.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-04-29 09:46:59 -04:00
Henrique de Moraes Holschuh
cee47f5a32 ACPI: thinkpad-acpi: fix hotkey_get_tablet_mode
I used the wrong return convention on hotkey_get_tablet_mode(), breaking a lot
of stuff.  Bad Henrique!

Fix it to return the status in the parameter-by-reference, and IO status on
the function return value.  Duh.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Lukas Hejtmanek <xhejtman@ics.muni.cz>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04 16:35:16 -08:00
Henrique de Moraes Holschuh
6c231bd5eb ACPI: thinkpad-acpi: add tablet-mode reporting
A quick study of the 0x5009/0x500A HKEY event on the X61t DSDT revealed the
existence of the EC HTAB register (EC 0x0f, bit 7), and a compare with the
X41t DSDT shows that HKEY.MHKG can be used to verify if the ThinkPad is
tablet-capable (MHKG present), and in tablet mode (bit 3 of MHKG return is
set).

Add an attribute to report this information, "hotkey_tablet_mode".  This
attribute has poll()/select() support, and can be used along with EV_SW
SW_TABLET_MODE to hook userspace to tablet events.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-16 00:34:06 -05:00
Henrique de Moraes Holschuh
d147da73c9 ACPI: thinkpad-acpi: minor hotkey_radio_sw fixes
Fixes some minor points in the radio switch code and docs.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-16 00:34:04 -05:00
Henrique de Moraes Holschuh
b3ec6f911a ACPI: thinkpad-acpi: issue input events for tablet swivel events
Issue EV_SW SW_TABLET_MODE events for HKEY events 0x5009 and 0x500A on the
X41t/X60t/X61t.  As usual, we suppress the HKEY events on the netlink
interface to avoid sending duplicate events to userspace.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-16 00:34:01 -05:00
Henrique de Moraes Holschuh
d7c1d17dfe ACPI: thinkpad-acpi: make the video output feature optional
The video output port control feature is not very useful on many ThinkPads
(especially when a X server is running), and lately userspace is getting
better and better at it, so it makes sense to allow users to stripe out the
thinkpad-acpi video feature from their kernels and save at least 2KB.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-16 00:33:59 -05:00
Henrique de Moraes Holschuh
7526696a01 ACPI: thinkpad-acpi: synchronize input device switches
Issue EV_SW events at module init time to synchronize the input device with
the current state of the switch, otherwise we might lose the first event.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-16 00:33:57 -05:00
Henrique de Moraes Holschuh
1bc6b9cdd5 ACPI: thinkpad-acpi: always track input device open/close
The open() and close() hooks for the input device are useful even when
hotkey NVRAM polling support is not in use, so it is better to always have
them around.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-16 00:33:55 -05:00
Henrique de Moraes Holschuh
cbb1484213 ACPI: thinkpad-acpi: trivial fix to module_desc typo
Thanks to Damjan <gdamjan@mail.net.mk> for noticing this one.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-16 00:33:44 -05:00
Adrian Bunk
1d5a2b54f3 thinkpad_acpi: static
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-14 01:01:28 -05:00
Roel Kluin
547266e46c ACPI: thinkpad-acpi: second TP_EC_FAN_FULLSPEED should be TP_EC_FAN_AUTO
fix bug in safety net for TPEC fan control mode
eaa7571b2d

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07 01:17:21 -05:00
Henrique de Moraes Holschuh
1cee5cce97 ACPI: thinkpad-acpi: bump up version to 0.19
The major code reorganization and cleanups, and new HKEY events, plus
poll()/select() support are good reasons to checkpoint a new version...

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:08 -05:00
Henrique de Moraes Holschuh
6a2e293c34 ACPI: thinkpad-acpi: update copyright dates to 2008
Update the copyright headers to include 2008.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:08 -05:00
Henrique de Moraes Holschuh
50ebec09f1 ACPI: thinkpad-acpi: add poll() support to some sysfs attributes
Implement poll()/select() support through sysfs_notify() for some key
attributes which userspace might want to poll() or select() on.

In order to let userspace know poll()/select() support is available for an
attribute, the thinkpad-acpi sysfs interface version is also bumped up.
Further changes that add poll()/select() capabilities to any pre-existing
attributes will also increment the sysfs interface version.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:08 -05:00
Henrique de Moraes Holschuh
013c40e457 ACPI: thinkpad-acpi: silence _sta warning
When both CONFIG_THINKPAD_ACPI_DOCK and CONFIG_THINKPAD_ACPI_BAY are
undefined, _sta is not used and that causes a gcc warning.  Fix it
(and I think this is a regression, I am pretty sure I fixed this once
before, sorry about that).

Issue reported by: Pritt Laes.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Pritt Laes <plaes@plaes.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:08 -05:00
Henrique de Moraes Holschuh
d1edb2b5f1 ACPI: thinkpad-acpi: add X61t HKEY events
Tomas Carnecky reports that events 0x5009 and 0x500a are swivel events, and
that 0x500b/0x500c are tablet pen storage bay events.

Document these events, and avoid nasty messages when they happen.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:08 -05:00
Henrique de Moraes Holschuh
a713b4d7bc ACPI: thinkpad-acpi: wakeup on hotunplug reporting
Handle some HKEY events that the firmware uses to report the reason for a
wake up, and to also notify that the system could go back to sleep (if it
woke up just to eject something from the bay, or to undock).

The driver will report the reason of the last wake up in the sysfs
attribute "wakeup_reason": 0 for "none, unknown, or standard ACPI wake up
event", 1 for "bay ejection request" and 2 for "undock request".

The firmware will also report if the operation that triggered the wake up
has been completed, by issuing an HKEY 0x3003 or 0x4003 event.  If the
operation fails, no event is sent.  When such a hotunplug sucessfull
notification is issued, the driver sets the attribute
"wakeup_hotunplug_complete" to 1.

While the firmware does tell us whether we are waking from a suspend or
hibernation scenario, the Linux way of hibernating makes this information
not reliable, and therefore it is not reported.

The idea is that if any of these attributes are non-zero, userspace might
want to do something at the end of the "wake up from sleep" procedures,
such as offering to send the machine back into sleep as soon as it is safe
to do so.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:08 -05:00
Henrique de Moraes Holschuh
3b64b51d20 ACPI: thinkpad-acpi: cleanup hotkey_notify and HKEY log messages
Use a generic message on hotkey_notify to log unknown and unhandled events,
and cleanup hotkey_notify a little.

Also, document event 0x5010 (brightness changed notification) and do not
log it as an unknown event (even if we do not use it for anything right
now).

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:08 -05:00
Henrique de Moraes Holschuh
083f17606f ACPI: thinkpad-acpi: add suspend handler
Add a handler for suspend events.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:07 -05:00
Henrique de Moraes Holschuh
35ff8b9fa9 ACPI: thinkpad-acpi: some checkpatch.pl fluff
Fix some of the crap reported by checkpatch.pl.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:07 -05:00
Henrique de Moraes Holschuh
e0c7dfe701 ACPI: thinkpad-acpi: rename IBM in defines
Rename defines with IBM in their name that are related to the older
driver name (ibm-acpi) to TPACPI, unless they are specific to IBM
ThinkPads.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:07 -05:00
Henrique de Moraes Holschuh
f68080f86d ACPI: thinkpad-acpi: module glue cleanups
General cleanup of module glue: Do some code reordering, and add
missing parameter help text.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:07 -05:00
Henrique de Moraes Holschuh
4b45cc076b ACPI: thinkpad-acpi: spring cleanup part 4
Remove dead code, and anything in the old changelog that is not a thank
you credit, or a key point to track down history.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:07 -05:00
Henrique de Moraes Holschuh
b21a15f6d0 ACPI: thinkpad-acpi: spring cleanup part 3
Reorder code in the file to get rid of more of the forward declarations,
and to make things cleaner and more organized.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:07 -05:00
Henrique de Moraes Holschuh
f74a27d4bd ACPI: thinkpad-acpi: spring cleanup part 2
Move most subdriver-related stuff imported from the header file closer to
their subdriver code.  Also, delete unneeded forward declarations.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 22:26:07 -05:00