Commit Graph

3993 Commits

Author SHA1 Message Date
Linus Torvalds
2f39691f31 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer fixes from Dmitry Torokhov:
 "Second round of updates for the input subsystem.  Mostly small fixups
  to the code merged in the first round (atmel_mxt_ts, wacom) but also a
  smallish patch to xbox driver to support Xbox One controllers and a
  patch to better handle Synaptics profile sensors found in Cr-48
  Chromebooks that should not affect any other devices"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: edt-ft5x06 - remove superfluous assignment
  Input: xpad - add support for Xbox One controllers
  Input: atmel_mxt_ts - fix a few issues reported by Coverity
  Input: atmel_mxt_ts - split config update a bit
  Input: atmel_mxt_ts - simplify mxt_initialize a bit
  Input: joystick - use get_cycles on ARMv8
  Input: wacom - fix compiler warning if !CONFIG_PM
  Input: cap1106 - allow changing key mapping from userspace
  Input: synaptics - use firmware data for Cr-48
  Input: synaptics - properly initialize slots for semi-MT
  Input: MT - make slot cleanup callable outside mt_sync_frame()
  Input: atmel_mxt_ts - mXT224 DMA quirk was fixed in firmware v2.0.AA
2014-08-15 18:16:28 -06:00
Dmitry Torokhov
91167e1914 Merge branch 'next' into for-linus
Prepare second round of input updates for 3.17.
2014-08-14 23:02:58 -07:00
Maks Naumov
3361a97601 Input: edt-ft5x06 - remove superfluous assignment
Somehow we ended up with a duplicate line in edt_ft5x06_register_write()

Signed-off-by: Maks Naumov <maksqwe1@ukr.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-13 15:30:11 -07:00
Ted Mielczarek
1a48ff81b3 Input: xpad - add support for Xbox One controllers
Xbox One controllers require an initialization message to start sending
data, so xpad_init_output becomes a required function. The Xbox One
controller does not have LEDs like the Xbox 360 controller, so that
functionality is not implemented. The format of messages controlling rumble
is currently undocumented, so rumble support is not yet implemented.

Note that Xbox One controller advertises three interfaces with the same
interface class, subclass and protocol, so we have to also match against
interface number.

Signed-off-by: Ted Mielczarek <ted@mielczarek.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-13 10:30:01 -07:00
Dmitry Torokhov
041fa15951 Input: atmel_mxt_ts - fix a few issues reported by Coverity
This should fix the following issues reported by Coverity:

*** CID 1230625:  Logically dead code  (DEADCODE)
/drivers/input/touchscreen/atmel_mxt_ts.c: 1692 in mxt_initialize()

*** CID 1230627:  Missing break in switch  (MISSING_BREAK)
/drivers/input/touchscreen/atmel_mxt_ts.c: 1436 in mxt_get_object_table()

*** CID 1230629:  Out-of-bounds write  (OVERRUN)
/drivers/input/touchscreen/atmel_mxt_ts.c: 1267 in mxt_update_cfg()

*** CID 1230632:  Unused pointer value  (UNUSED_VALUE)
/drivers/input/touchscreen/atmel_mxt_ts.c: 1211 in mxt_update_cfg()

Acked-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-13 09:16:11 -07:00
Dmitry Torokhov
efdbd7ae44 Input: atmel_mxt_ts - split config update a bit
Let's split config update code a bit so it is hopefully a bit easier to
read. Also, the firmware update callback should be the entity releasing
firmware blob, not lower layers.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
2014-08-13 09:16:11 -07:00
Dmitry Torokhov
6cd1ab0fb6 Input: atmel_mxt_ts - simplify mxt_initialize a bit
I think having control flow with 2 goto/labels/flags is quite hard to read,
this version is a bit more readable IMO.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
2014-08-13 09:16:10 -07:00
Mark Brown
a6b48699ae Input: joystick - use get_cycles on ARMv8
As with ARM the ARMv8 architecture provides a cycle counter which can be
used to provide a high resolution time for the joystick driver and
silence the build warning that results from not having a precise timer
on ARMv8, making allmodconfig and allyesconfig quieter.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-12 09:59:40 -07:00
Linus Torvalds
664fb23070 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
 - big update to Wacom driver by Benjamin Tissoires, converting it to
   HID infrastructure and unifying USB and Bluetooth models
 - large update to ALPS driver by Hans de Goede, which adds support for
   newer touchpad models as well as cleans up and restructures the code
 - more changes to Atmel MXT driver, including device tree support
 - new driver for iPaq x3xxx touchscreen
 - driver for serial Wacom tablets
 - driver for Microchip's CAP1106
 - assorted cleanups and improvements to existing drover and input core

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits)
  Input: wacom - update the ABI doc according to latest changes
  Input: wacom - only register once the MODULE_* macros
  Input: HID - remove hid-wacom Bluetooth driver
  Input: wacom - add copyright note and bump version to 2.0
  Input: wacom - remove passing id for wacom_set_report
  Input: wacom - check for bluetooth protocol while setting OLEDs
  Input: wacom - handle Intuos 4 BT in wacom.ko
  Input: wacom - handle Graphire BT tablets in wacom.ko
  Input: wacom - prepare the driver to include BT devices
  Input: hyperv-keyboard - register as a wakeup source
  Input: imx_keypad - remove ifdef round PM methods
  Input: jornada720_ts - get rid of space indentation and use tab
  Input: jornada720_ts - switch to using managed resources
  Input: alps - Rushmore and v7 resolution support
  Input: mcs5000_ts - remove ifdef around power management methods
  Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP
  Input: ads7846 - release resources on failure for clean exit
  Input: wacom - add support for 0x12C ISDv4 sensor
  Input: atmel_mxt_ts - use deep sleep mode when stopped
  ARM: dts: am437x-gp-evm: Update binding for touchscreen size
  ...
2014-08-08 17:39:48 -07:00
Dmitry Torokhov
23526d9497 Input: cap1106 - allow changing key mapping from userspace
Wire up support for EVIOC{G|S}KEYCODE to allow users change key mappings
from userspace.

Reviewed-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-08 09:17:22 -07:00
Henrik Rydberg
e08d9afa93 Input: synaptics - use firmware data for Cr-48
The profile sensor clickpad in a Cr-48 Chromebook does a reasonable job
of tracking individual fingers. This tracking isn't perfect, but,
experiments show that it works better than just passing "semi-mt" data
to userspace, and making userspace try to deduce where the fingers are
given a bounding box.

This patch tries to report correct two-finger positions instead of the
{(min_x, min_y), (max_x, max_y)} for profile sensor clickpads on Cr-48
chromebooks. Note that this device's firmware always reports the higher
(smaller y) finger in the "sgm" packet, and the lower (larger y) finger
in the "agm" packet. Thus, when a new finger arrives on the pad, the
kernel driver uses input core's contact tracking facilities to match
contacts with slots.

Inspired by patch by Daniel Kurtz <djkurtz@chromium.org> and Chung-yih
Wang <cywang@chromium.org>

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-08 09:17:01 -07:00
Dmitry Torokhov
ae84197f8a Input: synaptics - properly initialize slots for semi-MT
Semi-MT devices are pointers too, so let's tell that to
input_mt_init_slots(), as well as let it set up the devices as semi-MT,
instead of us doing it manually.

Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07 23:37:08 -07:00
Henrik Rydberg
f8ec894945 Input: MT - make slot cleanup callable outside mt_sync_frame()
Some semi-mt drivers use the slots in a manual way, but may still
want to call parts of the frame synchronization logic. This patch
makes input_mt_drop_unused callable from those drivers.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07 23:37:07 -07:00
Nick Dyer
437d4f3797 Input: atmel_mxt_ts - mXT224 DMA quirk was fixed in firmware v2.0.AA
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07 23:36:32 -07:00
Linus Torvalds
43c40df2c7 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED updates from Bryan Wu:
 "This cycle we got:
   - a fix of attribute-creation race for the whole leds subsystem
   - new drivers (HID:GT683R, leds-ipaq-micro)
   - other fixing and clean up"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (23 commits)
  leds: ipaq-micro: fix sparse non static symbol warning
  leds: add driver for the iPAQ micro
  Documentation: dts: tcs6507: Fix wrong statement about #gpio-cells
  leds: convert blink timer to workqueue
  leds:pca963x: Update for PCA9635 and correct statement about MODE2 OUTDRV default
  leds:pca963x: Always initialize MODE2 register
  leds:pca963x: Add support for PCA9635 LED driver chip
  HID: gt683r: move mode attribute to led-class devices
  HID: gt683r: fix race condition
  HID: add support for MSI GT683R led panels
  leds: lp55xx-common: fix attribute-creation race
  leds: lp55xx-common: fix sysfs entry leak
  input: lm8323: fix attribute-creation race
  leds: wm831x-status: fix attribute-creation race
  leds: ss4200: fix attribute-creation race
  leds: ns2: fix attribute-creation race
  leds: netxbig: fix attribute-creation race
  leds: max8997: fix attribute-creation race
  leds: lm3642: fix attribute-creation race
  leds: lm355x: fix attribute-creation race
  ...
2014-08-07 17:25:10 -07:00
Linus Torvalds
54c72d5987 == Changes to existing drivers ==
- Checkpatch fixes throughout the subsystem
   - Use Regmap to handle IRQs in max77686, extcon-max77693 and mc13xxx-core
   - Use DMA in rtsx_pcr
   - Restrict building on unsupported architectures on timberdale, cs5535
   - SPI hardening in cros_ec_spi
   - More robust error handing in asic3, cros_ec, ab8500-debugfs,
         max77686 and pcf50633-core
   - Reorder PM runtime and regulator handing during shutdown in arizona
   - Enable wakeup in cros_ec_spi
   - Unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld,
         tps65912-spi, wm5110-tables and ab8500-debugfs
   - Add regulator handing into suspend() in sec-core
   - Remove pointless wrapper functions in extcon-max77693 and i2c-cros-ec-tunnel
   - Use cross-architecture friendly data sizes in stmpe-i2c, arizona,
         max77686 and tps65910
   - Device Tree documentation updates throughout
   - Provide power management support in max77686
   - Few OF clean-ups in max77686
   - Use manged resources in tps6105x
 
  == New drivers/supported devices ==
   - Add support for s2mpu02 to sec-core
   - Add support for Allwinner A32 to sun6i-prcm
   - Add support for Maxim 77802 in max77686
   - Add support for DA9063 AD in da9063
   - Add new driver for Intel PMICs (generic) and specifically Crystal Cove
 
  == (Re-)moved drivers ==
   - Move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT40p7AAoJEFGvii+H/HdhTo0P/1GuZyvCAJCeqt2oN1gcloIe
 Hgf5rEo/PVPh3T9vHA7GCbWhgtdxfJI8FxrQYvU7Dw5cEMlmvl5p/ZHNPIProv97
 uI59JO67roLpXZP+aYX8BzXcplYkaR/ah16o/ePtaOCwGrXDz+TtJiHEVVN/8bAG
 PWsdcDNBC8byP7BZ/8zFdu6pX4800eRZ0KgeBH+u4k6UDor7M6LkQrxF1hJhU1Bv
 z14Q2wKQufhbcyEtQWcYc6M8hignD1Ioyd4I8mnEJs0EUiABfGUEk/K/G4Z5Q7Sv
 eRIEPZCd1CEBKD5JQcPXyE1QGdG9GiD15PLmctPA4VY1V+9c5/Hoq0TLoxlAQNWA
 gUr7WSqJ+KT2Nch0WVr/MdP8l0jPYfboWbsd/apj4GK0/9quwJNkGUxx0mCdCXyg
 9ylitwUrmlrd4CEKjybfEuTQB52Jvcdq24fnNYHHn1TGppZH6w7LVvdwSW7UcjF0
 Y48hTImYYnVAlWl5lE5xVQTWD/3hseAcoWTsdSORSWJbkCfAhJUg/Gn5bH/Fkwhs
 /aWYPvkF+m47PoudZ9Z8qB5OTO4uz/Q9uEBBf2/k4Yy95vl2IZdy9VqS5tYG67e7
 LLdAZvG5hjEwDi3OwcwGSdZ/kRB5Hgq/YvpqjItle86CKj0ECdAqL/PfqLISgJq9
 x3zSuWMRLcNoyhc2HnBj
 =2cNI
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD update from Lee Jones:
 "Changes to existing drivers:
   - checkpatch fixes throughout the subsystem
   - use Regmap to handle IRQs in max77686, extcon-max77693 and
     mc13xxx-core
   - use DMA in rtsx_pcr
   - restrict building on unsupported architectures on timberdale,
     cs5535
   - SPI hardening in cros_ec_spi
   - more robust error handing in asic3, cros_ec, ab8500-debugfs,
     max77686 and pcf50633-core
   - reorder PM runtime and regulator handing during shutdown in arizona
   - enable wakeup in cros_ec_spi
   - unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld,
     tps65912-spi, wm5110-tables and ab8500-debugfs
   - add regulator handing into suspend() in sec-core
   - remove pointless wrapper functions in extcon-max77693 and
     i2c-cros-ec-tunnel
   - use cross-architecture friendly data sizes in stmpe-i2c, arizona,
     max77686 and tps65910
   - devicetree documentation updates throughout
   - provide power management support in max77686
   - few OF clean-ups in max77686
   - use manged resources in tps6105x

  New drivers/supported devices:
   - add support for s2mpu02 to sec-core
   - add support for Allwinner A32 to sun6i-prcm
   - add support for Maxim 77802 in max77686
   - add support for DA9063 AD in da9063
   - new driver for Intel PMICs (generic) and specifically Crystal Cove

  (Re-)moved drivers ==
   - move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb"

* tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (101 commits)
  MAINTAINERS: Update MFD repo location
  mfd: omap-usb-host: Fix improper mask use.
  mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested it
  mfd: arizona: Add missing handling for ISRC3 under/overclocked
  mfd: wm5110: Add new interrupt register definitions
  mfd: arizona: Rename thermal shutdown interrupt
  mfd: wm5110: Add in the output done interrupts
  mfd: wm5110: Remove non-existant interrupts
  mfd: tps65912-spi: Remove unused variable
  mfd: htc-i2cpld: Remove unused code
  mfd: da9063: Add support for AD silicon variant
  mfd: arizona: Map MICVDD from extcon device to the Arizona core
  mfd: arizona: Add MICVDD to mapped regulators for wm8997
  mfd: max77686: Ensure device type IDs are architecture agnostic
  mfd: max77686: Add Maxim 77802 PMIC support
  mfd: tps6105x: Use managed resources when allocating memory
  mfd: wm8997-tables: Suppress 'line over 80 chars' warnings
  mfd: kempld-core: Correct a variety of checkpatch warnings
  mfd: ipaq-micro: Fix coding style errors/warnings reported by checkpatch
  mfd: si476x-cmd: Remedy checkpatch style complains
  ...
2014-08-07 17:17:39 -07:00
Dmitry Torokhov
5e2aa2ed08 Merge branch 'next' into for-linus
Prepare first round of input updates for 3.17.
2014-08-06 23:36:12 -07:00
Dmitry Torokhov
fc8104bc5a Merge branch 'wacom' into next
Merge large update to Wacom driver, converting it from USB to a HID
driver and unifying wired and bluetooth support, from Benjamin
Tissoires.
2014-08-06 23:31:48 -07:00
Dexuan Cui
62238f3aad Input: hyperv-keyboard - register as a wakeup source
With this patch, we can press a key to wake up the VM after the VM executes
"echo freeze > /sys/power/state".

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06 14:10:06 -07:00
Linus Torvalds
049711bf3c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next
Pull sparc updates from David Miller:

 1) Add sparc RAM output to /proc/iomem, from Bob Picco.

 2) Allow seeks on /dev/mdesc, from Khalid Aziz.

 3) Cleanup sparc64 I/O accessors, from Sam Ravnborg.

 4) If update_mmu_cache{,_pmd}() is called with an not-valid mapping, do
    not insert it into the TLB miss hash tables otherwise we'll
    livelock.  Based upon work by Christopher Alexander Tobias Schulze.

 5) Fix BREAK detection in sunsab driver when no actual characters are
    pending, from Christopher Alexander Tobias Schulze.

 6) Because we have modules --> openfirmware --> vmalloc ordering of
    virtual memory, the lazy VMAP TLB flusher can cons up an invocation
    of flush_tlb_kernel_range() that covers the openfirmware address
    range.  Unfortunately this will flush out the firmware's locked TLB
    mapping which causes all kinds of trouble.  Just split up the flush
    request if this happens, but in the long term the lazy VMAP flusher
    should probably be made a little bit smarter.

    Based upon work by Christopher Alexander Tobias Schulze.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
  sparc64: Fix up merge thinko.
  sparc: Add "install" target
  arch/sparc/math-emu/math_32.c: drop stray break operator
  sparc64: ldc_connect() should not return EINVAL when handshake is in progress.
  sparc64: Guard against flushing openfirmware mappings.
  sunsab: Fix detection of BREAK on sunsab serial console
  bbc-i2c: Fix BBC I2C envctrl on SunBlade 2000
  sparc64: Do not insert non-valid PTEs into the TSB hash table.
  sparc64: avoid code duplication in io_64.h
  sparc64: reorder functions in io_64.h
  sparc64: drop unused SLOW_DOWN_IO definitions
  sparc64: remove macro indirection in io_64.h
  sparc64: update IO access functions in PeeCeeI
  sparcspkr: use sbus_*() primitives for IO
  sparc: Add support for seek and shorter read to /dev/mdesc
  sparc: use %s for unaligned panic
  drivers/sbus/char: Micro-optimization in display7seg.c
  display7seg: Introduce the use of the managed version of kzalloc
  sparc64 - add mem to iomem resource
2014-08-06 09:41:23 -07:00
David S. Miller
e9011d0866 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Conflicts:
	arch/sparc/mm/init_64.c

Conflict was simple non-overlapping additions.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05 18:57:18 -07:00
Linus Torvalds
e7fda6c4c3 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer and time updates from Thomas Gleixner:
 "A rather large update of timers, timekeeping & co

   - Core timekeeping code is year-2038 safe now for 32bit machines.
     Now we just need to fix all in kernel users and the gazillion of
     user space interfaces which rely on timespec/timeval :)

   - Better cache layout for the timekeeping internal data structures.

   - Proper nanosecond based interfaces for in kernel users.

   - Tree wide cleanup of code which wants nanoseconds but does hoops
     and loops to convert back and forth from timespecs.  Some of it
     definitely belongs into the ugly code museum.

   - Consolidation of the timekeeping interface zoo.

   - A fast NMI safe accessor to clock monotonic for tracing.  This is a
     long standing request to support correlated user/kernel space
     traces.  With proper NTP frequency correction it's also suitable
     for correlation of traces accross separate machines.

   - Checkpoint/restart support for timerfd.

   - A few NOHZ[_FULL] improvements in the [hr]timer code.

   - Code move from kernel to kernel/time of all time* related code.

   - New clocksource/event drivers from the ARM universe.  I'm really
     impressed that despite an architected timer in the newer chips SoC
     manufacturers insist on inventing new and differently broken SoC
     specific timers.

[ Ed. "Impressed"? I don't think that word means what you think it means ]

   - Another round of code move from arch to drivers.  Looks like most
     of the legacy mess in ARM regarding timers is sorted out except for
     a few obnoxious strongholds.

   - The usual updates and fixlets all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
  timekeeping: Fixup typo in update_vsyscall_old definition
  clocksource: document some basic timekeeping concepts
  timekeeping: Use cached ntp_tick_length when accumulating error
  timekeeping: Rework frequency adjustments to work better w/ nohz
  timekeeping: Minor fixup for timespec64->timespec assignment
  ftrace: Provide trace clocks monotonic
  timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC
  seqcount: Add raw_write_seqcount_latch()
  seqcount: Provide raw_read_seqcount()
  timekeeping: Use tk_read_base as argument for timekeeping_get_ns()
  timekeeping: Create struct tk_read_base and use it in struct timekeeper
  timekeeping: Restructure the timekeeper some more
  clocksource: Get rid of cycle_last
  clocksource: Move cycle_last validation to core code
  clocksource: Make delta calculation a function
  wireless: ath9k: Get rid of timespec conversions
  drm: vmwgfx: Use nsec based interfaces
  drm: i915: Use nsec based interfaces
  timekeeping: Provide ktime_get_raw()
  hangcheck-timer: Use ktime_get_ns()
  ...
2014-08-05 17:46:42 -07:00
Fabio Estevam
e179d5fa8d Input: imx_keypad - remove ifdef round PM methods
We can annotate the suspend/resume functions with '__maybe_unused' and get
rid of the ifdef, which makes the code smaller and simpler.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-31 11:59:34 -07:00
Pramod Gurav
fe96244b6e Input: jornada720_ts - get rid of space indentation and use tab
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-31 11:59:30 -07:00
Pramod Gurav
4b080e3b2f Input: jornada720_ts - switch to using managed resources
This switches the driver to using managed resources to simplify error
handling and to do away with remove function.

Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-31 11:58:47 -07:00
Hans de Goede
f3f33c6776 Input: alps - Rushmore and v7 resolution support
Add support for querying the physical size from the touchpad for Rushmore
and v7 touchpads, and use that to tell userspace the device resolution.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30 22:53:20 -07:00
Fabio Estevam
9634c152aa Input: mcs5000_ts - remove ifdef around power management methods
We can annonate the suspend/resume functions with '__maybe_unused' and get
rid of the ifdef, which makes the code smaller and simpler.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30 22:52:56 -07:00
Fabio Estevam
f1e31b02b9 Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP
When a kernel has CONFIG_PM=y and CONFIG_PM_SLEEP=n the following warnings are
seen:
drivers/input/touchscreen/mcs5000_ts.c:252:12: warning: 'mcs5000_ts_suspend' defined but not used [-Wunused-function]
 static int mcs5000_ts_suspend(struct device *dev)
            ^
drivers/input/touchscreen/mcs5000_ts.c:262:12: warning: 'mcs5000_ts_resume' defined but not used [-Wunused-function]
 static int mcs5000_ts_resume(struct device *dev)

Protect the suspend/resume functions with CONFIG_PM_SLEEP in order to fix these
build warnings.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30 22:52:55 -07:00
Pramod Gurav
a1cd3fd09a Input: ads7846 - release resources on failure for clean exit
Input device must be released(input_free_device) when ads7846_probe_dt
fails. This fixes the same by releasing resources on failure.

Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30 22:52:09 -07:00
Nick Dyer
9d469d033d Input: atmel_mxt_ts - use deep sleep mode when stopped
By writing zero to both the active and idle cycle times the maXTouch device
is put into a deep sleep mode when it consumes minimal power. It is
unnecessary to change the configuration of any other objects (for example
to disable T9 touchscreen).

It is counterproductive to reset the chip on resume, it will result in a
long delay. However it is necessary to issue a calibrate command after the
chip has spent any time in deep sleep.

This patch also deals with the situation where the power configuration is
zero on probe, which would mean that the device never wakes up to execute
commands.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28 10:26:29 -07:00
Roger Quadros
a4054596e9 Input: pixcir_i2c_ts - add device tree support
Provide device tree support and binding information.  Also provide support
for a new chip "pixcir_tangoc".

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28 10:26:18 -07:00
Roger Quadros
36874c7e21 Input: pixcir_i2c_ts - support up to 5 fingers and hardware tracking IDs
Some variants of the Pixcir touch controller support up to 5 simultaneous
fingers and hardware tracking IDs. Prepare the driver for that.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28 10:26:18 -07:00
Roger Quadros
62e65b7e85 Input: pixcir_i2c_ts - use Type-B Multi-Touch protocol
Switch to using the Type-B Multi-Touch protocol.

Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28 10:26:17 -07:00
Yunkang Tang
3808843cf1 Input: alps - add support for v7 devices
Such as found on the new Toshiba Portégé Z30-A and Z40-A.

Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com>
[hdegoede@redhat.com: Remove softbutton handling, this is done in userspace]
[hdegoede@redhat.com: Report INPUT_PROP_BUTTONPAD]
[hdegoede@redhat.com: Do not report fake PRESSURE, reporting BTN_TOUCH is
 enough]
[hdegoede@redhat.com: Various cleanups / refactoring]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:20 -07:00
Hans de Goede
c0cd17f6dc Input: alps - cache firmware version
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:19 -07:00
Hans de Goede
38c11eaaab Input: alps - change decode function prototype to return an int
So that decode functions can return a failure when appropriate.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:18 -07:00
Hans de Goede
99d9996c5c Input: alps - report 2 touches when we've > 2 fingers
If we detect more then 2 fingers report 2 touches, rather then only
reporting the upper left corner of the bounding box.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:18 -07:00
Hans de Goede
68c2187017 Input: alps - add an alps_report_semi_mt_data function
Move all the semi-mt specific handling shared between the v3 and v4
handling code to a common helper function.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:17 -07:00
Hans de Goede
c38a448a23 Input: alps - use single touch data when v3 mt data contains only one finger
For v3 protocol devices, use the more accurate single touch data when the
mt data contains only one finger. Note the mt data reporting a finger count
of 1 should never happen, but better safe then sorry.

This brings the v3 bitmap handling in line with what the v4 code does,
allowing to factor out the common bits into a helper function.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:17 -07:00
Hans de Goede
cdf333efdc Input: alps - use standard contact tracking instead of DIY
When there are 2 fingers on the pad we don't know which one is which, so
use input_mt_assign_slots to make sure the right set of coordinates ends
up in the right slot.

Besides ensuring things end up in the right slot, this also results in a
nice cleanup, since sync_frame also handles non mt position and btn_touch
reporting.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:16 -07:00
Hans de Goede
02d04254a5 Input: alps - use struct input_mt_pos to track coordinates
This is a preparation patch for switching the DIY mt handling to using
input_mt_assign_slots && input_mt_sync_frame.

struct alps_fields is quite large, so while making changes to almost all uses
of it lets put it in our priv data instead of on the stack.

Having it in our priv data also allows using it directly for storing values
which need to be cached, rather then having separate x, y, z, fingers, etc.
copies in our priv data.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:16 -07:00
Hans de Goede
28835f4540 Input: alps - process_bitmap: round down when spreading adjescent fingers over 2 points
This fixes 2 fingers at the same height or width on the touchpad getting
reported at different y / x coordinates.

Note num_bits is always at least 1.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:15 -07:00
Hans de Goede
105affbfd5 Input: alps - process_bitmap: fix counting of high point bits
alps_process_bitmap was resetting the point bit-count as soon as it saw
2 0 bits in a row. This means that unless the high point actually is at
the end of the bitmap, it would always get its num_bits set to 0.

Instead reset num_bits to 0 on a 0->1 transition, so that with > 2 fingers
we only count the number of bits occupied by the highest finger.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:15 -07:00
Hans de Goede
036e6c7b54 Input: alps - process_bitmap: add alps_get_bitmap_points() helper function
Factor out the identical code for getting the bitmap points for x and y into
a helper function.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:14 -07:00
Hans de Goede
40e8f53bff Input: alps - process_bitmap: don't invert the Y-axis on Rushmore
Rushmore models don't have the Y-axis data in the bitmap inverted. Since
we now have 2 different Y orientations, make the Y bitmap data processing
use a forward loop like the X bitmap data processing, unifying the 2,
and invert the data later, except on Rushmore.

So far no-one has noticed this because the synaptics driver only uses the
non mt coordinates (except on clickpads, and there are no alps clickpads
using process_bitmap).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:13 -07:00
Hans de Goede
20bea68bd1 Input: alps - improve 2-finger reporting on v3 models
V3 models only report mt bitmap data when there are 2 or more fingers on
the touchpad. So always generate 2 positions in alps_process_bitmap, and
for v3 models only fall back to st data when there was no mt data in a
mt packet (which should never happen).

This fixes 2 finger scrolling not working when using 2 fingers close to
each other.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:13 -07:00
Yunkang Tang
f105e34a4e Input: alps - fix rushmore packet decoding
Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26 14:03:12 -07:00
Pramod Gurav
91cf07cdae Input: soc_button_array - add missing memory allocation check
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25 18:58:41 -07:00
Benjamin Tissoires
471d17148c Input: wacom - move the USB (now hid) Wacom driver in drivers/hid
wacom.ko is now a full HID driver, we have to move it into the proper
subdirectory: drivers/hid.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25 18:55:38 -07:00
Benjamin Tissoires
a3e6f6543d Input: wacom - keep wacom_ids ordered
No Functional changes, just some reordering.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Jason Gerecke <killertofu@gmail.com>
Tested-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25 18:53:56 -07:00