If EXT4_IOC_MOVE_EXT ioctl is called with NULL donor_fd, fget() in
ext4_ioctl() gets inappropriate file structure for donor; so we need
to do this check earlier, before calling double_down_write_data_sem().
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the leaf node has 2 extent space or fewer and EXT4_IOC_MOVE_EXT
ioctl is called with the file offset where after the 2nd extent
covers, mext_insert_across_blocks() always tries to insert extent into
the first extent. As a result, the file gets corrupted because of
wrong extent order. The patch fixes this problem.
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The cpumask of the padata instance was used without allocated.
This caused boot crashes if CONFIG_CPUMASK_OFFSTACK is enabled.
This patch fixes this by doing proper allocation for this cpumask.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are duplicate macro definitions of in_range() in mballoc.h and
balloc.c. This consolidates these two definitions into ext4.h, and
changes extents.c to use in_range() as well.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@sun.com>
More cleanup to convert open-coded calculations of the first block
number of a free extent to use ext4_grp_offs_to_block() instead.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@sun.com>
This is a cleanup and simplification patch which takes some open-coded
calculations to calculate the first block number of a group and
converts them to use the (already defined) ext4_group_first_block_no()
function.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@sun.com>
If the calling convention of ->timer_fn() and ->cleanup_fn() are unified
across hardware versions we can drop parameters to ioat_init_channel() and
unify ioat_is_dma_complete() implementations.
Both ->timer_fn() and ->cleanup_fn() are modified to expect a struct
dma_chan pointer.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The hardware automatically disables further interrupts after each event
until rearmed. This allows a delay to be injected between the occurence
of the interrupt and the running of the cleanup routine. The delay is
scaled by the descriptor backlog and then written to the INTRDELAY
register which specifies the number of microseconds to hold off
interrupt delivery after an interrupt event occurs. According to
powertop this reduces the interrupt rate from ~5000 intr/s to ~150
intr/s per without affecting throughput (simple dd to a raid6 array).
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Since ioat_cleanup_preamble() and the update of the last completed
descriptor are not synchronized there is a chance that two cleanup threads
can see descriptors to clean. If the first cleans up all pending
descriptors then the second will trigger the BUG_ON.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This makes sure that we pick the synchronous signals caused by a
processor fault over any pending regular asynchronous signals sent to
use by [t]kill().
This is not strictly required semantics, but it makes it _much_ easier
for programs like Wine that expect to find the fault information in the
signal stack.
Without this, if a non-synchronous signal gets picked first, the delayed
asynchronous signal will have its signal context pointing to the new
signal invocation, rather than the instruction that caused the SIGSEGV
or SIGBUS in the first place.
This is not all that pretty, and we're discussing making the synchronous
signals more explicit rather than have these kinds of implicit
preferences of SIGSEGV and friends. See for example
http://bugzilla.kernel.org/show_bug.cgi?id=15395
for some of the discussion. But in the meantime this is a simple and
fairly straightforward work-around, and the whole
if (x & Y)
x &= Y;
thing can be compiled into (and gcc does do it) just three instructions:
movq %rdx, %rax
andl $Y, %eax
cmovne %rax, %rdx
so it is at least a simple solution to a subtle issue.
Reported-and-tested-by: Pavel Vilim <wylda@volny.cz>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 9c1390a923ddb6fba1cf9d7440743369140c6d8a replaced
all u_int's with u32 and u_long's with u64. Unfortunately, a u_long
is still only 32-bits so they should have been replaced with u32 also.
This can be verified by the register definitions in dt3155_io.h. It
specifically states that the memory mapped registers are 32-bit.
Fix this by changing all the u64 to u32.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
+#include <asm/io.h>
WARNING: braces {} are not necessary for any arm of this statement
+ if (dev->driver) {
[...]
+ } else {
[...]
WARNING: braces {} are not necessary for single statement blocks
+ if (insn->insn == INSN_READ) {
+ data[0] = (new_data[1] >> (chan - base_bitfield_channel)) & 1;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (async->prealloc_buf && async->prealloc_bufsz == new_size) {
+ return 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (async->buf_page_list[i].virt_addr == NULL) {
+ break;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if ((int)(async->buf_write_alloc_count + nbytes - free_end) > 0) {
+ nbytes = free_end - async->buf_write_alloc_count;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if ((int)(async->buf_write_alloc_count + nbytes - free_end) > 0) {
+ nbytes = 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (async->buf_write_ptr >= async->prealloc_bufsz) {
+ async->buf_write_ptr %= async->prealloc_bufsz;
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: do not use C99 // comments
+ volatile u_char radioModule;// shows EEPROM, can be overridden at 0x111
ERROR: do not use C99 // comments
+ volatile u_char defaultChannelSet; // shows EEProm, can be overriiden at 0x10A
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: space prohibited between function name and open parenthesis '('
+void MD4Init (MD4_CTX *);
WARNING: space prohibited between function name and open parenthesis '('
+void MD4Update (MD4_CTX *, u8 *, UINT);
WARNING: space prohibited between function name and open parenthesis '('
+void MD4Final (u8 [16], MD4_CTX *);
ERROR: do not use C99 // comments
+#endif //__MD4_H__
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: trailing whitespace
+ * Copyright (C) 1998 Elmer.Joandi@ut.ee, +37-255-13500^I$
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
+#include <asm/io.h>
ERROR: do not use C99 // comments
+//#define ARLAN_DEBUGGING 1
ERROR: "foo * bar" should be "foo *bar"
+extern int arlan_command(struct net_device * dev, int command);
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+#define IFDEBUG( L ) if ( (L) & arlan_debug ) $
ERROR: space prohibited after that open parenthesis '('
+#define IFDEBUG( L ) if ( (L) & arlan_debug )
ERROR: space prohibited before that close parenthesis ')'
+#define IFDEBUG( L ) if ( (L) & arlan_debug )
ERROR: trailing whitespace
+#define ARLAN_FAKE_HDR_LEN 12 $
ERROR: space required after that ',' (ctx:VxV)
+ #define ARLAN_DEBUG(a,b) printk(KERN_DEBUG a, b)
^
ERROR: trailing whitespace
+^I#define ARLAN_DEBUG(a,b) $
ERROR: space required after that ',' (ctx:VxV)
+ #define ARLAN_DEBUG(a,b)
^
ERROR: open brace '{' following struct go on the same line
+struct arlan_shmem
+{
ERROR: trailing whitespace
+ /* Header Signature */ $
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ int systemId; $
ERROR: open brace '{' following struct go on the same line
+struct TxParam
+{
ERROR: "foo * bar" should be "foo *bar"
+ struct arlan_shmem __iomem * card;
ERROR: "foo * bar" should be "foo *bar"
+ struct arlan_shmem * conf;
ERROR: trailing whitespace
+ struct arlan_conf_stru * Conf;^I $
ERROR: "foo * bar" should be "foo *bar"
+ struct arlan_conf_stru * Conf;
ERROR: trailing whitespace
+ $
ERROR: space required after that ',' (ctx:VxV)
+#define READSHM(to,from,atype) {\
^
ERROR: space required after that ',' (ctx:VxV)
+#define READSHM(to,from,atype) {\
^
ERROR: space required after that ',' (ctx:VxO)
+ memcpy_fromio(&(tmp),&(from),sizeof(atype));\
^
ERROR: space required before that '&' (ctx:OxV)
+ memcpy_fromio(&(tmp),&(from),sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+ memcpy_fromio(&(tmp),&(from),sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+#define READSHMEM(from,atype)\
^
ERROR: space required after that ',' (ctx:VxV)
+#define WRITESHM(to,from,atype) \
^
ERROR: space required after that ',' (ctx:VxV)
+#define WRITESHM(to,from,atype) \
^
ERROR: space required after that ',' (ctx:VxO)
+ memcpy_toio(&(to),&tmpSHM,sizeof(atype));\
^
ERROR: space required before that '&' (ctx:OxV)
+ memcpy_toio(&(to),&tmpSHM,sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+ memcpy_toio(&(to),&tmpSHM,sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \
^
ERROR: space required after that ',' (ctx:VxV)
+#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \
^
ERROR: space required after that ',' (ctx:VxV)
+#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \
^
ERROR: space required after that ',' (ctx:VxO)
+ memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\
^
ERROR: space required before that '&' (ctx:OxV)
+ memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+ memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+ IFDEBUG(levelSHM) printk(stringSHM,tmpSHM);\
^
ERROR: space required after that ',' (ctx:VxO)
+ writeb(val,&(to))
^
ERROR: space required before that '&' (ctx:OxV)
+ writeb(val,&(to))
^
ERROR: space required after that ',' (ctx:VxO)
+ writew(val,&(to))
^
ERROR: space required before that '&' (ctx:OxV)
+ writew(val,&(to))
^
ERROR: space required after that ',' (ctx:VxO)
+ writel(val,&(to))
^
ERROR: space required before that '&' (ctx:OxV)
+ writel(val,&(to))
^
ERROR: space prohibited after that open parenthesis '('
+ ( ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationMode) > 0) && \
ERROR: space prohibited after that open parenthesis '('
+ ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationStatus) == 0) )
ERROR: space prohibited before that close parenthesis ')'
+ ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationStatus) == 0) )
ERROR: code indent should use tabs where possible
+ ^IREADSHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage)$
ERROR: space required before the open brace '{'
+#define writeControlRegister(dev, v){\
ERROR: space required after that ',' (ctx:WxV)
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\
^
ERROR: need consistent spacing around '&' (ctx:WxV)
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\
^
ERROR: space prohibited before that close parenthesis ')'
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\
ERROR: space required after that ',' (ctx:WxV)
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );}
^
ERROR: space required after that ';' (ctx:VxV)
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );}
^
ERROR: space prohibited before that close parenthesis ')'
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );}
WARNING: suspect code indent for conditional statements (3, 6)
+ if (cr & ARLAN_CHANNEL_ATTENTION){ \
+ writeControlRegister(dev, (cr & ~ARLAN_CHANNEL_ATTENTION));\
ERROR: space required before the open brace '{'
+ if (cr & ARLAN_CHANNEL_ATTENTION){ \
ERROR: space required after that close brace '}'
+ }else \
ERROR: space required before the open brace '{'
+#define clearChannelAttention(dev){ \
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CHANNEL_ATTENTION);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CHANNEL_ATTENTION);}
^
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_RESET);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_RESET);}
^
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_RESET);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_RESET);}
^
ERROR: space required before the open brace '{'
+#define setInterruptEnable(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_INTERRUPT_ENABLE) ;}
^
ERROR: space required after that ';' (ctx:WxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_INTERRUPT_ENABLE) ;}
^
ERROR: space required before the open brace '{'
+#define clearInterruptEnable(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_INTERRUPT_ENABLE) ;}
^
ERROR: space required after that ';' (ctx:WxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_INTERRUPT_ENABLE) ;}
^
ERROR: space required before the open brace '{'
+#define setClearInterrupt(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_CLEAR_INTERRUPT) ;}
^
ERROR: space required after that ';' (ctx:WxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_CLEAR_INTERRUPT) ;}
^
ERROR: space required before the open brace '{'
+#define clearClearInterrupt(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CLEAR_INTERRUPT);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CLEAR_INTERRUPT);}
^
ERROR: space required before the open brace '{'
+#define setPowerOff(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | (ARLAN_POWER && ARLAN_ACCESS));\
^
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
^
ERROR: space required before the open brace '{'
+#define setPowerOn(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~(ARLAN_POWER)); }
^
ERROR: space required before the open brace '{'
+#define arlan_lock_card_access(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
^
ERROR: space required before the open brace '{'
+#define arlan_unlock_card_access(dev){\
ERROR: trailing whitespace
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); } $
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); }
^
ERROR: space prohibited before that close parenthesis ')'
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); }
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ $
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: code indent should use tabs where possible
+ 0 = [-10,10]$
ERROR: code indent should use tabs where possible
+ 0 = [-10,10]$
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & (DT_S_COMPOSITE_ERROR | DT_S_READY)) {
+ return stat;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & DT_S_COMPOSITE_ERROR) {
+ return stat;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & DT_S_READY) {
+ return 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & DT_S_COMPOSITE_ERROR) {
+ return stat;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & DT_S_READY) {
+ return 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (!(stat & DT_S_READY)) {
+ printk("dt2801: !ready in dt2801_writecmd(), ignoring\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (!timeout) {
+ printk("dt2801: timeout 1 status=0x%02x\n", stat);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (!timeout) {
+ printk("dt2801: timeout 2 status=0x%02x\n", stat);
+ }
WARNING: braces {} are not necessary for any arm of this statement
+ if (stat == -ETIME) {
[...]
+ } else {
[...]
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for any arm of this statement
+ if (data[0] == COMEDI_OUTPUT) {
[...]
+ } else {
[...]
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for single statement blocks
+ if (fifo_empty) {
+ break;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (irq) {
+ printk(", irq %u", irq);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: Macros with complex values should be enclosed in parenthesis
+#define N_WORDS 3000*64
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: do not initialise statics to 0 or NULL
+static unsigned int ui_Temp = 0;
WARNING: braces {} are not necessary for any arm of this statement
+ if (data[1]) {
[...]
+ } else
[...]
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < devpriv->ui_AiNbrofChannels; i++) {
+ devpriv->ui_AiChannelList[i] = data[4 + i];
+ }
ERROR: that open brace { should be on the previous line
+ } else /* EOC */
+ {
WARNING: braces {} are not necessary for any arm of this statement
+ if (data[1]) {
[...]
+ } else {
[...]
ERROR: that open brace { should be on the previous line
+ if (insn->unused[0] == 222) /* second insn read */
+ {
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < insn->n; i++) {
+ data[i] = devpriv->ui_AiReadData[i];
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) {
+ err++;
+ }
ERROR: that open brace { should be on the previous line
+ if (cmd->scan_begin_src == TRIG_TIMER) /* Test Delay timing */
+ {
ERROR: that open brace { should be on the previous line
+ if (cmd->convert_src == TRIG_TIMER) /* Test Acquisition timing */
+ {
WARNING: braces {} are not necessary for any arm of this statement
+ if (cmd->stop_src == TRIG_COUNT) {
[...]
+ } else {
[...]
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->b_ExttrigEnable == APCI3120_ENABLE) {
+ i_APCI3120_ExttrigEnable(dev); /* activate EXT trigger */
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (dmalen0 > (devpriv->ui_AiDataLength)) {
+ dmalen0 = devpriv->ui_AiDataLength;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (dmalen1 > (devpriv->ui_AiDataLength)) {
+ dmalen1 = devpriv->ui_AiDataLength;
+ }
WARNING: braces {} are not necessary for any arm of this statement
+ if (CR_RANGE(chanlist[i]) < APCI3120_BIPOLAR_RANGES) {
[...]
+ } else {
[...]
ERROR: that open brace { should be on the previous line
+ if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) /* enable this in without DMA ??? */
+ {
ERROR: that open brace { should be on the previous line
+ if (data[0] == APCI3120_TIMER) /* initialize timer */
+ {
ERROR: that open brace { should be on the previous line
+ } else /* Initialize Watch dog */
+ {
ERROR: that open brace { should be on the previous line
+ if (data[0] == 2) /* write new value */
+ {
ERROR: that open brace { should be on the previous line
+ if (devpriv->b_Timer2Mode == APCI3120_TIMER) /* start timer */
+ {
ERROR: that open brace { should be on the previous line
+ } else /* start watch dog */
+ {
ERROR: that open brace { should be on the previous line
+ if (devpriv->b_Timer2Mode == APCI3120_TIMER) /* start timer */
+ {
ERROR: that open brace { should be on the previous line
+ } else /* Read watch dog status */
+ {
WARNING: braces {} are not necessary for single statement blocks
+ if (!devpriv->b_OutputMemoryStatus) {
+ ui_Temp = 0;
+
+ } /* if(!devpriv->b_OutputMemoryStatus ) */
ERROR: code indent should use tabs where possible
+ data[0] Value to be written$
ERROR: code indent should use tabs where possible
+ data[1] :1 Set digital o/p ON$
ERROR: code indent should use tabs where possible
+ data[1] 2 Set digital o/p OFF with memory ON$
ERROR: that open brace { should be on the previous line
+ if (ui_Range) /* if 1 then unipolar */
+ {
ERROR: that open brace { should be on the previous line
+ } else /* if 0 then bipolar */
+ {
ERROR: that open brace { should be on the previous line
+ do /* Waiting of DA_READY BIT */
+ {
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: code indent should use tabs where possible
+ NONE$
ERROR: do not initialise statics to 0 or NULL
+static struct pcmcia_device *cur_dev = NULL;
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for single statement blocks
+ if (dev->iobase) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for any arm of this statement
+ if (it->options[2]) {
[...]
+ } else {
[...]
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->registers) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for any arm of this statement
+ if (thisboard->has_dio) {
[...]
+ } else {
[...]
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->BADR0) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->dio_reg_base) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < thisboard->n_8255; i++) {
+ subdev_8255_cleanup(dev, dev->subdevices + i);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->dac) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (inw_p(devpriv->dac + DACALIBRATION1) & SERIAL_OUT_BIT) {
+ value |= 1 << (value_width - i);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < max_num_caldacs; i++) {
+ cal2_bits |= DESELECT_CALDAC_BIT(i);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < max_num_caldacs; i++) {
+ cal2_bits |= DESELECT_CALDAC_BIT(i);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: "foo * bar" should be "foo *bar"
+ uint8_t * data);
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->s5933_config) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (cmd->stop_src == TRIG_COUNT) {
+ devpriv->count = cmd->chanlist_len * cmd->stop_arg;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (cmd->stop_src == TRIG_COUNT) {
+ devpriv->ao_count = cmd->chanlist_len * cmd->stop_arg;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (cmd->stop_src == TRIG_COUNT) {
+ devpriv->ao_count -= num_points;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (dev->attached == 0) {
+ return IRQ_NONE;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if ((status & (INT | EOAI | LADFUL | DAHFI | DAEMI)) == 0) {
+ comedi_error(dev, "spurious interrupt");
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (status & (DAHFI | DAEMI)) {
+ handle_ao_interrupt(dev, status);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (async->cmd.stop_src == TRIG_COUNT) {
+ devpriv->ao_count -= num_points;
+ }
ERROR: "foo * bar" should be "foo *bar"
+ uint8_t * data)
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: do not initialise externals to 0 or NULL
+unsigned int ui_InterruptStatus = 0;
WARNING: braces {} are not necessary for single statement blocks
+ else {
+ outl(0x6, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
+ } /* else if(data[1] == ADDIDATA_OR) */
WARNING: braces {} are not necessary for single statement blocks
+ if (data[1] == 1) {
+ *data = ui_InterruptStatus;
+ } /* if(data[1]==1) */
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: code indent should use tabs where possible
+ const struct comedi_lrange *pr_AiRangelist;^I/* rangelist for A/D */$
ERROR: code indent should use tabs where possible
+ const struct comedi_lrange *pr_AoRangelist;^I/* rangelist for D/A */$
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for any arm of this statement
+ if (i_Counter == 0) {
[...]
+ } else {
[...]
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
BKL isn't anymore present into these files thus it is no necessary still include smp_lock.h.
Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
according to 'linux device drivers',
ENOENT, ECONNRESET, ESHUTDOWN are not real transmission errors.
also, a little cosmetics.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Because the Firmware is loaded from RTL8192SU/rtl8192sfw.bin,
it it save, to remove it from r8192SU_HWImg.c
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch does following improvements:
1. Follow kernel style for comments
2. Reorganize code for readability improvement
3. Use PCI helper macros
4. Use __devinit, __devexit, __devexit_p at necessary places
5. Mark functions and data as static when it is not exported
Signed-off-by: Ameya Palande <2ameya@gmail.com>
Cc: Naren Sankar <nsankar@broadcom.com>
Cc: Jarod Wilson <jarod@wilsonet.com>
Cc: Scott Davilla <davilla@4pi.com>
Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the prism2usb.c that fixes one line which was over
the 80 character limit by wrapping it to a new line and removes a
commented out configuration for a ZyDAS ZD1201 device since support for
this device with this driver is now deprecated.
Signed-off-by: Jim Dog <jimdog@northern-indymedia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sparse warns that:
drivers/staging/pohmelfs/inode.c:1797: warning: initialization from incompatible pointer type
so fix pohmelfs_write_inode() to have the expected parameters.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix prism2fw.c printk format warning:
drivers/staging/wlan-ng/prism2fw.c:209: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The rtl8192* drivers in staging use semaphores, so they need
to #include <linux/semaphore.h>.
(similar to staging-rtl8187se-needs-semaphore.h.patch)
drivers/staging/rtl8192e/ieee80211/ieee80211.h:2038: error: field 'ips_sem' has incomplete type
drivers/staging/rtl8192e/ieee80211/ieee80211.h:2249: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8192e/ieee80211/ieee80211.h:2250: error: field 'scan_sem' has incomplete type
drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c:442: error: implicit declaration of function 'down'
drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c:500: error: implicit declaration of function 'up'
drivers/staging/rtl8192e/ieee80 211/ieee80211_softmac.c:3165: error: implicit declaration of function 'sema_init'
drivers/staging/rtl8192su/ieee80211/ieee80211.h:1330: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8192su/ieee80211/ieee80211.h:1331: error: field 'scan_sem' has incomplete type
drivers/staging/rtl8192u/ieee80211/ieee80211.h:2010: error: field 'wx_sem' has incomplete type
drivers/staging/rtl8192u/ieee80211/ieee80211.h:2011: error: field 'scan_sem' has incomplete type
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Increased timeout for digital output dma loading, due to report of it
being too short for some hardware.
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the amplc_pc236 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the amplc_dio200 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the aio_iiro_16 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
