snd-hda-intel driver used schedule_work() fot the delayed DMA pointer
updates, but this has several potential problems:
- it may block other eventsd works longer
- it may deadlock when probing fails and flush_scheduled_work() is
called during probe callback (as probe callback itself could be
invoked from eventd)
This patch adds an own workq for each driver instance to solve these
problems.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Intel DX58SO board works fine with model ALC883_3ST_6ch_INTEL.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the following lockdep warning by not reusing the hda_codec.spdif_mutex.
ALSA sound/pci/hda/hda_codec.c:882: hda_codec_cleanup_stream: NID=0x2
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.28-next-20090102 #33
-------------------------------------------------------
mplayer/3151 is trying to acquire lock:
(&pcm->open_mutex){--..}, at: [<ffffffffa004ced3>] snd_pcm_release+0x43/0xd0 [snd_pcm]
but task is already holding lock:
(&mm->mmap_sem){----}, at: [<ffffffff810c0252>] sys_munmap+0x42/0x80
which lock already depends on the new lock.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a patch which adds correct auto detection of model for
snd-hda-intel for Acer Aspire 5930G and 6930G. Tested on my 5930G. It
finally adds hp jack sense and 5.1 speaker system sliders.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix trivial name string typo as reported in bug 2552.
Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added functions to report jack sense.
As CXT5051_PORTB_EVENT has the same value as CONEXANT_MIC_EVENT two input
devices for the microphone will be created if using CXT5051.
Signed-off-by: Ulrich Dangel <uli@spamt.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move the more specific preset for ALC1200 above the general one for
ALC888, so that it will have the chance to get matched and selected.
Reported-by: Thomas Schneider <nailstudio@gmx.net>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add check to determine if dinput_mux is set by any of patch_stac*() functions,
otherwise a invalid pointer my be referenced causing gibberish to mixer values.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The capture with 44.1kHz on ca0106 seems to cause loud noises on
later playbacks, which doesn't support 44.1kHz. A simple fix is to
disable 44.1kHz, as the "default" PCM with dsnoop is anyway only with
48kHz.
Reference: Novell bnc#447624
https://bugzilla.novell.com/show_bug.cgi?id=447624
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When no jack detection is available, the pins should be always
turned on since it can't be turned on/off dynamically via unsol
events.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added probe_only module option to hd-audio driver.
This option specifies whether the driver creates and initializes the
codec-parser after probing. When this option is set, the driver skips
the codec parsing and initialization but gives you proc and other
accesses. It's useful to see the initial codec state for debugging.
The default of this value is off, so the default behavior is as same
as before.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the line_out has only one DAC and it's unique (i.e. not shared
by other outputs), assign a more reasonable and distinct mixer name
such as "Headphone" or "Speaker".
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current auto-configuration code has several problems especially
for the new IDT codecs, e.g. wrong assignment of pins and DACs or
coupled volume for speaker and headphone.
This patch is a fairly large rewrite of the auto-configuration code.
Some remaks
- mic_switch and line_switch contain NIDs instead of bool
- dac_list isn't fixed for IDT 92HD* codecs now, they are all probed
- extra HP and speakers are stored in extra_dacs[].
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous commit re-enabled hp_nid setup for IDT92HD73*, but
it's unneeded indeed for Dell laptops that have multiple headphones.
Setting the extra hp_nid results in a non-working "Headpohne" mixer
control. Thus hp_nid should be 0 for these dell models.
Also, the automatic addition of hp_nid should check whether it's
a dual-HP model or not. For dual-HPs, the pins are already checked
by the early workaround.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added "IEC958 PCM Stream" controls for the per-stream IEC958 status
bits. Using this instead of "IEC958 Default" is safer since the status
bits will be recovered to the default states after closing the PCM
stream.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixed the call of snd_ctl_add() by replacing with snd_hda_ctl_add()
so that this mixer element can be tracked for re-configuration.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
