Commit Graph

3362 Commits

Author SHA1 Message Date
Hannes Frederic Sowa
307f2fb95e ipv6: only static routes qualify for equal cost multipathing
Static routes in this case are non-expiring routes which did not get
configured by autoconf or by icmpv6 redirects.

To make sure we actually get an ecmp route while searching for the first
one in this fib6_node's leafs, also make sure it matches the ecmp route
assumptions.

v2:
a) Removed RTF_EXPIRE check in dst.from chain. The check of RTF_ADDRCONF
   already ensures that this route, even if added again without
   RTF_EXPIRES (in case of a RA announcement with infinite timeout),
   does not cause the rt6i_nsiblings logic to go wrong if a later RA
   updates the expiration time later.

v3:
a) Allow RTF_EXPIRES routes to enter the ecmp route set. We have to do so,
   because an pmtu event could update the RTF_EXPIRES flag and we would
   not count this route, if another route joins this set. We now filter
   only for RTF_GATEWAY|RTF_ADDRCONF|RTF_DYNAMIC, which are flags that
   don't get changed after rt6_info construction.

Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12 16:29:54 -07:00
Hannes Frederic Sowa
afc154e978 ipv6: fix route selection if kernel is not compiled with CONFIG_IPV6_ROUTER_PREF
This is a follow-up patch to 3630d40067
("ipv6: rt6_check_neigh should successfully verify neigh if no NUD
information are available").

Since the removal of rt->n in rt6_info we can end up with a dst ==
NULL in rt6_check_neigh. In case the kernel is not compiled with
CONFIG_IPV6_ROUTER_PREF we should also select a route with unkown
NUD state but we must not avoid doing round robin selection on routes
with the same target. So introduce and pass down a boolean ``do_rr'' to
indicate when we should update rt->rr_ptr. As soon as no route is valid
we do backtracking and do a lookup on a higher level in the fib trie.

v2:
a) Improved rt6_check_neigh logic (no need to create neighbour there)
   and documented return values.

v3:
a) Introduce enum rt6_nud_state to get rid of the magic numbers
   (thanks to David Miller).
b) Update and shorten commit message a bit to actualy reflect
   the source.

Reported-by: Pierre Emeriaud <petrus.lt@gmail.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11 11:51:10 -07:00
Hannes Frederic Sowa
1eb4f75828 ipv6: in case of link failure remove route directly instead of letting it expire
We could end up expiring a route which is part of an ecmp route set. Doing
so would invalidate the rt->rt6i_nsiblings calculations and could provoke
the following panic:

[   80.144667] ------------[ cut here ]------------
[   80.145172] kernel BUG at net/ipv6/ip6_fib.c:733!
[   80.145172] invalid opcode: 0000 [#1] SMP
[   80.145172] Modules linked in: 8021q nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables
+snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer virtio_balloon snd soundcore i2c_piix4 i2c_core virtio_net virtio_blk
[   80.145172] CPU: 1 PID: 786 Comm: ping6 Not tainted 3.10.0+ #118
[   80.145172] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[   80.145172] task: ffff880117fa0000 ti: ffff880118770000 task.ti: ffff880118770000
[   80.145172] RIP: 0010:[<ffffffff815f3b5d>]  [<ffffffff815f3b5d>] fib6_add+0x75d/0x830
[   80.145172] RSP: 0018:ffff880118771798  EFLAGS: 00010202
[   80.145172] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88011350e480
[   80.145172] RDX: ffff88011350e238 RSI: 0000000000000004 RDI: ffff88011350f738
[   80.145172] RBP: ffff880118771848 R08: ffff880117903280 R09: 0000000000000001
[   80.145172] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011350f680
[   80.145172] R13: ffff880117903280 R14: ffff880118771890 R15: ffff88011350ef90
[   80.145172] FS:  00007f02b5127740(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000
[   80.145172] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   80.145172] CR2: 00007f981322a000 CR3: 00000001181b1000 CR4: 00000000000006e0
[   80.145172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   80.145172] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   80.145172] Stack:
[   80.145172]  0000000000000001 ffff880100000000 ffff880100000000 ffff880117903280
[   80.145172]  0000000000000000 ffff880119a4cf00 0000000000000400 00000000000007fa
[   80.145172]  0000000000000000 0000000000000000 0000000000000000 ffff88011350f680
[   80.145172] Call Trace:
[   80.145172]  [<ffffffff815eeceb>] ? rt6_bind_peer+0x4b/0x90
[   80.145172]  [<ffffffff815ed985>] __ip6_ins_rt+0x45/0x70
[   80.145172]  [<ffffffff815eee35>] ip6_ins_rt+0x35/0x40
[   80.145172]  [<ffffffff815ef1e4>] ip6_pol_route.isra.44+0x3a4/0x4b0
[   80.145172]  [<ffffffff815ef34a>] ip6_pol_route_output+0x2a/0x30
[   80.145172]  [<ffffffff81616077>] fib6_rule_action+0xd7/0x210
[   80.145172]  [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30
[   80.145172]  [<ffffffff81553026>] fib_rules_lookup+0xc6/0x140
[   80.145172]  [<ffffffff81616374>] fib6_rule_lookup+0x44/0x80
[   80.145172]  [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30
[   80.145172]  [<ffffffff815edea3>] ip6_route_output+0x73/0xb0
[   80.145172]  [<ffffffff815dfdf3>] ip6_dst_lookup_tail+0x2c3/0x2e0
[   80.145172]  [<ffffffff813007b1>] ? list_del+0x11/0x40
[   80.145172]  [<ffffffff81082a4c>] ? remove_wait_queue+0x3c/0x50
[   80.145172]  [<ffffffff815dfe4d>] ip6_dst_lookup_flow+0x3d/0xa0
[   80.145172]  [<ffffffff815fda77>] rawv6_sendmsg+0x267/0xc20
[   80.145172]  [<ffffffff815a8a83>] inet_sendmsg+0x63/0xb0
[   80.145172]  [<ffffffff8128eb93>] ? selinux_socket_sendmsg+0x23/0x30
[   80.145172]  [<ffffffff815218d6>] sock_sendmsg+0xa6/0xd0
[   80.145172]  [<ffffffff81524a68>] SYSC_sendto+0x128/0x180
[   80.145172]  [<ffffffff8109825c>] ? update_curr+0xec/0x170
[   80.145172]  [<ffffffff81041d09>] ? kvm_clock_get_cycles+0x9/0x10
[   80.145172]  [<ffffffff810afd1e>] ? __getnstimeofday+0x3e/0xd0
[   80.145172]  [<ffffffff8152509e>] SyS_sendto+0xe/0x10
[   80.145172]  [<ffffffff8164efd9>] system_call_fastpath+0x16/0x1b
[   80.145172] Code: fe ff ff 41 f6 45 2a 06 0f 85 ca fe ff ff 49 8b 7e 08 4c 89 ee e8 94 ef ff ff e9 b9 fe ff ff 48 8b 82 28 05 00 00 e9 01 ff ff ff <0f> 0b 49 8b 54 24 30 0d 00 00 40 00 89 83 14 01 00 00 48 89 53
[   80.145172] RIP  [<ffffffff815f3b5d>] fib6_add+0x75d/0x830
[   80.145172]  RSP <ffff880118771798>
[   80.387413] ---[ end trace 02f20b7a8b81ed95 ]---
[   80.390154] Kernel panic - not syncing: Fatal exception in interrupt

Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10 19:45:39 -07:00
Eliezer Tamir
8b80cda536 net: rename ll methods to busy-poll
Rename ndo_ll_poll to ndo_busy_poll.
Rename sk_mark_ll to sk_mark_napi_id.
Rename skb_mark_ll to skb_mark_napi_id.
Correct all useres of these functions.
Update comments and defines  in include/net/busy_poll.h

Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10 17:08:27 -07:00
Eliezer Tamir
076bb0c82a net: rename include/net/ll_poll.h to include/net/busy_poll.h
Rename the file and correct all the places where it is included.

Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10 17:08:27 -07:00
Nicolas Dichtel
86bd68bfd7 sit: fix tunnel update via netlink
The device can stand in another netns, hence we need to do the lookup in netns
tunnel->net.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04 14:55:47 -07:00
Hannes Frederic Sowa
3630d40067 ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
After the removal of rt->n we do not create a neighbour entry at route
insertion time (rt6_bind_neighbour is gone). As long as no neighbour is
created because of "useful traffic" we skip this routing entry because
rt6_check_neigh cannot pick up a valid neighbour (neigh == NULL) and
thus returns false.

This change was introduced by commit
887c95cc1d ("ipv6: Complete neighbour
entry removal from dst_entry.")

To quote RFC4191:
"If the host has no information about the router's reachability, then
the host assumes the router is reachable."

and also:
"A host MUST NOT probe a router's reachability in the absence of useful
traffic that the host would have sent to the router if it were reachable."

So, just assume the router is reachable and let's rt6_probe do the
rest. We don't need to create a neighbour on route insertion time.

If we don't compile with CONFIG_IPV6_ROUTER_PREF (RFC4191 support)
a neighbour is only valid if its nud_state is NUD_VALID. I did not find
any references that we should probe the router on route insertion time
via the other RFCs. So skip this route in that case.

v2:
a) use IS_ENABLED instead of #ifdefs (thanks to Sergei Shtylyov)

Reported-by: Pierre Emeriaud <petrus.lt@gmail.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03 17:50:51 -07:00
Lorenzo Colitti
fbfe80c890 net: ipv6: fix wrong ping_v6_sendmsg return value
ping_v6_sendmsg currently returns 0 on success. It should return
the number of bytes written instead.

Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03 17:42:05 -07:00
Lorenzo Colitti
a1bdc45580 net: ipv6: add missing lock in ping_v6_sendmsg
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03 17:40:58 -07:00
David S. Miller
0c1072ae02 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/freescale/fec_main.c
	drivers/net/ethernet/renesas/sh_eth.c
	net/ipv4/gre.c

The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list)
and the splitting of the gre.c code into seperate files.

The FEC conflict was two sets of changes adding ethtool support code
in an "!CONFIG_M5272" CPP protected block.

Finally the sh_eth.c conflict was between one commit add bits set
in the .eesr_err_check mask whilst another commit removed the
.tx_error_check member and assignments.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03 14:55:13 -07:00
Hannes Frederic Sowa
75a493e60a ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size
If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track
of this when appending the second frame on a corked socket. This results
in the following splat:

[37598.993962] ------------[ cut here ]------------
[37598.994008] kernel BUG at net/core/skbuff.c:2064!
[37598.994008] invalid opcode: 0000 [#1] SMP
[37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat
+nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi
+scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm
[37598.994008]  snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc
+dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video
[37598.994008] CPU 0
[37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG
[37598.994008] RIP: 0010:[<ffffffff815443a5>]  [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008] RSP: 0018:ffff88003670da18  EFLAGS: 00010202
[37598.994008] RAX: ffff88018105c018 RBX: 0000000000000004 RCX: 00000000000006c0
[37598.994008] RDX: ffff88018105a6c0 RSI: ffff88018105a000 RDI: ffff8801e1b0aa00
[37598.994008] RBP: ffff88003670da78 R08: 0000000000000000 R09: ffff88018105c040
[37598.994008] R10: ffff8801e1b0aa00 R11: 0000000000000000 R12: 000000000000fff8
[37598.994008] R13: 00000000000004fc R14: 00000000ffff0504 R15: 0000000000000000
[37598.994008] FS:  00007f28eea59740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000
[37598.994008] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[37598.994008] CR2: 0000003d935789e0 CR3: 00000000365cb000 CR4: 00000000000407f0
[37598.994008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[37598.994008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[37598.994008] Process t2 (pid: 27320, threadinfo ffff88003670c000, task ffff88022c162ee0)
[37598.994008] Stack:
[37598.994008]  ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8
[37598.994008]  ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200
[37598.994008]  0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4
[37598.994008] Call Trace:
[37598.994008]  [<ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0
[37598.994008]  [<ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0
[37598.994008]  [<ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40
[37598.994008]  [<ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10
[37598.994008]  [<ffffffff812a2845>] ? sock_has_perm+0x75/0x90
[37598.994008]  [<ffffffff815c3693>] inet_sendmsg+0x63/0xb0
[37598.994008]  [<ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30
[37598.994008]  [<ffffffff8153a450>] sock_sendmsg+0xb0/0xe0
[37598.994008]  [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0
[37598.994008]  [<ffffffff8153d97d>] sys_sendto+0x12d/0x180
[37598.994008]  [<ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0
[37598.994008]  [<ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240
[37598.994008]  [<ffffffff8166a7e7>] tracesys+0xdd/0xe2
[37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48
[37598.994008] RIP  [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008]  RSP <ffff88003670da18>
[37599.007323] ---[ end trace d69f6a17f8ac8eee ]---

While there, also check if path mtu discovery is activated for this
socket. The logic was adapted from ip6_append_data when first writing
on the corked socket.

This bug was introduced with commit
0c1833797a ("ipv6: fix incorrect ipsec
fragment").

v2:
a) Replace IPV6_PMTU_DISC_DO with IPV6_PMTUDISC_PROBE.
b) Don't pass ipv6_pinfo to ip6_append_data_mtu (suggestion by Gao
   feng, thanks!).
c) Change mtu to unsigned int, else we get a warning about
   non-matching types because of the min()-macro type-check.

Acked-by: Gao feng <gaofeng@cn.fujitsu.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02 12:44:18 -07:00
Hannes Frederic Sowa
8822b64a0f ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data
We accidentally call down to ip6_push_pending_frames when uncorking
pending AF_INET data on a ipv6 socket. This results in the following
splat (from Dave Jones):

skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:126!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth
+netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c
CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37
task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000
RIP: 0010:[<ffffffff816e759c>]  [<ffffffff816e759c>] skb_panic+0x63/0x65
RSP: 0018:ffff8801e6431de8  EFLAGS: 00010282
RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006
RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520
RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800
R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800
FS:  00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Stack:
 ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4
 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6
 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0
Call Trace:
 [<ffffffff8159a9aa>] skb_push+0x3a/0x40
 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0
 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140
 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0
 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20
 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0
 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0
 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40
 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20
 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0
 [<ffffffff816f5d54>] tracesys+0xdd/0xe2
Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55
RIP  [<ffffffff816e759c>] skb_panic+0x63/0x65
 RSP <ffff8801e6431de8>

This patch adds a check if the pending data is of address family AF_INET
and directly calls udp_push_ending_frames from udp_v6_push_pending_frames
if that is the case.

This bug was found by Dave Jones with trinity.

(Also move the initialization of fl6 below the AF_INET check, even if
not strictly necessary.)

Cc: Dave Jones <davej@redhat.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02 12:44:18 -07:00
Amerigo Wang
8965779d2c ipv6,mcast: always hold idev->lock before mca_lock
dingtianhong reported the following deadlock detected by lockdep:

 ======================================================
 [ INFO: possible circular locking dependency detected ]
 3.4.24.05-0.1-default #1 Not tainted
 -------------------------------------------------------
 ksoftirqd/0/3 is trying to acquire lock:
  (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120

 but task is already holding lock:
  (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&mc->mca_lock){+.+...}:
        [<ffffffff810a8027>] validate_chain+0x637/0x730
        [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500
        [<ffffffff810a8734>] lock_acquire+0x114/0x150
        [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60
        [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120
        [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60
        [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80
        [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0
        [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80
        [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20
        [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60
        [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80
        [<ffffffff813d9360>] dev_change_flags+0x40/0x70
        [<ffffffff813ea627>] do_setlink+0x237/0x8a0
        [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600
        [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310
        [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0
        [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40
        [<ffffffff81403e20>] netlink_unicast+0x140/0x180
        [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380
        [<ffffffff813c4252>] sock_sendmsg+0x112/0x130
        [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460
        [<ffffffff813c5544>] sys_sendmsg+0x44/0x70
        [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b

 -> #0 (&ndev->lock){+.+...}:
        [<ffffffff810a798e>] check_prev_add+0x3de/0x440
        [<ffffffff810a8027>] validate_chain+0x637/0x730
        [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500
        [<ffffffff810a8734>] lock_acquire+0x114/0x150
        [<ffffffff814f6c82>] rt_read_lock+0x42/0x60
        [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120
        [<ffffffff8149b036>] mld_newpack+0xb6/0x160
        [<ffffffff8149b18b>] add_grhead+0xab/0xc0
        [<ffffffff8149d03b>] add_grec+0x3ab/0x460
        [<ffffffff8149d14a>] mld_send_report+0x5a/0x150
        [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0
        [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0
        [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0
        [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0
        [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0
        [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210
        [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0
        [<ffffffff8106c7de>] kthread+0xae/0xc0
        [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10

actually we can just hold idev->lock before taking pmc->mca_lock,
and avoid taking idev->lock again when iterating idev->addr_list,
since the upper callers of mld_newpack() already take
read_lock_bh(&idev->lock).

Reported-by: dingtianhong <dingtianhong@huawei.com>
Cc: dingtianhong <dingtianhong@huawei.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Tested-by: Ding Tianhong <dingtianhong@huawei.com>
Tested-by: Chen Weilong <chenweilong@huawei.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01 23:39:21 -07:00
Nicolas Dichtel
52bd4c0c15 ipv6: fix ecmp lookup when oif is specified
There is no reason to skip ECMP lookup when oif is specified, but this implies
to check oif given by user when selecting another route.
When the new route does not match oif requirement, we simply keep the initial
one.

Spotted-by: dingzhi <zhi.ding@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01 13:27:38 -07:00
Hannes Frederic Sowa
5c29fb12e8 ipv6: only apply anti-spoofing checks to not-pointopoint tunnels
Because of commit 218774dc34 ("ipv6: add
anti-spoofing checks for 6to4 and 6rd") the sit driver dropped packets
for 2002::/16 destinations and sources even when configured to work as a
tunnel with fixed endpoint. We may only apply the 6rd/6to4 anti-spoofing
checks if the device is not in pointopoint mode.

This was an oversight from me in the above commit, sorry.  Thanks to
Roman Mamedov for reporting this!

Reported-by: Roman Mamedov <rm@romanrm.ru>
Cc: David Miller <davem@davemloft.net>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01 13:26:18 -07:00
Hannes Frederic Sowa
b173ee488d ipv6: resend MLD report if a link-local address completes DAD
RFC3590/RFC3810 specifies we should resend MLD reports as soon as a
valid link-local address is available.

We now use the valid_ll_addr_cnt to check if it is necessary to resend
a new report.

Changes since Flavio Leitner's version:
a) adapt for valid_ll_addr_cnt
b) resend first reports directly in the path and just arm the timer for
   mc_qrv-1 resends.

Reported-by: Flavio Leitner <fleitner@redhat.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Stevens <dlstevens@us.ibm.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28 21:19:17 -07:00
Hannes Frederic Sowa
1ec047eb47 ipv6: introduce per-interface counter for dad-completed ipv6 addresses
To reduce the number of unnecessary router solicitations, MLDv2 and IGMPv3
messages we need to track the number of valid (as in non-optimistic,
no-dad-failed and non-tentative) link-local addresses. Therefore, this
patch implements a valid_ll_addr_cnt in struct inet6_dev.

We now only emit router solicitations if the first link-local address
finishes duplicate address detection.

The changes for MLDv2 and IGMPv3 are in a follow-up patch.

While there, also simplify one if statement(one minor nit I made in one
of my previous patches):

if (!...)
	do();
else
	return;

<<into>>

if (...)
	return;
do();

Cc: Flavio Leitner <fbl@redhat.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: David Stevens <dlstevens@us.ibm.com>
Suggested-by: David Stevens <dlstevens@us.ibm.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28 21:19:17 -07:00
Nicolas Dichtel
5e6700b3bf sit: add support of x-netns
This patch allows to switch the netns when packet is encapsulated or
decapsulated. In other word, the encapsulated packet is received in a netns,
where the lookup is done to find the tunnel. Once the tunnel is found, the
packet is decapsulated and injecting into the corresponding interface which
stands to another netns.

When one of the two netns is removed, the tunnel is destroyed.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-27 22:30:47 -07:00
Hannes Frederic Sowa
77ecaace6c ipv6: rearm router solicitaion timer when setting new tokenized address
When a new tokenized address gets installed we send out just one
router solicition. We should send out `rtr_solicits' in case one router
advertisment got lost.

So, rearm the timer as we do in addrconf_dad_complete.

Cc: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26 15:23:01 -07:00
Eric Dumazet
a963a37d38 ipv6: ip6_sk_dst_check() must not assume ipv6 dst
It's possible to use AF_INET6 sockets and to connect to an IPv4
destination. After this, socket dst cache is a pointer to a rtable,
not rt6_info.

ip6_sk_dst_check() should check the socket dst cache is IPv6, or else
various corruptions/crashes can happen.

Dave Jones can reproduce immediate crash with
trinity -q -l off -n -c sendmsg -c connect

With help from Hannes Frederic Sowa

Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26 15:13:47 -07:00
Hannes Frederic Sowa
2b9651d72d ipv6: remove old token ipv6 address as soon as possible
If the tokenized ip address is re-set on an interface we depend on the
arrival of a new router advertisment to call addrconf_verify to clean
up the old address (which valid_lft is now set to 0). Old addresses can
linger around for a longer time if e.g. the source of router advertisments
vanishes.

So, call addrconf_verify immediately after setting the new tokenized
address to get rid of the old tokenized addresses.

Cc: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25 16:28:24 -07:00
Hannes Frederic Sowa
dc8482926e ipv6: check return value of ipv6_get_lladdr
We should check the return value of ipv6_get_lladdr in inet6_set_iftoken.

A possible situation, which could leave ll_addr unassigned is, when
the user removed her link-local address but a global scoped address was
already set. In this case the interface would still be IF_READY and not
dead. In that case the RS source address is some value from the stack.

v2: Daniel Borkmann noted a small indent inconstancy; no semantic
changes.

Cc: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Reviewed-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25 16:27:28 -07:00
Hannes Frederic Sowa
876fd05ddb ipv6: don't disable interface if last ipv6 address is removed
The reason behind this change is that as soon as we delete
the last ipv6 address of an interface we also lose the
/proc/sys/net/ipv6/conf/<interface> directory. This seems to be a
usability problem for me.

I don't see any reason why we should shutdown ipv6 on that interface in
such cases.

Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25 16:23:03 -07:00
Hannes Frederic Sowa
b7b1bfce0b ipv6: split duplicate address detection and router solicitation timer
This patch splits the timers for duplicate address detection and router
solicitations apart. The router solicitations timer goes into inet6_dev
and the dad timer stays in inet6_ifaddr.

The reason behind this patch is to reduce the number of unneeded router
solicitations send out by the host if additional link-local addresses
are created. Currently we send out RS for every link-local address on
an interface.

If the RS timer fires we pick a source address with ipv6_get_lladdr. This
change could hurt people adding additional link-local addresses and
specifying these addresses in the radvd clients section because we
no longer guarantee that we use every ll address as source address in
router solicitations.

Cc: Flavio Leitner <fleitner@redhat.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Stevens <dlstevens@us.ibm.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reviewed-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25 16:23:03 -07:00
YOSHIFUJI Hideaki / 吉藤英明
ab4eb3537e ipv6: Process unicast packet with Router Alert by checking flag in skb.
Router Alert option is marked in skb.
Previously, IP6CB(skb)->ra was set to positive value for such packets.
Since commit dd3332bf ("ipv6: Store Router Alert option in IP6CB
directly."), IP6SKB_ROUTERALERT is set in IP6CB(skb)->flags, and
the value of Router Alert option (in network byte order) is set
to IP6CB(skb)->ra for such packets.

Multicast forwarding path uses that flag and value, but unicast
forwarding path does not use the flag and misuses IP6CB(skb)->ra
value.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25 14:47:22 -07:00
Eric Dumazet
6da334ee0c ipv6: add include file to suppress sparse warnings
commit f88c91ddba ("ipv6: statically link
register_inet6addr_notifier()" added following sparse warnings :

net/ipv6/addrconf_core.c:83:5: warning: symbol
'register_inet6addr_notifier' was not declared. Should it be static?
net/ipv6/addrconf_core.c:89:5: warning: symbol
'unregister_inet6addr_notifier' was not declared. Should it be static?
net/ipv6/addrconf_core.c:95:5: warning: symbol
'inet6addr_notifier_call_chain' was not declared. Should it be static?

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25 02:44:05 -07:00
David S. Miller
a3d9dd89b7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
The following patchset contains five fixes for Netfilter/IPVS, they are:

* A skb leak fix in fragmentation handling in case that helpers are in place,
  it occurs since the IPV6 NAT infrastructure, from Phil Oester.

* Fix SCTP port mangling in ICMP packets for IPVS, from Julian Anastasov.

* Fix event delivery in ctnetlink regarding the new connlabel infrastructure,
  from Florian Westphal.

* Fix mangling in the SIP NAT helper, from Balazs Peter Odor.

* Fix crash in ipt_ULOG introduced while adding netnamespace support,
  from Gao Feng.

I'll take care of passing several of these patches to -stable once they hit
Linus' tree.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 12:45:24 -07:00
Cong Wang
b33698e267 ipv6: remove a useless pr_info() in addrconf_gre_config()
This is debug info, should at least be pr_debug(), but given
that this code is in upstream for two years, there is no
need to keep this debugging printk any more, so just remove it.

Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23 18:46:36 -07:00
Phil Oester
142dcdd3c2 netfilter: nf_conntrack_ipv6: Plug sk_buff leak in fragment handling
In commit 4cdd3408 ("netfilter: nf_conntrack_ipv6: improve fragmentation
handling"), an sk_buff leak was introduced when dealing with reassembled
packets by grabbing a reference to the original skb instead of the
reassembled skb.  At this point, the leak only impacted conntracks with an
associated helper.

In commit 58a317f1 ("netfilter: ipv6: add IPv6 NAT support"), the bug was
expanded to include all reassembled packets with unconfirmed conntracks.

Fix this by grabbing a reference to the proper reassembled skb.  This
closes netfilter bugzilla #823.

Signed-off-by: Phil Oester <kernel@linuxace.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-06-20 12:01:24 +02:00
Gao feng
a881ae1f62 ipv6: don't call addrconf_dst_alloc again when enable lo
If we disable all of the net interfaces, and enable
un-lo interface before lo interface, we already allocated
the addrconf dst in ipv6_add_addr. So we shouldn't allocate
it again when we enable lo interface.

Otherwise the message below will be triggered.
unregister_netdevice: waiting for sit1 to become free. Usage count = 1

This problem is introduced by commit 25fb6ca4ed
"net IPv6 : Fix broken IPv6 routing table after loopback down-up"

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19 23:04:50 -07:00
Nicolas Dichtel
c2ff682a6f sit: fix an oops when IFLA_IPTUN_PROTO is not set
The use of this attribute has been added in 32b8a8e59c (sit: add IPv4 over
IPv4 support). It is optional, by default proto is IPPROTO_IPV6.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19 21:18:17 -07:00
Pravin B Shelar
3d7b46cd20 ip_tunnel: push generic protocol handling to ip_tunnel module.
Process skb tunnel header before sending packet to protocol handler.
this allows code sharing between gre and ovs gre modules.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19 18:07:41 -07:00
Pravin B Shelar
0e6fbc5b6c ip_tunnels: extend iptunnel_xmit()
Refactor various ip tunnels xmit functions and extend iptunnel_xmit()
so that there is more code sharing.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19 18:07:41 -07:00
David S. Miller
d98cae64e4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/wireless/ath/ath9k/Kconfig
	drivers/net/xen-netback/netback.c
	net/batman-adv/bat_iv_ogm.c
	net/wireless/nl80211.c

The ath9k Kconfig conflict was a change of a Kconfig option name right
next to the deletion of another option.

The xen-netback conflict was overlapping changes involving the
handling of the notify list in xen_netbk_rx_action().

Batman conflict resolution provided by Antonio Quartulli, basically
keep everything in both conflict hunks.

The nl80211 conflict is a little more involved.  In 'net' we added a
dynamic memory allocation to nl80211_dump_wiphy() to fix a race that
Linus reported.  Meanwhile in 'net-next' the handlers were converted
to use pre and post doit handlers which use a flag to determine
whether to hold the RTNL mutex around the operation.

However, the dump handlers to not use this logic.  Instead they have
to explicitly do the locking.  There were apparent bugs in the
conversion of nl80211_dump_wiphy() in that we were not dropping the
RTNL mutex in all the return paths, and it seems we very much should
be doing so.  So I fixed that whilst handling the overlapping changes.

To simplify the initial returns, I take the RTNL mutex after we try
to allocate 'tb'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19 16:49:39 -07:00
Matthias Schiffer
33be081a81 ipv6: ndisc: fix ndisc_send_redirect writing to the wrong skb
Since some refactoring in 5f5a011, ndisc_send_redirect called
ndisc_fill_redirect_hdr_option on the wrong skb, leading to data corruption or
in the worst case a panic when the skb_put failed.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17 22:59:12 -07:00
Joe Perches
fe2c6338fd net: Convert uses of typedef ctl_table to struct ctl_table
Reduce the uses of this unnecessary typedef.

Done via perl script:

$ git grep --name-only -w ctl_table net | \
  xargs perl -p -i -e '\
	sub trim { my ($local) = @_; $local =~ s/(^\s+|\s+$)//g; return $local; } \
        s/\b(?<!struct\s)ctl_table\b(\s*\*\s*|\s+\w+)/"struct ctl_table " . trim($1)/ge'

Reflow the modified lines that now exceed 80 columns.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13 02:36:09 -07:00
Wu Fengguang
a06a2d378d net: ping_check_bind_addr() etc. can be static
net/ipv4/ping.c:286:5: sparse: symbol 'ping_check_bind_addr' was not declared. Should it be static?
net/ipv4/ping.c:355:6: sparse: symbol 'ping_set_saddr' was not declared. Should it be static?
net/ipv4/ping.c:370:6: sparse: symbol 'ping_clear_saddr' was not declared. Should it be static?

net/ipv6/ping.c:60:5: sparse: symbol 'dummy_ipv6_recv_error' was not declared. Should it be static?
net/ipv6/ping.c:64:5: sparse: symbol 'dummy_ip6_datagram_recv_ctl' was not declared. Should it be static?
net/ipv6/ping.c:69:5: sparse: symbol 'dummy_icmpv6_err_convert' was not declared. Should it be static?
net/ipv6/ping.c:73:6: sparse: symbol 'dummy_ipv6_icmp_error' was not declared. Should it be static?
net/ipv6/ping.c:75:5: sparse: symbol 'dummy_ipv6_chk_addr' was not declared. Should it be static?
net/ipv6/ping.c:201:5: sparse: symbol 'ping_v6_seq_show' was not declared. Should it be static?

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13 01:36:41 -07:00
Eliezer Tamir
d30e383bb8 tcp: add low latency socket poll support.
Adds low latency socket poll support for TCP.
In tcp_v[46]_rcv() add a call to sk_mark_ll() to copy the napi_id
from the skb to the sk.
In tcp_recvmsg(), when there is no data in the socket we busy-poll.
This is a good example of how to add busy-poll support to more protocols.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Tested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-10 21:22:36 -07:00
Eliezer Tamir
a5b50476f7 udp: add low latency socket poll support
Add upport for busy-polling on UDP sockets.
In __udp[46]_lib_rcv add a call to sk_mark_ll() to copy the napi_id
from the skb into the sk.
This is done at the earliest possible moment, right after we identify
which socket this skb is for.
In __skb_recv_datagram When there is no data and the user
tries to read we busy poll.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Tested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-10 21:22:36 -07:00
David S. Miller
6bc19fb82d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Merge 'net' bug fixes into 'net-next' as we have patches
that will build on top of them.

This merge commit includes a change from Emil Goode
(emilgoode@gmail.com) that fixes a warning that would
have been introduced by this merge.  Specifically it
fixes the pingv6_ops method ipv6_chk_addr() to add a
"const" to the "struct net_device *dev" argument and
likewise update the dummy_ipv6_chk_addr() declaration.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05 16:37:30 -07:00
Gao feng
534c877928 ipv6: assign rt6_info to inet6_ifaddr in init_loopback
Commit 25fb6ca4ed
"net IPv6 : Fix broken IPv6 routing table after loopback down-up"
forgot to assign rt6_info to the inet6_ifaddr.
When disable the net device, the rt6_info which allocated
in init_loopback will not be destroied in __ipv6_ifa_notify.

This will trigger the waring message below
[23527.916091] unregister_netdevice: waiting for tap0 to become free. Usage count = 1

Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04 16:57:41 -07:00
Lorenzo Colitti
d862e54614 net: ipv6: Implement /proc/net/icmp6.
The format is based on /proc/net/icmp and /proc/net/{udp,raw}6.

Compiles and displays reasonable results with CONFIG_IPV6={n,m,y}
Couldn't figure out how to test without CONFIG_PROC_FS enabled.

Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04 12:56:14 -07:00
Lorenzo Colitti
17ef66afc0 net: ipv6: Unify {raw,udp}6_sock_seq_show.
udp6_sock_seq_show and raw6_sock_seq_show are identical, except
the UDP version displays ports and the raw version displays the
protocol. Refactor most of the code in these two functions into
a new common ip6_dgram_sock_seq_show function, in preparation
for using it to display ICMPv6 sockets as well.

Also reduce the indentation in parts of include/net/transp_v6.h
to improve readability.

Compiles and displays reasonable results with CONFIG_IPV6={n,m,y}

Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04 12:56:14 -07:00
Nicolas Dichtel
32b8a8e59c sit: add IPv4 over IPv4 support
This patch adds the support of IPv4 over Ipv4 for the module sit. The gain of
this feature is to be able to have 4in4 and 6in4 over the same interface
instead of having one interface for 6in4 and another for 4in4 even if
encapsulation addresses are the same.

To avoid conflicting with ipip module, sit IPv4 over IPv4 protocol is
registered with a smaller priority.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 17:19:05 -07:00
Pravin B Shelar
1e2bd517c1 udp6: Fix udp fragmentation for tunnel traffic.
udp6 over GRE tunnel does not work after to GRE tso changes. GRE
tso handler passes inner packet but keeps track of outer header
start in SKB_GSO_CB(skb)->mac_offset.  udp6 fragment need to
take care of outer header, which start at the mac_offset, while
adding fragment header.
This bug is introduced by commit 68c3316311 (GRE: Add TCP
segmentation offload for GRE).

Reported-by: Dmitry Kravkov <dkravkov@gmail.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Tested-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 17:06:07 -07:00
Nicolas Dichtel
fda3f402f4 snmp6: remove IPSTATS_MIB_CSUMERRORS
This stat is not relevant in IPv6, there is no checksum in IPv6 header.
Just leave a comment to explain the hole.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 16:26:49 -07:00
Simon Horman
29a3cad5c6 ipv6: Correct comparisons and calculations using skb->tail and skb-transport_header
This corrects an regression introduced by "net: Use 16bits for *_headers
fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In
that case skb->tail will be a pointer whereas skb->transport_header
will be an offset from head. This is corrected by using wrappers that
ensure that comparisons and calculations are always made using pointers.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28 23:49:07 -07:00
Cong Wang
75538c2b85 net: always pass struct netdev_notifier_info to netdevice notifiers
commit 351638e7de (net: pass info struct via netdevice notifier)
breaks booting of my KVM guest, this is due to we still forget to pass
struct netdev_notifier_info in several places. This patch completes it.

Cc: Jiri Pirko <jiri@resnulli.us>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28 21:58:54 -07:00
Jiri Pirko
351638e7de net: pass info struct via netdevice notifier
So far, only net_device * could be passed along with netdevice notifier
event. This patch provides a possibility to pass custom structure
able to provide info that event listener needs to know.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>

v2->v3: fix typo on simeth
	shortened dev_getter
	shortened notifier_info struct name
v1->v2: fix notifier_call parameter in call_netdevice_notifier()
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28 13:11:01 -07:00
Simon Horman
0d89d2035f MPLS: Add limited GSO support
In the case where a non-MPLS packet is received and an MPLS stack is
added it may well be the case that the original skb is GSO but the
NIC used for transmit does not support GSO of MPLS packets.

The aim of this code is to provide GSO in software for MPLS packets
whose skbs are GSO.

SKB Usage:

When an implementation adds an MPLS stack to a non-MPLS packet it should do
the following to skb metadata:

* Set skb->inner_protocol to the old non-MPLS ethertype of the packet.
  skb->inner_protocol is added by this patch.

* Set skb->protocol to the new MPLS ethertype of the packet.

* Set skb->network_header to correspond to the
  end of the L3 header, including the MPLS label stack.

I have posted a patch, "[PATCH v3.29] datapath: Add basic MPLS support to
kernel" which adds MPLS support to the kernel datapath of Open vSwtich.
That patch sets the above requirements in datapath/actions.c:push_mpls()
and was used to exercise this code.  The datapath patch is against the Open
vSwtich tree but it is intended that it be added to the Open vSwtich code
present in the mainline Linux kernel at some point.

Features:

I believe that the approach that I have taken is at least partially
consistent with the handling of other protocols.  Jesse, I understand that
you have some ideas here.  I am more than happy to change my implementation.

This patch adds dev->mpls_features which may be used by devices
to advertise features supported for MPLS packets.

A new NETIF_F_MPLS_GSO feature is added for devices which support
hardware MPLS GSO offload.  Currently no devices support this
and MPLS GSO always falls back to software.

Alternate Implementation:

One possible alternate implementation is to teach netif_skb_features()
and skb_network_protocol() about MPLS, in a similar way to their
understanding of VLANs. I believe this would avoid the need
for net/mpls/mpls_gso.c and in particular the calls to
__skb_push() and __skb_push() in mpls_gso_segment().

I have decided on the implementation in this patch as it should
not introduce any overhead in the case where mpls_gso is not compiled
into the kernel or inserted as a module.

MPLS GSO suggested by Jesse Gross.
Based in part on "v4 GRE: Add TCP segmentation offload for GRE"
by Pravin B Shelar.

Cc: Jesse Gross <jesse@nicira.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27 22:50:59 -07:00