Commit Graph

178 Commits

Author SHA1 Message Date
Andrew Vasquez
15a3758dc9 [SCSI] qla2xxx: Update version number to 8.01.07-k1.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-26 09:26:57 -05:00
Andrew Vasquez
476e8978d9 [SCSI] qla2xxx: Properly re-enable EFT support after an ISP abort.
Software must explicitely re-enable extended firmware tracing
after any ISP abort condition.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-26 09:26:41 -05:00
Andrew Vasquez
9c06938aa4 [SCSI] qla2xxx: Correct PLOGI retry logic.
Original code attempts to retry PLOGIs to fcports that are
FCP_TARGETs only.  If the driver never performed a successful
PLOGI/PRLI, the port-type would never be assigned, and the
relogin logic would silently drop the request (and thus the port
would not be recognized and registered).

The fix is relatively straightforward, drop the FCP_TARGET-only
check.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-26 09:26:27 -05:00
Andrew Vasquez
c2602c48b5 [SCSI] qla2xxx: Update version number to 8.01.05-k4.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:30:41 -05:00
Vladislav Bolkhovitin
b0328beed0 [SCSI] qla2xxx: Fix to allow to reset devices using sg interface (sg_reset).
Currently it is impossible to reset provided by Qlogic QLA2xxx driver
SCSI devices externally using corresponding sg devices, particularly via
sg_reset utility, because qla2xxx driver in qla2xxx_eh_device_reset()
function checks if the input scsi_cmnd has its private data (CMD_SP())
attached. Then the found pointer isn't used anywhere inside of
qla2xxx_eh_device_reset(). If the RESET request comes from sg device, it
doesn't have such private data.

The attached patch removes check for non-NULL CMD_SP() from
qla2xxx_eh_device_reset(), hence allows to reset QLA2xxx's devices using
corresponding sg devices.

AV: change applies to bus/host reset handlers as well.

Signed-off-by: Vladislav Bolkhovitin <vst@vlnb.net>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:30:28 -05:00
Andrew Vasquez
45ebeb5605 [SCSI] qla2xxx: Log Trace/Diagonostic asynchronous events.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:30:10 -05:00
Shyam Sundar
b797b6de9d [SCSI] qla2xxx: Correct endianess problem while issuing a Marker IOCB on ISP24xx.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:29:45 -05:00
James Bottomley
c4e00fac42 Merge ../scsi-misc-2.6
Conflicts:

	drivers/scsi/nsp32.c
	drivers/scsi/pcmcia/nsp_cs.c

Removal of randomness flag conflicts with SA_ -> IRQF_ global
replacement.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-03 09:41:12 -05:00
Thomas Gleixner
1d6f359a2e [PATCH] irq-flags: scsi: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:53 -07:00
Adrian Bunk
413975a0f1 [SCSI] qla2xxx: make some more functions static
Make some needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30 21:34:18 -05:00
Jesper Juhl
900d9f9873 [SCSI] small whitespace cleanup for qlogic driver
Add a few spaces to MODULE_PARM_DESC() text for qla2xxx. Without these
spaces text runs together when modinfo prints the text.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30 21:30:01 -05:00
Adrian Bunk
0418726bb5 typo fixes: aquire -> acquire
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30 18:23:04 +02:00
James Bottomley
f28e71617d Merge ../linux-2.6/
Conflicts:

	drivers/scsi/aacraid/comminit.c

Fixed up by removing the now renamed CONFIG_IOMMU option from
aacraid

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 14:06:39 -04:00
Andrew Vasquez
76c1534e0b [SCSI] qla2xxx: Update version number to 8.01.05-k3.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:25:52 -05:00
Andrew Vasquez
3ea66e28c2 [SCSI] qla2xxx: Correctly set the firmware NOS/OLS timeout during initialization.
Original code incorrectly assigned it to the driver's
link-down-timeout value (a value in seconds).

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:25:34 -05:00
Andrew Vasquez
7ee6139709 [SCSI] qla2xxx: Convert from pci_module_init() to pci_register_driver().
Also remove qla2xxx_probe_one/qla2xxx_remove_one stubs previously
used with external firmware module loaders.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:25:18 -05:00
Andrew Vasquez
7d7abc77cc [SCSI] qla2xxx: Correct 'loop-down' determination logic in qla2x00_fw_ready().
As there is no point in failing the initialization process when
firmware informs the host software that it could not transition
beyond a CONFIG_WAIT nor WAIT_FOR_LOGIN state.  Previous logic
would mark such conditions as a general *failure* and subsequently
tear-down the scsi-host during initialization.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:25:00 -05:00
Andrew Vasquez
0181944fe6 [SCSI] qla2xxx: Add support for extended error logging.
Similar in form to QLogic's standard offering -- via
the 'extended_error_logging' module parameter.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:24:36 -05:00
Andrew Vasquez
744f11fdb1 [SCSI] qla2xxx: Cleanup DEBUG macro usage.
- macro usage statements should terminate with a ';'
- remove unused macros.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:24:07 -05:00
Andrew Vasquez
7469059d52 [SCSI] qla2xxx: Remove no-op IOCTL codes and macros.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:23:49 -05:00
Andrew Vasquez
7914d004bc [SCSI] qla2xxx: Create an VPD sysfs entry for supported ISPs only.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:22:57 -05:00
Andrew Vasquez
88729e53a4 [SCSI] qla2xxx: Add DMI (Diagnostics Monitoring Interface) support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:22:40 -05:00
Andrew Vasquez
8baa51a6f0 [SCSI] qla2xxx: Honour 'skip process-login' option during fabric-login IOCB.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:22:16 -05:00
Andrew Vasquez
d4c760c211 [SCSI] qla2xxx: Add NVRAM 'Disable Serdes' bit support.
The host section of ISP24xx NVRAMs contain a new bit which
allows a user to selectively disable ports of an HBA.  These
ports (hosts) will not be presented to the midlayer.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:21:55 -05:00
Andrew Vasquez
395e0808fa [SCSI] qla2xxx: Resync with latest HBA SSID specification -- 2.2j.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:21:25 -05:00
Andrew Vasquez
a7a167bf7e [SCSI] qla2xxx: Rework firmware-trace facilities.
- Defer firmware dump-data raw-to-textual conversion to
  user-space.
- Add module parameter (ql2xallocfwdump) to allow for per-HBA
  allocations of firmware dump memory.
- Dump request and response queue data as per firmware group
  request.
- Add extended firmware trace support for ISP24XX/ISP54XX chips.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 16:20:44 -05:00
Akinobu Mita
179e09172a [PATCH] drivers: use list_move()
This patch converts the combination of list_del(A) and list_add(A, B) to
list_move(A, B) under drivers/.

Acked-by: Corey Minyard <minyard@mvista.com>
Cc: Ben Collins <bcollins@debian.org>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Alasdair Kergon <dm-devel@redhat.com>
Cc: Gerd Knorr <kraxel@bytesex.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Pavlic <fpavlic@de.ibm.com>
Acked-by: Matthew Wilcox <matthew@wil.cx>
Cc: Andrew Vasquez <linux-driver@qlogic.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:18 -07:00
James Bottomley
f0cd91a68a Merge ../linux-2.6 2006-06-10 13:47:26 -05:00
Andrew Vasquez
818bf49352 [SCSI] qla2xxx: Update version number to 8.01.05-k2.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:50:47 -05:00
Andrew Vasquez
21333b4811 [SCSI] qla2xxx: Correct issue where driver improperly issued SNS commands in N2N topologies.
Semantic changes in ISP24xx firmware behaviour inadvertently
caused the driver to believe an F-port topology was present in an
N_port-to-N_port configuration.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:50:29 -05:00
Andrew Vasquez
d4e3e04d78 [SCSI] qla2xxx: Consolidate firmware-dump handling across ISPs.
Simplify and centralise buffer allocation/deallocation, as
there's no point in having two memory request methods.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:50:11 -05:00
Andrew Vasquez
cb63067a77 [SCSI] qla2xxx: Consolidate "qla2xxx" string usage to a #define.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:49:53 -05:00
Andrew Vasquez
47f5e069e4 [SCSI] qla2xxx: Use PCI_DEVICE() for pci_device_id definition.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:49:37 -05:00
Andrew Vasquez
441d107204 [SCSI] qla2xxx: Remove obsolete firmware-loader-module support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:49:13 -05:00
Andrew Vasquez
4971cd221a [SCSI] qla2xxx: Remove unused port-type RSCN handling code.
Expandind on the previous commit:

	commit 79f89a4296
	Author: andrew.vasquez@qlogic.com <andrew.vasquez@qlogic.com>
	Date:   Fri Jan 13 17:05:58 2006 -0800

	[SCSI] qla2xxx: Disable port-type RSCN handling via driver state-machine.

and given:

- the process-context requirements of the FC transport
  rport-APIs.
- lack of port-type RSCN processing logic for ISP24xx and newer
  chips.

it's time now to remove the state-machine logic from mainline.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:43:44 -05:00
Andrew Vasquez
75bc419070 [SCSI] qla2xxx: Drop unused driver cruft.
- structure definitions.
- structure members.
- #define's.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:43:22 -05:00
Andrew Vasquez
5341e868fb [SCSI] qla2xxx: Add support for alternate WWN NVRAM setting.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:42:43 -05:00
Andrew Vasquez
fd0e7e4dd5 [SCSI] qla2xxx: Correct endianess comparisons during ISP24xx NVRAM configuration.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:42:18 -05:00
Andrew Vasquez
ffb39f0324 [SCSI] qla2xxx: ABBA lock ordering fix.
In qla2x00_reset_chip the driver first takes the hardware lock,
and then later on takes the mbx lock.

In the mailbox_command code.. it goes the other way around.

Discovered with the lock validator.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:41:56 -05:00
Andrew Vasquez
d1c61909c0 [SCSI] qla2xxx: Update ISP24xx firwmare loading heuristics.
If firmware image is unavailable via request_firwmare(), then
attempt to load the image (likely out-of-date) stored in flash
memory.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:41:31 -05:00
Ravi Anand
ed17c71b5d [SCSI] qla2xxx: Use FW calculated residual count for underrun handling.
With ISP24XX and ISP54XX parts.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:41:02 -05:00
Ravi Anand
45aeaf1e8e [SCSI] qla2xxx: Add support for new flash part.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:40:41 -05:00
Ravi Anand
57680080ba [SCSI] qla2xxx: Don't wait for loop transition to complete if LOOP_DEAD state is attained.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:40:21 -05:00
Michael Reed
2ea0020250 [SCSI] qla2xxx: Correct eh_abort recovery logic.
Fix the driver to return SUCCESS if the firmware or driver doesn't
have a command to abort, i.e., it's already been returned.  Without
this patch, error recovery will take the target offline as it tries
harder and harder to get the driver to return the command it no longer
has.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-27 18:29:55 -05:00
Zach Brown
77347ff755 [SCSI] qla2xxx: only free_irq() after request_irq() succeeds
If qla2x00_probe_one() fails before calling request_irq() but gets to
qla2x00_free_device() then it will mistakenly try to free an irq it didn't
request.  It's chosing to free based on ha->pdev->irq which is always set.

host->irq is set after request_irq() succeeds so let's use that to decide
to free or not.

This was observed and tested when a silly set of circumstances lead to
firmware loading failing on a 2100.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19 20:52:13 -04:00
Matthew Dobson
93d2341c75 [PATCH] mempool: use mempool_create_slab_pool()
Modify well over a dozen mempool users to call mempool_create_slab_pool()
rather than calling mempool_create() with extra arguments, saving about 30
lines of code and increasing readability.

Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:00 -08:00
Andrew Vasquez
1757b67809 [SCSI] qla2xxx: Firmware updates.
Resync with latest 23xx firmware -- 3.03.20.
Resync with latest 24xx firmware -- 4.00.18.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12 09:44:17 -06:00
Andrew Vasquez
d584486a1c [SCSI] qla2xxx: Remove legacy ISP6312 firmware loader.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12 09:42:33 -06:00
andrew.vasquez@qlogic.com
9a52a57cb9 [SCSI] qla2xxx: Correct FCAL login retry logic for ISP24xx.
ISP24XX FW does not support Mbx 0x74 ie Login Local Port.
Added the equivalent code for ISP24XX ie to relogin in non
fabric case for ISP24XX use login iocb.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12 09:40:37 -06:00
andrew.vasquez@qlogic.com
4a59f71d7f [SCSI] qla2xxx: Further restrict ZIO mode support.
Only support ZIO mode 6 on specific ISP types.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12 09:40:13 -06:00