Commit Graph

32 Commits

Author SHA1 Message Date
Felipe Balbi
500fdf8bec usb: gadget: introduce gadget_is_dwc3()
... to check whether we're running on DesignWare
USB3 DRD Controller.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22 16:00:46 -07:00
Felipe Balbi
199e7edbb1 usb: gadget: chips: remove ifdef trickery
the gadget controller number is only used
during bind() to update descriptors and/or
check that a particular controller can support
a particular gadget driver.

Because of that, we can remove the ifdef
trickery as it's a rather small optimization
anyway.

While at that, also sort the entries
alphabetically and add a comment stating we
want to keep the list ordered alphabetically.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:31:05 -07:00
Seth Levy
ceb80363b2 USB: net2272: driver for PLX NET2272 USB device controller
This is based on the last release from PLX:
	http://www.plxtech.com/files/products/net2000/software/selectiontool/RE061204-net2272-linux2.6.18.tgz

I've managed to contact them and they've confirmed that this driver was
wholly written by PLX (Seth Levy).  While they have no problem with it
being merged (and they've already licensed it as GPL), they don't have
any interest in doing so themselves as this is an old part for them.

ADI has long had an add-on card which has this part on it, so we've been
keeping it up-to-date out of tree.  But now that PLX has confirmed the
source of the driver, we can can take the next step of cleaning it up and
getting it merged.

So here we are!  I've done quite a large clean up of the driver and
attempted to address all the common issues.  Hopefully in the process,
I haven't broken anything.  While it seems to still work with the board
that I have access to, it is not a PCI variant.  So I have not tested
any of the PCI logic myself (beyond clean compile).  Perhaps someone who
actually has a card and cares can do so.

I'll try to address further feedback, but don't expect miracles.  I'm
not really familiar with the part itself, just the platform glue.

Signed-off-by: Seth Levy <seth.levy@plxtech.com>
Signed-off-by: Ash Aziz <ash.aziz@plxtech.com>
Signed-off-by: Roy Huang <roy.huang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06 16:47:27 -07:00
Thomas Abraham
a9df304cf7 USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
The Samsung's S3C2416, S3C2443 and S3C2450 includes a USB High-Speed
device controller module. This driver enables support for USB high-speed
gadget functionality for the Samsung S3C24xx SoC's that include this
controller.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Alexander Neumann <alexander@bumpern.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-10 14:16:55 -07:00
Kuninori Morimoto
2f98382dcd usb: renesas_usbhs: Add Renesas USBHS Gadget
This patch add usb gadget code to SuperH USBHS.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13 16:07:07 -07:00
Russell King
82e6923e18 ARM: lh7a40x: remove unmaintained platform support
lh7a40x has only been receiving updates for updates to generic code.
The last involvement from the maintainer according to the git logs was
in 2006.  As such, it is a maintainence burden with no benefit.

This gets rid of two defconfigs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-24 19:05:19 +00:00
Greg Kroah-Hartman
5cdc5bd8b2 Merge branch 'musb-hw' of git://gitorious.org/usb/usb into musb
* 'musb-hw' of git://gitorious.org/usb/usb: (43 commits)
  usb: musb: core: kill unneeded #include's
  DA8xx: assign name to MUSB IRQ resource
  arm: OMAP4430: musb: Configure musb to OTG mode
  usb: musb: Adding musb support for OMAP4430
  usb: otg: TWL6030: Add twl6030_usb file for compilation
  mfd: TWL6030: OMAP4: Registering the TWL6030-usb device
  usb: musb: TWL6030: Selecting TWL6030_USB transceiver
  usb: otg: Kconfig: Add Kconfig option for TWL6030 transceiver.
  usb: otg: Adding twl6030-usb transceiver driver for OMAP4430
  mfd: TWL6030: USBOTG VBUS event generation on
  usb: musb: add support for ux500 platform
  musb: am35x: fix compile error due to control apis
  arm: omap4: enable usb on 4430sdp
  usb: musb: drop board_set_vbus
  usb: musb: drop musb_platform_suspend/resume
  usb: musb: blackfin: usb dev_pm_ops structure
  usb: musb: am35x: usb dev_pm_ops structure
  usb: musb: omap2430: use dev_pm_ops structure
  usb: musb: omap2430: drop the nops
  usb: musb: mark musb_save/restore_context static
  ...
2010-12-15 09:29:38 -08:00
Pavankumar Kondeti
33f82f387b USB: gadget: Add USB controller driver for MSM SoC
MSM SoC has chipidea USB controller. So use ci13xxx_udc core.
This driver depends on transceiver driver for clock control,
PHY initialization, VBUS detection.  Register for notify_event
callback to perform MSM specific quirks after controller is reset
and stopped.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-10 14:23:33 -08:00
Pavankumar Kondeti
409a15da98 USB: gadget: Separate out PCI bus code from ci13xxx_udc
Move PCI bus code from ci13xxx_udc to a new file ci13xxx_pci.  SoC's
which has MIPS USB core can include the ci13xxx_udc and keep bus glue
code in their respective gadget controller drivers.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-10 14:23:32 -08:00
Felipe Balbi
05ac10dd68 usb: musb: trivial search and replace patch
change all ocurrences of musb_hdrc to musb-hdrc.

We will call glue layer drivers musb-<glue layer>,
so in order to keep things somewhat standard, let's
change the underscore into a dash.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10 10:21:10 +02:00
Toshiharu Okada
f646cf9452 USB device driver of Topcliff PCH
This patch adds the USB device driver of EG20T(Topcliff) PCH.

EG20T PCH is the platform controller hub that is going to be used in
Intel's upcoming general embedded platform. All IO peripherals in
EG20T PCH are actually devices sitting on AMBA bus.
EG20T PCH has USB device I/F. Using this I/F, it is able to access system
devices connected to USB device.

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Acked-by: Michał Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-16 13:57:25 -08:00
Maurus Cuelenaere
83ba11d934 USB: gadget: add gadget controller number for s3c-hsotg driver
This prevents some drivers from complaining that no bcdDevice id was set.

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19 07:24:22 -07:00
Christoph Egger
90f7976880 USB: Remove unsupported usb gadget drivers
A bunch of USB gadget drivers where never ported from the linux 2.4
series to 2.6 kernels. However there's some code still in the tree for
them which isn't used and is probably untested for ages.

As the chance of these drivers being forward ported is probably quite
small now it might be time to get rid of them.

Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:54:57 -08:00
Yoshihiro Shimoda
c41442474a usb: gadget: R8A66597 peripheral controller support.
While in-tree support for the R8A66597 host side has been supported for
some time, the peripheral side has so far been unsupported. This adds a
new USB gadget driver which bridges the gap and finally wires up the
peripheral side as well.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Tested-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20 10:25:30 +09:00
Xiaochen Shen
5be19a9daa USB: Add Intel Langwell USB Device Controller driver
Intel Langwell USB Device Controller is a High-Speed USB OTG device
controller in Intel Moorestown platform. It can work in OTG device mode
with Intel Langwell USB OTG transceiver driver as well as device-only
mode. The number of programmable endpoints is different through
controller revision.

NOTE:
This patch is the first version Intel Langwell USB OTG device controller
driver. The bug fixing is on going for some hardware and software
issues.  Intel Langwell USB OTG transceiver driver and EHCI driver
patches will be submitted later.

Supported features:
 - USB OTG protocol support with Intel Langwell USB OTG transceiver
   driver (turn on CONFIG_USB_LANGWELL_OTG)
 - Support control, bulk, interrupt and isochronous endpoints
   (isochronous not tested)
 - PCI D0/D3 power management support
 - Link Power Management (LPM) support

Tested gadget drivers:
 - g_file_storage
 - g_ether
 - g_zero

The passed tests:
 - g_file_storage: USBCV Chapter 9 tests
 - g_file_storage: USBCV MSC tests
 - g_file_storage: from/to host files copying
 - g_ether: ping, ftp and scp files from/to host
 - Hotplug, with and without hubs

Known issues:
 - g_ether: failed part of USBCV chap9 tests
 - LPM support not fully tested

TODO:
 - g_ether: pass all USBCV chap9 tests
 - g_zero: pass usbtest tests
 - Stress tests on different gadget drivers
 - On-chip private SRAM caching support

Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:44:47 -07:00
Darius Augulis
2a4f136fbd USB: add imx udc gadget driver
Implementation of USB device driver integrated in Freescale's i.MXL
processor.

Adds USB device driver for i.MXL.

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 10:00:11 -08:00
David Lopo
aa69a8093f USB: gadget: MIPS ci13xxx_udc
MIPS USB IP core family device controller
Currently it only supports IP part number CI13412.

[dbrownell@users.sourceforge.net: minor comment tweaks]

Signed-off-by: David Lopo <dlopo@chipidea.mips.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 09:59:58 -08:00
Li Yang
3948f0e0c9 usb: add Freescale QE/CPM USB peripheral controller driver
Some of Freescale SoC chips have a QE or CPM co-processor which
supports full speed USB.  The driver adds device mode support
of both QE and CPM USB controller to Linux USB gadget.  The
driver is tested with MPC8360 and MPC8272, and should work with
other models having QE/CPM given minor tweaks.

Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:40:54 -07:00
Felipe Balbi
e67d70f2f5 usb: gadget: protect gadget_chips.h from been included twice
Without it, we might have trouble when trying to write
some composite gadget drivers.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13 17:32:49 -07:00
David Brownell
da741b8c56 usb ethernet gadget: split CDC Ethernet function
This is a "CDC Ethernet" (ECM) function driver, extracted from the
all-in-one Ethernet gadget driver.

This is a good example of how to implement interface altsettings.
In fact it's currently the only such example in the gadget stack,
pending addition of OBEX support.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:16:13 -07:00
Philipp Zabel
7a85762043 [ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers
The pxa2xx_udc.c driver is renamed to pxa25x_udc.c (the platform
driver name changes from pxa2xx-udc to pxa25x-udc) and the
platform driver name of pxa27x_udc.c is fixed to pxa27x-udc.
pxa_device_udc in devices.c is split into pxa25x and pxa27x flavors
and the pxa27x_device_udc is enabled in pxa27x.c.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Including from Ian Molton:

Fixes for mistakes left over from the PXA2{5,7}X UDC split.

Signed-off-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 21:30:13 +01:00
Yoshihiro Shimoda
598f22e11b USB: m66592-udc: fixes some problems
This patch incorporates some updates from the review of the
Renesas m66592-udc driver.  Updates include:

 - Fix some locking bugs; and add a few sparse annotations
 - Don't #define __iomem !
 - Lots of whitespace fixes (most of the patch by volume)
 - Some #include file trimmage
 - Other checkpatch.pl and sparse updates
 - Alphabetized and slightly-more-informative Kconfig
 - Don't use the ID which was assigned to the amd5536udc driver.
 - Remove pointless suspend/resume methods updating obsolete field.
 - Some section fixups
 - Fix some leak bugs
 - Fix byteswapping

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19 17:46:05 -07:00
Thomas Dahlmann
55d402d854 USB: amd5536 UDC driver (in GEODE southbridge)
Driver for the AMD5536 UDC, as found in the AMD Geode CS5536 (southbridge).
This is a high speed DMA-capable controller, which can also be used in
OTG configurations (which are not supported by this patch).

Acked-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-19 17:46:05 -07:00
Haavard Skinnemoen
55b3fd41b0 usb gadget: Rename husb2dev -> usba
husb2dev was the internal name of the USB Device Controller on
AT32AP7000. Rename it to "atmel_usba", which is closer to the official
name used in documentation and marketing material.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12 16:34:38 -07:00
David Brownell
7f9985c2e4 USB: usb gadget, dead config cleanup
Remove some dead CONFIG_ symbols, and document the status of a few others.
The "gadget_chips.h" references are by and large to drivers which exist
but haven't yet been submitted for merging to the main 2.6 tree.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12 16:29:48 -07:00
Yoshihiro Shimoda
4cf2503c68 USB: m66592-udc: peripheral controller driver for M66592
I would like to submit Renesas M66592 udc driver.

The M66592 is Renesas USB 2.0 peripheral controller.
This controller supports USB high-speed.

The driver has been tested Gadget Zero, Ethernet Gadget,
File-backed Storage Gadget, and passed usbtest script.

Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12 16:29:45 -07:00
Li Yang
d2eef1fc99 USB: update gadget files for fsl_usb2_udc driver
Update gadget_chip.c, ether.c for newly added Freescale Highspeed USB
device driver.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 13:28:43 -07:00
Hvard Skinnemoen
1f5b9cc9e4 USB: list atmel husb2_udc gadget controller
This identifies the driver for the Atmel HUSB2 Device Controller,
as integrated into the first AVR32 chip, the AT32AP700.

From: Hvard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:39 -08:00
David Brownell
42795410c3 [PATCH] USB: fix gadget_is_musbhdrc()
I submitted the wrong version of the patch teaching about the driver
for Mentor's Highspeed Dual Role Controller (HDRC), whoops!  This
uses the right name for that driver.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:24 -07:00
David Brownell
1c05ad4447 [PATCH] recognize three more usb peripheral controllers
This adds declarations for three USB peripheral controllers:

  - Two high speed USB cores that can be licensed from Mentor Graphics
    to be integrated into silicon:

      * "musbhsfc" is for peripherals only, as found in for example the
        IBM/AMCC 44EP processors.

      * "musbhdrc" is OTG-capable (dual role), and is found in various
        products including OMAP 2430 and the new DaVinci SOCs.

    The "musbh" standing for "Mentor USB Highspeed", the rest standing
    for "Function Controller" or "Dual Role Controller" (OTG-capable).

  - The full speed controller on the FreeScale MPC8272.

Adding these definitions just allows gadget driver code to handle any
controller-specific logic; controller drivers are quite separate.

Signed-off-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:49:56 -08:00
David Brownell
91e79c91fa [PATCH] USB: Gadget library: centralize gadget controller numbers
This patch centralizes the assignment of bcdDevice numbers for different
gadget controllers.  This won't improve the object code at all, but it
does save a lot of repetitive and error-prone source code ... and will
simplify the work of supporting a new controller driver, since most new
gadget drivers will no longer need patches (unless some hardware quirks
limit USB protocol messaging).

Added minor cleanups and identifer hooks for the UDC in the Freescale
iMX series processors.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 16:22:16 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00