Commit Graph

2182 Commits

Author SHA1 Message Date
Andy Adamson
66b0686049 NFSv4: test SECINFO RPC_AUTH_GSS pseudoflavors for support
Fix nfs4_negotiate_security to create an rpc_clnt used to test each SECINFO
returned pseudoflavor. Check credential creation  (and gss_context creation)
which is important for RPC_AUTH_GSS pseudoflavors which can fail for multiple
reasons including mis-configuration.

Don't call nfs4_negotiate in nfs4_submount as it was just called by
nfs4_proc_lookup_mountpoint (nfs4_proc_lookup_common)

Signed-off-by: Andy Adamson <andros@netapp.com>
[Trond: fix corrupt return value from nfs_find_best_sec()]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-06-24 18:46:58 -04:00
Linus Torvalds
f9da455b93 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.

 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
    Benniston.

 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
    Mork.

 4) BPF now has a "random" opcode, from Chema Gonzalez.

 5) Add more BPF documentation and improve test framework, from Daniel
    Borkmann.

 6) Support TCP fastopen over ipv6, from Daniel Lee.

 7) Add software TSO helper functions and use them to support software
    TSO in mvneta and mv643xx_eth drivers.  From Ezequiel Garcia.

 8) Support software TSO in fec driver too, from Nimrod Andy.

 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.

10) Handle broadcasts more gracefully over macvlan when there are large
    numbers of interfaces configured, from Herbert Xu.

11) Allow more control over fwmark used for non-socket based responses,
    from Lorenzo Colitti.

12) Do TCP congestion window limiting based upon measurements, from Neal
    Cardwell.

13) Support busy polling in SCTP, from Neal Horman.

14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.

15) Bridge promisc mode handling improvements from Vlad Yasevich.

16) Don't use inetpeer entries to implement ID generation any more, it
    performs poorly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
  tcp: fixing TLP's FIN recovery
  net: fec: Add software TSO support
  net: fec: Add Scatter/gather support
  net: fec: Increase buffer descriptor entry number
  net: fec: Factorize feature setting
  net: fec: Enable IP header hardware checksum
  net: fec: Factorize the .xmit transmit function
  bridge: fix compile error when compiling without IPv6 support
  bridge: fix smatch warning / potential null pointer dereference
  via-rhine: fix full-duplex with autoneg disable
  bnx2x: Enlarge the dorq threshold for VFs
  bnx2x: Check for UNDI in uncommon branch
  bnx2x: Fix 1G-baseT link
  bnx2x: Fix link for KR with swapped polarity lane
  sctp: Fix sk_ack_backlog wrap-around problem
  net/core: Add VF link state control policy
  net/fsl: xgmac_mdio is dependent on OF_MDIO
  net/fsl: Make xgmac_mdio read error message useful
  net_sched: drr: warn when qdisc is not work conserving
  ...
2014-06-12 14:27:40 -07:00
Tom Herbert
7e3cead517 net: Save software checksum complete
In skb_checksum complete, if we need to compute the checksum for the
packet (via skb_checksum) save the result as CHECKSUM_COMPLETE.
Subsequent checksum verification can use this.

Also, added csum_complete_sw flag to distinguish between software and
hardware generated checksum complete, we should always be able to trust
the software computation.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11 15:46:13 -07:00
Linus Torvalds
d1e1cda862 NFS client updates for Linux 3.16
Highlights include:
 
 - Massive cleanup of the NFS read/write code by Anna and Dros
 - Support multiple NFS read/write requests per page in order to deal with
   non-page aligned pNFS striping. Also cleans up the r/wsize < page size
   code nicely.
 - stable fix for ensuring inode is declared uptodate only after all the
   attributes have been checked.
 - stable fix for a kernel Oops when remounting
 - NFS over RDMA client fixes
 - move the pNFS files layout driver into its own subdirectory
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTl3pmAAoJEGcL54qWCgDyraIP/08ZbbDowVTP9572bxl+VR2i
 zNbrflBtl1R05D4Imi/IEySK0w6xj1CLsncNpXAT2bxTlyKPW70tpiiPlRKMPuO8
 JW+iPiepR2t0mol6MEd46yuV8btXVk8I+7IYjPXANiMJG8O5dJzNQ8NiCQOERBNt
 FQ7rzTCFO0ESGXnT6vYrT4I0bwqYVklBiJRTT4PQVzhhhDq9qUdq21BlQjQJFXP4
 9aBLurxKptlHBvE6A2Quja6ObEC0s31CxcijqHIJ+Ue4GbKcFbMG1tgjY7ESE/AD
 rqzDeF0jvWHT+frmvFEUUXWqzF1ReZ4x9pfDoOgeG6T9/K6DT91O0yMOgG8jvlbF
 8DSATNYGDX5sSjpvaG5JokGG+cGCk9srVDx+itn7HlwzalRwn0PjKtIYwOJ7TJIr
 o/j20nOsPrRGF0OqLf9phyocgRrlbMKOzj1IXldHHfAbNkRcISTK08lxvsz96Ddn
 zRyDmbsbY6QFXdB3AVSeQmg5R0OOLtzNIcsFPmNdvy5eiy67qU0lsGg8UGNnoz8k
 PHN1pcGejkctLhQ32ee3w/W6zkrgpJZcNC9JSoG8Dc3SeXus0c3IgumRknFCmiep
 ssN+1jEITAGeS5a2aBxwLQLVI2JAr2lxs5e+R4D5EsQlFkCl6Mrgtzh/aToWTuFl
 Qt7l2zI3r3VieKT9u7Bh
 =OyXR
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

   - massive cleanup of the NFS read/write code by Anna and Dros
   - support multiple NFS read/write requests per page in order to deal
     with non-page aligned pNFS striping.  Also cleans up the r/wsize <
     page size code nicely.
   - stable fix for ensuring inode is declared uptodate only after all
     the attributes have been checked.
   - stable fix for a kernel Oops when remounting
   - NFS over RDMA client fixes
   - move the pNFS files layout driver into its own subdirectory"

* tag 'nfs-for-3.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
  NFS: populate ->net in mount data when remounting
  pnfs: fix lockup caused by pnfs_generic_pg_test
  NFSv4.1: Fix typo in dprintk
  NFSv4.1: Comment is now wrong and redundant to code
  NFS: Use raw_write_seqcount_begin/end int nfs4_reclaim_open_state
  xprtrdma: Disconnect on registration failure
  xprtrdma: Remove BUG_ON() call sites
  xprtrdma: Avoid deadlock when credit window is reset
  SUNRPC: Move congestion window constants to header file
  xprtrdma: Reset connection timeout after successful reconnect
  xprtrdma: Use macros for reconnection timeout constants
  xprtrdma: Allocate missing pagelist
  xprtrdma: Remove Tavor MTU setting
  xprtrdma: Ensure ia->ri_id->qp is not NULL when reconnecting
  xprtrdma: Reduce the number of hardway buffer allocations
  xprtrdma: Limit work done by completion handler
  xprtrmda: Reduce calls to ib_poll_cq() in completion handlers
  xprtrmda: Reduce lock contention in completion handlers
  xprtrdma: Split the completion queue
  xprtrdma: Make rpcrdma_ep_destroy() return void
  ...
2014-06-10 15:02:42 -07:00
Linus Torvalds
5b174fd647 Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
 "The largest piece is a long-overdue rewrite of the xdr code to remove
  some annoying limitations: for example, there was no way to return
  ACLs larger than 4K, and readdir results were returned only in 4k
  chunks, limiting performance on large directories.

  Also:
        - part of Neil Brown's work to make NFS work reliably over the
          loopback interface (so client and server can run on the same
          machine without deadlocks).  The rest of it is coming through
          other trees.
        - cleanup and bugfixes for some of the server RDMA code, from
          Steve Wise.
        - Various cleanup of NFSv4 state code in preparation for an
          overhaul of the locking, from Jeff, Trond, and Benny.
        - smaller bugfixes and cleanup from Christoph Hellwig and
          Kinglong Mee.

  Thanks to everyone!

  This summer looks likely to be busier than usual for knfsd.  Hopefully
  we won't break it too badly; testing definitely welcomed"

* 'for-3.16' of git://linux-nfs.org/~bfields/linux: (100 commits)
  nfsd4: fix FREE_STATEID lockowner leak
  svcrdma: Fence LOCAL_INV work requests
  svcrdma: refactor marshalling logic
  nfsd: don't halt scanning the DRC LRU list when there's an RC_INPROG entry
  nfs4: remove unused CHANGE_SECURITY_LABEL
  nfsd4: kill READ64
  nfsd4: kill READ32
  nfsd4: simplify server xdr->next_page use
  nfsd4: hash deleg stateid only on successful nfs4_set_delegation
  nfsd4: rename recall_lock to state_lock
  nfsd: remove unneeded zeroing of fields in nfsd4_proc_compound
  nfsd: fix setting of NFS4_OO_CONFIRMED in nfsd4_open
  nfsd4: use recall_lock for delegation hashing
  nfsd: fix laundromat next-run-time calculation
  nfsd: make nfsd4_encode_fattr static
  SUNRPC/NFSD: Remove using of dprintk with KERN_WARNING
  nfsd: remove unused function nfsd_read_file
  nfsd: getattr for FATTR4_WORD0_FILES_AVAIL needs the statfs buffer
  NFSD: Error out when getting more than one fsloc/secinfo/uuid
  NFSD: Using type of uint32_t for ex_nflavors instead of int
  ...
2014-06-10 11:50:57 -07:00
Steve Wise
83710fc753 svcrdma: Fence LOCAL_INV work requests
Fencing forces the invalidate to only happen after all prior send
work requests have been completed.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reported by : Devesh Sharma <Devesh.Sharma@Emulex.Com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-06-06 19:22:51 -04:00
Steve Wise
0bf4828983 svcrdma: refactor marshalling logic
This patch refactors the NFSRDMA server marshalling logic to
remove the intermediary map structures.  It also fixes an existing bug
where the NFSRDMA server was not minding the device fast register page
list length limitations.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
2014-06-06 19:22:50 -04:00
J. Bruce Fields
05638dc73a nfsd4: simplify server xdr->next_page use
The rpc code makes available to the NFS server an array of pages to
encod into.  The server represents its reply as an xdr buf, with the
head pointing into the first page in that array, the pages ** array
starting just after that, and the tail (if any) sharing any leftover
space in the page used by the head.

While encoding, we use xdr_stream->page_ptr to keep track of which page
we're currently using.

Currently we set xdr_stream->page_ptr to buf->pages, which makes the
head a weird exception to the rule that page_ptr always points to the
page we're currently encoding into.  So, instead set it to buf->pages -
1 (the page actually containing the head), and remove the need for a
little unintuitive logic in xdr_get_next_encode_buffer() and
xdr_truncate_encode.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-06-06 19:22:46 -04:00
Chuck Lever
c93c62231c xprtrdma: Disconnect on registration failure
If rpcrdma_register_external() fails during request marshaling, the
current RPC request is killed. Instead, this RPC should be retried
after reconnecting the transport instance.

The most likely reason for registration failure with FRMR is a
failed post_send, which would be due to a remote transport
disconnect or memory exhaustion. These issues can be recovered
by a retry.

Problems encountered in the marshaling logic itself will not be
corrected by trying again, so these should still kill a request.

Now that we've added a clean exit for marshaling errors, take the
opportunity to defang some BUG_ON's.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:53 -04:00
Chuck Lever
c977dea227 xprtrdma: Remove BUG_ON() call sites
If an error occurs in the marshaling logic, fail the RPC request
being processed, but leave the client running.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:53 -04:00
Chuck Lever
e7ce710a88 xprtrdma: Avoid deadlock when credit window is reset
Update the cwnd while processing the server's reply.  Otherwise the
next task on the xprt_sending queue is still subject to the old
credit window. Currently, no task is awoken if the old congestion
window is still exceeded, even if the new window is larger, and a
deadlock results.

This is an issue during a transport reconnect. Servers don't
normally shrink the credit window, but the client does reset it to
1 when reconnecting so the server can safely grow it again.

As a minor optimization, remove the hack of grabbing the initial
cwnd size (which happens to be RPC_CWNDSCALE) and using that value
as the congestion scaling factor. The scaling value is invariant,
and we are better off without the multiplication operation.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:52 -04:00
Chuck Lever
4f4cf5ad6f SUNRPC: Move congestion window constants to header file
I would like to use one of the RPC client's congestion algorithm
constants in transport-specific code.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:51 -04:00
Chuck Lever
18906972aa xprtrdma: Reset connection timeout after successful reconnect
If the new connection is able to make forward progress, reset the
re-establish timeout. Otherwise it keeps growing even if disconnect
events are rare.

The same behavior as TCP is adopted: reconnect immediately if the
transport instance has been able to make some forward progress.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:51 -04:00
Chuck Lever
bfaee096de xprtrdma: Use macros for reconnection timeout constants
Clean up: Ensure the same max and min constant values are used
everywhere when setting reconnect timeouts.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:50 -04:00
Shirley Ma
196c69989d xprtrdma: Allocate missing pagelist
GETACL relies on transport layer to alloc memory for reply buffer.
However xprtrdma assumes that the reply buffer (pagelist) has been
pre-allocated in upper layer. This problem was reported by IOL OFA lab
test on PPC.

Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Edward Mossman <emossman@iol.unh.edu>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:49 -04:00
Chuck Lever
5bc4bc7292 xprtrdma: Remove Tavor MTU setting
Clean up.  Remove HCA-specific clutter in xprtrdma, which is
supposed to be device-independent.

Hal Rosenstock <hal@dev.mellanox.co.il> observes:
> Note that there is OpenSM option (enable_quirks) to return 1K MTU
> in SA PathRecord responses for Tavor so that can be used for this.
> The default setting for enable_quirks is FALSE so that would need
> changing.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:48 -04:00
Chuck Lever
ec62f40d35 xprtrdma: Ensure ia->ri_id->qp is not NULL when reconnecting
Devesh Sharma <Devesh.Sharma@Emulex.Com> reports that after a
disconnect, his HCA is failing to create a fresh QP, leaving
ia_ri->ri_id->qp set to NULL. But xprtrdma still allows RPCs to
wake up and post LOCAL_INV as they exit, causing an oops.

rpcrdma_ep_connect() is allowing the wake-up by leaking the QP
creation error code (-EPERM in this case) to the RPC client's
generic layer. xprt_connect_status() does not recognize -EPERM, so
it kills pending RPC tasks immediately rather than retrying the
connect.

Re-arrange the QP creation logic so that when it fails on reconnect,
it leaves ->qp with the old QP rather than NULL.  If pending RPC
tasks wake and exit, LOCAL_INV work requests will flush rather than
oops.

On initial connect, leaving ->qp == NULL is OK, since there are no
pending RPCs that might use ->qp. But be sure not to try to destroy
a NULL QP when rpcrdma_ep_connect() is retried.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:47 -04:00
Chuck Lever
65866f8259 xprtrdma: Reduce the number of hardway buffer allocations
While marshaling an RPC/RDMA request, the inline_{rsize,wsize}
settings determine whether an inline request is used, or whether
read or write chunks lists are built. The current default value of
these settings is 1024. Any RPC request smaller than 1024 bytes is
sent to the NFS server completely inline.

rpcrdma_buffer_create() allocates and pre-registers a set of RPC
buffers for each transport instance, also based on the inline rsize
and wsize settings.

RPC/RDMA requests and replies are built in these buffers. However,
if an RPC/RDMA request is expected to be larger than 1024, a buffer
has to be allocated and registered for that RPC, and deregistered
and released when the RPC is complete. This is known has a
"hardway allocation."

Since the introduction of NFSv4, the size of RPC requests has become
larger, and hardway allocations are thus more frequent. Hardway
allocations are significant overhead, and they waste the existing
RPC buffers pre-allocated by rpcrdma_buffer_create().

We'd like fewer hardway allocations.

Increasing the size of the pre-registered buffers is the most direct
way to do this. However, a blanket increase of the inline thresholds
has interoperability consequences.

On my 64-bit system, rpcrdma_buffer_create() requests roughly 7000
bytes for each RPC request buffer, using kmalloc(). Due to internal
fragmentation, this wastes nearly 1200 bytes because kmalloc()
already returns an 8192-byte piece of memory for a 7000-byte
allocation request, though the extra space remains unused.

So let's round up the size of the pre-allocated buffers, and make
use of the unused space in the kmalloc'd memory.

This change reduces the amount of hardway allocated memory for an
NFSv4 general connectathon run from 1322092 to 9472 bytes (99%).

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:46 -04:00
Chuck Lever
8301a2c047 xprtrdma: Limit work done by completion handler
Sagi Grimberg <sagig@dev.mellanox.co.il> points out that a steady
stream of CQ events could starve other work because of the boundless
loop pooling in rpcrdma_{send,recv}_poll().

Instead of a (potentially infinite) while loop, return after
collecting a budgeted number of completions.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:45 -04:00
Chuck Lever
1c00dd0776 xprtrmda: Reduce calls to ib_poll_cq() in completion handlers
Change the completion handlers to grab up to 16 items per
ib_poll_cq() call. No extra ib_poll_cq() is needed if fewer than 16
items are returned.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:44 -04:00
Chuck Lever
7f23f6f6e3 xprtrmda: Reduce lock contention in completion handlers
Skip the ib_poll_cq() after re-arming, if the provider knows there
are no additional items waiting. (Have a look at commit ed23a727 for
more details).

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:43 -04:00
Chuck Lever
fc66448549 xprtrdma: Split the completion queue
The current CQ handler uses the ib_wc.opcode field to distinguish
between event types. However, the contents of that field are not
reliable if the completion status is not IB_WC_SUCCESS.

When an error completion occurs on a send event, the CQ handler
schedules a tasklet with something that is not a struct rpcrdma_rep.
This is never correct behavior, and sometimes it results in a panic.

To resolve this issue, split the completion queue into a send CQ and
a receive CQ. The send CQ handler now handles only struct rpcrdma_mw
wr_id's, and the receive CQ handler now handles only struct
rpcrdma_rep wr_id's.

Fix suggested by Shirley Ma <shirley.ma@oracle.com>

Reported-by: Rafael Reiter <rafael.reiter@ims.co.at>
Fixes: 5c635e09ce
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=73211
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Klemens Senn <klemens.senn@ims.co.at>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:42 -04:00
Chuck Lever
7f1d54191e xprtrdma: Make rpcrdma_ep_destroy() return void
Clean up: rpcrdma_ep_destroy() returns a value that is used
only to print a debugging message. rpcrdma_ep_destroy() already
prints debugging messages in all error cases.

Make rpcrdma_ep_destroy() return void instead.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:41 -04:00
Chuck Lever
13c9ff8f67 xprtrdma: Simplify rpcrdma_deregister_external() synopsis
Clean up: All remaining callers of rpcrdma_deregister_external()
pass NULL as the last argument, so remove that argument.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:40 -04:00
Chuck Lever
cdd9ade711 xprtrdma: mount reports "Invalid mount option" if memreg mode not supported
If the selected memory registration mode is not supported by the
underlying provider/HCA, the NFS mount command reports that there was
an invalid mount option, and fails. This is misleading.

Reporting a problem allocating memory is a lot closer to the truth.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:39 -04:00
Chuck Lever
f10eafd3a6 xprtrdma: Fall back to MTHCAFMR when FRMR is not supported
An audit of in-kernel RDMA providers that do not support the FRMR
memory registration shows that several of them support MTHCAFMR.
Prefer MTHCAFMR when FRMR is not supported.

If MTHCAFMR is not supported, only then choose ALLPHYSICAL.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:39 -04:00
Chuck Lever
0ac531c183 xprtrdma: Remove REGISTER memory registration mode
All kernel RDMA providers except amso1100 support either MTHCAFMR
or FRMR, both of which are faster than REGISTER.  amso1100 can
continue to use ALLPHYSICAL.

The only other ULP consumer in the kernel that uses the reg_phys_mr
verb is Lustre.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:38 -04:00
Chuck Lever
b45ccfd25d xprtrdma: Remove MEMWINDOWS registration modes
The MEMWINDOWS and MEMWINDOWS_ASYNC memory registration modes were
intended as stop-gap modes before the introduction of FRMR. They
are now considered obsolete.

MEMWINDOWS_ASYNC is also considered unsafe because it can leave
client memory registered and exposed for an indeterminant time after
each I/O.

At this point, the MEMWINDOWS modes add needless complexity, so
remove them.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:37 -04:00
Chuck Lever
03ff8821eb xprtrdma: Remove BOUNCEBUFFERS memory registration mode
Clean up: This memory registration mode is slow and was never
meant for use in production environments. Remove it to reduce
implementation complexity.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:37 -04:00
Chuck Lever
254f91e2fa xprtrdma: RPC/RDMA must invoke xprt_wake_pending_tasks() in process context
An IB provider can invoke rpcrdma_conn_func() in an IRQ context,
thus rpcrdma_conn_func() cannot be allowed to directly invoke
generic RPC functions like xprt_wake_pending_tasks().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:36 -04:00
Allen Andrews
4034ba0423 nfs-rdma: Fix for FMR leaks
Two memory region leaks were found during testing:

1. rpcrdma_buffer_create: While allocating RPCRDMA_FRMR's
ib_alloc_fast_reg_mr is called and then ib_alloc_fast_reg_page_list is
called.  If ib_alloc_fast_reg_page_list returns an error it bails out of
the routine dropping the last ib_alloc_fast_reg_mr frmr region creating a
memory leak.  Added code to dereg the last frmr if
ib_alloc_fast_reg_page_list fails.

2. rpcrdma_buffer_destroy: While cleaning up, the routine will only free
the MR's on the rb_mws list if there are rb_send_bufs present.  However, in
rpcrdma_buffer_create while the rb_mws list is being built if one of the MR
allocation requests fail after some MR's have been allocated on the rb_mws
list the routine never gets to create any rb_send_bufs but instead jumps to
the rpcrdma_buffer_destroy routine which will never free the MR's on rb_mws
list because the rb_send_bufs were never created.   This leaks all the MR's
on the rb_mws list that were created prior to one of the MR allocations
failing.

Issue(2) was seen during testing. Our adapter had a finite number of MR's
available and we created enough connections to where we saw an MR
allocation failure on our Nth NFS connection request. After the kernel
cleaned up the resources it had allocated for the Nth connection we noticed
that FMR's had been leaked due to the coding error described above.

Issue(1) was seen during a code review while debugging issue(2).

Signed-off-by: Allen Andrews <allen.andrews@emulex.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:35 -04:00
Steve Wise
0fc6c4e7bb xprtrdma: mind the device's max fast register page list depth
Some rdma devices don't support a fast register page list depth of
at least RPCRDMA_MAX_DATA_SEGS.  So xprtrdma needs to chunk its fast
register regions according to the minimum of the device max supported
depth or RPCRDMA_MAX_DATA_SEGS.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-06-04 08:56:33 -04:00
Kinglong Mee
a48fd0f9f7 SUNRPC/NFSD: Remove using of dprintk with KERN_WARNING
When debugging, rpc prints messages from dprintk(KERN_WARNING ...)
with "^A4" prefixed,

[ 2780.339988] ^A4nfsd: connect from unprivileged port: 127.0.0.1, port=35316

Trond tells,
> dprintk != printk. We have NEVER supported dprintk(KERN_WARNING...)

This patch removes using of dprintk with KERN_WARNING.

Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-30 20:25:28 -04:00
J. Bruce Fields
a5cddc885b nfsd4: better reservation of head space for krb5
RPC_MAX_AUTH_SIZE is scattered around several places.  Better to set it
once in the auth code, where this kind of estimate should be made.  And
while we're at it we can leave it zero when we're not using krb5i or
krb5p.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-30 17:32:17 -04:00
J. Bruce Fields
db3f58a95b rpc: define xdr_restrict_buflen
With this xdr_reserve_space can help us enforce various limits.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-30 17:32:01 -04:00
J. Bruce Fields
2825a7f907 nfsd4: allow encoding across page boundaries
After this we can handle for example getattr of very large ACLs.

Read, readdir, readlink are still special cases with their own limits.

Also we can't handle a new operation starting close to the end of a
page.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-30 17:31:54 -04:00
J. Bruce Fields
3e19ce762b rpc: xdr_truncate_encode
This will be used in the server side in a few cases:
	- when certain operations (read, readdir, readlink) fail after
	  encoding a partial response.
	- when we run out of space after encoding a partial response.
	- in readlink, where we initially reserve PAGE_SIZE bytes for
	  data, then truncate to the actual size.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-30 17:31:47 -04:00
David Rientjes
c6c8fe79a8 net, sunrpc: suppress allocation warning in rpc_malloc()
rpc_malloc() allocates with GFP_NOWAIT without making any attempt at
reclaim so it easily fails when low on memory.  This ends up spamming the
kernel log:

SLAB: Unable to allocate memory on node 0 (gfp=0x4000)
  cache: kmalloc-8192, object size: 8192, order: 1
  node 0: slabs: 207/207, objs: 207/207, free: 0
rekonq: page allocation failure: order:1, mode:0x204000
CPU: 2 PID: 14321 Comm: rekonq Tainted: G           O  3.15.0-rc3-12.gfc9498b-desktop+ #6
Hardware name: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 2105    07/23/2010
 0000000000000000 ffff880010ff17d0 ffffffff815e693c 0000000000204000
 ffff880010ff1858 ffffffff81137bd2 0000000000000000 0000001000000000
 ffff88011ffebc38 0000000000000001 0000000000204000 ffff88011ffea000
Call Trace:
 [<ffffffff815e693c>] dump_stack+0x4d/0x6f
 [<ffffffff81137bd2>] warn_alloc_failed+0xd2/0x140
 [<ffffffff8113be19>] __alloc_pages_nodemask+0x7e9/0xa30
 [<ffffffff811824a8>] kmem_getpages+0x58/0x140
 [<ffffffff81183de6>] fallback_alloc+0x1d6/0x210
 [<ffffffff81183be3>] ____cache_alloc_node+0x123/0x150
 [<ffffffff81185953>] __kmalloc+0x203/0x490
 [<ffffffffa06b0ee2>] rpc_malloc+0x32/0xa0 [sunrpc]
 [<ffffffffa06a6999>] call_allocate+0xb9/0x170 [sunrpc]
 [<ffffffffa06b19d8>] __rpc_execute+0x88/0x460 [sunrpc]
 [<ffffffffa06b2da9>] rpc_execute+0x59/0xc0 [sunrpc]
 [<ffffffffa06a932b>] rpc_run_task+0x6b/0x90 [sunrpc]
 [<ffffffffa077b5c1>] nfs4_call_sync_sequence+0x51/0x80 [nfsv4]
 [<ffffffffa077d45d>] _nfs4_do_setattr+0x1ed/0x280 [nfsv4]
 [<ffffffffa0782a72>] nfs4_do_setattr+0x72/0x180 [nfsv4]
 [<ffffffffa078334c>] nfs4_proc_setattr+0xbc/0x140 [nfsv4]
 [<ffffffffa074a7e8>] nfs_setattr+0xd8/0x240 [nfs]
 [<ffffffff811baa71>] notify_change+0x231/0x380
 [<ffffffff8119cf5c>] chmod_common+0xfc/0x120
 [<ffffffff8119df80>] SyS_chmod+0x40/0x90
 [<ffffffff815f4cfd>] system_call_fastpath+0x1a/0x1f
...

If the allocation fails, simply return NULL and avoid spamming the kernel
log.

Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-29 11:11:51 -04:00
Tom Herbert
0f8066bd48 sunrpc: Remove sk_no_check setting
Setting sk_no_check to UDP_CSUM_NORCV seems to have no effect.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23 16:28:53 -04:00
NeilBrown
ef11ce2487 SUNRPC: track whether a request is coming from a loop-back interface.
If an incoming NFS request is coming from the local host, then
nfsd will need to perform some special handling.  So detect that
possibility and make the source visible in rq_local.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-22 15:59:18 -04:00
Trond Myklebust
c789102c20 SUNRPC: Fix a module reference leak in svc_handle_xprt
If the accept() call fails, we need to put the module reference.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-22 15:57:22 -04:00
Chuck Lever
16e4d93f6d NFSD: Ignore client's source port on RDMA transports
An NFS/RDMA client's source port is meaningless for RDMA transports.
The transport layer typically sets the source port value on the
connection to a random ephemeral port.

Currently, NFS server administrators must specify the "insecure"
export option to enable clients to access exports via RDMA.

But this means NFS clients can access such an export via IP using an
ephemeral port, which may not be desirable.

This patch eliminates the need to specify the "insecure" export
option to allow NFS/RDMA clients access to an export.

BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=250
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-22 15:55:48 -04:00
Trond Myklebust
7a9a7b774f SUNRPC: Fix a module reference issue in rpcsec_gss
We're not taking a reference in the case where _gss_mech_get_by_pseudoflavor
loops without finding the correct rpcsec_gss flavour, so why are we
releasing it?

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-18 13:47:14 -04:00
Kinglong Mee
ecca063b31 SUNRPC: Fix printk that is not only for nfsd
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-08 14:59:51 -04:00
Peter Zijlstra
4e857c58ef arch: Mass conversion of smp_mb__*()
Mostly scripted conversion of the smp_mb__* barriers.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 14:20:48 +02:00
Linus Torvalds
454fd351f2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull yet more networking updates from David Miller:

 1) Various fixes to the new Redpine Signals wireless driver, from
    Fariya Fatima.

 2) L2TP PPP connect code takes PMTU from the wrong socket, fix from
    Dmitry Petukhov.

 3) UFO and TSO packets differ in whether they include the protocol
    header in gso_size, account for that in skb_gso_transport_seglen().
   From Florian Westphal.

 4) If VLAN untagging fails, we double free the SKB in the bridging
    output path.  From Toshiaki Makita.

 5) Several call sites of sk->sk_data_ready() were referencing an SKB
    just added to the socket receive queue in order to calculate the
    second argument via skb->len.  This is dangerous because the moment
    the skb is added to the receive queue it can be consumed in another
    context and freed up.

    It turns out also that none of the sk->sk_data_ready()
    implementations even care about this second argument.

    So just kill it off and thus fix all these use-after-free bugs as a
    side effect.

 6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti.

 7) pktgen needs to do locking properly for LLTX devices, from Daniel
    Borkmann.

 8) xen-netfront driver initializes TX array entries in RX loop :-) From
    Vincenzo Maffione.

 9) After refactoring, some tunnel drivers allow a tunnel to be
    configured on top itself.  Fix from Nicolas Dichtel.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
  vti: don't allow to add the same tunnel twice
  gre: don't allow to add the same tunnel twice
  drivers: net: xen-netfront: fix array initialization bug
  pktgen: be friendly to LLTX devices
  r8152: check RTL8152_UNPLUG
  net: sun4i-emac: add promiscuous support
  net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  net: ipv6: Fix oif in TCP SYN+ACK route lookup.
  drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts
  drivers: net: cpsw: discard all packets received when interface is down
  net: Fix use after free by removing length arg from sk_data_ready callbacks.
  Drivers: net: hyperv: Address UDP checksum issues
  Drivers: net: hyperv: Negotiate suitable ndis version for offload support
  Drivers: net: hyperv: Allocate memory for all possible per-pecket information
  bridge: Fix double free and memory leak around br_allowed_ingress
  bonding: Remove debug_fs files when module init fails
  i40evf: program RSS LUT correctly
  i40evf: remove open-coded skb_cow_head
  ixgb: remove open-coded skb_cow_head
  igbvf: remove open-coded skb_cow_head
  ...
2014-04-12 17:31:22 -07:00
David S. Miller
676d23690f net: Fix use after free by removing length arg from sk_data_ready callbacks.
Several spots in the kernel perform a sequence like:

	skb_queue_tail(&sk->s_receive_queue, skb);
	sk->sk_data_ready(sk, skb->len);

But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up.  So this skb->len access is potentially
to freed up memory.

Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.

And finally, no actual implementation of this callback actually uses
the length argument.  And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.

So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.

Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-11 16:15:36 -04:00
Linus Torvalds
75ff24fa52 Merge branch 'for-3.15' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
 "Highlights:
   - server-side nfs/rdma fixes from Jeff Layton and Tom Tucker
   - xdr fixes (a larger xdr rewrite has been posted but I decided it
     would be better to queue it up for 3.16).
   - miscellaneous fixes and cleanup from all over (thanks especially to
     Kinglong Mee)"

* 'for-3.15' of git://linux-nfs.org/~bfields/linux: (36 commits)
  nfsd4: don't create unnecessary mask acl
  nfsd: revert v2 half of "nfsd: don't return high mode bits"
  nfsd4: fix memory leak in nfsd4_encode_fattr()
  nfsd: check passed socket's net matches NFSd superblock's one
  SUNRPC: Clear xpt_bc_xprt if xs_setup_bc_tcp failed
  NFSD/SUNRPC: Check rpc_xprt out of xs_setup_bc_tcp
  SUNRPC: New helper for creating client with rpc_xprt
  NFSD: Free backchannel xprt in bc_destroy
  NFSD: Clear wcc data between compound ops
  nfsd: Don't return NFS4ERR_STALE_STATEID for NFSv4.1+
  nfsd4: fix nfs4err_resource in 4.1 case
  nfsd4: fix setclientid encode size
  nfsd4: remove redundant check from nfsd4_check_resp_size
  nfsd4: use more generous NFS4_ACL_MAX
  nfsd4: minor nfsd4_replay_cache_entry cleanup
  nfsd4: nfsd4_replay_cache_entry should be static
  nfsd4: update comments with obsolete function name
  rpc: Allow xdr_buf_subsegment to operate in-place
  NFSD: Using free_conn free connection
  SUNRPC: fix memory leak of peer addresses in XPRT
  ...
2014-04-08 18:28:14 -07:00
Linus Torvalds
2b3a8fd735 NFS client updates for Linux 3.15
Highlights include:
 
 - Stable fix for a use after free issue in the NFSv4.1 open code
 - Fix the SUNRPC bi-directional RPC code to account for TCP segmentation
 - Optimise usage of readdirplus when confronted with 'ls -l' situations
 - Soft mount bugfixes
 - NFS over RDMA bugfixes
 - NFSv4 close locking fixes
 - Various NFSv4.x client state management optimisations
 - Rename/unlink code cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTQBayAAoJEGcL54qWCgDyUzgQAKzSlbcksMQT55M/KZJXabNW
 KSctJeDrkTkRxOXTNxuF9NbIgeqenLijCokXty6BIUgup0zkOPMzFfRfgdQvplnp
 YEj4sOEXEZ8CX+PoUTYOEayzt0ssEAOyidumiM+Gx2LD/E1d2xyCL7YaAOjIhVQS
 OnXcX1cZw+dZSUxC9vu5fVDjrphJTnp4CXdbvR5PiJiXeKqzZd9e5M3hXgpAQ/AS
 mWjYeUvM9mwyz7UmbLKkWEmzB3tFlGdTzDPxLRrkfcOSKI2Ham0lL3/Uv50/nRTu
 99ts6KH8KLGcUuL9vD9KRebht2f71usBrWAdvpy1cUcf1Fh6lmEg4ktGfkqldaUu
 9kNu9d5DCxJoGc6R2UTw5FeyPwYuDWoBwEGy1DcguJ5CeQn2R2nH4ps/P3J3DX4d
 DZsJqCY9idKZCQhtyR0iF9j3x2bNFoENaL6WHI6b0J+xjMedIbHgeUQzIQP0RLBJ
 h0IcjK0D+e7WdyC7jk4Nm3krtms5SNUG5/N9OUO36a7v8735PJBcbcgm9hZJt8Fh
 t/4vqUmKIBXHioHsMhaFslqTWlYIR9a3MYmN7QtHFYbqUfNxH69v9y3d6jb4Igck
 kqoEiui5aJOCR76s7oVdHCcm+klBwEPiACT+H9CUMzSoKzHSWsBSNZbJR3BEia4M
 7dwScS1OfI2KuutshGQA
 =weNx
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

   - Stable fix for a use after free issue in the NFSv4.1 open code
   - Fix the SUNRPC bi-directional RPC code to account for TCP segmentation
   - Optimise usage of readdirplus when confronted with 'ls -l' situations
   - Soft mount bugfixes
   - NFS over RDMA bugfixes
   - NFSv4 close locking fixes
   - Various NFSv4.x client state management optimisations
   - Rename/unlink code cleanups"

* tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits)
  nfs: pass string length to pr_notice message about readdir loops
  NFSv4: Fix a use-after-free problem in open()
  SUNRPC: rpc_restart_call/rpc_restart_call_prepare should clear task->tk_status
  SUNRPC: Don't let rpc_delay() clobber non-timeout errors
  SUNRPC: Ensure call_connect_status() deals correctly with SOFTCONN tasks
  SUNRPC: Ensure call_status() deals correctly with SOFTCONN tasks
  NFSv4: Ensure we respect soft mount timeouts during trunking discovery
  NFSv4: Schedule recovery if nfs40_walk_client_list() is interrupted
  NFS: advertise only supported callback netids
  SUNRPC: remove KERN_INFO from dprintk() call sites
  SUNRPC: Fix large reads on NFS/RDMA
  NFS: Clean up: revert increase in READDIR RPC buffer max size
  SUNRPC: Ensure that call_bind times out correctly
  SUNRPC: Ensure that call_connect times out correctly
  nfs: emit a fsnotify_nameremove call in sillyrename codepath
  nfs: remove synchronous rename code
  nfs: convert nfs_rename to use async_rename infrastructure
  nfs: make nfs_async_rename non-static
  nfs: abstract out code needed to complete a sillyrename
  NFSv4: Clear the open state flags if the new stateid does not match
  ...
2014-04-06 10:09:38 -07:00
Stanislav Kinsbursky
3064639423 nfsd: check passed socket's net matches NFSd superblock's one
There could be a case, when NFSd file system is mounted in network, different
to socket's one, like below:

"ip netns exec" creates new network and mount namespace, which duplicates NFSd
mount point, created in init_net context. And thus NFS server stop in nested
network context leads to RPCBIND client destruction in init_net.
Then, on NFSd start in nested network context, rpc.nfsd process creates socket
in nested net and passes it into "write_ports", which leads to RPCBIND sockets
creation in init_net context because of the same reason (NFSd monut point was
created in init_net context). An attempt to register passed socket in nested
net leads to panic, because no RPCBIND client present in nexted network
namespace.

This patch add check that passed socket's net matches NFSd superblock's one.
And returns -EINVAL error to user psace otherwise.

v2: Put socket on exit.

Reported-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-03-31 16:58:16 -04:00