Commit Graph

11 Commits

Author SHA1 Message Date
Sam Ravnborg
8b2f7ffffe x86: fix Section mismatch: reference to .init.text:lguest_entry
fix:

> WARNING: vmlinux.o(.data+0x4): Section mismatch: reference to .init.text:lguest_entry (between 'subarch_entries' and 'stack_start')

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:28 +01:00
Ian Campbell
5756dd59f1 x86_32: always run the full set of paging state.
I am preparing to convert the boot time page table to the kernels
native format.  To achieve that I need to enable PAE. Enabling PSE
and the no execute bit would not hurt.  So this patch modifies
the boot cpu path to execute all of the kernels enable code
if and only if we have the proper bits set in mmu_cr4_features.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:27 +01:00
Ian Campbell
503595010f x86_32: remove unnecessary use of %ebx as the boot cpu flag
Currently in head_32.S there are two ways we test to see if we
are the boot cpu.  By looking at %ebx and by looking at the
static variable ready.  When changing things around I have
found that it gets tricky to preserve %ebx.  So this
patch just switches head.S over to the more reliable
test of always using ready.

Hopefully later we can kill these tests entirely.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:27 +01:00
Ingo Molnar
94878efdd0 x86: early fault debugging improvement
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:09 +01:00
Rusty Russell
476c6c11a9 fix lguest rmmod "bad pgd"
After 17d57a9206 ("x86: fix x86-32 early
fixmap initialization.") removing lg.ko caused a printk from vunmap:

	mm/memory.c:115: bad pgd 004b3027.

On the second use after module load, the kernel crashes.

This fixes the immediate problem (accessed and dirty bits not set as
expected in pmd_none_or_clear_bad).  I can't see why this would cause
a crash, but I haven't been able to reproduce it once this is applied.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-01 11:30:35 -08:00
Eric W. Biederman
17d57a9206 x86: fix x86-32 early fixmap initialization.
pageexec@freemail.hu writes:

> i've just noticed that the chunk in i386/kernel/head.S ended up in a
> weird place, namely, it's not going to be executed as it's just after
> a 'jmp 3f' and before startup_32_smp, probably not what you intended.
> on a sidenote, the whole thing can be done in a single insn, like:
>
> movl $(swapper_pg_pmd - __PAGE_OFFSET + 0x067), (swapper_pg_dir -
> __PAGE_OFFSET+ 4092)

Thanks for the reminder I thought we had fixed this problem a while ago.

Needed to get fixed virtual address for USB debug and earlycon with mmio.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-03 17:17:10 +01:00
H. Peter Anvin
fa76dab935 x86: clean up setup.h and the boot code
Make <asm/setup.h> usable by the boot code.

Clean up vestiges of the old command-line protocol from setup.h and
head_32.S (it is still supported from the boot loader point of
view, since it is converted to the new command-line protocol by the
boot code.)

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23 22:37:25 +02:00
Rusty Russell
a24e785111 i386: paravirt boot sequence
This patch uses the updated boot protocol to do paravirtualized boot.
If the boot version is >= 2.07, then it will do two things:

 1. Check the bootparams loadflags to see if we should reload the
    segment registers and clear interrupts.  This is appropriate
    for normal native boot and some paravirtualized environments, but
    inapproprate for others.

 2. Check the hardware architecture, and dispatch to the appropriate
    kernel entrypoint.  If the bootloader doesn't set this, then we
    simply do the normal boot sequence.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:17 -07:00
Ingo Molnar
382f64ab8f i386: print better early fault info
improve early fault output.

old format:

 Int 14: CR2 010001e3  err 00000002  EIP c011f2f9  CS 00000060  flags 00010046
 Stack: c073695e c0791c10 00000000 ffffffff 00000000 01000000 00001000 c0791c10

new format:

 BUG: Int 14: CR2 010001e3
      EDI c1000000  ESI c0693c10  EBP c0637f9c  ESP c0637f08
      EBX 00000000  EDX 0000000e  ECX 00000000  EAX 010001e3
      err 00000002  EIP c0123119   CS 00000060  flg 00010046
 Stack: c064d589 c0693000 00000000 c0637f60 00c001e3 01000000 00038000 00000163
        00000000 00000163 00000000 ffffffff 00038000 00000000 00000000 00001000
        00001000 00000000 c0637f88 c06509be c0a2ae60 00001000 00001000 00000000

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17 20:16:56 +02:00
Ingo Molnar
1e3e19723e x86: prepare page allocator for high allocations on PAGEALLOC=y
To preserve the DMA pool in CONFIG_DEBUG_PAGEALLOC=y kernels, we'll
allocate pagetables from above the 16MB DMA limit, so we'll have to set
up boot pagetables to cover 16MB more RAM (worst-case).

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17 20:15:38 +02:00
Thomas Gleixner
9a163ed8e0 i386: move kernel
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:17:01 +02:00