Commit Graph

13 Commits

Author SHA1 Message Date
Tony Lindgren
741e3a89de omap: Use separate init_irq functions to avoid cpu_is_omap tests early
This allows us to remove cpu_is_omap calls from init_irq functions.
There should not be any need for cpu_is_omap calls as at this point.
During the timer init we only care about SoC generation, and not about
subrevisions.

The main reason for the patch is that we want to initialize only
minimal omap specific code from the init_early call.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-06-16 05:42:09 -07:00
Santosh Shilimkar
4bdb157749 ARM: 6755/1: omap4: l2x0: Populate set_debug() function and enable Errata 727915
Populate the l2x0 set_debug function pointer with OMAP secure call
and enable the PL310 Errata 727915

This patch has dependency on the earlier patch
ARM: l2x0: Errata fix for flush by Way operation can cause data
corruption

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-09 00:18:47 +00:00
Linus Torvalds
01539ba2a7 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits)
  omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  OMAP4: hwmod data: Fix alignment and end of line in structurefields
  OMAP4: hwmod data: Move the DMA structures
  OMAP4: hwmod data: Move the smartreflex structures
  OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc
  arm: omap: tusb6010: add name for MUSB IRQ
  arm: omap: craneboard: Add USB EHCI support
  omap2+: Initialize serial port for dynamic remuxing for n8x0
  omap2+: Add struct omap_board_data and use it for platform level serial init
  omap2+: Allow hwmod state changes to mux pads based on the state changes
  omap2+: Add support for hwmod specific muxing of devices
  omap2+: Add omap_mux_get_by_name
  OMAP2: PM: fix compile error when !CONFIG_SUSPEND
  MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership
  OMAP4: Smartreflex framework extensions
  OMAP4: hwmod: Add inital data for smartreflex modules.
  OMAP4: PM: Program correct init voltages for scalable VDDs
  OMAP4: Adding voltage driver support
  OMAP4: Register voltage PMIC parameters with the voltage layer
  OMAP3: PM: Program correct init voltages for VDD1 and VDD2
  ...

Fix up trivial conflict in arch/arm/plat-omap/Kconfig
2011-01-06 19:13:58 -08:00
Santosh Shilimkar
b89cd71a15 omap4: l2x0: Enable early BRESP bit
The AXI protocol specifies that the write response can only
be sent back to an AXI master when the last write data has been
accepted. This optimization enables the PL310 to send the write
response of certain write transactions as soon as the store buffer
accepts the write address. This behavior is not compatible with
the AXI protocol and is disabled by default. You enable this
optimization by setting the Early BRESP Enable bit in the
Auxiliary Control Register (bit [30]).

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Mans Rullgard <mans@mansr.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-18 09:33:01 -08:00
Santosh Shilimkar
b0f20ff9d7 omap4: l2x0: Set share override bit
Clearing bit 22 in the PL310 Auxiliary Control register (shared
attribute override enable) has the side effect of transforming Normal
Shared Non-cacheable reads into Cacheable no-allocate reads.

Coherent DMA buffers in Linux always have a Cacheable alias via the
kernel linear mapping and the processor can speculatively load cache
lines into the PL310 controller. With bit 22 cleared, Non-cacheable
reads would unexpectedly hit such cache lines leading to buffer
corruption

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-18 09:32:55 -08:00
Mans Rullgard
11e0264046 omap4: l2x0: enable instruction and data prefetching
Enabling L2 prefetching improves performance as shown on Panda
ES2.1 board with mem test, and it has measurable impact on
performances. I think we should consider it, even though it damages
"writes" a bit. (rebased to k.org)
Usually the prefetch is used at both levels together L1 + L2, however,
to enable the CP15 prefetch engines, these are under security, and on
GP devices, we cannot enable it(e.g. on PandaBoard). However, just
enabling PL310 prefetch seems to provide performance improvement,
as shown in the data below (from Ubuntu) and would be a great thing
to pull in.

What prefetch does is enable automatic next line prefetching. With this
enabled, whenever the PL310 receives a cachable read request, it
automatically prefetches the following cache line as well.

Measurement Data:
==
STOCK 10.10 WITHOUT PATCH

========================
~# ./memspeed
size    8388608 8192k 8M
offset  8388608, 0
buffers 0x2aaad000 0x2b2ad000
copy  libc          133 MB/s
copy  Android v5    273 MB/s
copy  Android NEON  235 MB/s
copy  INT32         116 MB/s
copy  ASM ARM       187 MB/s
copy  ASM VLDM 64   204 MB/s
copy  ASM VLDM 128  173 MB/s
copy  ASM VLD1      216 MB/s
read  ASM ARM       286 MB/s
read  ASM VLDM      242 MB/s
read  ASM VLD1      286 MB/s
write libc         1947 MB/s
write ASM ARM      1943 MB/s
write ASM VSTM     1942 MB/s
write ASM VST1     1935 MB/s

10.10 + PATCH
=============
~# ./memspeed
size    8388608 8192k 8M
offset  8388608, 0
buffers 0x2ab17000 0x2b317000
copy  libc          129 MB/s
copy  Android v5    256 MB/s
copy  Android NEON  356 MB/s
copy  INT32         127 MB/s
copy  ASM ARM       321 MB/s
copy  ASM VLDM 64   337 MB/s
copy  ASM VLDM 128  321 MB/s
copy  ASM VLD1      350 MB/s
read  ASM ARM       496 MB/s
read  ASM VLDM      470 MB/s
read  ASM VLD1      488 MB/s
write libc         1701 MB/s
write ASM ARM      1682 MB/s
write ASM VSTM     1693 MB/s
write ASM VST1     1681 MB/s

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-18 09:32:41 -08:00
Santosh Shilimkar
1773e60a81 omap4: l2x0: Construct the AUXCTRL value using defines
This patch removes the hardcoded value of auxctrl value and
construct it using bitfields

Bit 25 is reserved and is always set to 1. Same value
of this bit is retained in this patch

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-18 09:31:59 -08:00
Russell King
ff2e27ae0b ARM: GIC: consolidate gic_cpu_base_addr to common GIC code
Every architecture using the GIC has a gic_cpu_base_addr pointer for
GIC 0 for their entry assembly code to use to decode the cause of the
current interrupt.  Move this into the common GIC code.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-14 19:21:42 +00:00
Russell King
b580b899dd ARM: GIC: provide a single initialization function for boot CPU
Provide gic_init() which initializes the GIC distributor and current
CPU's GIC interface for the boot (or single) CPU.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-14 19:21:30 +00:00
Russell King
be6786ac73 Merge branch 'l2x0-pull-rmk' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into devel-stable 2010-10-28 14:42:06 +01:00
Santosh Shilimkar
4e803c40b3 omap4: l2x0: Override the default l2x0_disable
The machine_kexec() calls outer_disable which can crash on OMAP4
becasue of trustzone restrictions.

This patch overrides the default l2x0_disable with a OMAP4
specific implementation taking care of trustzone

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26 11:40:00 +05:30
Santosh Shilimkar
a777b7277e omap4: l2x0: Fix init parameter for es2.0
On ES2.0 the L2 cache init parameter ineeds to be changed to take
care of cache size. The cache size is 1MB on ES2.0 vs 512KB on ES1.0

This patch fixes the init parameter to update the same using
dynamic cpu version check

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-09-24 11:30:18 +05:30
Santosh Shilimkar
fbc9be106e omap4: Move SOC specific code from board file
This patch moves OMAP4 soc specific code from 4430sdp board file.
The change is necessary so that newer board support can be added
with minimal changes. This will be also problematic for
multi-board, multi-omap builds.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:17:51 -07:00