Commit Graph

13 Commits

Author SHA1 Message Date
Nicolas Pitre
c1191b0e3b [ARM] Kirkwood: create a mapping for the Security Accelerator SRAM
Always creating the physical mapping should do no harm, so let's remove
the interface that was provided for its optional creation and make the
mapping static.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:05:02 -04:00
Nicolas Pitre
fb7b2d3f0d [ARM] Kirkwood: rationalize NAND setup a bit
Common resource and platform device structures are moved to common.c
and only the partition table and chip delay remains a per board
parameter.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-08 13:04:58 -04:00
Martin Michlmayr
586dcf279b [ARM] Kirkwood: Add support for QNAP TS-119/TS-219 Turbo NAS
Add support for the QNAP TS-119 and TS-219 Turbo NAS devices.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-23 16:12:38 -04:00
Martin Michlmayr
6574e001b4 [ARM] Kirkwood: Hook up I2C
Hook up I2C on Marvell Kirkwood.  Tested on a QNAP TS-219 which has
RTC connected through I2C.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-23 14:42:00 -04:00
Nicolas Pitre
5b99d53483 [ARM] Kirkwood: register internal devices in a common place
The RTC and the two XOR engines are internal to the chip, and therefore
always available since they don't depend on a particular board layout.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-02-26 22:55:59 -05:00
Nicolas Pitre
8235ee009c [ARM] Kirkwood: SDIO driver registration for DB6281 and RD6281
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-02-26 20:22:26 -05:00
Ronen Shitrit
d15fb9efe9 [ARM] Kirkwood: allow instantiating the second ethernet port
The 88f6192 and 88f6281 Kirkwood SoCs support two ethernet ports.
Add the platform glue that will allow board support files to
instantiate the second ethernet port.

Signed-off-by: Ronen Shitrit <rshitrit@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-12-11 16:39:08 -05:00
Lennert Buytenhek
dcf1cece14 [ARM] Orion: instantiate the dsa switch driver
This adds DSA switch instantiation hooks to the orion5x and the
kirkwood ARM SoC platform code, and instantiates the DSA switch
driver on the 88F5181L FXO RD, the 88F5181L GE RD, the 6183 AP GE
RD, the Linksys WRT350n v2, and the 88F6281 RD boards.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Nicolas Pitre <nico@marvell.com>
Tested-by: Peter van Valderen <linux@ddcrew.com>
Tested-by: Dirk Teurlings <dirk@upexia.nl>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-10-19 14:29:05 -04:00
Lennert Buytenhek
2d0c9e735a [ARM] Kirkwood: allow configuring mbus window for on-chip sram
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-25 16:27:22 -04:00
Ronen Shitrit
b2b3dc2fc4 [ARM] Kirkwood: add support for newer SoC models
Add support to the Kirkwood port for newer device models and silicon
revisions.  Instead of looking at the DEVICE_ID register, the device
version is now determined by looking at the PCI-Express device ID and
revision registers, as it is done for orion5x, and this information
is used to determine the TCLK frequency, again, as it is done for
orion5x.

Signed-off-by: Ronen Shitrit <rshitrit@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-25 16:27:21 -04:00
Lennert Buytenhek
18365d181f [ARM] Kirkwood: instantiate the orion_spi driver in the platform code
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-08-09 15:38:18 +02:00
Saeed Bishara
09c0ed2e6e [ARM] Kirkwood: Instantiate mv_xor driver
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-08-09 15:17:29 +02:00
Saeed Bishara
651c74c74b [ARM] add Marvell Kirkwood (88F6000) SoC support
The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a
Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface,
a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS
interface, and IDMA/XOR engines, and depending on the model, also
features one or two Gigabit Ethernet interfaces, two SATA II
interfaces, one or two TWSI interfaces, one or two UARTs, a
TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and
an SDIO interface.

This patch adds supports for the Marvell DB-88F6281-BP Development
Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs,
enabling support for the PCIe interface, the USB interface, the
ethernet interfaces, the SATA interfaces, the TWSI interfaces, the
UARTs, and the NAND controller.

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22 22:45:06 +02:00