Commit Graph

1054 Commits

Author SHA1 Message Date
Linus Torvalds
99f9f3d49c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx4: Make sure RQ allocation is always valid
  RDMA/cma: Fix initialization of next_port
  IB/mlx4: Fix zeroing of rnr_retry value in ib_modify_qp()
  mlx4_core: Don't set MTT address in dMPT entries with PA set
  mlx4_core: Check firmware command interface revision
  IB/mthca, mlx4_core: Fix typo in comment
  mlx4_core: Free catastrophic error MSI-X interrupt with correct dev_id
  mlx4_core: Initialize ctx_list and ctx_lock earlier
  mlx4_core: Fix CQ context layout
2007-06-11 15:46:08 -07:00
Roland Dreier
a4cd7ed86f IB/mlx4: Make sure RQ allocation is always valid
QPs attached to an SRQ must never have their own RQ, and QPs not
attached to SRQs must have an RQ with at least 1 entry.  Enforce all
of this in set_rq_size().

Based on a patch by Eli Cohen <eli@mellanox.co.il>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07 23:24:39 -07:00
Sean Hefty
bf2944bd56 RDMA/cma: Fix initialization of next_port
next_port should be between sysctl_local_port_range[0] and [1].
However, it is initially set to a random value with get_random_bytes().  
If the value is negative when treated as a signed integer, next_port
can end up outside the expected range because of the result of the % 
operator being negative.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07 23:24:38 -07:00
Jack Morgenstein
57f01b5339 IB/mlx4: Fix zeroing of rnr_retry value in ib_modify_qp()
The code in __mlx4_ib_modify_qp() overwrites context->params1 after
the RNR retry parameter is ORed in, which results in the RNR retry
parameter always being set to 0.  Fix this by moving where we OR in
the value to later in the function, after the initial assignment of
context->params1.

Found by the Mellanox firmware group.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07 23:24:38 -07:00
Herbert Xu
42f811b8bc [IPV4]: Convert IPv4 devconf to an array
This patch converts the ipv4_devconf config members (everything except
sysctl) to an array.  This allows easier manipulation which will be
needed later on to provide better management of default config values.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07 13:39:13 -07:00
Roland Dreier
3e1db334dc IB/mthca, mlx4_core: Fix typo in comment
s/signifant/significant/

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-07 11:51:59 -07:00
Sean Hefty
d998ccce02 IB/cm: Fix stale connection detection
The ib_cm can incorrectly detect a stale connection (a new connection
request for a QPN that is already connected) as a duplicate connection
request.  Separate the handling of potential duplicate REQs from stale
connections.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-29 16:07:09 -07:00
Michael S. Tsirkin
ec56dc0b7f IPoIB/cm: Fix performance regression on Mellanox
commit 518b1646 ("IPoIB/cm: Fix SRQ WR leak") introduced a severe
performance regression on Mellanox cards, because keeping a QP in the
error state for extended periods of time moves hardware to the slow
path (until the QP is destroyed).  For example, MPI latency goes from
~3 usecs to ~7 usecs.

Fix this by posting a send WR on one of the QPs that are being
flushed, instead of using a separate drain QP that is kept in the
error state.

This fixes bug <https://bugs.openfabrics.org/show_bug.cgi?id=636>,
reported and bisected by Scott Weitzenkamp at Cisco and debugged by
Sasha Mikheev at Voltaire.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-29 16:07:09 -07:00
Michael S. Tsirkin
8b7e15772a IB/mthca: Fix handling of send CQE with error for QPs connected to SRQ
mthca_free_err_wqe() currently treats both send and receive CQEs
identically if a QP is using an SRQ.  But for Tavor hardware, send
CQEs with error can be chained together even if the RQ is part of SRQ,
so we may miss some CQEs.

Fix by following the WQE chain for all send CQEs even for non-SRQ QPs.

This fixes crashes in IPoIB CM:
<https://bugs.openfabrics.org//show_bug.cgi?id=604>

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-29 16:07:09 -07:00
Michael S. Tsirkin
2dfbfc3712 IPoIB/cm: Drain cq in ipoib_cm_dev_stop()
Since NAPI polling is disabled while ipoib_cm_dev_stop() is running,
ipoib_cm_dev_stop() must poll the CQ itself in order to see the
packets draining.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-24 14:02:40 -07:00
Michael S. Tsirkin
8fd357a6e3 IPoIB/cm: Fix timeout check in ipoib_cm_dev_stop()
time_after() was used backwards, so the timeout occurred immediately.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-24 14:02:39 -07:00
Stefan Roscher
65a2c841d6 IB/ehca: Fix number of send WRs reported for new QP
Due to a typo, the driver was reporting the wrong number of "actual send
WRs" after ehca_create_qp().

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-24 14:02:39 -07:00
Eli Cohen
c0be5fb5f8 IB/mlx4: Initialize send queue entry ownership bits
We need to initialize the owner bit of send queue WQEs to hardware 
ownership whenever the QP is modified from reset to init, not just 
when the QP is first allocated.  This avoids having the hardware 
process stale WQEs when the QP is moved to reset but not destroyed and 
then modified to init again. 

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-24 14:02:38 -07:00
Roland Dreier
02d89b8708 IB/mlx4: Don't allocate RQ doorbell if using SRQ
If a QP is attached to a shared receive queue (SRQ), then it doesn't
have a receive queue (RQ).  So don't allocate an RQ doorbell (or map a
doorbell from userspace for userspace QPs) for that QP.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-23 15:16:08 -07:00
Linus Torvalds
8aee74c8ee Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/cm: Improve local id allocation
  IPoIB/cm: Fix SRQ WR leak
  IB/ipoib: Fix typos in error messages
  IB/mlx4: Check if SRQ is full when posting receive
  IB/mlx4: Pass send queue sizes from userspace to kernel
  IB/mlx4: Fix check of opcode in mlx4_ib_post_send()
  mlx4_core: Fix array overrun in dump_dev_cap_flags()
  IB/mlx4: Fix RESET to RESET and RESET to ERROR transitions
  IB/mthca: Fix RESET to ERROR transition
  IB/mlx4: Set GRH:HopLimit when sending globally routed MADs
  IB/mthca: Set GRH:HopLimit when building MLX headers
  IB/mlx4: Fix check of max_qp_dest_rdma in modify QP
  IB/mthca: Fix use-after-free on device restart
  IB/ehca: Return proper error code if register_mr fails
  IPoIB: Handle P_Key table reordering
  IB/core: Use start_port() and end_port()
  IB/core: Add helpers for uncached GID and P_Key searches
  IB/ipath: Fix potential deadlock with multicast spinlocks
  IB/core: Free umem when mm is already gone
2007-05-21 16:19:32 -07:00
Michael S. Tsirkin
9f81036c54 IB/cm: Improve local id allocation
The IB CM uses an idr for local id allocations, with a running counter
as start_id.  This fails to generate distinct ids if

1. An id is constantly created and destroyed
2. A chunk of ids just beyond the current next_id value is occupied

This in turn leads to an increased chance of connection request being
mis-detected as a duplicate, sometimes for several retries, until
next_id gets past the block of allocated ids. This has been observed
in practice.

As a fix, remember the last id allocated and start immediately above it.
This also fixes a problem with the old code, where next_id might
overflow and become negative.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-21 13:41:29 -07:00
Michael S. Tsirkin
518b1646f8 IPoIB/cm: Fix SRQ WR leak
SRQ WR leakage has been observed with IPoIB/CM: e.g. flipping ports on
and off will, with time, leak out all WRs and then all connections
will start getting RNR NAKs.  Fix this in the way suggested by spec:
move the QP being destroyed to the error state, wait for "Last WQE
Reached" event and then post WR on a "drain QP" connected to the same
CQ.  Once we observe a completion on the drain QP, it's safe to call
ib_destroy_qp.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-21 13:35:40 -07:00
Michael S. Tsirkin
24bd1e4e32 IB/ipoib: Fix typos in error messages
Trivial error message fixups.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-21 13:29:15 -07:00
Alexey Dobriyan
e8edc6e03a Detach sched.h from mm.h
First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
	alpha alpha-up
	arm
	i386 i386-up i386-defconfig i386-allnoconfig
	ia64 ia64-up
	m68k
	mips
	parisc parisc-up
	powerpc powerpc-up
	s390 s390-up
	sparc sparc-up
	sparc64 sparc64-up
	um-x86_64
	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21 09:18:19 -07:00
Roland Dreier
56a8c8b6ac IB/mlx4: Check if SRQ is full when posting receive
Make mlx4_post_srq_recv() fail if the SRQ is full (head == tail).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-20 20:19:24 -07:00
Eli Cohen
2446304dd6 IB/mlx4: Pass send queue sizes from userspace to kernel
Pass the number of WQEs for the send queue and their size from userspace
to the kernel to avoid having to keep the QP size calculations in sync 
between the kernel driver and libmlx4.  This fixes a bug seen with the 
current mlx4_ib driver and current libmlx4 caused by a difference in the 
calculated sizes for SQ WQEs.  Also, this gives more flexibility for 
userspace to experiment with using multiple WQE BBs for a single SQ WQE.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-20 10:18:04 -07:00
Roland Dreier
59b0ed1212 IB/mlx4: Fix check of opcode in mlx4_ib_post_send()
wr->opcode is invalid if it's >= ARRAY_SIZE(mlx4_ib_opcode), not just
strictly >.

This was spotted by the Coverity checker (CID 1643).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:58 -07:00
Michael S. Tsirkin
65adfa911a IB/mlx4: Fix RESET to RESET and RESET to ERROR transitions
According to the IB spec, a QP can be moved from RESET back to RESET
or to the ERROR state, but mlx4 firmware does not support this and
returns an error if we try.  Fix the RESET to RESET transition by
just returning 0 without doing anything, and fix RESET to ERROR by
moving the QP from RESET to INIT with dummy parameters and then
transitioning from INIT to ERROR.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:57 -07:00
Michael S. Tsirkin
b18aad7150 IB/mthca: Fix RESET to ERROR transition
According to the IB spec, a QP can be moved from RESET to the ERROR 
state, but mthca firmware does not support this and returns an error if 
we try.  Work around this FW limitation by moving the QP from RESET to
INIT with dummy parameters and then transitioning from INIT to ERROR.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:57 -07:00
Roland Dreier
1526130351 IB/mlx4: Set GRH:HopLimit when sending globally routed MADs
This is the same issue discovered in mthca by Rolf Manderscheid
<rvm@obsidianresearch.com>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:57 -07:00
Rolf Manderscheid
3f37cae694 IB/mthca: Set GRH:HopLimit when building MLX headers
Global CM packets used by rmda_cm were being sent with a GRH:hopLimit
of zero, causing them to be dropped by the router.  The problem is a
missing initialization of the hop_limit field in mthca_read_ah(),
which was called by build_mlx_header() when sending a MAD on QP1.

Signed-off-by: Rolf Manderscheid <rvm@obsidianresearch.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:56 -07:00
Eli Cohen
1f8f7b7a7b IB/mlx4: Fix check of max_qp_dest_rdma in modify QP
max_qp_dest_rdma is already in natural units - no need to shift.  This
was discovered by a test that deliberately requests more outstanding
atomic operation than the device supports.

Found by Sagi Rotem at Mellanox.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:56 -07:00
Ali Ayoub
de57c9f102 IB/mthca: Fix use-after-free on device restart
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:56 -07:00
Hoang-Nam Nguyen
bd5a6ccc0e IB/ehca: Return proper error code if register_mr fails
Set the return code of ehca_register_mr() to ENOMEM if the corresponding
firmware call fails due to out of resources.  Some other error codes
were explicitly mapped to EINVAL -- just remove those cases so they
get mapped to the default case, which already returns EINVAL anyway.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:54 -07:00
Yosef Etigin
26bbf13ce1 IPoIB: Handle P_Key table reordering
SM reconfiguration or failover possibly causes a shuffling of the values
in the P_Key table. Right now, IPoIB only queries for the P_Key index
once when it creates the device QP, and hence there are problems if the
index of a P_Key value changes.  Fix this by using the PKEY_CHANGE event
to trigger a recheck of the P_Key index.

Signed-off-by: Yosef Etigin <yosefe@voltaire.com>
Acked-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:54 -07:00
Roland Dreier
1af4c435f3 IB/core: Use start_port() and end_port()
Clean up ib_query_port() and ib_modify_port() slightly by using the 
just-added start_port() and end_port() helpers.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:54 -07:00
Yosef Etigin
5eb620c81c IB/core: Add helpers for uncached GID and P_Key searches
Add ib_find_gid() and ib_find_pkey() functions that use uncached device
queries.  The calls might block but the returns are always up-to-date.
Cache P_Key and GID table lengths in core to avoid extra port info queries.

Signed-off-by: Yosef Etigin <yosefe@voltaire.com>
Acked-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:53 -07:00
Roland Dreier
8b8c8bca3a IB/ipath: Fix potential deadlock with multicast spinlocks
Lockdep found the following potential deadlock between mcast_lock and
n_mcast_grps_lock: mcast_lock is taken from both interrupt context and
process context, so spin_lock_irqsave() must be used to take it.
n_mcast_grps_lock is only taken from process context, so at first it
seems safe to take it with plain spin_lock(); however, it also nests
inside mcast_lock, and hence we could deadlock:

  cpu A                                   cpu B
    ipath_mcast_add():
      spin_lock_irq(&mcast_lock);

                                            ipath_mcast_detach():
                                              spin_lock(&n_mcast_grps_lock);

                                            <enter interrupt>

                                            ipath_mcast_find():
                                              spin_lock_irqsave(&mcast_lock);

      spin_lock(&n_mcast_grps_lock);

Fix this by using spin_lock_irq() to take n_mcast_grps_lock.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:53 -07:00
Eli Cohen
7b82cd8ee7 IB/core: Free umem when mm is already gone
Free umem when task's mm is already destroyed by the time
ib_umem_release gets called.

Found by Dotan Barak at Mellanox.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19 08:51:53 -07:00
Linus Torvalds
de7860c3f3 Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB/cm: Optimize stale connection detection
  IB/mthca: Set cleaned CQEs back to HW ownership when cleaning CQ
  IB/mthca: Fix posting >255 recv WRs for Tavor
  RDMA/cma: Add check to validate that cm_id is bound to a device
  RDMA/cma: Fix synchronization with device removal in cma_iw_handler
  RDMA/cma: Simplify device removal handling code
  IB/ehca: Disable scaling code by default, bump version number
  IB/ehca: Beautify sysfs attribute code and fix compiler warnings
  IB/ehca: Remove _irqsave, move #ifdef
  IB/ehca: Fix AQP0/1 QP number
  IB/ehca: Correctly set GRH mask bit in ehca_modify_qp()
  IB/ehca: Serialize hypervisor calls in ehca_register_mr()
  IB/ipath: Shadow the gpio_mask register
  IB/mlx4: Fix uninitialized spinlock for 32-bit archs
  mlx4_core: Remove unused doorbell_lock
  net: Trivial MLX4_DEBUG dependency fix.
2007-05-15 09:52:31 -07:00
Michael S. Tsirkin
7c5b9ef857 IPoIB/cm: Optimize stale connection detection
In the presence of some running RX connections, we repeat
queue_delayed_work calls each 4 RX WRs, which is a waste.  It's enough
to start stale task when a first passive connection is added, and
rerun it every IPOIB_CM_RX_DELAY as long as there are outstanding
passive connections.

This removes some code from RX data path.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 14:11:01 -07:00
Michael S. Tsirkin
bd18c11277 IB/mthca: Set cleaned CQEs back to HW ownership when cleaning CQ
mthca_cq_clean() updates the CQ consumer index without moving CQEs
back to HW ownership.  As a result, the same WRID might get reported
twice, resulting in a use-after-free.  This was observed in IPoIB CM.
Fix by moving all freed CQEs to HW ownership.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=617>

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 14:10:34 -07:00
Michael S. Tsirkin
3e28c56b9b IB/mthca: Fix posting >255 recv WRs for Tavor
Fix posting lists of > 255 receive WRs for Tavor: rq.next_ind must
be updated each doorbell, otherwise the next doorbell will use an
incorrect index.

Found by Ronni Zimmermann at Mellanox.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 14:10:34 -07:00
Sean Hefty
6c719f5c6c RDMA/cma: Add check to validate that cm_id is bound to a device
Several checks in the rdma_cm check against the state of the
cm_id, but only to validate that the cm_id is bound to an underlying
transport specific CM and an RDMA device.  Make the check explicit
in what we're trying to check for, since we're not synchronizing
against the cm_id state.

This will allow a user to disconnect a cm_id or reject a connection
after receiving a device removal event.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 14:10:32 -07:00
Sean Hefty
be65f086f2 RDMA/cma: Fix synchronization with device removal in cma_iw_handler
The cma_iw_handler needs to validate the state of the rdma_cm_id before
processing a new connection request to ensure that a device removal is
not already being processed for the same rdma_cm_id.  Without the state
check, the user can receive simultaneous callbacks for the same cm_id, or
a callback after they've destroyed the cm_id.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 13:56:32 -07:00
Sean Hefty
8aa08602bd RDMA/cma: Simplify device removal handling code
Add a new routine and rename another to encapsulate common code for
synchronizing with device removal.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 13:54:49 -07:00
Joachim Fenkes
4e430dcb7b IB/ehca: Disable scaling code by default, bump version number
- Scaling code is still considered experimental, so disable it by default
- Increase version to SVNEHCA_0023

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 13:41:40 -07:00
Joachim Fenkes
bba9b6013e IB/ehca: Beautify sysfs attribute code and fix compiler warnings
eHCA's sysfs attributes are now being created via sysfs_create_group(),
making the process neatly table-driven. The return value is checked, thus
fixing a few compiler warnings.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 13:40:45 -07:00
Joachim Fenkes
c7a14939e7 IB/ehca: Remove _irqsave, move #ifdef
- In ehca_process_eq(), we're IRQ safe throughout the whole function, so we
  don't need another _irqsave in the middle of flight.

- take_over_work() is only called by comp_pool_callback(), so it can move
  into the same #ifdef block.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 13:40:05 -07:00
Hoang-Nam Nguyen
c55a0ddd8e IB/ehca: Fix AQP0/1 QP number
AQP0/1 should report qp_num={0|1} and the actual QP# should be stored
in struct ehca_qp, not the other way round.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 13:39:31 -07:00
Joachim Fenkes
92761cdaf2 IB/ehca: Correctly set GRH mask bit in ehca_modify_qp()
The driver needs to always supply the "GRH present" flag to the
hypervisor, whether it's true or false. Not supplying it (i.e. not
setting the corresponding mask bit) amounts to a "perhaps", which we
don't want.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 13:38:57 -07:00
Stefan Roscher
5d88278e3b IB/ehca: Serialize hypervisor calls in ehca_register_mr()
Some pSeries hypervisor versions show a race condition in the allocate
MR hCall.  Serialize this call per adapter to circumvent this problem.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 13:38:11 -07:00
Arthur Jones
8f140b407f IB/ipath: Shadow the gpio_mask register
Once upon a time, GPIO interrupts were rare.  But then a chip bug in
the waldo series forced the use of a GPIO interrupt to signal packet
reception.  This greatly increased the frequency of GPIO interrupts
which have the gpio_mask bits set on the waldo chips.  Other bits in
the gpio_status register are used for I2C clock and data lines, these
bits are usually on.  An "unlikely" annotation leftover from the old
days was improperly applied to these bits, and an unnecessary chip
mmio read was being accessed in the interrupt fast path on waldo.

Remove the stagnant unlikely annotation in the interrupt handler and
keep a shadow copy of the gpio_mask register to avoid the slow mmio
read when testing for interruptable GPIO bits.

Signed-off-by: Arthur Jones <arthur.jones@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 13:22:42 -07:00
Jack Morgenstein
26c6bc7b81 IB/mlx4: Fix uninitialized spinlock for 32-bit archs
uar_lock spinlock was used in mlx4_ib_cq_arm without being initialized
(this only affects 32-bit archs, because uar_lock is not used on
64-bit archs and MLX4_INIT_DOORBELL_LOCK() is a NOP).

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14 13:02:58 -07:00
Martin Schwidefsky
e25df1205f [S390] Kconfig: menus with depends on HAS_IOMEM.
Add "depends on HAS_IOMEM" to a number of menus to make them
disappear for s390 which does not have I/O memory.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10 15:46:07 +02:00