Commit Graph

822 Commits

Author SHA1 Message Date
Will Deacon
ccdf2e1bca ARM: 6412/1: kprobes-decode: add support for MOVW instruction
The MOVW instruction moves a 16-bit immediate into the bottom halfword
of the destination register.

This patch ensures that kprobes leaves the 16-bit immediate intact, rather
than assume a 12-bit immediate and mask out the upper 4 bits.

Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04 19:21:37 +01:00
Linus Torvalds
6e029fe373 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits)
  ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
  ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE
  ARM: 6408/1: omap: Map only available sram memory
  ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries
  ARM: pxa: remove pr_<level> uses of KERN_<level>
  ARM: pxa168fb: clear enable bit when not active
  ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured
  ARM: pxa168: fix corrected reset vector
  ARM: pxa: Use PIO for PI2C communication on Palm27x
  ARM: pxa: Fix Vpac270 gpio_power for MMC
  ARM: 6401/1: plug a race in the alignment trap handler
  ARM: 6406/1: at91sam9g45: fix i2c bus speed
  leds: leds-ns2: fix locking
  ARM: dove: fix __io() definition to use bus based offset
  dmaengine: fix interrupt clearing for mv_xor
  ARM: kirkwood: Unbreak PCIe I/O port
  ARM: Fix build error when using KCONFIG_CONFIG
  ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing
  ARM: 6400/1: at91: fix arch_gettimeoffset fallout
  ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM
  ...
2010-09-27 12:32:36 -07:00
Al Viro
653d48b221 arm: fix really nasty sigreturn bug
If a signal hits us outside of a syscall and another gets delivered
when we are in sigreturn (e.g. because it had been in sa_mask for
the first one and got sent to us while we'd been in the first handler),
we have a chance of returning from the second handler to location one
insn prior to where we ought to return.  If r0 happens to contain -513
(-ERESTARTNOINTR), sigreturn will get confused into doing restart
syscall song and dance.

Incredible joy to debug, since it manifests as random, infrequent and
very hard to reproduce double execution of instructions in userland
code...

The fix is simple - mark it "don't bother with restarts" in wrapper,
i.e. set r8 to 0 in sys_sigreturn and sys_rt_sigreturn wrappers,
suppressing the syscall restart handling on return from these guys.
They can't legitimately return a restart-worthy error anyway.

Testcase:
	#include <unistd.h>
	#include <signal.h>
	#include <stdlib.h>
	#include <sys/time.h>
	#include <errno.h>

	void f(int n)
	{
		__asm__ __volatile__(
			"ldr r0, [%0]\n"
			"b 1f\n"
			"b 2f\n"
			"1:b .\n"
			"2:\n" : : "r"(&n));
	}

	void handler1(int sig) { }
	void handler2(int sig) { raise(1); }
	void handler3(int sig) { exit(0); }

	main()
	{
		struct sigaction s = {.sa_handler = handler2};
		struct itimerval t1 = { .it_value = {1} };
		struct itimerval t2 = { .it_value = {2} };

		signal(1, handler1);

		sigemptyset(&s.sa_mask);
		sigaddset(&s.sa_mask, 1);
		sigaction(SIGALRM, &s, NULL);

		signal(SIGVTALRM, handler3);

		setitimer(ITIMER_REAL, &t1, NULL);
		setitimer(ITIMER_VIRTUAL, &t2, NULL);

		f(-513); /* -ERESTARTNOINTR */

		write(1, "buggered\n", 9);
		return 1;
	}

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-17 10:22:18 -07:00
Russell King
b2b163bb82 ARM: prevent multiple syscall restarts
Al Viro reports that calling "sys_sigsuspend(-ERESTARTNOHAND, 0, 0)"
with two signals coming and being handled in kernel space results
in the syscall restart being done twice.

Avoid this by clearing the 'why' flag when we call the signal handling
code to prevent further syscall restarts after the first.

Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-17 14:56:16 +01:00
Will Deacon
65b4711ff5 ARM: 6352/1: perf: fix event validation
The validate_event function in the ARM perf events backend has the
following problems:

1.) Events that are disabled count towards the cost.
2.) Events associated with other PMUs [for example, software events or
    breakpoints] do not count towards the cost, but do fail validation,
    causing the group to fail.

This patch changes validate_event so that it ignores events in the
PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs.

Reported-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 16:36:42 +01:00
Mikael Pettersson
418cf646c9 ARM: 6343/1: wire up fanotify and prlimit64 syscalls on ARM
The 2.6.36-rc kernel added three new system calls:
fanotify_init, fanotify_mark, and prlimit64.  This patch
wires them up on ARM.

The only non-trivial issue here is the u64 argument to
sys_fanotify_mark(), but it is the 3rd argument and thus
passed in r2/r3 in both kernel and user space, so it causes
no problems.

Tested with a 2.6.36-rc2 EABI kernel on an ixp4xx machine.

Tested-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-01 10:06:08 +01:00
Will Deacon
25d3584797 ARM: 6330/1: perf: reword comments relating to perf_event_do_pending
This is purely a cosmetic change to the ARM perf backend because the current
comments about the relationship between NMIs, interrupt context and
perf_event_do_pending are misleading.

This patch updates the comments so that they reflect what the code
actually does (which is in line with other architectures).

Acked-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-01 10:06:08 +01:00
Linus Torvalds
2637d139fb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: pxa27x_keypad - remove input_free_device() in pxa27x_keypad_remove()
  Input: mousedev - fix regression of inverting axes
  Input: uinput - add devname alias to allow module on-demand load
  Input: hil_kbd - fix compile error
  USB: drop tty argument from usb_serial_handle_sysrq_char()
  Input: sysrq - drop tty argument form handle_sysrq()
  Input: sysrq - drop tty argument from sysrq ops handlers
2010-08-28 13:55:31 -07:00
Dmitry Torokhov
1495cc9df4 Input: sysrq - drop tty argument from sysrq ops handlers
Noone is using tty argument so let's get rid of it.

Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-19 22:07:06 -07:00
Linus Torvalds
2a6a432a9c Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  VIDEO: amba clcd: don't disable an already disabled clock
  ARM: Tighten check for allowable CPSR values
  ARM: 6329/1: wire up sys_accept4() on ARM
  ARM: 6328/1: Build with -fno-dwarf2-cfi-asm
  ARM: 6326/1: kgdb: fix GDB_MAX_REGS no longer used
2010-08-17 18:11:49 -07:00
David Howells
d7627467b7 Make do_execve() take a const filename pointer
Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17 18:07:43 -07:00
Mikael Pettersson
21d93e2e29 ARM: 6329/1: wire up sys_accept4() on ARM
sys_accept4() was added in kernel 2.6.28, but ARM was not updated
to include it.  The number and types of parameters is such that
no ARM-specific processing is needed, so wiring up sys_accept4()
just requires defining __NR_accept4 and adding a direct call in
the syscall entry table.

Tested with an EABI 2.6.35 kernel and Ulrich Drepper's original
accept4() test program, modified to define __NR_accept4 for ARM.

Using the updated unistd.h also eliminates a warning then building
glibc (2.10.2 and newer) about accept4() being unimplemented.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-15 22:04:23 +01:00
eric miao
2f174847b0 ARM: 6326/1: kgdb: fix GDB_MAX_REGS no longer used
According to commit 22eeef4bb2

    kgdb,arm: Individual register get/set for arm

It's now replaced by DBG_MAX_REG_NUM.

Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-14 09:28:35 +01:00
David Howells
c788732523 Mark arguments to certain syscalls as being const
Mark arguments to certain system calls as being const where they should be but
aren't.  The list includes:

 (*) The filename arguments of various stat syscalls, execve(), various utimes
     syscalls and some mount syscalls.

 (*) The filename arguments of some syscall helpers relating to the above.

 (*) The buffer argument of various write syscalls.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-13 16:53:13 -07:00
Russell King
0b019a4155 Merge branches 'master' and 'devel' into for-linus
Conflicts:
	arch/arm/Kconfig
	arch/arm/mm/Kconfig
2010-08-10 23:17:52 +01:00
Alexander Shishkin
988257cfcb ARM: 6294/1: etm: do a dummy read from OSSRR during initialization
The first read from ETM OS save and restore register after the power
down bit deassertion returns garbage.

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Alexander Shishkin <virtuoso@slind.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10 22:10:53 +01:00
Alexander Shishkin
9e354ea8e0 ARM: 6292/1: coresight: add ETM management registers
Add notion of ETM OS lock, save and restore registers.

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Alexander Shishkin <virtuoso@slind.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10 22:10:53 +01:00
Rabin Vincent
686ff22812 ARM: 6288/1: ftrace: document mcount formats
Add a comment describing the mcount variants and how the callsites look
like.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10 22:10:52 +01:00
Rabin Vincent
28e192d6e5 ARM: 6287/1: ftrace: clean up mcount assembly indentation
The mcount implementation currently uses a different indentation style
from the rest of the file (and the rest of the ARM assembly in the
kernel).  Clean it up.

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10 22:10:52 +01:00
Russell King
054d5c9238 Merge branch 'devel-stable' into devel 2010-08-09 14:09:29 +01:00
Linus Torvalds
4aed2fd8e3 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
  tracing/kprobes: unregister_trace_probe needs to be called under mutex
  perf: expose event__process function
  perf events: Fix mmap offset determination
  perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
  perf, powerpc: Convert the FSL driver to use local64_t
  perf tools: Don't keep unreferenced maps when unmaps are detected
  perf session: Invalidate last_match when removing threads from rb_tree
  perf session: Free the ref_reloc_sym memory at the right place
  x86,mmiotrace: Add support for tracing STOS instruction
  perf, sched migration: Librarize task states and event headers helpers
  perf, sched migration: Librarize the GUI class
  perf, sched migration: Make the GUI class client agnostic
  perf, sched migration: Make it vertically scrollable
  perf, sched migration: Parameterize cpu height and spacing
  perf, sched migration: Fix key bindings
  perf, sched migration: Ignore unhandled task states
  perf, sched migration: Handle ignored migrate out events
  perf: New migration tool overview
  tracing: Drop cpparg() macro
  perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
  ...

Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
2010-08-06 09:30:52 -07:00
Linus Torvalds
89a6c8cb9e Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  debug_core,kdb: fix crash when arch does not have single step
  kgdb,x86: use macro HBP_NUM to replace magic number 4
  kgdb,mips: remove unused kgdb_cpu_doing_single_step operations
  mm,kdb,kgdb: Add a debug reference for the kdb kmap usage
  KGDB: Remove set but unused newPC
  ftrace,kdb: Allow dumping a specific cpu's buffer with ftdump
  ftrace,kdb: Extend kdb to be able to dump the ftrace buffer
  kgdb,powerpc: Replace hardcoded offset by BREAK_INSTR_SIZE
  arm,kgdb: Add ability to trap into debugger on notify_die
  gdbstub: do not directly use dbg_reg_def[] in gdb_cmd_reg_set()
  gdbstub: Implement gdbserial 'p' and 'P' packets
  kgdb,arm: Individual register get/set for arm
  kgdb,mips: Individual register get/set for mips
  kgdb,x86: Individual register get/set for x86
  kgdb,kdb: individual register set and and get API
  gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
  kgdb: remove custom hex_to_bin()implementation
2010-08-05 15:59:48 -07:00
Jason Wessel
62a0309c4c arm,kgdb: Add ability to trap into debugger on notify_die
Now that ARM implements the notify die handlers, add the ability for
the kernel debugger to receive the notifications.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: linux-arm-kernel@lists.infradead.org
2010-08-05 09:22:22 -05:00
Jason Wessel
22eeef4bb2 kgdb,arm: Individual register get/set for arm
Implement the ability to individually get and set registers for kdb
and kgdb for arm.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: linux-arm-kernel@lists.infradead.org
2010-08-05 09:22:21 -05:00
Catalin Marinas
b749315601 ARM: 6191/1: Do not compile the Thumb-2 module relocations on an ARM kernel
Kernels compiled to ARM do not need to handle Thumb-2 module relocations
as interworking is not allowed. This patch #ifdef's out the handling of
such relocations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-05 10:35:48 +01:00
Catalin Marinas
0567821cd8 ARM: 6190/1: Remove dummy loads from the original relocation address
Reading back the upper and lower values in the R_ARM_THM_CALL and
R_ARM_THM_JUMP24 case was introduced by a previous commit but they are
not needed.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-05 10:35:47 +01:00
Catalin Marinas
8dd47741d1 ARM: 6189/1: Add support for the MOVW/MOVT relocations in Thumb-2
The patch adds handling case for the R_ARM_THM_MOVW_ABS_NC and
R_ARM_THM_MOVT_ABS relocations in arch/arm/kernel/module.c. Such
relocations may appear in Thumb-2 compiled kernel modules.

Reported-by: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-05 10:35:46 +01:00
Russell King
7b70c4275f Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/kernel/entry-armv.S
	arch/arm/kernel/setup.c
	arch/arm/mm/init.c
2010-07-31 14:20:16 +01:00
Russell King
ceb0885d3b Merge branch 'misc' into devel
Conflicts:
	arch/arm/mm/init.c
2010-07-31 14:20:02 +01:00
Russell King
b31fc7af78 Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb', 'nomadik', 'nuc', 'pl', 'spear' and 'versatile' into devel 2010-07-31 14:19:35 +01:00
Russell King
a20df564d1 Merge branch 'arm/booting' of git://git.pengutronix.de/git/ukl/linux-2.6 into devel-stable
Conflicts:
	arch/arm/Kconfig
2010-07-29 22:27:56 +01:00
Russell King
3d3f78d752 ARM: call machine_shutdown() from machine_halt(), etc
x86 calls machine_shutdown() from the various machine_*() calls which
take the machine down ready for halting, restarting, etc, and uses
this to bring the system safely to a point where those actions can be
performed.  Such actions are stopping the secondary CPUs.

So, change the ARM implementation of these to reflect what x86 does.

This solves kexec problems on ARM SMP platforms, where the secondary
CPUs were left running across the kexec call.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 10:48:43 +01:00
Russell King
5388a6b266 ARM: SMP: Always enable clock event broadcast support
The TWD local timers are unable to wake up the CPU when it is placed
into a low power mode, eg. C3.  Therefore, we need to adapt things
such that the TWD code can cope with this.

We do this by always providing a broadcast tick function, and marking
the fact that the TWD local timer will stop in low power modes.  This
means that when the CPU is placed into a low power mode, the core
timer code marks this fact, and allows an IPI to be given to the core.

Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
2010-07-27 10:48:42 +01:00
Russell King
9ca03a21e3 ARM: Factor out common code from cpu_proc_fin()
All implementations of cpu_proc_fin() start by disabling interrupts
and then flush caches.  Rather than have every processors proc_fin()
implementation do this, move it out into generic code - and move the
cache flush past setup_mm_for_reboot() (so it can benefit from having
caches still enabled.)

This allows cpu_proc_fin() to become independent of the L1/L2 cache
types, and eventually move the L2 cache flushing into the L2 support
code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 10:48:42 +01:00
Russell King
4708ac4930 Merge branch 'origin' into misc 2010-07-27 10:42:52 +01:00
Linus Walleij
1dbd30e989 ARM: 6225/1: make TCM allocation static and common for all archs
This changes the TCM handling so that a fixed area is reserved at
0xfffe0000-0xfffeffff for TCM. This areas is used by XScale but
XScale does not have TCM so the mechanisms are mutually exclusive.

This change is needed to make TCM detection more dynamic while
still being able to compile code into it, and is a must for the
unified ARM goals: the current TCM allocation at different places
in memory for each machine would be a nightmare if you want to
compile a single image for more than one machine with TCM so it
has to be nailed down in one place.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 10:42:38 +01:00
Russell King
8d717a52d1 ARM: Convert platform reservations to use LMB rather than bootmem
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 08:48:23 +01:00
Russell King
2778f62056 ARM: initial LMB trial
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 08:48:22 +01:00
Ingo Molnar
9dcdbf7a33 Merge branch 'linus' into perf/core
Merge reason: Pick up the latest perf fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-07-21 21:43:06 +02:00
Russell King
14764b01a5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/nico/orion into devel-stable 2010-07-21 09:22:45 +01:00
Linus Walleij
598509779e ARM: 6223/1: support multiple TCM banks
CPUs v6 and up support multiple TCM banks, for example an ITCM of
8k is supplied in two 4k banks. This makes the TCM work on the
1176JZF-S devchip.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-18 20:29:48 +01:00
Linus Walleij
cb9d7707cd ARM: 6222/1: add memory types for the TCMs
The earlier TCM memory regions were mapped as MT_MEMORY_UNCACHED
which doesn't really work on platforms supporting the new v6
features like the NX bit. Add unique MT_MEMORY_[I|D]TCM types
instead.

Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-18 20:29:47 +01:00
Russell King
be37030274 ARM: Remove DISCONTIGMEM support
Everything should now be using sparsemem rather than discontigmem, so
remove the code supporting discontigmem from ARM.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 10:57:35 +01:00
Nicolas Pitre
0ebe25f90c ARM: 6226/1: fix kprobe bug in ldr instruction emulation
From: Bin Yang <bin.yang@marvell.com>

Cc: stable@kernel.org
Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-14 23:28:06 +01:00
Russell King
ac78884e6d ARM: lockdep: fix unannotated irqs-on
CPU: Testing write buffer coherency: ok
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:3145 check_flags+0xcc/0x1dc()
Modules linked in:
[<c0035120>] (unwind_backtrace+0x0/0xf8) from [<c0355374>] (dump_stack+0x20/0x24)
[<c0355374>] (dump_stack+0x20/0x24) from [<c0060c04>] (warn_slowpath_common+0x58/0x70)
[<c0060c04>] (warn_slowpath_common+0x58/0x70) from [<c0060c3c>] (warn_slowpath_null+0x20/0x24)
[<c0060c3c>] (warn_slowpath_null+0x20/0x24) from [<c008f224>] (check_flags+0xcc/0x1dc)
[<c008f224>] (check_flags+0xcc/0x1dc) from [<c00945dc>] (lock_acquire+0x50/0x140)
[<c00945dc>] (lock_acquire+0x50/0x140) from [<c0358434>] (_raw_spin_lock+0x50/0x88)
[<c0358434>] (_raw_spin_lock+0x50/0x88) from [<c00fd114>] (set_task_comm+0x2c/0x60)
[<c00fd114>] (set_task_comm+0x2c/0x60) from [<c007e184>] (kthreadd+0x30/0x108)
[<c007e184>] (kthreadd+0x30/0x108) from [<c0030104>] (kernel_thread_exit+0x0/0x8)
---[ end trace 1b75b31a2719ed1c ]---
possible reason: unannotated irqs-on.
irq event stamp: 3
hardirqs last  enabled at (2): [<c0059bb0>] finish_task_switch+0x48/0xb0
hardirqs last disabled at (3): [<c002f0b0>] ret_slow_syscall+0xc/0x1c
softirqs last  enabled at (0): [<c005f3e0>] copy_process+0x394/0xe5c
softirqs last disabled at (0): [<(null)>] (null)

Fix this by ensuring that the lockdep interrupt state is manipulated in
the appropriate places.  We essentially treat userspace as an entirely
separate environment which isn't relevant to lockdep (lockdep doesn't
monitor userspace.)  We don't tell lockdep that IRQs will be enabled
in that environment.

Instead, when creating kernel threads (which is a rare event compared
to entering/leaving userspace) we have to update the lockdep state.  Do
this by starting threads with IRQs disabled, and in the kthread helper,
tell lockdep that IRQs are enabled, and enable them.

This provides lockdep with a consistent view of the current IRQ state
in kernel space.

This also revert portions of 0d928b0b61
which didn't fix the problem.

Tested-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-10 10:53:13 +01:00
Mika Westerberg
cea0bb1bc5 ARM: 6122/1: kdump: add support for elfcorehdr parameter
This parameter is used by primary kernel to pass address of vmcore
header to the dump capture kernel.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09 15:00:53 +01:00
Mika Westerberg
67742c8168 ARM: 6120/1: kdump: implement copy_oldmem_page()
This function is used by vmcore code to read a page from the old
kernel memory.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09 15:00:53 +01:00
Mika Westerberg
8594a0c333 ARM: 6119/1: kdump: skip indirection page when crashing
When we are crashing there is no indirection page in place. Only
control page is present.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09 15:00:52 +01:00
Mika Westerberg
c63836204b ARM: 6118/1: kdump: implement machine_crash_shutdown()
Implement function machine_crash_shutdown() which disables IRQs and
saves machine state to ELF notes structure.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09 15:00:52 +01:00
Mika Westerberg
3c57fb43c8 ARM: 6116/1: kdump: reserve memory for crashkernel
Implemented ARM support for command line option
"crashkernel=size@start" which allows user to reserve some memory
for a dump capture kernel.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09 15:00:51 +01:00