Definitions for CEX3 card types are changed to support 4096 bit RSA
keys. Also new structs for the accelerator mode are needed.
Additionaly when checking the length of key parts, the case for bigger
(4096 bit) keys is needed.
Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Implemented an asm in the ap bus and made it accessible for the card
specific parts of the zcrypt driver. Thus when a cex3a is recognized
a check can be performed to dermine whether the card supports 4096 bit
RSA keys.
Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently the buffer for diagnose data is allocated in the open function
of the debugfs file and is released in the close function. This has the
drawback that a user (root) can pin that memory by not closing the file.
This patch moves the buffer allocation to the read function. The buffer is
automatically released after the buffer is copied to userspace.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Get rid of register/unregister_early_external_interrupt() and clean up
the code while at it.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use register_external_interrupt() instead of register_early_external_interrupt().
The early variant is not necessary since kmalloc works already.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use an early init call to initialize pfault. That way it is possible to
use the register_external_interrupt() instead of the early variant.
No need to enable pfault any earlier since it has only effect if user
space processes are running.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add support for ccw based tape I/O interrupt statistics in /proc/interrupts.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Count traditional qdio interrupts and adapter interrupts for qdio
in the interrupt statistics.
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Up to now /proc/interrupts only has statistics for external and i/o
interrupts but doesn't split up them any further.
This patch adds a line for every single interrupt source so that it
is possible to easier tell what the machine is/was doing.
Part of the output now looks like this;
CPU0 CPU2 CPU4
EXT: 3898 4232 2305
I/O: 782 315 245
CLK: 1029 1964 727 [EXT] Clock Comparator
IPI: 2868 2267 1577 [EXT] Signal Processor
TMR: 0 0 0 [EXT] CPU Timer
TAL: 0 0 0 [EXT] Timing Alert
PFL: 0 0 0 [EXT] Pseudo Page Fault
[...]
NMI: 0 1 1 [NMI] Machine Checks
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Let local_tick_enable/disable() reprogram the clock comparator so the
function names make semantically more sense.
Also that way the functions are more symmetric since normally each
local_tick_enable() call usually would have a subsequent call to
set_clock_comparator() anyway.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Move the two functions to timex.h where they make more sense than in
hardirq.h.
No functional change.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add kprobes annotations to get the massive 'probe kernel.function("*") {}'
stress test working.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Restructure the kprobe breakpoint handler function. Add comments to
make it more comprehensible and add a sanity check for re-entering
kprobes.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Register %r14 and %r15 are already stored in jprobe_saved_regs, no need
to store them a second time in jprobe_saved_r14 / jprobe_saved_r15.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The s390 architecture can execute code on kmalloc/vmalloc memory.
No need for the __ARCH_WANT_KPROBES_INSN_SLOT detour.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Replace set_current_kprobe/reset_current_kprobe/save_previous_kprobe/
restore_previous_kprobe with a simpler scheme push_kprobe/pop_kprobe.
The mini kprobes stack can store up to two active kprobes.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Determine instruction fixup details in resume_execution, no need to do
it beforehand. Remove fixup, ilen and reg from arch_specific_insn.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Move the definition of the helper structure ins_replace_args to the
only place where it is used and drop the old member as it is not needed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The saved interrupt mask and the saved control registers are only
relevant while single stepping is set up. A secondary kprobe while
kprobe single stepping is active may not occur. That makes is safe
to remove the save and restore of kprobe_saved_imask / kprobe_save_ctl
from save_previous_kprobe and restore_previous_kprobe.
Move all single step related code to two functions, enable_singlestep
and disable_singlestep.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove special case of a kprobe on a breakpoint while a relocated
instruction is single stepped. The only instruction that may cause
a fault while kprobe single stepping is active is the relocated
instruction. There is no kprobe on the instruction slot retrieved
with get_insn_slot().
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Make use of def_bool and def_tristate where possible and add sensible
defaults to the config symbols where applicable. This shortens the
defconfig file by another ~40 lines.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix the check for ap interupts to look for facility bits 2 and 65.
Make sure that we only register interrupts for aps, if the machine
has ap interrupt support.
This patch is relevant only for the 2.6.37 stable series.
Cc: stable@kernel.org
Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add a sched_clock() implementation to Versatile Express using the new
sched_clock() infrastructure for extending 32bit counters to full
64-bit nanoseconds.
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This reverts commit 3825bdb7ed.
You cannot dget() a dentry without having a reference, or holding
a lock that guarantees it remains valid.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Different sh-mobile SoCs have variations in their MIPI DSI register layouts,
besides, different LCD panels require different configuration parameters. This
patch switches the driver to use platform-provided MIPI DSI parameters.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Prepare the ap4evb board for the MIPI DSI driver transition to support
different register layouts.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The register layout of the MIPI DSI unit on sh-mobile SoCs differ. Add platform
parameters to support such variations.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Now, that the MIPI DSI driver implements runtime PM, we don't need anymore to
configure clocks statically in the platform code. This patch also adds a DSITX1
clock definition for sh7372 and attaches PHY clocks to respective devices.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
On SH-Mobile platforms using runtime PM with the MIPI DSI driver switches the
DSI Tx link clock on PM events.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Add VGA camera support to the Mackerel board
using soc_camera_platform.
The VGA camera module is hooked up using the
8-bit CEU bus, and it is constantly bursting
out frames in fixed video mode setting. The
camera module does not allow any I2C control.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
A definition like:
#define regs_return_value(regs) ((regs)->regs[0])
called with regs_return_value(foo) will be preprocessed to:
((foo)->foo[0])
^^^
So to fix this to ensure the preprocessor compiles such calls correctly.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Simplify the driver by removing the possibility to build it without the DMA
support and remove the respective Kconfig parameter.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Update copyright info in piggyback.c to include
info from piggyback_64.c.
Include my own copyright too.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Josip Rodin <joy@entuzijast.net>
Cc: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include an additional "Kernel is ready" print for zImage
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
