Commit Graph

1470 Commits

Author SHA1 Message Date
Linus Torvalds
e3ebadd95c Revert "[PATCH] x86: __pa and __pa_symbol address space separation"
This was broken.  It adds complexity, for no good reason.  Rather than
separate __pa() and __pa_symbol(), we should deprecate __pa_symbol(),
and preferably __pa() too - and just use "virt_to_phys()" instead, which
is more readable and has nicer semantics.

However, right now, just undo the separation, and make __pa_symbol() be
the exact same as __pa().  That fixes the bugs this patch introduced,
and we can do the fairly obvious cleanups later.

Do the new __phys_addr() function (which is now the actual workhorse for
the unified __pa()/__pa_symbol()) as a real external function, that way
all the potential issues with compile/link-time optimizations of
constant symbol addresses go away, and we can also, if we choose to, add
more sanity-checking of the argument.

Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 08:44:24 -07:00
Linus Torvalds
ea62ccd00f Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (231 commits)
  [PATCH] i386: Don't delete cpu_devs data to identify different x86 types in late_initcall
  [PATCH] i386: type may be unused
  [PATCH] i386: Some additional chipset register values validation.
  [PATCH] i386: Add missing !X86_PAE dependincy to the 2G/2G split.
  [PATCH] x86-64: Don't exclude asm-offsets.c in Documentation/dontdiff
  [PATCH] i386: avoid redundant preempt_disable in __unlazy_fpu
  [PATCH] i386: white space fixes in i387.h
  [PATCH] i386: Drop noisy e820 debugging printks
  [PATCH] x86-64: Fix allnoconfig error in genapic_flat.c
  [PATCH] x86-64: Shut up warnings for vfat compat ioctls on other file systems
  [PATCH] x86-64: Share identical video.S between i386 and x86-64
  [PATCH] x86-64: Remove CONFIG_REORDER
  [PATCH] x86-64: Print type and size correctly for unknown compat ioctls
  [PATCH] i386: Remove copy_*_user BUG_ONs for (size < 0)
  [PATCH] i386: Little cleanups in smpboot.c
  [PATCH] x86-64: Don't enable NUMA for a single node in K8 NUMA scanning
  [PATCH] x86: Use RDTSCP for synchronous get_cycles if possible
  [PATCH] i386: Add X86_FEATURE_RDTSCP
  [PATCH] i386: Implement X86_FEATURE_SYNC_RDTSC on i386
  [PATCH] i386: Implement alternative_io for i386
  ...

Fix up trivial conflict in include/linux/highmem.h manually.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-05 14:55:20 -07:00
Linus Torvalds
89661adaae Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (59 commits)
  PCI: Free resource files in error path of pci_create_sysfs_dev_files()
  pci-quirks: disable MSI on RS400-200 and RS480
  PCI hotplug: Use menuconfig objects
  PCI: ZT5550 CPCI Hotplug driver fix
  PCI: rpaphp: Remove semaphores
  PCI: rpaphp: Ensure more pcibios_add/pcibios_remove symmetry
  PCI: rpaphp: Use pcibios_remove_pci_devices() symmetrically
  PCI: rpaphp: Document is_php_dn()
  PCI: rpaphp: Document find_php_slot()
  PCI: rpaphp: Rename rpaphp_register_pci_slot() to rpaphp_enable_slot()
  PCI: rpaphp: refactor tail call to rpaphp_register_slot()
  PCI: rpaphp: remove rpaphp_set_attention_status()
  PCI: rpaphp: remove print_slot_pci_funcs()
  PCI: rpaphp: Remove setup_pci_slot()
  PCI: rpaphp: remove a call that does nothing but a pointer lookup
  PCI: rpaphp: Remove another wrappered function
  PCI: rpaphp: Remve another call that is a wrapper
  PCI: rpaphp: remove a function that does nothing but wrap debug printks
  PCI: rpaphp: Remove un-needed goto
  PCI: rpaphp: Fix a memleak; slot->location string was never freed
  ...
2007-05-04 18:04:29 -07:00
Linus Torvalds
ded1504dfa Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Report the number of processors in PowerNow-k8 correctly
  [CPUFREQ] do not declare undefined functions
  [CPUFREQ] cleanup kconfig options
  [CPUFREQ] Longhaul - Revert Longhaul ver. 2
  [CPUFREQ] Remove deprecated /proc/acpi/processor/performance write support
  [CPUFREQ] Fix limited cpufreq when booted on battery
  Fix preemption warnings in speedstep-centrino.c
  [CPUFREQ] Longhaul - Correct PCI code
  [CPUFREQ] p4-clockmod: switch to rdmsr_on_cpu/wrmsr_on_cpu
2007-05-04 17:38:48 -07:00
Michael Ellerman
7fe3730de7 MSI: arch must connect the irq and the msi_desc
set_irq_msi() currently connects an irq_desc to an msi_desc. The archs call
it at some point in their setup routine, and then the generic code sets up the
reverse mapping from the msi_desc back to the irq.

set_irq_msi() should do both connections, making it the one and only call
required to connect an irq with it's MSI desc and vice versa.

The arch code MUST call set_irq_msi(), and it must do so only once it's sure
it's not going to fail the irq allocation.

Given that there's no need for the arch to return the irq anymore, the return
value from the arch setup routine just becomes 0 for success and anything else
for failure.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:38 -07:00
Dan Williams
f282b97021 msi: introduce ARCH_SUPPORTS_MSI Kconfig option (rev2)
Allows architectures to advertise that they support MSI rather than listing
each architecture as a PCI_MSI dependency.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:37 -07:00
Andi Kleen
f19cccf366 [PATCH] x86-64: Fix allnoconfig error in genapic_flat.c
Fix:

In file included from include2/asm/apic.h:5,
                 from include2/asm/smp.h:15,
                 from linux/arch/x86_64/kernel/genapic_flat.c:18:
linux/include/linux/pm.h: In function ‘call_platform_enable_wakeup’:
linux/include/linux/pm.h:331: error: ‘EIO’ undeclared (first use in this function)
linux/include/linux/pm.h:331: error: (Each undeclared identifier is reported only once
linux/include/linux/pm.h:331: error: for each function it appears in.)

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:21 +02:00
Andi Kleen
fac15a8e4d [PATCH] x86-64: Share identical video.S between i386 and x86-64
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:21 +02:00
Andi Kleen
2136220d00 [PATCH] x86-64: Remove CONFIG_REORDER
The option never worked well and functionlist wasn't well maintained.
Also it made the build very slow on many binutils version.

So just remove it.

Cc: arjan@linux.intel.com
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:21 +02:00
Andi Kleen
3bea9c9793 [PATCH] x86-64: Don't enable NUMA for a single node in K8 NUMA scanning
This was supposed to see the full memory on a ASUS A8SX motherboard
with 4GB RAM where the northbridge reports less memory, but it didn't
help there. But it's a reasonable change so let's include it anyways.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:21 +02:00
Andi Kleen
fa0a009109 [PATCH] x86-64: Drop -traditional for arch/x86_64/boot
Follows i386 and useful cleanup.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:20 +02:00
Andi Kleen
72b1b1d013 [PATCH] x86-64: Use symbolic CPU features in early CPUID check
Dead to magic numbers!

Generated code is the same.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:20 +02:00
David P. Reed
4637a74cf2 [PATCH] x86-64: Avoid overflows during apic timer calibration
- Use 64bit TSC calculations to avoid handling overflow
- Use 32bit unsigned arithmetic for the APIC timer. This
way overflows are handled correctly.
- Fix exit check of loop to account for apic timer counting down

Signed-off-by: dpreed@reed.com
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:20 +02:00
Andi Kleen
05cb007dac [PATCH] x86-64: Use the 32bit wd_ops for 64bit too.
This mainly removes a lot of code, replacing it with calls into the new 32bit
perfctr-watchdog.c

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:20 +02:00
Suresh Siddha
e3f1caeef9 [PATCH] x86-64: set node_possible_map at runtime - try 2
Set the node_possible_map at runtime on x86_64.  On a non NUMA system,
num_possible_nodes() will now say '1'.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
2007-05-02 19:27:20 +02:00
Tim Hockin
8a336b0a4b [PATCH] x86-64: Dynamically adjust machine check interval
Background:
 We've found that MCEs (specifically DRAM SBEs) tend to come in bunches,
 especially when we are trying really hard to stress the system out.  The
 current MCE poller uses a static interval which does not care whether it
 has or has not found MCEs recently.

Description:
 This patch makes the MCE poller adjust the polling interval dynamically.
 If we find an MCE, poll 2x faster (down to 10 ms).  When we stop finding
 MCEs, poll 2x slower (up to check_interval seconds).  The check_interval
 tunable becomes the max polling interval.  The "Machine check events
 logged" printk() is rate limited to the check_interval, which should be
 identical behavior to the old functionality.

Result:
 If you start to take a lot of correctable errors (not exceptions), you
 log them faster and more accurately (less chance of overflowing the MCA
 registers).  If you don't take a lot of errors, you will see no change.

Alternatives:
 I considered simply reducing the polling interval to 10 ms immediately
 and keeping it there as long as we continue to find errors.  This felt a
 bit heavy handed, but does perform significantly better for the default
 check_interval of 5 minutes (we're using a few seconds when testing for
 DRAM errors).  I could be convinced to go with this, if anyone felt it
 was not too aggressive.

Testing:
 I used an error-injecting DIMM to create lots of correctable DRAM errors
 and verified that the polling interval accelerates.  The printk() only
 happens once per check_interval seconds.

Patch:
 This patch is against 2.6.21-rc7.

Signed-Off-By: Tim Hockin <thockin@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:19 +02:00
Andrew Morton
425001fea7 [PATCH] x86-64: unexport cpu_llc_id
WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:cpu_llc_id from __ksymtab between '__ksymtab_cpu_llc_id' (at offset 0x4a0) and '__ksymtab_smp_num_siblings'

It is strange to export a __cpuinitdata symbols to modules, and no module
appears to use it anyway.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:19 +02:00
Andi Kleen
57a4f91ae5 [PATCH] x86-64: Auto compute __NR_syscall_max at compile time
No need to maintain it anymore

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:18 +02:00
Eric Dumazet
141a892f57 [PATCH] x86-64: move __vgetcpu_mode & __jiffies to the vsyscall_2 zone
We apparently hit the 1024 limit of vsyscall_0 zone when some debugging
options are set, or if __vsyscall_gtod_data is 64 bytes larger.

In order to save 128 bytes from the vsyscall_0 zone, we move __vgetcpu_mode
& __jiffies to vsyscall_2 zone where they really belong, since they are
used only from vgetcpu() (which is in this vsyscall_2 area).

After patch is applied, new layout is :

ffffffffff600000 T vgettimeofday
ffffffffff60004e t vsysc2
ffffffffff600140 t vread_hpet
ffffffffff600150 t vread_tsc
ffffffffff600180 D __vsyscall_gtod_data
ffffffffff600400 T vtime
ffffffffff600413 t vsysc1
ffffffffff600800 T vgetcpu
ffffffffff600870 D __vgetcpu_mode
ffffffffff600880 D __jiffies
ffffffffff600c00 T venosys_1

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:18 +02:00
Fernando Luis [** ISO-8859-1 charset **] VzquezCao
9062d888aa [PATCH] x86-64: __send_IPI_dest_field - x86_64
Implement __send_IPI_dest_field which can be used to send IPIs when the
"destination shorthand" field of the ICR is set to 00 (destination
field). Use it whenever possible.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:18 +02:00
Fernando Luis VazquezCao
3144c332fa [PATCH] x86-64: use safe_apic_wait_icr_idle in smpboot.c - x86_64
inquire_remote_apic is used for APIC debugging, so use
safe_apic_wait_icr_idle  instead of apic_wait_icr_idle to avoid possible
lockups when APIC delivery fails.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:17 +02:00
Fernando Luis VazquezCao
ea8c733b98 [PATCH] x86-64: use safe_apic_wait_icr_idle in smpboot.c - x86_64
The functionality provided by the new safe_apic_wait_icr_idle is being
open-coded all over "kernel/smpboot.c". Use safe_apic_wait_icr_idle
instead to consolidate code and ease maintenance.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:17 +02:00
Fernando Luis VazquezCao
8339e9fba3 [PATCH] x86-64: safe_apic_wait_icr_idle - x86_64
apic_wait_icr_idle looks like this:

static __inline__ void apic_wait_icr_idle(void)
{
  while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
    cpu_relax();
}

The busy loop in this function would not be problematic if the
corresponding status bit in the ICR were always updated, but that does
not seem to be the case under certain crash scenarios. Kdump uses an IPI
to stop the other CPUs in the event of a crash, but when any of the
other CPUs are locked-up inside the NMI handler the CPU that sends the
IPI will end up looping forever in the ICR check, effectively
hard-locking the whole system.

Quoting from Intel's "MultiProcessor Specification" (Version 1.4), B-3:

"A local APIC unit indicates successful dispatch of an IPI by
resetting the Delivery Status bit in the Interrupt Command
Register (ICR). The operating system polls the delivery status
bit after sending an INIT or STARTUP IPI until the command has
been dispatched.

A period of 20 microseconds should be sufficient for IPI dispatch
to complete under normal operating conditions. If the IPI is not
successfully dispatched, the operating system can abort the
command. Alternatively, the operating system can retry the IPI by
writing the lower 32-bit double word of the ICR. This “time-out”
mechanism can be implemented through an external interrupt, if
interrupts are enabled on the processor, or through execution of
an instruction or time-stamp counter spin loop."

Intel's documentation suggests the implementation of a time-out
mechanism, which, by the way, is already being open-coded in some parts
of the kernel that tinker with ICR.

Create a apic_wait_icr_idle replacement that implements the time-out
mechanism and that can be used to solve the aforementioned problem.

AK: moved both functions out of line
AK: Added improved loop from Keith Owens

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:17 +02:00
Bernhard Kaindl
3ebad59056 [PATCH] x86: Save and restore the fixed-range MTRRs of the BSP when suspending
Note: This patch didn'nt need an update since it's initial post.

Some BIOSes may modify fixed-range MTRRs in SMM, e.g. when they
transition the system into ACPI mode, which is entered thru an SMI,
triggered by Linux in acpi_enable().

SMIs which cause that Linux is interrupted and BIOS code is
executed (which may change e.g. fixed-range MTRRs) in SMM may
be raised by an embedded system controller which is often found
in notebooks also at other occasions.

If we would not update our copy of the fixed-range MTRRs before
suspending to RAM or to disk, restore_processor_state() would
set the fixed-range MTRRs of the BSP using old backup values
which may be outdated and this could cause the system to fail
later during resume.

This patch ensures that our copy of the fixed-range MTRRs
is updated when saving the boot processor state on suspend
to disk and suspend to RAM.

In combination with other patches this allows to fix s2ram
and s2disk on the Acer Ferrari 1000 notebook and at least
s2disk on the Acer Ferrari 5000 notebook.

Signed-off-by: Bernhard Kaindl <bk@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Dave Jones <davej@codemonkey.org.uk>
2007-05-02 19:27:17 +02:00
Bernhard Kaindl
2b1f6278d7 [PATCH] x86: Save the MTRRs of the BSP before booting an AP
Applied fix by Andew Morton:
http://lkml.org/lkml/2007/4/8/88 - Fix `make headers_check'.

AMD and Intel x86 CPU manuals state that it is the responsibility of
system software to initialize and maintain MTRR consistency across
all processors in Multi-Processing Environments.

Quote from page 188 of the AMD64 System Programming manual (Volume 2):

7.6.5 MTRRs in Multi-Processing Environments

"In multi-processing environments, the MTRRs located in all processors must
characterize memory in the same way. Generally, this means that identical
values are written to the MTRRs used by the processors." (short omission here)
"Failure to do so may result in coherency violations or loss of atomicity.
Processor implementations do not check the MTRR settings in other processors
to ensure consistency. It is the responsibility of system software to
initialize and maintain MTRR consistency across all processors."

Current Linux MTRR code already implements the above in the case that the
BIOS does not properly initialize MTRRs on the secondary processors,
but the case where the fixed-range MTRRs of the boot processor are changed
after Linux started to boot, before the initialsation of a secondary
processor, is not handled yet.

In this case, secondary processors are currently initialized by Linux
with MTRRs which the boot processor had very early, when mtrr_bp_init()
did run, but not with the MTRRs which the boot processor uses at the
time when that secondary processors is actually booted,
causing differing MTRR contents on the secondary processors.

Such situation happens on Acer Ferrari 1000 and 5000 notebooks where the
BIOS enables and sets AMD-specific IORR bits in the fixed-range MTRRs
of the boot processor when it transitions the system into ACPI mode.
The SMI handler of the BIOS does this in SMM, entered while Linux ACPI
code runs acpi_enable().

Other occasions where the SMI handler of the BIOS may change bits in
the MTRRs could occur as well. To initialize newly booted secodary
processors with the fixed-range MTRRs which the boot processor uses
at that time, this patch saves the fixed-range MTRRs of the boot
processor before new secondary processors are started. When the
secondary processors run their Linux initialisation code, their
fixed-range MTRRs will be updated with the saved fixed-range MTRRs.

If CONFIG_MTRR is not set, we define mtrr_save_state
as an empty statement because there is nothing to do.

Possible TODOs:

*) CPU-hotplugging outside of SMP suspend/resume is not yet tested
   with this patch.

*) If, even in this case, an AP never runs i386/do_boot_cpu or x86_64/cpu_up,
   then the calls to mtrr_save_state() could be replaced by calls to
   mtrr_save_fixed_ranges(NULL) and  mtrr_save_state() would not be
   needed.

   That would need either verification of the CPU-hotplug code or
   at least a test on a >2 CPU machine.

*) The MTRRs of other running processors are not yet checked at this
   time but it might be interesting to syncronize the MTTRs of all
   processors before booting. That would be an incremental patch,
   but of rather low priority since there is no machine known so
   far which would require this.

AK: moved prototypes on x86-64 around to fix warnings

Signed-off-by: Bernhard Kaindl <bk@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Dave Jones <davej@codemonkey.org.uk>
2007-05-02 19:27:17 +02:00
Jeremy Fitzhardinge
57decbda6a [PATCH] x86: update for i386 and x86-64 check_bugs
Remove spurious comments, headers and keywords from x86-64 bugs.[ch].

Use identify_boot_cpu()

AK: merged with other patch

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:16 +02:00
Jeremy Fitzhardinge
35c7422649 [PATCH] x86: deflate stack usage in lib/inflate.c
inflate_fixed and huft_build together use around 2.7k of stack.  When
using 4k stacks, I saw stack overflows from interrupts arriving while
unpacking the root initrd:

do_IRQ: stack overflow: 384
 [<c0106b64>] show_trace_log_lvl+0x1a/0x30
 [<c01075e6>] show_trace+0x12/0x14
 [<c010763f>] dump_stack+0x16/0x18
 [<c0107ca4>] do_IRQ+0x6d/0xd9
 [<c010202b>] xen_evtchn_do_upcall+0x6e/0xa2
 [<c0106781>] xen_hypervisor_callback+0x25/0x2c
 [<c010116c>] xen_restore_fl+0x27/0x29
 [<c0330f63>] _spin_unlock_irqrestore+0x4a/0x50
 [<c0117aab>] change_page_attr+0x577/0x584
 [<c0117b45>] kernel_map_pages+0x8d/0xb4
 [<c016a314>] cache_alloc_refill+0x53f/0x632
 [<c016a6c2>] __kmalloc+0xc1/0x10d
 [<c0463d34>] malloc+0x10/0x12
 [<c04641c1>] huft_build+0x2a7/0x5fa
 [<c04645a5>] inflate_fixed+0x91/0x136
 [<c04657e2>] unpack_to_rootfs+0x5f2/0x8c1
 [<c0465acf>] populate_rootfs+0x1e/0xe4

(This was under Xen, but there's no reason it couldn't happen on bare
  hardware.)

This patch mallocs the local variables, thereby reducing the stack
usage to sane levels.

Also, up the heap size for the kernel decompressor to deal with the
extra allocation.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Tim Yamin <plasmaroo@gentoo.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
2007-05-02 19:27:15 +02:00
James Puthukattukaran
82d1bb725e [PATCH] x86-64: x86-64 system crashes when no memory populating Node 0
I have a 4 socket AMD Operton system. The 2.6.18 kernel I have crashes
when there is no memory in node0.

AK: changed call to _nopanic

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:13 +02:00
Glauber de Oliveira Costa
1c3d99c11c [PATCH] x86-64: Fix x86_64 compilation with DEBUG_SIG on
Setting the DEBUG_SIG flag breaks compilation due to a wrong
struct access. Aditionally, it raises two warnings. This is one
patch to fix them all.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:13 +02:00
Jeremy Fitzhardinge
b6e3590f81 [PATCH] x86: Allow percpu variables to be page-aligned
Let's allow page-alignment in general for per-cpu data (wanted by Xen, and
Ingo suggested KVM as well).

Because larger alignments can use more room, we increase the max per-cpu
memory to 64k rather than 32k: it's getting a little tight.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:12 +02:00
Andi Kleen
f039b75471 [PATCH] x86: Don't use MWAIT on AMD Family 10
It doesn't put the CPU into deeper sleep states, so it's better to use the standard
idle loop to save power. But allow to reenable it anyways for benchmarking.

I also removed the obsolete idle=halt on i386

Cc: andreas.herrmann@amd.com

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:12 +02:00
Jeremy Fitzhardinge
c169859d6d [PATCH] x86-64: Clean up asm-x86_64/bugs.h
Most of asm-x86_64/bugs.h is code which should be in a C file, so put it there.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02 19:27:12 +02:00
Jan Beulich
b92e9fac40 [PATCH] x86: fix amd64-agp aperture validation
Under CONFIG_DISCONTIGMEM, assuming that a !pfn_valid() implies all
subsequent pfn-s are also invalid is wrong. Thus replace this by
explicitly checking against the E820 map.

AK: make e820 on x86-64 not initdata

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Mark Langsdorf <mark.langsdorf@amd.com>
2007-05-02 19:27:11 +02:00
Bernhard Walle
141f9cfe0a [PATCH] x86-64: Fix "Section mismatch" compile warning
Fix "Section mismatch" warnings in arch/x86_64/kernel/time.c

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:11 +02:00
Jan Beulich
dd4ecfc2b1 [PATCH] x86-64: adjust EDID retrieval
commit 5e518d7672 did the same change to
i386's variant.

With this change, i386's and x86-64's versions are identical, raising
the question whether the x86-64 one should go (just like there's only
one instance of edd.S).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:11 +02:00
Konrad Rzeszutek
ae32b1297a [PATCH] x86-64: Inhibit machine from asserting an NMI when doing Alt-SysRq-M operation.
This patch touches the NMI watchdog every MAX_ORDER_NR_PAGES
to inhibit the machine from triggering an NMI while the CPUs
are locked. This situation is happening on boxes with more
than 64CPUs and 128GB of RAM when Alt-SysRq-m is performed.

It has been succesfully tested for regression on uni, 2, 4, 8
32, and 64 CPU boxes with various memory configuration.

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:11 +02:00
Eric Dumazet
c8118c6c07 [PATCH] x86-64: vsyscall_gtod_data diet and vgettimeofday() fix
Current vsyscall_gtod_data is large (3 or 4 cache lines dirtied at timer
interrupt). We can shrink it to exactly 64 bytes (1 cache line on AMD64)

Instead of copying a whole struct clocksource, we copy only needed fields.

I deleted an unused field : offset_base

This patch fixes one oddity in vgettimeofday(): It can returns a timeval with
tv_usec = 1000000. Maybe not a bug, but why not doing the right thing ?

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:11 +02:00
Eric Dumazet
272a3713bb [PATCH] x86-64: fix vtime() vsyscall
There is a tiny probability that the return value from vtime(time_t *t) is
Signed-off-by: Andi Kleen <ak@suse.de>

different than the value stored in *t

Using a temporary variable solves the problem and gives a faster code.

   17:   48 85 ff                test   %rdi,%rdi
   1a:   48 8b 05 00 00 00 00    mov    0(%rip),%rax        #
__vsyscall_gtod_data.wall_time_tv.tv_sec
   21:   74 03                   je     26
   23:   48 89 07                mov    %rax,(%rdi)
   26:   c9                      leaveq
   27:   c3                      retq

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
2007-05-02 19:27:11 +02:00
Adrian Bunk
bd8559c38e [PATCH] x86: remove UNEXPECTED_IO_APIC()
Many years ago, UNEXPECTED_IO_APIC() contained printk()'s (but nothing more).

Now that it's completely empty for years, we can as well remove it.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:11 +02:00
Adrian Bunk
ca906e4231 [PATCH] x86: sys_ioperm() prototype cleanup
- there's no reason for duplicating the prototype from
  include/linux/syscalls.h in include/asm-x86_64/unistd.h
- every file should #include the headers containing the prototypes for
  it's global functions

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:10 +02:00
Christoph Lameter
2bff73830c [PATCH] x86-64: use lru instead of page->index and page->private for pgd lists management.
x86_64 currently simulates a list using the index and private fields of the
page struct.  Seems that the code was inherited from i386.  But x86_64 does
not use the slab to allocate pgds and pmds etc.  So the lru field is not
used by the slab and therefore available.

This patch uses standard list operations on page->lru to realize pgd
tracking.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:10 +02:00
Andi Kleen
b8716890f3 [PATCH] x86-64: Remove unused stext symbol
suggested by Jan Beulich

Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:10 +02:00
Jan Beulich
6fb14755a6 [PATCH] x86: tighten kernel image page access rights
On x86-64, kernel memory freed after init can be entirely unmapped instead
of just getting 'poisoned' by overwriting with a debug pattern.

On i386 and x86-64 (under CONFIG_DEBUG_RODATA), kernel text and bug table
can also be write-protected.

Compared to the first version, this one prevents re-creating deleted
mappings in the kernel image range on x86-64, if those got removed
previously. This, together with the original changes, prevents temporarily
having inconsistent mappings when cacheability attributes are being
changed on such pages (e.g. from AGP code). While on i386 such duplicate
mappings don't exist, the same change is done there, too, both for
consistency and because checking pte_present() before using various other
pte_XXX functions is a requirement anyway. At once, i386 code gets
adjusted to use pte_huge() instead of open coding this.

AK: split out cpa() changes

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:10 +02:00
Jan Beulich
d01ad8dd56 [PATCH] x86: Improve handling of kernel mappings in change_page_attr
Fix various broken corner cases in i386 and x86-64 change_page_attr.

AK: split off from tighten kernel image access rights

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:10 +02:00
Bernhard Walle
8f9aeca7a0 [PATCH] x86: add command line length to boot protocol
Because the command line is increased to 2048 characters after 2.6.21, it's
not possible for boot loaders and userspace tools to determine the length
of the command line the kernel can understand.  The benefit of knowing the
length is that users can be warned if the command line size is too long
which prevents surprise if things don't work after bootup.

This patch updates the boot protocol to contain a field called
"cmdline_size" that contain the length of the command line (excluding the
terminating zero).

The patch also adds missing fields (of protocol version 2.05) to the x86_64
setup code.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Alon Bar-Lev <alon.barlev@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:10 +02:00
Joerg Roedel
d824395c59 [PATCH] x86: remove constant_tsc reporting from /proc/cpuinfo' power flags
remove the reporting of the constant_tsc flag from the "power management"
field in /proc/cpuinfo.  The NULL value there was replaced by "" because
the former would result in a printout of [8] if the flag is set.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:09 +02:00
David Rientjes
382591d500 [PATCH] x86-64: fixed size remaining fake nodes
Extends the numa=fake x86_64 command-line option to split the remaining system
memory into nodes of fixed size.  Any leftover memory is allocated to a final
node unless the command-line ends with a comma.

For example:
  numa=fake=2*512,*128	gives two 512M nodes and the remaining system
			memory is split into nodes of 128M each.

This is beneficial for systems where the exact size of RAM is unknown or not
necessarily relevant, but the size of the remaining nodes to be allocated is
known based on their capacity for resource management.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:09 +02:00
David Rientjes
14694d736b [PATCH] x86-64: split remaining fake nodes equally
Extends the numa=fake x86_64 command-line option to split the remaining
system memory into equal-sized nodes.

For example:
numa=fake=2*512,4*	gives two 512M nodes and the remaining system
			memory is split into four approximately equal
			chunks.

This is beneficial for systems where the exact size of RAM is unknown or not
necessarily relevant, but the granularity with which nodes shall be allocated
is known.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:09 +02:00
David Rientjes
8b8ca80e19 [PATCH] x86-64: configurable fake numa node sizes
Extends the numa=fake x86_64 command-line option to allow for configurable
node sizes.  These nodes can be used in conjunction with cpusets for coarse
memory resource management.

The old command-line option is still supported:
  numa=fake=32	gives 32 fake NUMA nodes, ignoring the NUMA setup of the
		actual machine.

But now you may configure your system for the node sizes of your choice:
  numa=fake=2*512,1024,2*256
		gives two 512M nodes, one 1024M node, two 256M nodes, and
		the rest of system memory to a sixth node.

The existing hash function is maintained to support the various node sizes
that are possible with this implementation.

Each node of the same size receives roughly the same amount of available
pages, regardless of any reserved memory with its address range.  The total
available pages on the system is calculated and divided by the number of equal
nodes to allocate.  These nodes are then dynamically allocated and their
borders extended until such time as their number of available pages reaches
the required size.

Configurable node sizes are recommended when used in conjunction with cpusets
for memory control because it eliminates the overhead associated with scanning
the zonelists of many smaller full nodes on page_alloc().

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:09 +02:00
Adrian Bunk
786142fab8 [PATCH] x86-64: make simnow_init() static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
2007-05-02 19:27:09 +02:00