Commit Graph

2684 Commits

Author SHA1 Message Date
Linus Torvalds
09ce42d316 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6:
  bnx2: Fix the behavior of ethtool when ONBOOT=no
  qla3xxx: Don't sleep while holding lock.
  qla3xxx: Give the PHY time to come out of reset.
  ipv4 routing: Ensure that route cache entries are usable and reclaimable with caching is off
  net: Move rx skb_orphan call to where needed
  ipv6: Use correct data types for ICMPv6 type and code
  net: let KS8842 driver depend on HAS_IOMEM
  can: let SJA1000 driver depend on HAS_IOMEM
  netxen: fix firmware init handshake
  netxen: fix build with without CONFIG_PM
  netfilter: xt_rateest: fix comparison with self
  netfilter: xt_quota: fix incomplete initialization
  netfilter: nf_log: fix direct userspace memory access in proc handler
  netfilter: fix some sparse endianess warnings
  netfilter: nf_conntrack: fix conntrack lookup race
  netfilter: nf_conntrack: fix confirmation race condition
  netfilter: nf_conntrack: death_by_timeout() fix
2009-06-24 10:01:12 -07:00
Herbert Xu
d55d87fdff net: Move rx skb_orphan call to where needed
In order to get the tun driver to account packets, we need to be
able to receive packets with destructors set.  To be on the safe
side, I added an skb_orphan call for all protocols by default since
some of them (IP in particular) cannot handle receiving packets
destructors properly.

Now it seems that at least one protocol (CAN) expects to be able
to pass skb->sk through the rx path without getting clobbered.

So this patch attempts to fix this properly by moving the skb_orphan
call to where it's actually needed.  In particular, I've added it
to skb_set_owner_[rw] which is what most users of skb->destructor
call.

This is actually an improvement for tun too since it means that
we only give back the amount charged to the socket when the skb
is passed to another socket that will also be charged accordingly.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Oliver Hartkopp <olver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23 16:36:25 -07:00
Brian Haley
d5fdd6babc ipv6: Use correct data types for ICMPv6 type and code
Change all the code that deals directly with ICMPv6 type and code
values to use u8 instead of a signed int as that's the actual data
type.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23 04:31:07 -07:00
Linus Torvalds
5165aece0e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (43 commits)
  via-velocity: Fix velocity driver unmapping incorrect size.
  mlx4_en: Remove redundant refill code on RX
  mlx4_en: Removed redundant check on lso header size
  mlx4_en: Cancel port_up check in transmit function
  mlx4_en: using stop/start_all_queues
  mlx4_en: Removed redundant skb->len check
  mlx4_en: Counting all the dropped packets on the TX side
  usbnet cdc_subset: fix issues talking to PXA gadgets
  Net: qla3xxx, remove sleeping in atomic
  ipv4: fix NULL pointer + success return in route lookup path
  isdn: clean up documentation index
  cfg80211: validate station settings
  cfg80211: allow setting station parameters in mesh
  cfg80211: allow adding/deleting stations on mesh
  ath5k: fix beacon_int handling
  MAINTAINERS: Fix Atheros pattern paths
  ath9k: restore PS mode, before we put the chip into FULL SLEEP state.
  ath9k: wait for beacon frame along with CAB
  acer-wmi: fix rfkill conversion
  ath5k: avoid PCI FATAL interrupts by restoring RETRY_TIMEOUT disabling
  ...
2009-06-22 11:57:09 -07:00
Hendrik Brueckner
0ea920d211 af_iucv: Return -EAGAIN if iucv msg limit is exceeded
If the iucv message limit for a communication path is exceeded,
sendmsg() returns -EAGAIN instead of -EPIPE.
The calling application can then handle this error situtation,
e.g. to try again after waiting some time.

For blocking sockets, sendmsg() waits up to the socket timeout
before returning -EAGAIN. For the new wait condition, a macro
has been introduced and the iucv_sock_wait_state() has been
refactored to this macro.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19 00:10:40 -07:00
Linus Torvalds
d2aa455037 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (55 commits)
  netxen: fix tx ring accounting
  netxen: fix detection of cut-thru firmware mode
  forcedeth: fix dma api mismatches
  atm: sk_wmem_alloc initial value is one
  net: correct off-by-one write allocations reports
  via-velocity : fix no link detection on boot
  Net / e100: Fix suspend of devices that cannot be power managed
  TI DaVinci EMAC : Fix rmmod error
  net: group address list and its count
  ipv4: Fix fib_trie rebalancing, part 2
  pkt_sched: Update drops stats in act_police
  sky2: version 1.23
  sky2: add GRO support
  sky2: skb recycling
  sky2: reduce default transmit ring
  sky2: receive counter update
  sky2: fix shutdown synchronization
  sky2: PCI irq issues
  sky2: more receive shutdown
  sky2: turn off pause during shutdown
  ...

Manually fix trivial conflict in net/core/skbuff.c due to kmemcheck
2009-06-18 14:07:15 -07:00
Eric Dumazet
c564039fd8 net: sk_wmem_alloc has initial value of one, not zero
commit 2b85a34e91
(net: No more expensive sock_hold()/sock_put() on each tx)
changed initial sk_wmem_alloc value.

Some protocols check sk_wmem_alloc value to determine if a timer
must delay socket deallocation. We must take care of the sk_wmem_alloc
value being one instead of zero when no write allocations are pending.

Reported by Ingo Molnar, and full diagnostic from David Miller.

This patch introduces three helpers to get read/write allocations
and a followup patch will use these helpers to report correct
write allocations to user.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17 04:31:25 -07:00
Linus Torvalds
b3fec0fe35 Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/vegard/kmemcheck
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/vegard/kmemcheck: (39 commits)
  signal: fix __send_signal() false positive kmemcheck warning
  fs: fix do_mount_root() false positive kmemcheck warning
  fs: introduce __getname_gfp()
  trace: annotate bitfields in struct ring_buffer_event
  net: annotate struct sock bitfield
  c2port: annotate bitfield for kmemcheck
  net: annotate inet_timewait_sock bitfields
  ieee1394/csr1212: fix false positive kmemcheck report
  ieee1394: annotate bitfield
  net: annotate bitfields in struct inet_sock
  net: use kmemcheck bitfields API for skbuff
  kmemcheck: introduce bitfield API
  kmemcheck: add opcode self-testing at boot
  x86: unify pte_hidden
  x86: make _PAGE_HIDDEN conditional
  kmemcheck: make kconfig accessible for other architectures
  kmemcheck: enable in the x86 Kconfig
  kmemcheck: add hooks for the page allocator
  kmemcheck: add hooks for page- and sg-dma-mappings
  kmemcheck: don't track page tables
  ...
2009-06-16 13:09:51 -07:00
David S. Miller
14ebaf81e1 x25: Fix sleep from timer on socket destroy.
If socket destuction gets delayed to a timer, we try to
lock_sock() from that timer which won't work.

Use bh_lock_sock() in that case.

Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Ingo Molnar <mingo@elte.hu>
2009-06-16 05:40:30 -07:00
Vegard Nossum
a98b65a3ad net: annotate struct sock bitfield
2009/2/24 Ingo Molnar <mingo@elte.hu>:
> ok, this is the last warning i have from today's overnight -tip
> testruns - a 32-bit system warning in sock_init_data():
>
> [    2.610389] NET: Registered protocol family 16
> [    2.616138] initcall netlink_proto_init+0x0/0x170 returned 0 after 7812 usecs
> [    2.620010] WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (f642c184)
> [    2.624002] 010000000200000000000000604990c000000000000000000000000000000000
> [    2.634076]  i i i i i i u u i i i i i i i i i i i i i i i i i i i i i i i i
> [    2.641038]          ^
> [    2.643376]
> [    2.644004] Pid: 1, comm: swapper Not tainted (2.6.29-rc6-tip-01751-g4d1c22c-dirty #885)
> [    2.648003] EIP: 0060:[<c07141a1>] EFLAGS: 00010282 CPU: 0
> [    2.652008] EIP is at sock_init_data+0xa1/0x190
> [    2.656003] EAX: 0001a800 EBX: f6836c00 ECX: 00463000 EDX: c0e46fe0
> [    2.660003] ESI: f642c180 EDI: c0b83088 EBP: f6863ed8 ESP: c0c412ec
> [    2.664003]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
> [    2.668003] CR0: 8005003b CR2: f682c400 CR3: 00b91000 CR4: 000006f0
> [    2.672003] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
> [    2.676003] DR6: ffff4ff0 DR7: 00000400
> [    2.680002]  [<c07423e5>] __netlink_create+0x35/0xa0
> [    2.684002]  [<c07443cc>] netlink_kernel_create+0x4c/0x140
> [    2.688002]  [<c072755e>] rtnetlink_net_init+0x1e/0x40
> [    2.696002]  [<c071b601>] register_pernet_operations+0x11/0x30
> [    2.700002]  [<c071b72c>] register_pernet_subsys+0x1c/0x30
> [    2.704002]  [<c0bf3c8c>] rtnetlink_init+0x4c/0x100
> [    2.708002]  [<c0bf4669>] netlink_proto_init+0x159/0x170
> [    2.712002]  [<c0101124>] do_one_initcall+0x24/0x150
> [    2.716002]  [<c0bbf3c7>] do_initcalls+0x27/0x40
> [    2.723201]  [<c0bbf3fc>] do_basic_setup+0x1c/0x20
> [    2.728002]  [<c0bbfb8a>] kernel_init+0x5a/0xa0
> [    2.732002]  [<c0103e47>] kernel_thread_helper+0x7/0x10
> [    2.736002]  [<ffffffff>] 0xffffffff

We fix this false positive by annotating the bitfield in struct
sock.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
2009-06-15 15:49:36 +02:00
Vegard Nossum
9e337b0fb3 net: annotate inet_timewait_sock bitfields
The use of bitfields here would lead to false positive warnings with
kmemcheck. Silence them.

(Additionally, one erroneous comment related to the bitfield was also
fixed.)

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
2009-06-15 15:49:32 +02:00
Vegard Nossum
45e3ff8270 net: annotate bitfields in struct inet_sock
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
2009-06-15 15:49:27 +02:00
Jarek Poplawski
ca44d6e60f pkt_sched: Rename PSCHED_US2NS and PSCHED_NS2US
Let's use TICKS instead of US, so PSCHED_TICKS2NS and PSCHED_NS2TICKS
(like in PSCHED_TICKS_PER_SEC already) to avoid misleading.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-15 02:31:47 -07:00
Pablo Neira Ayuso
dd7669a92c netfilter: conntrack: optional reliable conntrack event delivery
This patch improves ctnetlink event reliability if one broadcast
listener has set the NETLINK_BROADCAST_ERROR socket option.

The logic is the following: if an event delivery fails, we keep
the undelivered events in the missed event cache. Once the next
packet arrives, we add the new events (if any) to the missed
events in the cache and we try a new delivery, and so on. Thus,
if ctnetlink fails to deliver an event, we try to deliver them
once we see a new packet. Therefore, we may lose state
transitions but the userspace process gets in sync at some point.

At worst case, if no events were delivered to userspace, we make
sure that destroy events are successfully delivered. Basically,
if ctnetlink fails to deliver the destroy event, we remove the
conntrack entry from the hashes and we insert them in the dying
list, which contains inactive entries. Then, the conntrack timer
is added with an extra grace timeout of random32() % 15 seconds
to trigger the event again (this grace timeout is tunable via
/proc). The use of a limited random timeout value allows
distributing the "destroy" resends, thus, avoiding accumulating
lots "destroy" events at the same time. Event delivery may
re-order but we can identify them by means of the tuple plus
the conntrack ID.

The maximum number of conntrack entries (active or inactive) is
still handled by nf_conntrack_max. Thus, we may start dropping
packets at some point if we accumulate a lot of inactive conntrack
entries that did not successfully report the destroy event to
userspace.

During my stress tests consisting of setting a very small buffer
of 2048 bytes for conntrackd and the NETLINK_BROADCAST_ERROR socket
flag, and generating lots of very small connections, I noticed
very few destroy entries on the fly waiting to be resend.

A simple way to test this patch consist of creating a lot of
entries, set a very small Netlink buffer in conntrackd (+ a patch
which is not in the git tree to set the BROADCAST_ERROR flag)
and invoke `conntrack -F'.

For expectations, no changes are introduced in this patch.
Currently, event delivery is only done for new expectations (no
events from expectation expiration, removal and confirmation).
In that case, they need a per-expectation event cache to implement
the same idea that is exposed in this patch.

This patch can be useful to provide reliable flow-accouting. We
still have to add a new conntrack extension to store the creation
and destroy time.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-06-13 12:30:52 +02:00
Pablo Neira Ayuso
9858a3ae1d netfilter: conntrack: move helper destruction to nf_ct_helper_destroy()
This patch moves the helper destruction to a function that lives
in nf_conntrack_helper.c. This new function is used in the patch
to add ctnetlink reliable event delivery.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-06-13 12:28:22 +02:00
Pablo Neira Ayuso
a0891aa6a6 netfilter: conntrack: move event caching to conntrack extension infrastructure
This patch reworks the per-cpu event caching to use the conntrack
extension infrastructure.

The main drawback is that we consume more memory per conntrack
if event delivery is enabled. This patch is required by the
reliable event delivery that follows to this patch.

BTW, this patch allows you to enable/disable event delivery via
/proc/sys/net/netfilter/nf_conntrack_events in runtime, although
you can still disable event caching as compilation option.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-06-13 12:26:29 +02:00
Patrick McHardy
36432dae73 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6 2009-06-11 16:00:49 +02:00
David S. Miller
bb400801c2 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6 2009-06-11 05:47:43 -07:00
Eric Dumazet
2b85a34e91 net: No more expensive sock_hold()/sock_put() on each tx
One of the problem with sock memory accounting is it uses
a pair of sock_hold()/sock_put() for each transmitted packet.

This slows down bidirectional flows because the receive path
also needs to take a refcount on socket and might use a different
cpu than transmit path or transmit completion path. So these
two atomic operations also trigger cache line bounces.

We can see this in tx or tx/rx workloads (media gateways for example),
where sock_wfree() can be in top five functions in profiles.

We use this sock_hold()/sock_put() so that sock freeing
is delayed until all tx packets are completed.

As we also update sk_wmem_alloc, we could offset sk_wmem_alloc
by one unit at init time, until sk_free() is called.
Once sk_free() is called, we atomic_dec_and_test(sk_wmem_alloc)
to decrement initial offset and atomicaly check if any packets
are in flight.

skb_set_owner_w() doesnt call sock_hold() anymore

sock_wfree() doesnt call sock_put() anymore, but check if sk_wmem_alloc
reached 0 to perform the final freeing.

Drawback is that a skb->truesize error could lead to unfreeable sockets, or
even worse, prematurely calling __sk_free() on a live socket.

Nice speedups on SMP. tbench for example, going from 2691 MB/s to 2711 MB/s
on my 8 cpu dev machine, even if tbench was not really hitting sk_refcnt
contention point. 5 % speedup on a UDP transmit workload (depends
on number of flows), lowering TX completion cpu usage.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:55:43 -07:00
Johannes Berg
8f77f3849c mac80211: do not pass PS frames out of mac80211 again
In order to handle powersave frames properly we had needed
to pass these out to the device queues again, and introduce
the skb->requeue bit. This, however, also has unnecessary
overhead by needing to 'clean up' already tried frames, and
this clean-up code is also buggy when software encryption
is used.

Instead of sending the frames via the master netdev queue
again, simply put them into the pending queue. This also
fixes a problem where frames for that particular station
could be reordered when some were still on the software
queues and older ones are re-injected into the software
queue after them.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-10 13:28:37 -04:00
Patrick McHardy
440f0d5885 netfilter: nf_conntrack: use per-conntrack locks for protocol data
Introduce per-conntrack locks and use them instead of the global protocol
locks to avoid contention. Especially tcp_lock shows up very high in
profiles on larger machines.

This will also allow to simplify the upcoming reliable event delivery patches.

Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-06-10 14:32:47 +02:00
Sergey Lapin
2c21d11518 net: add NL802154 interface for configuration of 802.15.4 devices
Add a netlink interface for configuration of IEEE 802.15.4 device. Also this
interface specifies events notification sent by devices towards higher layers.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09 05:25:33 -07:00
Sergey Lapin
9ec7671603 net: add IEEE 802.15.4 socket family implementation
Add support for communication over IEEE 802.15.4 networks. This implementation
is neither certified nor complete, but aims to that goal. This commit contains
only the socket interface for communication over IEEE 802.15.4 networks.
One can either send RAW datagrams or use SOCK_DGRAM to encapsulate data
inside normal IEEE 802.15.4 packets.

Configuration interface, drivers and software MAC 802.15.4 implementation will
follow.

Initial implementation was done by Maxim Gorbachyov, Maxim Osipov and Pavel
Smolensky as a research project at Siemens AG. Later the stack was heavily
reworked to better suit the linux networking model, and is now maitained
as an open project partially sponsored by Siemens.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09 05:25:32 -07:00
Jarek Poplawski
a4a710c4a7 pkt_sched: Change PSCHED_SHIFT from 10 to 6
Change PSCHED_SHIFT from 10 to 6 to increase schedulers time
resolution. This will increase 16x a number of (internal) ticks per
nanosecond, and is needed to improve accuracy of schedulers based on
rate tables, like HTB, TBF or CBQ, with rates above 100Mbit. It is
assumed this change is safe for 32bit accounting of time diffs up
to 2 minutes, which should be enough for common use (extremely low
rate values may overflow, so get inaccurate instead). To make full
use of this change an updated iproute2 will be needed. (But using
older iproute2 should be safe too.)

This change breaks ticks - microseconds similarity, so some minor code
fixes might be needed. It is also planned to change naming adequately
eg. to PSCHED_TICKS2NS() etc. in the near future.

Reported-by: Antonio Almeida <vexwek@gmail.com>
Tested-by: Antonio Almeida <vexwek@gmail.com>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09 05:25:30 -07:00
Jarek Poplawski
728bf09827 pkt_sched: Use PSCHED_SHIFT in PSCHED time conversion
Use PSCHED_SHIFT constant instead of '10' in PSCHED_US2NS() and
PSCHED_NS2US() macros to enable changing this value later.

Additionally use PSCHED_SHIFT in sch_hfsc SM_SHIFT and ISM_SHIFT
definitions. This part of the patch is based on feedback from
Patrick McHardy <kaber@trash.net>.

Reported-by: Antonio Almeida <vexwek@gmail.com>
Tested-by: Antonio Almeida <vexwek@gmail.com>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09 05:25:29 -07:00
David S. Miller
05f77f85f4 bluetooth: Kill skb_frags_no(), unused.
Furthermore, it twiddles with the details of SKB list handling
directly, which we're trying to eliminate.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-08 16:16:56 -07:00
Jan Kasprzak
f87fb666bb netfilter: nf_ct_icmp: keep the ICMP ct entries longer
Current conntrack code kills the ICMP conntrack entry as soon as
the first reply is received. This is incorrect, as we then see only
the first ICMP echo reply out of several possible duplicates as
ESTABLISHED, while the rest will be INVALID. Also this unnecessarily
increases the conntrackd traffic on H-A firewalls.

Make all the ICMP conntrack entries (including the replied ones)
last for the default of nf_conntrack_icmp{,v6}_timeout seconds.

Signed-off-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-06-08 15:53:43 +02:00
Marcel Holtmann
611b30f74b Bluetooth: Add native RFKILL soft-switch support for all devices
With the re-write of the RFKILL subsystem it is now possible to easily
integrate RFKILL soft-switch support into the Bluetooth subsystem. All
Bluetooth devices will now get automatically RFKILL support.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-06-08 14:50:01 +02:00
Marcel Holtmann
b4324b5dc5 Bluetooth: Remove pointless endian conversion helpers
The Bluetooth source uses some endian conversion helpers, that in the end
translate to kernel standard routines. So remove this obfuscation since it
is fully pointless.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-06-08 14:50:01 +02:00
Marcel Holtmann
47ec1dcd69 Bluetooth: Add basic constants for L2CAP ERTM support and use them
This adds the basic constants required to add support for L2CAP Enhanced
Retransmission feature.

Based on a patch from Nathan Holstein <nathan@lampreynetworks.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-06-08 14:50:00 +02:00
Gustavo F. Padovan
589d274648 Bluetooth: Use macro for L2CAP hint mask on receiving config request
Using the L2CAP_CONF_HINT macro is easier to understand than using a
hardcoded 0x80 value.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-06-08 14:50:00 +02:00
Gustavo F. Padovan
8db4dc46dc Bluetooth: Use macros for L2CAP channel identifiers
Use macros instead of hardcoded numbers to make the L2CAP source code
more readable.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-06-08 14:49:59 +02:00
David S. Miller
b1bc81a0ef Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2009-06-07 04:24:21 -07:00
Johannes Berg
1f87f7d3a3 cfg80211: add rfkill support
To be easier on drivers and users, have cfg80211 register an
rfkill structure that drivers can access. When soft-killed,
simply take down all interfaces; when hard-killed the driver
needs to notify us and we will take down the interfaces
after the fact. While rfkilled, interfaces cannot be set UP.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03 14:06:14 -04:00
Johannes Berg
7643a2c3fc cfg80211: move txpower wext from mac80211
This patch introduces new cfg80211 API to set the TX power
via cfg80211, puts the wext code into cfg80211 and updates
mac80211 to use all that. The -ENETDOWN bits are a hack but
will go away soon.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03 14:06:14 -04:00
Johannes Berg
19d337dff9 rfkill: rewrite
This patch completely rewrites the rfkill core to address
the following deficiencies:

 * all rfkill drivers need to implement polling where necessary
   rather than having one central implementation

 * updating the rfkill state cannot be done from arbitrary
   contexts, forcing drivers to use schedule_work and requiring
   lots of code

 * rfkill drivers need to keep track of soft/hard blocked
   internally -- the core should do this

 * the rfkill API has many unexpected quirks, for example being
   asymmetric wrt. alloc/free and register/unregister

 * rfkill can call back into a driver from within a function the
   driver called -- this is prone to deadlocks and generally
   should be avoided

 * rfkill-input pointlessly is a separate module

 * drivers need to #ifdef rfkill functions (unless they want to
   depend on or select RFKILL) -- rfkill should provide inlines
   that do nothing if it isn't compiled in

 * the rfkill structure is not opaque -- drivers need to initialise
   it correctly (lots of sanity checking code required) -- instead
   force drivers to pass the right variables to rfkill_alloc()

 * the documentation is hard to read because it always assumes the
   reader is completely clueless and contains way TOO MANY CAPS

 * the rfkill code needlessly uses a lot of locks and atomic
   operations in locked sections

 * fix LED trigger to actually change the LED when the radio state
   changes -- this wasn't done before

Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad]
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03 14:06:13 -04:00
Johannes Berg
e535c7566e mac80211: deprecate conf.beacon_int properly
Ivo has updated the driver to no longer use the change flag,
so we can remove that, but rt2x00 and ath5k still use the
actual value so let's mark it as deprecated too.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03 14:05:09 -04:00
Vlad Yasevich
c6ba68a266 sctp: support non-blocking version of the new sctp_connectx() API
Prior implementation of the new sctp_connectx() call that returns
an association ID did not work correctly on non-blocking socket.
This is because we could not return both a EINPROGRESS error and
an association id.  This is a new implementation that supports this.

Originally from Ivan Skytte Jørgensen <isj-sctp@i1.dk

Signed-off-by: Ivan Skytte Jørgensen <isj-sctp@i1.dk
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-06-03 09:14:47 -04:00
Wei Yongjun
9919b455fc sctp: fix to choose alternate destination when retransmit ASCONF chunk
RFC 5061 Section 5.1 ASCONF Chunk Procedures said:

B4)  Re-transmit the ASCONF Chunk last sent and if possible choose an
     alternate destination address (please refer to [RFC4960],
     Section 6.4.1).  An endpoint MUST NOT add new parameters to this
     chunk; it MUST be the same (including its Sequence Number) as
     the last ASCONF sent.  An endpoint MAY, however, bundle an
     additional ASCONF with new ASCONF parameters with the next
     Sequence Number.  For details, see Section 5.5.

This patch fix to choose an alternate destination address when
re-transmit the ASCONF chunk, with some dup codes cleanup.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-06-03 09:14:46 -04:00
Eric Dumazet
adf30907d6 net: skb->dst accessors
Define three accessors to get/set dst attached to a skb

struct dst_entry *skb_dst(const struct sk_buff *skb)

void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst)

void skb_dst_drop(struct sk_buff *skb)
This one should replace occurrences of :
dst_release(skb->dst)
skb->dst = NULL;

Delete skb->dst field

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03 02:51:04 -07:00
Eric Dumazet
511c3f92ad net: skb->rtable accessor
Define skb_rtable(const struct sk_buff *skb) accessor to get rtable from skb

Delete skb->rtable field

Setting rtable is not allowed, just set dst instead as rtable is an alias.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03 02:51:02 -07:00
Pablo Neira Ayuso
e34d5c1a4f netfilter: conntrack: replace notify chain by function pointer
This patch removes the notify chain infrastructure and replace it
by a simple function pointer. This issue has been mentioned in the
mailing list several times: the use of the notify chain adds
too much overhead for something that is only used by ctnetlink.

This patch also changes nfnetlink_send(). It seems that gfp_any()
returns GFP_KERNEL for user-context request, like those via
ctnetlink, inside the RCU read-side section which is not valid.
Using GFP_KERNEL is also evil since netlink may schedule(),
this leads to "scheduling while atomic" bug reports.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2009-06-03 10:32:06 +02:00
Pablo Neira Ayuso
17e6e4eac0 netfilter: conntrack: simplify event caching system
This patch simplifies the conntrack event caching system by removing
several events:

 * IPCT_[*]_VOLATILE, IPCT_HELPINFO and IPCT_NATINFO has been deleted
   since the have no clients.
 * IPCT_COUNTER_FILLING which is a leftover of the 32-bits counter
   days.
 * IPCT_REFRESH which is not of any use since we always include the
   timeout in the messages.

After this patch, the existing events are:

 * IPCT_NEW, IPCT_RELATED and IPCT_DESTROY, that are used to identify
 addition and deletion of entries.
 * IPCT_STATUS, that notes that the status bits have changes,
 eg. IPS_SEEN_REPLY and IPS_ASSURED.
 * IPCT_PROTOINFO, that reports that internal protocol information has
 changed, eg. the TCP, DCCP and SCTP protocol state.
 * IPCT_HELPER, that a helper has been assigned or unassigned to this
 entry.
 * IPCT_MARK and IPCT_SECMARK, that reports that the mark has changed, this
 covers the case when a mark is set to zero.
 * IPCT_NATSEQADJ, to report that there's updates in the NAT sequence
 adjustment.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2009-06-02 20:08:46 +02:00
Pablo Neira Ayuso
6bfea1984a netfilter: conntrack: remove events flags from userspace exposed file
This patch moves the event flags from linux/netfilter/nf_conntrack_common.h
to net/netfilter/nf_conntrack_ecache.h. This flags are not of any use
from userspace.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2009-06-02 20:08:44 +02:00
Pablo Neira Ayuso
274d383b9c netfilter: conntrack: don't report events on module removal
During the module removal there are no possible event listeners
since ctnetlink must be removed before to allow removing
nf_conntrack. This patch removes the event reporting for the
module removal case which is not of any use in the existing code.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2009-06-02 20:08:38 +02:00
Pablo Neira Ayuso
f2f3e38c63 netfilter: ctnetlink: rename tuple() by nf_ct_tuple() macro definition
This patch move the internal tuple() macro definition to the
header file as nf_ct_tuple().

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2009-06-02 20:03:35 +02:00
Nivedita Singhvi
f771bef980 ipv4: New multicast-all socket option
After some discussion offline with Christoph Lameter and David Stevens
regarding multicast behaviour in Linux, I'm submitting a slightly
modified patch from the one Christoph submitted earlier.

This patch provides a new socket option IP_MULTICAST_ALL.

In this case, default behaviour is _unchanged_ from the current
Linux standard. The socket option is set by default to provide
original behaviour. Sockets wishing to receive data only from
multicast groups they join explicitly will need to clear this
socket option.

Signed-off-by: Nivedita Singhvi <niv@us.ibm.com>
Signed-off-by: Christoph Lameter<cl@linux.com>
Acked-by: David Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-02 00:45:24 -07:00
Pablo Neira Ayuso
a17c859849 netfilter: conntrack: add support for DCCP handshake sequence to ctnetlink
This patch adds CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ that exposes
the u64 handshake sequence number to user-space.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-05-27 17:50:35 +02:00
David S. Miller
45ea4ea2af Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2009-05-25 00:38:24 -07:00
Zhu Yi
e31a16d6f6 wireless: move some utility functions from mac80211 to cfg80211
The patch moves some utility functions from mac80211 to cfg80211.
Because these functions are doing generic 802.11 operations so they
are not mac80211 specific. The moving allows some fullmac drivers
to be also benefit from these utility functions.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22 14:06:02 -04:00