Commit Graph

59 Commits

Author SHA1 Message Date
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Ricardo Ribalda
a094c2fa09
spi: xilinx: Add support for xlnx,axi-quad-spi-1.00.a
The driver has been successfully tested with Xilinx's core
axi-quad-spi-1.0.0a. Documented on DS843:

https://www.xilinx.com/support/documentation/ip_documentation/axi_quad_spi/v1_00_a/ds843_axi_quad_spi.pdf

Cc: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-27 16:31:20 +00:00
Ricardo Ribalda
5a1314fa69
spi: xilinx: Detect stall with Unknown commands
When the core is configured in C_SPI_MODE > 0, it integrates a
lookup table that automatically configures the core in dual or quad mode
based on the command (first byte on the tx fifo).

Unfortunately, that list mode_?_memoy_*.mif does not contain all the
supported commands by the flash.

Since 4.14 spi-nor automatically tries to probe the flash using SFDP
(command 0x5a), and that command is not part of the list_mode table.

Whit the right combination of C_SPI_MODE and C_SPI_MEMORY this leads
into a stall that can only be recovered with a soft rest.

This patch detects this kind of stall and returns -EIO to the caller on
those commands. spi-nor can handle this error properly:

m25p80 spi0.0: Detected stall. Check C_SPI_MODE and C_SPI_MEMORY. 0x21 0x2404
m25p80 spi0.0: SPI transfer failed: -5
spi_master spi0: failed to transfer one message from queue
m25p80 spi0.0: s25sl064p (8192 Kbytes)

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2017-11-24 13:09:22 +00:00
Lars-Peter Clausen
d336484785 spi: xilinx: Return IRQ_NONE if no interrupts were detected
Return IRQ_NONE from the interrupt handler if the handler is running, but
no interrupt was detected. This allows the system to recover in case of an
interrupt storm due to an invalid interrupt configuration or faulty
hardware.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-15 11:45:00 +01:00
Lars-Peter Clausen
4db9bf548b spi: xilinx: Handle errors from platform_get_irq()
The Xilinx SPI driver can operate without an IRQ, but not every error
returned by platform_get_irq() means that no IRQ was specified. It will
also return an error if the IRQ specification is invalid or the IRQ
provider is not yet available (EPROBE_DEFER).

So instead of ignoring all errors only ignore ENXIO, which means no IRQ was
specified, and propagate all other errors to device driver core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-15 11:44:59 +01:00
Ricardo Ribalda Delgado
eca37c7c11 spi/spi-xilinx: Fix race condition on last word read
Some users have reported that in polled mode the driver fails randomly
to read the last word of the transfer.

The end condition used for the transmissions (in polled and irq mode)
has been the TX_EMPTY flag. But Lars-Peter Clausen has identified a delay
from the TX_EMPTY to the actual end of the data rx.

I believe that this race condition has not been detected until now
because of the latency added by the IRQ handler or the PCIe bridge.
This bugs affects setups with low latency access to the spi core.

This patch replaces the readout logic:

For all the words, except the last one, the TX_EMPTY flag is used (and
cached).

If !TX_EMPY or is the last word. The status register is read and the
RX_EMPTY flag is used.

The performance is not affected: there is an extra read of the
Status Register, but the readout can start as soon as there is a word
in the buffer.

Reported-by: Edward Kigwana <ekigwana@scires.com>
Initial-fix-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-10-29 09:03:42 +09:00
Ricardo Ribalda Delgado
74346841e6 spi/spi-xilinx: Fix spurious IRQ ACK on irq mode
The ACK of an inexistent IRQ can trigger an spurious IRQ that breaks the
txrx logic. This has been observed on axi_quad_spi:3.2 core.

This patch only ACKs IRQs that have not been Acknowledge jet.

Reported-by: Edward Kigwana <ekigwana@scires.com>
Tested-by: Edward Kigwana <ekigwana@scires.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-08-14 16:35:19 +01:00
Ricardo Ribalda Delgado
16ea9b8ac4 spi/spi-xilinx: Fix mixed poll/irq mode
Once the module process a transfer in irq mode, the next poll transfer
will not work because the transmitter is left in inhibited state.

Fixes: 22417352f6 (Use polling mode on small transfers)
Reported-by: Edward Kigwana <ekigwana@scires.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-08-13 12:29:23 +01:00
Ricardo Ribalda Delgado
34093cb97a spi/xilinx: Fix access invalid memory on xilinx_spi_tx
On 1 and 2 bytes per word, the transfer of the 3 last bytes will access
memory outside tx_ptr.

Although this has not trigger any error on real hardware, we should
better fix this.

Fixes: 24ba5e593f (Remove rx_fn and tx_fn pointer)
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-02 12:17:19 +00:00
Mark Brown
0635287a30 spi: Revert "spi/xilinx: Remove iowrite/ioread wrappers"
This reverts commit 99082eab63 since it
breaks the build due to differing implementations of iowrite() and
ioread().

Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-30 13:42:00 +01:00
Ricardo Ribalda
eb25f16c6f spi/xilinx: Check number of slaves range
The core only supports up to 32 slaves, and the chipselect function
expects the same.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:57:32 +00:00
Ricardo Ribalda Delgado
22417352f6 spi/xilinx: Use polling mode on small transfers
Small transfers generally can be accomplished faster in polling mode.
This patch select the transfer which size is bellow the buffer size to
be done on polling mode

Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:43 +00:00
Ricardo Ribalda Delgado
b563bfb8d7 spi/xilinx: Remove remaining_words driver data variable
The variable never leaves the scope of txrx_bufs.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:43 +00:00
Ricardo Ribalda Delgado
99082eab63 spi/xilinx: Remove iowrite/ioread wrappers
Save a stack level and cleanup code.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:43 +00:00
Ricardo Ribalda Delgado
17aaaa8032 spi/xilinx: Convert bits_per_word in bytes_per_word
Simplify the code by using the unit used on most of the code logic.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:43 +00:00
Ricardo Ribalda Delgado
d79b2d073a spi/xilinx: Convert remainding_bytes in remaining words
Simplify the code by using the unit used on most of the code logic.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:43 +00:00
Ricardo Ribalda Delgado
c30929415a spi/xilinx: Make spi_tx and spi_rx simmetric
spi_rx handles the case where the buffer is null. Nevertheless spi_tx
did not handle it, and was handled by the caller function.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:43 +00:00
Ricardo Ribalda Delgado
24ba5e593f spi/xilinx: Remove rx_fn and tx_fn pointer
Simplify the code by removing the tx and and rx function pointers and
substitute them by a single function.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:42 +00:00
Ricardo Ribalda Delgado
f9c6ef6cfe spi/xilinx: Support for spi mode CS_HIGH
The core controls the chip select lines individually.

By default, all the lines are consider active_low. After
spi_setup_transfer, it has its real value.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:42 +00:00
Ricardo Ribalda Delgado
d9f5881242 spi/xilinx: Do not inhibit transmission in polling mode
When no irq is used, there is no need to inhibit the transmission for
every transaction. This inhibition was implemented to avoid a race
condition with the irq handler.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:42 +00:00
Ricardo Ribalda Delgado
5fe11cc09c spi/xilinx: Support cores with no interrupt
The core can run in polling mode. In fact, the performance of the core
is similar (or even better), due to the fact most of the spi
transactions are just a couple of bytes and there is one irq per
transactions.

When an mtd device is connected via spi, reading 8MB of data produces
more than 80K interrupts (with irq disabling, context swith....)

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:42 +00:00
Ricardo Ribalda Delgado
5b74d7a3b8 spi/xilinx: Use cached value of register
The control register has not changed since the previous access.
Therefore we can use the cached value and safe one bus access.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:42 +00:00
Ricardo Ribalda Delgado
a87cbca0ac spi/xilinx: Code cleanup
On the transmission loop, check for remaining bytes at the loop
condition.

This way we can handle transmissions of 0 bytes and clean the code.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:42 +00:00
Ricardo Ribalda Delgado
899929baba spi/xilinx: Leave the IRQ always enabled.
Instead of enabling the IRQ and disabling it for every transaction.

Specially the small transactions (1,2 words) benefit from removing 3 bus
accesses.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:42 +00:00
Ricardo Ribalda Delgado
4c9a761402 spi/xilinx: Simplify spi_fill_tx_fifo
Instead of checking the TX_FULL flag for every transaction, find out the
size of the buffer at probe time and use it.

To avoid situations where the core had some data on the buffer before
initialization, the core is reseted before the buffer size is detected

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 19:42:42 +00:00
Ricardo Ribalda Delgado
c5d348dffa spi/xilinx: Simplify data read from the Rx FIFO
The number of words in the read buffer will be exactly the same as the
number of words written on write buffer, once the transaction has
finished.

Instead of cheking the rx_empty flags for every word simply save the
number of words written by fill_tx_fifo.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 17:25:34 +00:00
Ricardo Ribalda Delgado
0240f94516 spi/xilinx: Support for spi mode LOOP
Hardware supports LOOP mode. Support it also in the driver.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-26 19:23:35 +00:00
Ricardo Ribalda Delgado
bca690db90 spi/xilinx: Support for spi mode LSB_FIRST
Hardware supports LSB_FIRST mode. Support it also in the driver.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-26 19:23:35 +00:00
Michal Simek
9c0b8fd1a5 spi: xilinx: Remove .owner field for driver
There is no need to init .owner field.

Based on the patch from Peter Griffin <peter.griffin@linaro.org>
"mmc: remove .owner field for drivers using module_platform_driver"

This patch removes the superflous .owner field for drivers which
use the module_platform_driver API, as this is overriden in
platform_driver_register anyway."

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-16 17:15:47 -05:00
Lars-Peter Clausen
4b153a2137 spi: xilinx: Use pdev->id instead of pdev->dev.id for the SPI bus number
The Xilinx SPI driver initializes the bus_num field of the SPI master to
pdev->dev.id. pdev->dev.id is always 0 for platform devices which causes bus
number conflicts for the SPI controller when creating multiple device instances
of the driver. Instead use pdev->id which will have the assignt platform device
id. If the device is instantiated via devicetree pdev->id is -1 which will cause
the SPI core to dynamically assign a id (or use the id defined via a alias in
the devicetree).

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-10 12:38:45 +02:00
Mark Brown
45b15d98a9 Merge remote-tracking branches 'spi/topic/xilinx' and 'spi/topic/xtfpga' into spi-next 2014-03-30 00:51:48 +00:00
Jingoo Han
6ff8672a96 spi: xilinx: remove unnecessary spaces
Remove unnecessary space in order to fix the following
checkpatch issues.

  WARNING: Unnecessary space after function pointer name

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-27 13:40:07 +09:00
Axel Lin
9bf46f6df5 spi: xilinx: Convert to let spi core validate bits_per_word
Set bits_per_word_mask so spi core will reject transfers that attempt to use
an unsupported bits_per_word value.

spi_bitbang requires custom setup_transfer() to be defined if there is a
custom txrx_bufs(). Thus keep the empty xilinx_spi_setup_transfer() function
in the code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23 12:53:21 +09:00
Paul Gortmaker
3a44623d5e spi: delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03 12:20:35 +00:00
Wolfram Sang
16735d022f tree-wide: use reinit_completion instead of INIT_COMPLETION
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.

[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:21 +09:00
Axel Lin
94c69f765f spi: bitbang: Let spi_bitbang_start() take a reference to master
Many drivers that use bitbang library have a leak on probe error paths.
This is because once a spi_master_get() call succeeds, we need an additional
spi_master_put() call to free the memory.

Fix this issue by moving the code taking a reference to master to
spi_bitbang_start(), so spi_bitbang_start() will take a reference to master on
success. With this change, the caller is responsible for calling
spi_bitbang_stop() to decrement the reference and spi_master_put() as
counterpart of spi_alloc_master() to prevent a memory leak.

So now we have below patten for drivers using bitbang library:

probe:
spi_alloc_master        -> Init reference count to 1
spi_bitbang_start       -> Increment reference count
remove:
spi_bitbang_stop        -> Decrement reference count
spi_master_put          -> Decrement reference count (reference count reaches 0)

Fixup all users accordingly.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Suggested-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17 12:56:14 +01:00
Mark Brown
68aa4cb337 Merge remote-tracking branch 'spi/topic/pdata' into spi-next 2013-09-01 13:49:03 +01:00
Mark Brown
b5f9a9d511 Merge remote-tracking branch 'spi/topic/rspi' into spi-pdata
Conflicts:
	drivers/spi/spi-rspi.c
2013-08-29 13:59:05 +01:00
Jingoo Han
8074cf063e spi: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29 13:56:23 +01:00
Mark Brown
30af9b558a spi/bitbang: Drop empty setup() functions
Now that the bitbang core does not require a setup() function we can
drop the check in the altera, nuc900 and xilinx drivers.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-09 17:32:10 +01:00
Dan Carpenter
9ca1273bb9 spi/xilinx: signedness issue checking platform_get_irq()
In xilinx_spi_probe() we use xspi->irq to store negative error codes so
it has to be signed.  We weren't going to use the upper bit any way so
this is fine.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-17 18:19:44 +01:00
Michal Simek
7b3b7432ae spi/xilinx: Simplify irq allocation
Use devm_request_irq() for irq allocation which
simplify driver code.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15 11:45:53 +01:00
Michal Simek
be3acdff94 spi/xilinx: Use of_property_read_u32 for reading value from node
It simplifies driver probing.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15 11:45:53 +01:00
Michal Simek
ad3fdbcaf9 spi/xilinx: Clean ioremap calling
devm_ioremap_resource() automatically checks that
struct resource is initialized.
Also group platform_get_resource() and devm_ioremap_resource()
together.
And remove mem resource from struct xilinx_spi.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15 11:45:53 +01:00
Michal Simek
5586c09e19 spi/xilinx: Remove CONFIG_OF from the driver
dev.of_node is in struct device all the time.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15 11:45:53 +01:00
Mark Brown
7cb2abd05f spi/xilinx: Refer to platform device as pdev in probe() and remove()
This is a more traditional name and makes things a bit clearer when
referring to actual struct devices as we do frequently during probe().

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2013-07-15 11:45:52 +01:00
Mark Brown
d81c0bbbf8 spi/xilinx: Remove remains of of_platform device registration
In the past there used to be a separate platform device type for device
tree systems so the probe and removal functions were split into generic
and bus sections. Since this is no longer the case simplify the code (and
remove some unprototyped exports) by factoring everything into the bus
probe() and remove().

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15 11:45:52 +01:00
Mark Brown
c40537d008 spi/xilinx: Convert to devm_ioremap_resource()
Saves code and reduces the possibility of error.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15 11:45:52 +01:00
Michal Simek
e076195390 spi/xilinx: Revert master->setup function removal
master->setup() must be initialized to be able
to successfully run spi_bitbang_start()
and satisfy if/else logic there.

"spi: convert drivers to use bits_per_word_mask"
(sha1: 24778be20f)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-10 09:45:48 +01:00
Mark Brown
ed893559c9 Merge remote-tracking branch 'spi/topic/xilinx' into spi-next 2013-06-26 16:21:06 +01:00