Commit Graph

163 Commits

Author SHA1 Message Date
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds
03e4970c10 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (39 commits)
  Treat writes as new when holes span across page boundaries
  fs,ocfs2: Move o2net_get_func_run_time under CONFIG_OCFS2_FS_STATS.
  ocfs2/dlm: Move kmalloc() outside the spinlock
  ocfs2: Make the left masklogs compat.
  ocfs2: Remove masklog ML_AIO.
  ocfs2: Remove masklog ML_UPTODATE.
  ocfs2: Remove masklog ML_BH_IO.
  ocfs2: Remove masklog ML_JOURNAL.
  ocfs2: Remove masklog ML_EXPORT.
  ocfs2: Remove masklog ML_DCACHE.
  ocfs2: Remove masklog ML_NAMEI.
  ocfs2: Remove mlog(0) from fs/ocfs2/dir.c
  ocfs2: remove NAMEI from symlink.c
  ocfs2: Remove masklog ML_QUOTA.
  ocfs2: Remove mlog(0) from quota_local.c.
  ocfs2: Remove masklog ML_RESERVATIONS.
  ocfs2: Remove masklog ML_XATTR.
  ocfs2: Remove masklog ML_SUPER.
  ocfs2: Remove mlog(0) from fs/ocfs2/heartbeat.c
  ocfs2: Remove mlog(0) from fs/ocfs2/slot_map.c
  ...

Fix up trivial conflict in fs/ocfs2/super.c
2011-03-28 13:03:31 -07:00
Tao Ma
402b418311 ocfs2: Remove masklog ML_XATTR.
Remove mlog(0) from fs/ocfs2/xattr.c and the masklog ML_XATTR.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-23 22:01:17 +08:00
Tao Ma
c1e8d35ef5 ocfs2: Remove EXIT from masklog.
mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
   Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
   mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07 16:43:21 +08:00
Tao Ma
ef6b689b63 ocfs2: Remove ENTRY from masklog.
ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-21 11:10:44 +08:00
Eric Paris
2a7dba391e fs/vfs/security: pass last path component to LSM on inode creation
SELinux would like to implement a new labeling behavior of newly created
inodes.  We currently label new inodes based on the parent and the creating
process.  This new behavior would also take into account the name of the
new object when deciding the new label.  This is not the (supposed) full path,
just the last component of the path.

This is very useful because creating /etc/shadow is different than creating
/etc/passwd but the kernel hooks are unable to differentiate these
operations.  We currently require that userspace realize it is doing some
difficult operation like that and than userspace jumps through SELinux hoops
to get things set up correctly.  This patch does not implement new
behavior, that is obviously contained in a seperate SELinux patch, but it
does pass the needed name down to the correct LSM hook.  If no such name
exists it is fine to pass NULL.

Signed-off-by: Eric Paris <eparis@redhat.com>
2011-02-01 11:12:29 -05:00
Jeff Liu
2decd65a26 ocfs2: Avoid to evaluate xattr block flags again.
It was evaludated to indexed before, check it is ok i think.

Signed-off-by: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-10-15 13:03:43 -07:00
Tao Ma
5e64b0d9e8 ocfs2/lockdep: Move ip_xattr_sem out of ocfs2_xattr_get_nolock.
As the name shows, we shouldn't have any lock in
ocfs2_xattr_get_nolock. so lift ip_xattr_sem to the caller.
This should be safe for us since the only 2 callers are:
1. ocfs2_xattr_get which will lock the resources.
2. ocfs2_mknod which don't need this locking.

And this also resolves the following lockdep warning.

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.35+ #5
-------------------------------------------------------
reflink/30027 is trying to acquire lock:
 (&oi->ip_alloc_sem){+.+.+.}, at: [<ffffffffa0673b67>] ocfs2_reflink_ioctl+0x69a/0x1226 [ocfs2]

but task is already holding lock:
 (&oi->ip_xattr_sem){++++..}, at: [<ffffffffa0673b58>] ocfs2_reflink_ioctl+0x68b/0x1226 [ocfs2]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&oi->ip_xattr_sem){++++..}:
       [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
       [<ffffffff82065a81>] lock_acquire+0xc6/0xed
       [<ffffffff82339650>] down_read+0x34/0x47
       [<ffffffffa0691cb8>] ocfs2_xattr_get_nolock+0xa0/0x4e6 [ocfs2]
       [<ffffffffa069d64f>] ocfs2_get_acl_nolock+0x5c/0x132 [ocfs2]
       [<ffffffffa069d9c7>] ocfs2_init_acl+0x60/0x243 [ocfs2]
       [<ffffffffa066499d>] ocfs2_mknod+0xae8/0xfea [ocfs2]
       [<ffffffffa0665041>] ocfs2_create+0x9d/0x105 [ocfs2]
       [<ffffffff820e1c83>] vfs_create+0x9b/0xf4
       [<ffffffff820e20bb>] do_last+0x2fd/0x5be
       [<ffffffff820e31c0>] do_filp_open+0x1fb/0x572
       [<ffffffff820d6cf6>] do_sys_open+0x5a/0xe7
       [<ffffffff820d6dac>] sys_open+0x1b/0x1d
       [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b

-> #2 (jbd2_handle){+.+...}:
       [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
       [<ffffffff82065a81>] lock_acquire+0xc6/0xed
       [<ffffffffa0604ff8>] start_this_handle+0x4a3/0x4bc [jbd2]
       [<ffffffffa06051d6>] jbd2__journal_start+0xba/0xee [jbd2]
       [<ffffffffa0605218>] jbd2_journal_start+0xe/0x10 [jbd2]
       [<ffffffffa065ca34>] ocfs2_start_trans+0xb7/0x19b [ocfs2]
       [<ffffffffa06645f3>] ocfs2_mknod+0x73e/0xfea [ocfs2]
       [<ffffffffa0665041>] ocfs2_create+0x9d/0x105 [ocfs2]
       [<ffffffff820e1c83>] vfs_create+0x9b/0xf4
       [<ffffffff820e20bb>] do_last+0x2fd/0x5be
       [<ffffffff820e31c0>] do_filp_open+0x1fb/0x572
       [<ffffffff820d6cf6>] do_sys_open+0x5a/0xe7
       [<ffffffff820d6dac>] sys_open+0x1b/0x1d
       [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b

-> #1 (&journal->j_trans_barrier){.+.+..}:
       [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
       [<ffffffff82064fa9>] lock_release_non_nested+0x1e5/0x24b
       [<ffffffff82065999>] lock_release+0x158/0x17a
       [<ffffffff823389f6>] __mutex_unlock_slowpath+0xbf/0x11b
       [<ffffffff82338a5b>] mutex_unlock+0x9/0xb
       [<ffffffffa0679673>] ocfs2_free_ac_resource+0x31/0x67 [ocfs2]
       [<ffffffffa067c6bc>] ocfs2_free_alloc_context+0x11/0x1d [ocfs2]
       [<ffffffffa0633de0>] ocfs2_write_begin_nolock+0x141e/0x159b [ocfs2]
       [<ffffffffa0635523>] ocfs2_write_begin+0x11e/0x1e7 [ocfs2]
       [<ffffffff820a1297>] generic_file_buffered_write+0x10c/0x210
       [<ffffffffa0653624>] ocfs2_file_aio_write+0x4cc/0x6d3 [ocfs2]
       [<ffffffff820d822d>] do_sync_write+0xc2/0x106
       [<ffffffff820d897b>] vfs_write+0xae/0x131
       [<ffffffff820d8e55>] sys_write+0x47/0x6f
       [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b

-> #0 (&oi->ip_alloc_sem){+.+.+.}:
       [<ffffffff82063f92>] validate_chain+0x727/0xd68
       [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
       [<ffffffff82065a81>] lock_acquire+0xc6/0xed
       [<ffffffff82339694>] down_write+0x31/0x52
       [<ffffffffa0673b67>] ocfs2_reflink_ioctl+0x69a/0x1226 [ocfs2]
       [<ffffffffa06599f6>] ocfs2_ioctl+0x61a/0x656 [ocfs2]
       [<ffffffff820e53ac>] vfs_ioctl+0x2a/0x9d
       [<ffffffff820e5903>] do_vfs_ioctl+0x45d/0x4ae
       [<ffffffff820e59ab>] sys_ioctl+0x57/0x7a
       [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-10 09:19:05 -07:00
Tao Ma
121a39bb00 ocfs2: Make xattr reflink work with new local alloc reservation.
The new reservation code in local alloc has add the limitation
that the caller should handle the case that the local alloc
doesn't give use enough contiguous clusters. It make the old
xattr reflink code broken.

So this patch udpate the xattr reflink code so that it can
handle the case that local alloc give us one cluster at a time.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-07-12 13:57:50 -07:00
Tao Ma
a78f9f4668 ocfs2: make xattr extension work with new local alloc reservation.
The old ocfs2_xattr_extent_allocation is too optimistic about
the clusters we can get. So actually if the file system is
too fragmented, ocfs2_add_clusters_in_btree will return us
with EGAIN and we need to allocate clusters once again.

So this patch change it to a while loop so that we can allocate
clusters until we reach clusters_to_add.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: stable@kernel.org
2010-07-12 13:57:24 -07:00
Stephen Hemminger
537d81ca7c ocfs: constify xattr_handler
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:20 -04:00
Tao Ma
5f5261acb0 ocfs2: Don't retry xattr set in case value extension fails.
In normal xattr set, the set sequence is inode, xattr block
and finally xattr bucket if we meet with a ENOSPC. But there
is a corner case.
So consider we will set a xattr whose value will be stored in
a cluster, and there is no xattr block by now. So we will
reserve 1 xattr block and 1 cluster for setting it. Now if we
fail in value extension(in case the volume is almost full and
we can't allocate the cluster because the check in
ocfs2_test_bg_bit_allocatable), ENOSPC will be returned. So
we will try to create a bucket(this time there is a chance that
the reserved cluster will be used), and when we try value extension
again, kernel bug happens. We did meet with it. Check the bug below.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1251

This patch just try to avoid this by adding a set_abort in
ocfs2_xattr_set_ctxt, so in case ENOSPC happens in value extension,
we will check whether it is caused by the real ENOSPC or just the
full of inode or xattr block. If it is the first case, we set set_abort
so that we don't try any further. we are safe to exit directly here
ince it is really ENOSPC.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-18 16:41:39 -07:00
Tao Ma
d5a7df0649 ocfs2: Reset xattr value size after xa_cleanup_value_truncate().
In ocfs2_prepare_xattr_entry, if we fail to grow an existing value,
xa_cleanup_value_truncate() will leave the old entry in place.  Thus, we
reset its value size.  However, if we were allocating a new value, we
must not reset the value size or we will BUG().  This resolves
oss.oracle.com bug 1247.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-18 16:41:21 -07:00
Tao Ma
74380c479a ocfs2: Free block to the right block group.
In case the block we are going to free is allocated from
a discontiguous block group, we have to use suballoc_loc
to be the right group.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-03-22 14:20:18 +08:00
Joel Becker
2b6cb576aa ocfs2: Set suballoc_loc on allocated metadata.
Get the suballoc_loc from ocfs2_claim_new_inode() or
ocfs2_claim_metadata().  Store it on the appropriate field of the block
we just allocated.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-26 10:09:15 +08:00
Joel Becker
1ed9b777f7 ocfs2: ocfs2_claim_*() don't need an ocfs2_super argument.
They all take an ocfs2_alloc_context, which has the allocation inode.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-05-06 13:59:06 +08:00
Tao Ma
c901fb0073 ocfs2: Make ocfs2_extend_trans() really extend.
In ocfs2, we use ocfs2_extend_trans() to extend a journal handle's
blocks. But if jbd2_journal_extend() fails, it will only restart
with the the new number of blocks.  This tends to be awkward since
in most cases we want additional reserved blocks. It makes our code
harder to mantain since the caller can't be sure all the original
blocks will not be accessed and dirtied again.  There are 15 callers
of ocfs2_extend_trans() in fs/ocfs2, and 12 of them have to add
h_buffer_credits before they call ocfs2_extend_trans().  This makes
ocfs2_extend_trans() really extend atop the original block count.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05 18:18:09 -07:00
Joel Becker
ec20cec7a3 ocfs2: Make ocfs2_journal_dirty() void.
jbd[2]_journal_dirty_metadata() only returns 0.  It's been returning 0
since before the kernel moved to git.  There is no point in checking
this error.

ocfs2_journal_dirty() has been faithfully returning the status since the
beginning.  All over ocfs2, we have blocks of code checking this can't
fail status.  In the past few years, we've tried to avoid adding these
checks, because they are pointless.  But anyone who looks at our code
assumes they are needed.

Finally, ocfs2_journal_dirty() is made a void function.  All error
checking is removed from other files.  We'll BUG_ON() the status of
jbd2_journal_dirty_metadata() just in case they change it someday.  They
won't.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05 18:17:29 -07:00
Tao Ma
b23179681c ocfs2: Init meta_ac properly in ocfs2_create_empty_xattr_block.
You can't store a pointer that you haven't filled in yet and expect it
to work.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-19 14:53:52 -07:00
Tao Ma
dfe4d3d6a6 ocfs2: Fix the update of name_offset when removing xattrs
When replacing a xattr's value, in some case we wipe its name/value
first and then re-add it. The wipe is done by
ocfs2_xa_block_wipe_namevalue() when the xattr is in the inode or
block. We currently adjust name_offset for all the entries which have
(offset < name_offset). This does not adjust the entrie we're replacing.
Since we are replacing the entry, we don't adjust the total entry count.
When we calculate a new namevalue location, we trust the entries
now-wrong offset in ocfs2_xa_get_free_start().  The solution is to
also adjust the name_offset for the replaced entry, allowing
ocfs2_xa_get_free_start() to calculate the new namevalue location
correctly.

The following script can trigger a kernel panic easily.

echo 'y'|mkfs.ocfs2 --fs-features=local,xattr -b 4K $DEVICE
mount -t ocfs2 $DEVICE $MNT_DIR
FILE=$MNT_DIR/$RANDOM
for((i=0;i<76;i++))
do
string_76="a$string_76"
done
string_78="aa$string_76"
string_82="aaaa$string_78"

touch $FILE
setfattr -n 'user.test1234567890' -v $string_76 $FILE
setfattr -n 'user.test1234567890' -v $string_78 $FILE
setfattr -n 'user.test1234567890' -v $string_82 $FILE

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-19 14:53:51 -07:00
Joel Becker
399ff3a748 ocfs2: Handle errors while setting external xattr values.
ocfs2 can store extended attribute values as large as a single file.  It
does this using a standard ocfs2 btree for the large value.  However,
the previous code did not handle all error cases cleanly.

There are multiple problems to have.

1) We have trouble allocating space for a new xattr.  This leaves us
   with an empty xattr.
2) We overwrote an existing local xattr with a value root, and now we
   have an error allocating the storage.  This leaves us an empty xattr.
   where there used to be a value.  The value is lost.
3) We have trouble truncating a reused value.  This leaves us with the
   original entry pointing to the truncated original value.  The value
   is lost.
4) We have trouble extending the storage on a reused value.  This leaves
   us with the original value safely in place, but with more storage
   allocated when needed.

This doesn't consider storing local xattrs (values that don't require a
btree).  Those only fail when the journal fails.

Case (1) is easy.  We just remove the xattr we added.  We leak the
storage because we can't safely remove it, but otherwise everything is
happy.  We'll print a warning about the leak.

Case (4) is easy.  We still have the original value in place.  We can
just leave the extra storage attached to this xattr.  We return the
error, but the old value is untouched.  We print a warning about the
storage.

Case (2) and (3) are hard because we've lost the original values.  In
the old code, we ended up with values that could be partially read.
That's not good.  Instead, we just wipe the xattr entry and leak the
storage.  It stinks that the original value is lost, but now there isn't
a partial value to be read.  We'll print a big fat warning.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:13 -08:00
Joel Becker
139ffacebf ocfs2: Set inline xattr entries with ocfs2_xa_set()
ocfs2_xattr_ibody_set() is the only remaining user of
ocfs2_xattr_set_entry().  ocfs2_xattr_set_entry() actually does two
things: it calls ocfs2_xa_set(), and it initializes the inline xattrs.
Initializing the inline space really belongs in its own call.

We lift the initialization to ocfs2_xattr_ibody_init(), called from
ocfs2_xattr_ibody_set() only when necessary.  Now
ocfs2_xattr_ibody_set() can call ocfs2_xa_set() directly.
ocfs2_xattr_set_entry() goes away.

Another nice fact is that ocfs2_init_dinode_xa_loc() can trust
i_xattr_inline_size.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:13 -08:00
Joel Becker
d3981544d7 ocfs2: Set xattr block entries with ocfs2_xa_set()
ocfs2_xattr_block_set() calls into ocfs2_xattr_set_entry() with just the
HAS_XATTR flag.  Most of the machinery of ocfs2_xattr_set_entry() is
skipped.  All that really happens other than the call to ocfs2_xa_set()
is making sure the HAS_XATTR flag is set on the inode.

But HAS_XATTR should be set when we also set di->i_xattr_loc.  And
that's done in ocfs2_create_xattr_block().  So let's move it there, and
then ocfs2_xattr_block_set() can just call ocfs2_xa_set().

While we're there, ocfs2_create_xattr_block() can take the set_ctxt for
a smaller argument list.  It also learns to set HAS_XATTR_FL, because it
knows for sure.  ocfs2_create_empty_xatttr_block() in the reflink path
fakes a set_ctxt to call ocfs2_create_xattr_block().

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:13 -08:00
Joel Becker
c5d95df5f7 ocfs2: Let ocfs2_xa_prepare_entry() do space checks.
ocfs2_xattr_set_in_bucket() doesn't need to do its own hacky space
checking.  Let's let ocfs2_xa_prepare_entry() (via ocfs2_xa_set()) do
the more accurate work.  Whenever it doesn't have space,
ocfs2_xattr_set_in_bucket() can try to get more space.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:12 -08:00
Joel Becker
bca5e9bd1e ocfs2: Gell into ocfs2_xa_set()
ocfs2_xa_set() wraps the ocfs2_xa_prepare_entry()/ocfs2_xa_store_value()
logic.  Both callers can now use the same routine.  ocfs2_xa_remove()
moves directly into ocfs2_xa_set().

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:11 -08:00
Joel Becker
73857ee0b5 ocfs2: Allocation in ocfs2_xa_prepare_entry(), values in ocfs2_xa_store_value()
ocfs2_xa_prepare_entry() gets all the logic to add, remove, or modify
external value trees.  Now, when it exits, the entry is ready to receive
a value of any size.

ocfs2_xa_remove() is added to handle the complete removal of an entry.
It truncates the external value tree before calling
ocfs2_xa_remove_entry().

ocfs2_xa_store_inline_value() becomes ocfs2_xa_store_value().  It can
store any value.

ocfs2_xattr_set_entry() loses all the allocation logic and just uses
these functions.  ocfs2_xattr_set_value_outside() disappears.

ocfs2_xattr_set_in_bucket() uses these functions and makes
ocfs2_xattr_set_entry_in_bucket() obsolete.  That goes away, as does
ocfs2_xattr_bucket_set_value_outside() and
ocfs2_xattr_bucket_value_truncate().

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:11 -08:00
Joel Becker
cf2bc80940 ocfs2: Teach ocfs2_xa_loc how to do its own journal work
We're going to want to make sure our buffers get accessed and dirtied
correctly.  So have the xa_loc do the work.  This includes storing the
inode on ocfs2_xa_loc.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:11 -08:00
Joel Becker
3fc12afa0c ocfs2: Provide ocfs2_xa_fill_value_buf() for external value processing
We use the ocfs2_xattr_value_buf structure to manage external values.
It lets the value tree code do its work regardless of the containing
storage.  ocfs2_xa_fill_value_buf() initializes a value buf from an
ocfs2_xa_loc entry.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:11 -08:00
Joel Becker
9dc474005d ocfs2: Handle value tree roots in ocfs2_xa_set_inline_value()
Previously the xattr code would send in a fake value, containing a tree
root, to the function that installed name+value pairs.  Instead, we pass
the real value to ocfs2_xa_set_inline_value(), and it notices that the
value cannot fit.  Thus, it installs a tree root.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:10 -08:00
Joel Becker
69a3e539d0 ocfs2: Set the xattr name+value pair in one place
We create two new functions on ocfs2_xa_loc, ocfs2_xa_prepare_entry()
and ocfs2_xa_store_inline_value().

ocfs2_xa_prepare_entry() makes sure that the xl_entry field of
ocfs2_xa_loc is ready to receive an xattr.  The entry will point to an
appropriately sized name+value region in storage.  If an existing entry
can be reused, it will be.  If no entry already exists, it will be
allocated.  If there isn't space to allocate it, -ENOSPC will be
returned.

ocfs2_xa_store_inline_value() stores the data that goes into the 'value'
part of the name+value pair.  For values that don't fit directly, this
stores the value tree root.

A number of operations are added to ocfs2_xa_loc_operations to support
these functions.  This reflects the disparate behaviors of xattr blocks
and buckets.

With these functions, the overlapping ocfs2_xattr_set_entry_local() and
ocfs2_xattr_set_entry_normal() can be replaced with a single call
scheme.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:10 -08:00
Joel Becker
199799a360 ocfs2: Wrap calculation of name+value pair size.
An ocfs2 xattr entry stores the text name and value as a pair in the
storage area.  Obviously names and values can be variable-sized.  If a
value is too large for the entry storage, a tree root is stored instead.
The name+value pair is also padded.

Because of this, there are a million places in the code that do:

	if (needs_external_tree(value_size)
		namevalue_size = pad(name_size) + tree_root_size;
	else
		namevalue_size = pad(name_size) + pad(value_size);

Let's create some convenience functions to make the code more readable.
There are three forms.  The first takes the raw sizes.  The second takes
an ocfs2_xattr_info structure.  The third takes an existing
ocfs2_xattr_entry.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:10 -08:00
Joel Becker
18853b95d1 ocfs2: Add a name_len field to ocfs2_xattr_info.
Rather than calculating strlen all over the place, let's store the
name length directly on ocfs2_xattr_info.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:09 -08:00
Joel Becker
6b240ff63c ocfs2: Prefix the member fields of struct ocfs2_xattr_info.
struct ocfs2_xattr_info is a useful structure describing an xattr
you'd like to set.  Let's put prefixes on the member fields so it's
easier to read and use.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:09 -08:00
Joel Becker
bde1e5400a ocfs2: Remove xattrs via ocfs2_xa_loc
Add ocfs2_xa_remove_entry(), which will remove an xattr entry from its
storage via the ocfs2_xa_loc descriptor.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:09 -08:00
Joel Becker
11179f2c92 ocfs2: Introduce ocfs2_xa_loc
The ocfs2 extended attribute (xattr) code is very flexible.  It can
store xattrs in the inode itself, in an external block, or in a tree of
data structures.  This allows the number of xattrs to be bounded by the
filesystem size.

However, the code that manages each possible storage location is
different.  Maintaining the ocfs2 xattr code requires changing each hunk
separately.

This patch is the start of a series introducing the ocfs2_xa_loc
structure.  This structure wraps the on-disk details of an xattr
entry.  The goal is that the generic xattr routines can use
ocfs2_xa_loc without knowing the underlying storage location.

This first pass merely implements the basic structure, initializing it,
and wiping the name+value pair of the entry.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:08 -08:00
Tiger Yang
b89c54282d ocfs2: add extent block stealing for ocfs2 v5
This patch add extent block (metadata) stealing mechanism for
extent allocation. This mechanism is same as the inode stealing.
if no room in slot specific extent_alloc, we will try to
allocate extent block from the next slot.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-02-26 15:41:07 -08:00
Linus Torvalds
45e62974fb Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c
  ocfs2/trivial: Use proper mask for 2 places in hearbeat.c
  Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink.
  Ocfs2: Should ocfs2 support fiemap for S_IFDIR inode?
  ocfs2: Use FIEMAP_EXTENT_SHARED
  fiemap: Add new extent flag FIEMAP_EXTENT_SHARED
  ocfs2: replace u8 by __u8 in ocfs2_fs.h
  ocfs2: explicit declare uninitialized var in user_cluster_connect()
  ocfs2-devel: remove redundant OCFS2_MOUNT_POSIX_ACL check in ocfs2_get_acl_nolock()
  ocfs2: return -EAGAIN instead of EAGAIN in dlm
  ocfs2/cluster: Make fence method configurable - v2
  ocfs2: Set MS_POSIXACL on remount
  ocfs2: Make acl use the default
  ocfs2: Always include ACL support
2009-12-24 12:59:11 -08:00
Tao Ma
8ff6af881d ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c
In ocfs2_value_metas_in_xattr_header, we should Use
le16_to_cpu for ocfs2_extent_list.l_next_free_rec.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-12-23 17:52:16 -08:00
Christoph Hellwig
431547b3c4 sanitize xattr handler prototypes
Add a flags argument to struct xattr_handler and pass it to all xattr
handler methods.  This allows using the same methods for multiple
handlers, e.g. for the ACL methods which perform exactly the same action
for the access and default ACLs, just using a different underlying
attribute.  With a little more groundwork it'll also allow sharing the
methods for the regular user/trusted/secure handlers in extN, ocfs2 and
jffs2 like it's already done for xfs in this patch.

Also change the inode argument to the handlers to a dentry to allow
using the handlers mechnism for filesystems that require it later,
e.g. cifs.

[with GFS2 bits updated by Steven Whitehouse <swhiteho@redhat.com>]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:49 -05:00
Jan Kara
e6aabe0cac ocfs2: Always include ACL support
To become consistent with filesystems such as XFS or BTRFS, make posix
ACLs always available. This also reduces possibility of
misconfiguration on admin's side.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-10-28 23:05:57 -07:00
Tao Ma
0fe9b66c65 ocfs2: Add preserve to reflink.
reflink has 2 options for the destination file:
1. snapshot: reflink will attempt to preserve ownership, permissions,
   and all other security state in order to create a full snapshot.
2. new file: it will acquire the data extent sharing but will see the
   file's security state and attributes initialized as a new file.

So add the option to ocfs2.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:49 -07:00
Tao Ma
ce9c5a54c0 ocfs2: Modify removing xattr process for refcount.
The old xattr value remove is quite simple, it just erase the
tree and free the clusters. But as we have added refcount support,
The process is a little complicated.

We have to lock the refcount tree at the beginning, what's more,
we may split the refcount tree in some cases, so meta/credits are
needed.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:45 -07:00
Tao Ma
2999d12f4d ocfs2: Add reflink support for xattr.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:45 -07:00
Tao Ma
a7fe7a3a1a ocfs2: Create an xattr indexed block if needed.
With reflink, there is a need that we create a new xattr indexed
block from the very beginning. So add a new parameter for
ocfs2_create_xattr_block.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:44 -07:00
Tao Ma
8b2c0dba51 ocfs2: Call refcount tree remove process properly.
Now with xattr refcount support, we need to check whether
we have xattr refcounted before we remove the refcount tree.

Now the mechanism is:
1) Check whether i_clusters == 0, if no, exit.
2) check whether we have i_xattr_loc in dinode. if yes, exit.
2) Check whether we have inline xattr stored outside, if yes, exit.
4) Remove the tree.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:44 -07:00
Tao Ma
0129241e2b ocfs2: Attach xattr clusters to refcount tree.
In ocfs2, when xattr's value is larger than OCFS2_XATTR_INLINE_SIZE,
it will be kept outside of the blocks we store xattr entry. And they
are stored in a b-tree also. So this patch try to attach all these
clusters to refcount tree also.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:43 -07:00
Tao Ma
47bca4950b ocfs2: Abstract ocfs2 xattr tree extend rec iteration process.
Currently we have ocfs2_iterate_xattr_buckets which can receive
a para and a callback to iterate a series of bucket. It is good.
But actually the 2 callers ocfs2_xattr_tree_list_index_block and
ocfs2_delete_xattr_index_block are almost the same. The only
difference is that the latter need to handle the extent record
also. So add a new function named ocfs2_iterate_xattr_index_block.
It can be given func callback which are used for exten record.
So now we only have one iteration function for the xattr index
block. Ane what's more, it is useful for our future reflink
operations.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:43 -07:00
Tao Ma
5aea1f0ef4 ocfs2: Abstract the creation of xattr block.
In xattr reflink, we also need to create xattr block, so
abstract the process out.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:42 -07:00
Tao Ma
fd68a894fc ocfs2: Remove inode from ocfs2_xattr_bucket_get_name_value.
In ocfs2_xattr_bucket_get_name_value, actually we only use
super_block. So use it.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:41 -07:00
Tao Ma
492a8a33e1 ocfs2: Add CoW support for xattr.
In order to make 2 transcation(xattr and cow) independent with each other,
we CoW the whole xattr out in case we are setting them.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22 20:09:41 -07:00