Commit Graph

72 Commits

Author SHA1 Message Date
Dan Carpenter
d8b79b2f94 f2fs: use _safe() version of list_for_each
This is calling list_del() inside a loop which is a problem when we try
move to the next item on the list.  I've converted it to use the _safe
version.  And also, as a cleanup, I've converted it to use
list_for_each_entry instead of list_for_each.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-22 10:49:00 +09:00
Jaegeuk Kim
9af45ef5ab f2fs: add comments of start_bidx_of_node
The caller of start_bidx_of_node() should give proper node offsets which
point only direct node blocks. Otherwise, it is a caller's bug.
This patch adds comments to make it clear.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-22 10:48:59 +09:00
Jaegeuk Kim
a7fdffbd3e f2fs: avoid issuing small bios due to several dirty node pages
If some small bios of dirty node pages are supposed to be issued during the
sequential data writes, there-in well-produced consecutive data bios are able
to be split by the small node bios, resulting in performance degradation.
So, let's collect a number of dirty node pages until reaching a threshold.
And, by default, I set the threshold as 2MB, a segment size.

This improves sequential write performance on i5, 512GB SSD (830 w/ SATA2) as
follows.
Before: 231 MB/s -> After: 255 MB/s

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
2013-01-22 10:48:59 +09:00
Jaegeuk Kim
c01e54b770 f2fs: support swapfile
This patch adds f2fs_bmap operation to the data address space.
This enables f2fs to support swapfile.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-22 10:48:58 +09:00
Jaegeuk Kim
692bb55d1a f2fs: add remap_pages as generic_file_remap_pages
This was added for all the file systems before.

See the following commit.

commit id: 0b173bc4da

[PATCH] mm: kill vma flag VM_CAN_NONLINEAR

This patch moves actual ptes filling for non-linear file mappings
into special vma operation: ->remap_pages().

File system must implement this method to get non-linear mappings support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.

Now device drivers can implement this method and obtain nonlinear vma support."

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-22 10:48:58 +09:00
Namjae Jeon
6e6093a8f1 f2fs: add __init to functions in init_f2fs_fs
Add __init to functions in init_f2fs_fs for code consistency.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-22 10:48:38 +09:00
Namjae Jeon
4589d25d01 f2fs: fix the debugfs entry creation path
As the "status" debugfs entry will be maintained for entire F2FS filesystem
irrespective of the number of partitions.
So, we can move the initialization to the init part of the f2fs and destroy will
be done from exit part. After making changes, for individual partition mount -
entry creation code will not be executed.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-15 20:19:15 +09:00
majianpeng
66af62ce75 f2fs: add global mutex_lock to protect f2fs_stat_list
There is an race condition between umounting f2fs and reading f2fs/status, which
results in oops.

Fox example:
Thread A			Thread B
umount f2fs 			cat f2fs/status

f2fs_destroy_stats() {		stat_show() {
				 list_for_each_entry_safe(&f2fs_stat_list)
 list_del(&si->stat_list);
 mutex_lock(&si->stat_lock);
 si->sbi = NULL;
 mutex_unlock(&si->stat_lock);
 kfree(sbi->stat_info);
} 				 mutex_lock(&si->stat_lock) <- si is gone.
				 ...
				}

Solution with a global lock: f2fs_stat_mutex:
Thread A			Thread B
umount f2fs 			cat f2fs/status

f2fs_destroy_stats() {		stat_show() {
 mutex_lock(&f2fs_stat_mutex);
 list_del(&si->stat_list);
 mutex_unlock(&f2fs_stat_mutex);
 kfree(sbi->stat_info);		 mutex_lock(&f2fs_stat_mutex);
}				 list_for_each_entry_safe(&f2fs_stat_list)
				 ...
				 mutex_unlock(&f2fs_stat_mutex);
				}

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
[jaegeuk.kim@samsung.com: fix typos, description, and remove the existing lock]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-15 20:18:29 +09:00
Namjae Jeon
fa9150a84c f2fs: remove the blk_plug usage in f2fs_write_data_pages
Let's consider the usage of blk_plug in f2fs_write_data_pages().
We can come up with the two issues: lock contention and task awareness.

1. Merging bios prior to grabing "queue lock"
 The f2fs merges consecutive IOs in the file system level before
 submitting any bios, which is similar with the back merge by the
 plugging mechanism in attempt_plug_merge(). Both of them need to acquire
 no queue lock.

2. Merging policy with respect to tasks
 The f2fs merges IOs as much as possible regardless of tasks, while
 blk-plugging is conducted on a basis of tasks. As we can understand
 there are trade-offs, f2fs tries to maximize the write performance with
 well-merged bios.

As a result, if f2fs produces many consecutive but separated bios in
writepages(), it would be good to use blk-plugging since f2fs would be
able to avoid queue lock contention in the block layer by merging them.
But, f2fs merges IOs and submit one bio, which means that there are not
much chances to merge bios by attempt_plug_merge().

However, f2fs has already been used blk_plug by triggering generic_writepages()
in f2fs_write_data_pages().
So to make the overall code consistency, I'd like to remove blk_plug there.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-15 20:18:16 +09:00
Namjae Jeon
163799872b f2fs: avoid redundant time update for parent directory in f2fs_delete_entry
In call to f2fs_delete_entry, 'dir' time modification code is put
at two places.
So, remove the redundant code for timing update.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-14 09:43:27 +09:00
Namjae Jeon
ff9234ad4e f2fs: remove redundant call to set_blocksize in f2fs_fill_super
Since, f2fs supports only 4KB blocksize, which is set at the beginning in
f2fs_fill_super. So, we do not need to again check this blocksize setting
in such case.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-14 09:41:30 +09:00
Jaegeuk Kim
9eaeba7013 f2fs: move f2fs_balance_fs to punch_hole
The f2fs_fallocate() has two operations: punch_hole and expand_size.

Only in the case of punch_hole, dirty node pages can be produced, so let's
trigger f2fs_balance_fs() in this case only.
Furthermore, let's trigger it at every data truncation routine.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-11 15:09:23 +09:00
Jaegeuk Kim
7d82db8316 f2fs: add f2fs_balance_fs in several interfaces
The f2fs_balance_fs() is to check the number of free sections and decide whether
it needs to conduct cleaning or not. If there are not enough free sections, the
cleaning job should be started.

In order to control an amount of free sections even under high utilization, f2fs
should call f2fs_balance_fs at all the VFS interfaces that are able to produce
dirty pages.
This patch adds the function calls in the missing interfaces as follows.

1. f2fs_setxattr()
The f2fs_setxattr() produces dirty node pages so that we should call
f2fs_balance_fs() either likewise doing in other VFS interfaces such as
f2fs_lookup(), f2fs_mkdir(), and so on.

2. f2fs_sync_file()
We should guarantee serving free sections for syncing metadata during fsync.
Previously, there is no space check before triggering checkpoint and
sync_node_pages.
Therefore, if a bunch of fsync calls are triggered under 100% of FS utilization,
f2fs is able to be faced with no free sections, resulting in BUG_ON().

3. f2fs_sync_fs()
Before calling write_checkpoint(), we should guarantee that there are minimum
free sections.

4. f2fs_write_inode()
f2fs_write_inode() is also able to produce dirty node pages.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-11 15:09:17 +09:00
Jaegeuk Kim
408e937561 f2fs: revisit the f2fs_gc flow
I'd like to revisit the f2fs_gc flow and rewrite as follows.

1. In practical, the nGC parameter of f2fs_gc is meaningless. So, let's
  remove it.
2. Background GC marks victim blocks as dirty one at a time.
3. Foreground GC should do cleaning job until acquiring enough free
  sections. Afterwards, it needs to do checkpoint.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-10 07:42:59 +09:00
Jaegeuk Kim
c335a86930 f2fs: check return value during recovery
This patch resolves Coverity #753102:

>>> No check of the return value of "f2fs_add_link(&dent, inode)".

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04 09:46:27 +09:00
Jaegeuk Kim
c1b75eabec f2fs: avoid null dereference in f2fs_acl_from_disk
This patch resolves Coverity #751303:

>>> CID 753103: Explicit null dereferenced (FORWARD_NULL) Passing null
>>> pointer "value" to function "f2fs_acl_from_disk(char const *, size_t)",
	which dereferences it.

[Error path]
- value = NULL;
- retval = 0 by f2fs_getxattr();
- f2fs_acl_from_disk(value:NULL, ...);

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04 09:46:27 +09:00
Jaegeuk Kim
d66d1f7687 f2fs: initialize newly allocated dnode structure
This patch resolves Coverity #753112.

In practical, the existing code flow does not fall into the reported errorneous
path. But, anyway, let's avoid this for future.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04 09:46:27 +09:00
Huajun Li
7880ceedec f2fs: update f2fs partition info about SIT/NAT layout
Update partition info output under debug FS to reflect segment layout correctly.

Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04 09:42:59 +09:00
Namjae Jeon
24c366a9ea f2fs: remove unneeded INIT_LIST_HEAD at few places
While creating a new entry for addition to the list(orphan inode list
and fsync inode entry list), there is no need to call HEAD initialization
for these entries. So, remove that init part.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04 09:42:59 +09:00
Namjae Jeon
3af60a49fd f2fs: fix time update in case of f2fs fallocate
After doing a punch hole or expanding inode doing fallocation.
The change and modification time are not update for the file.
So, update time after no issue is observed in fallocate.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04 09:42:59 +09:00
Namjae Jeon
a07ef78435 f2fs: introduce f2fs_msg to ease adding information prints
Introduced f2fs_msg function to differentiate f2fs specific messages in
the log. And, added few informative prints in the mount path, to convey
proper error in case of mount failure.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-01-04 09:42:59 +09:00
Linus Torvalds
2318aa2720 f2fs: bug fixes for 3.8-rc2
This patch-set includes two major bug fixes:
 - incorrect IUsed provided by *df -i*, and
 - lookup failure of parent inodes in corner cases.
 
 [Other Bug Fixes]
 - Fix error handling routines
 - Trigger recovery process correctly
 - Resolve build failures due to missing header files
 
 [Etc]
 - Add a MAINTAINERS entry for f2fs
 - Fix and clean up variables, functions, and equations
 - Avoid warnings during compilation
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ3QYaAAoJEEAUqH6CSFDSZwYP/jyx4ilQC5pT85NCBs744JGZ
 zGKcNLlWJcVpSwoepmjEJiMfvYE63imwmsG0gHcnUosvndTivrOkLUPReBE4bLLO
 6KR0J/HWxfRY+FAM6nGfoVDWAG/2mU/cCwDKCwGgAZp//5YmxQZTcp3Xcak6dHUQ
 z64O2XC/roK4w827lwpp7lFBnhY3snpaA+EFGe2Wwm+9r9BrJYP3FyFG9VVRR1Cw
 SQphbZrC2yo+03IN1sJV83QLfKt3+tONhctizAtMzVOVgM2ToVLNbz32SVj8pbnD
 WSMwVWYxVQwC8R9ZhUc2Z3hV+m9m9MswBMyK+U9QF5r/avFK4vKHJYLOcXmpzRcX
 voH5tl7OfVERqfMsle+7X6/Edz5xd4abF4b5yM+3h9pz4LRJYWkp3daeWPY++ZUR
 esM81f0+W55I/mk1STlI7N+KdVn3/Zpqi0UVkcZQ8y15NpOR+5zeLF4+8Skk4NGL
 emYJiho4GB2cpKw7gIQQtnGKSTIPnwRK6Lart7qJ1b2FfNwtJqAgALm7HDxbqSTN
 r3XXJv2E1u9HBu0gEKs5g223Poj7nBLwOQPkmIyx1ozD7bx19vQGnfsHza8a9L1y
 pXQ3dKU3o93+dHjMGky2cpe6B52nuvN+MBicqBSCJAIbSafmp8/JrBiN7hgQFdpj
 x/nXXZd+WPakvjHz03e5
 =dH3T
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs bug fixes from Jaegeuk Kim:
 "This patch-set includes two major bug fixes:
   - incorrect IUsed provided by *df -i*, and
   - lookup failure of parent inodes in corner cases.

  [Other Bug Fixes]
   - Fix error handling routines
   - Trigger recovery process correctly
   - Resolve build failures due to missing header files

  [Etc]
   - Add a MAINTAINERS entry for f2fs
   - Fix and clean up variables, functions, and equations
   - Avoid warnings during compilation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: unify string length declarations and usage
  f2fs: clean up unused variables and return values
  f2fs: clean up the start_bidx_of_node function
  f2fs: remove unneeded variable from f2fs_sync_fs
  f2fs: fix fsync_inode list addition logic and avoid invalid access to memory
  f2fs: remove unneeded initialization of nr_dirty in dirty_seglist_info
  f2fs: handle error from f2fs_iget_nowait
  f2fs: fix equation of has_not_enough_free_secs()
  f2fs: add MAINTAINERS entry
  f2fs: return a default value for non-void function
  f2fs: invalidate the node page if allocation is failed
  f2fs: add missing #include <linux/prefetch.h>
  f2fs: do f2fs_balance_fs in front of dir operations
  f2fs: should recover orphan and fsync data
  f2fs: fix handling errors got by f2fs_write_inode
  f2fs: fix up f2fs_get_parent issue to retrieve correct parent inode number
  f2fs: fix wrong calculation on f_files in statfs
  f2fs: remove set_page_dirty for atomic f2fs_end_io_write
2013-01-03 11:41:43 -08:00
Leon Romanovsky
9836b8b949 f2fs: unify string length declarations and usage
This patch is intended to unify string length declarations and usage.
There are number of calls to strlen which return size_t object.
The size of this object depends on compiler if it will be bigger,
equal or even smaller than an unsigned int

Signed-off-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28 11:27:53 +09:00
Jaegeuk Kim
2b50638dec f2fs: clean up unused variables and return values
This patch cleans up a couple of unnecessary codes related to unused variables
and return values.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28 11:27:52 +09:00
Jaegeuk Kim
ce19a5d432 f2fs: clean up the start_bidx_of_node function
This patch also resolves the following warning reported by kbuild test robot.

fs/f2fs/gc.c: In function 'start_bidx_of_node':
fs/f2fs/gc.c:453:21: warning: 'bidx' may be used uninitialized in this function

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28 11:27:52 +09:00
Namjae Jeon
64c576fe51 f2fs: remove unneeded variable from f2fs_sync_fs
We can directly return '0' from the function, instead of introducing a
'ret' variable.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28 11:27:45 +09:00
Namjae Jeon
fd8bb65f79 f2fs: fix fsync_inode list addition logic and avoid invalid access to memory
In function find_fsync_dnodes() - the fsync inodes gets added to the list, but
in one path suppose f2fs_iget results in error, in such case - error gets added
to the fsync inode list.
In next call to recover_data()->get_fsync_inode()
entry = list_entry(this, struct fsync_inode_entry, list);
                if (entry->inode->i_ino == ino)
This can result in "invalid access to memory" when it encounters 'error' as
entry in the fsync inode list.
So, add the fsync inode entry to the list only in case of no errors.
And, free the object at that point itself in case of issue.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28 11:27:36 +09:00
Namjae Jeon
344324f10f f2fs: remove unneeded initialization of nr_dirty in dirty_seglist_info
Since, the memory for the object of dirty_seglist_info is allocated
using kzalloc - which returns zeroed out memory. So, there is no need
to initialize the nr_dirty values with zeroes.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28 11:27:05 +09:00
Namjae Jeon
06025f4df8 f2fs: handle error from f2fs_iget_nowait
In case f2fs_iget_nowait returns error, it results in truncate_hole being
called with 'error' value as inode pointer. There is no check in truncate_hole
for valid inode, so it could result in crash due "invalid access to memory".
Avoid this by handling error condition properly.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28 11:26:13 +09:00
Jaegeuk Kim
029cd28c1f f2fs: fix equation of has_not_enough_free_secs()
Practically, has_not_enough_free_secs() should calculate with the numbers of
current node and directory data blocks together.
Actually the equation was implemented in need_to_flush().

So, this patch removes need_flush() and moves the equation into
has_not_enough_free_secs().

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28 11:24:10 +09:00
Jaegeuk Kim
12a67146e3 f2fs: return a default value for non-void function
This patch resolves a build warning reported by kbuild test robot.

"
fs/f2fs/segment.c: In function '__get_segment_type':
fs/f2fs/segment.c:806:1: warning: control reaches end of non-void
function [-Wreturn-type]
"

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28 11:24:09 +09:00
Jaegeuk Kim
71e9fec548 f2fs: invalidate the node page if allocation is failed
The new_node_page() is processed as the following procedure.

1. A new node page is allocated.
2. Set PageUptodate with proper footer information.
3. Check if there is a free space for allocation
 4.a. If there is no space, f2fs returns with -ENOSPC.
 4.b. Otherwise, go next.

In the case of step #4.a, f2fs remains a wrong node page in the page cache
with the uptodate flag.

Also, even though a new node page is allocated successfully, an error can be
occurred afterwards due to allocation failure of the other data structures.
In such a case, remove_inode_page() would be triggered, so that we have to
clear uptodate flag in truncate_node() too.

So, we should remove the uptodate flag, if allocation is failed.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28 11:24:09 +09:00
Geert Uytterhoeven
690e4a3ead f2fs: add missing #include <linux/prefetch.h>
m68k allmodconfig:

fs/f2fs/data.c: In function ‘read_end_io’:
fs/f2fs/data.c:311: error: implicit declaration of function ‘prefetchw’

fs/f2fs/segment.c: In function ‘f2fs_end_io_write’:
fs/f2fs/segment.c:628: error: implicit declaration of function ‘prefetchw’

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-28 11:22:43 +09:00
Eric W. Biederman
48c6d1217e f2fs: Don't assign e_id in f2fs_acl_from_disk
With user namespaces enabled building f2fs fails with:

 CC      fs/f2fs/acl.o
fs/f2fs/acl.c: In function ‘f2fs_acl_from_disk’:
fs/f2fs/acl.c:85:21: error: ‘struct posix_acl_entry’ has no member named ‘e_id’
make[2]: *** [fs/f2fs/acl.o] Error 1
make[2]: Target `__build' not remade because of errors.

e_id is a backwards compatibility field only used for file systems
that haven't been converted to use kuids and kgids.  When the posix
acl tag field is neither ACL_USER nor ACL_GROUP assigning e_id is
unnecessary.  Remove the assignment so f2fs will build with user
namespaces enabled.

Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Amit Sahrawat <a.sahrawat@samsung.com>
Acked-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-12-25 20:05:15 -08:00
Jaegeuk Kim
1efef83202 f2fs: do f2fs_balance_fs in front of dir operations
In order to conserve free sections to deal with the worst-case scenarios, f2fs
should be able to freeze all the directory operations especially when there are
not enough free sections. The f2fs_balance_fs() is for this use.

When FS utilization becomes almost 100%, directory operations can be failed due
to -ENOSPC frequently, which produces some dirty node pages occasionally.

Previously, in such a case, f2fs_balance_fs() is not able to be triggered since
it is triggered only if the directory operation ends up with success.

So, this patch triggers f2fs_balance_fs() at first before handling directory
operations.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-26 10:39:52 +09:00
Jaegeuk Kim
30f0c75858 f2fs: should recover orphan and fsync data
The recovery routine should do all the time regardless of normal umount action.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-26 10:39:52 +09:00
Jaegeuk Kim
398b1ac5a5 f2fs: fix handling errors got by f2fs_write_inode
Ruslan reported that f2fs hangs with an infinite loop in f2fs_sync_file():

	while (sync_node_pages(sbi, inode->i_ino, &wbc) == 0)
		f2fs_write_inode(inode, NULL);

The reason was revealed that the cold flag is not set even thought this inode is
a normal file. Therefore, sync_node_pages() skips to write node blocks since it
only writes cold node blocks.

The cold flag is stored to the node_footer in node block, and whenever a new
node page is allocated, it is set according to its file type, file or directory.

But, after sudden-power-off, when recovering the inode page, f2fs doesn't recover
its cold flag.

So, let's assign the cold flag in more right places.

One more thing:
If f2fs_write_inode() returns an error due to whatever situations, there would
be no dirty node pages so that sync_node_pages() returns zero.
(i.e., zero means nothing was written.)

Reported-by: Ruslan N. Marchenko <me@ruff.mobi>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-26 10:39:52 +09:00
Namjae Jeon
38e0abdcfb f2fs: fix up f2fs_get_parent issue to retrieve correct parent inode number
Test Case:
[NFS Client]
ls -lR .

[NFS Server]
while [ 1 ]
do
echo 3 > /proc/sys/vm/drop_caches
done

Error on NFS Client: "No such file or directory"

When cache is dropped at the server, it results in lookup failure at the
NFS client due to non-connection with the parent. The default path is it
initiates a lookup by calculating the hash value for the name, even though
the hash values stored on the disk for "." and ".." is maintained as zero,
which results in failure from find_in_block due to not matching HASH values.
Fix up, by using the correct hashing values for these entries.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-26 10:39:52 +09:00
Jaegeuk Kim
1362b5e347 f2fs: fix wrong calculation on f_files in statfs
In f2fs_statfs(), f_files should be the total number of available inodes
instead of the currently allocated inodes.
So, this patch should resolve the reported bug below.

Note that, showing 10% usage is not a bug, since f2fs reveals whole volume size
as much as possible and shows the space overhead as *used*.
This policy is fair enough with respect to other file systems.

<Reported Bug>
(loop0 is backed by 1GiB file)

$ mkfs.f2fs /dev/loop0

F2FS-tools: Ver: 1.1.0 (2012-12-11)
Info: sector size = 512
Info: total sectors = 2097152 (in 512bytes)
Info: zone aligned segment0 blkaddr: 512
Info: format successful

$ mount /dev/loop0 mnt/

$ df mnt/
Filesystem     1K-blocks  Used Available Use% Mounted on
/dev/loop0       1046528 98312    929784  10%
/home/zeta/linux-devel/mtd-bench/mnt

$ df mnt/ -i
Filesystem     Inodes   IUsed  IFree IUse% Mounted on
/dev/loop0       1 -465918 465919     - /home/zeta/linux-devel/mtd-bench/mnt

Notice IUsed is negative. Also, 10% usage on a fresh f2fs seems too
much to be correct.

Reported-and-Tested-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-26 10:39:51 +09:00
Jaegeuk Kim
dfb7c0ceab f2fs: remove set_page_dirty for atomic f2fs_end_io_write
We should guarantee not to do *scheduling while atomic*.
I found, in atomic f2fs_end_io_write(), there is a set_page_dirty() call
to deal with IO errors.

But, set_page_dirty() calls:
 -> f2fs_set_data_page_dirty()
   -> set_dirty_dir_page()
      -> cond_resched() which results in scheduling.

In order to avoid this, I'd like to remove simply set_page_dirty(),
since the page is already marked as ERROR and f2fs will be operated
as the read-only mode as well.
So, there is no recovery issue with this.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-26 10:39:51 +09:00
Jaegeuk Kim
6666e6aa9f f2fs: fix tracking parent inode number
Previously, f2fs didn't track the parent inode number correctly which is stored
in each f2fs_inode. In the case of the following scenario, a bug can be occured.

Let's suppose there are one directory, "/b", and two files, "/a" and "/b/a".
 - pino of "/a" is ROOT_INO.
 - pino of "/b/a" is DIR_B_INO.

Then,
 # sync
  : The inode pages of "/a" and "/b/a" contain the parent inode numbers as
    ROOT_INO and DIR_B_INO respectively.
 # mv /a /b/a
  : The parent inode number of "/a" should be changed to DIR_B_INO, but f2fs
    didn't do that. Ref. f2fs_set_link().

In order to fix this clearly, I added i_pino in f2fs_inode_info, and whenever
it needs to be changed like in f2fs_add_link() and f2fs_set_link(), it is
updated temporarily in f2fs_inode_info.

And later, f2fs_write_inode() stores the latest information to the inode pages.
For power-off-recovery, f2fs_sync_file() triggers simply f2fs_write_inode().

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-12-11 13:43:45 +09:00
Jaegeuk Kim
3cd8a23948 f2fs: cleanup the f2fs_bio_alloc routine
Do cleanup more for better code readability.

- Change the parameter set of f2fs_bio_alloc()
  This function should allocate a bio only since it is not something like
  f2fs_bio_init(). Instead, the caller should initialize the allocated bio.

- Introduce SECTOR_FROM_BLOCK
  This macro translates a block address to its sector address.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
2012-12-11 13:43:45 +09:00
Namjae Jeon
457d08ee4f f2fs: introduce accessor to retrieve number of dentry slots
Simplify code by providing the accessor macro to retrieve the
number of dentry slots for a given filename length.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11 13:43:45 +09:00
Namjae Jeon
508198be3c f2fs: remove redundant call to f2fs_put_page in delete entry
Since, we anyway need to put the page after deleting entry. So, there is no
need to make same call under different conditions.
Move out the f2fs_put_page from the two conditions and call at once.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11 13:43:44 +09:00
Namjae Jeon
a0d42539e1 f2fs: make use of GFP_F2FS_ZERO for setting gfp_mask
Since, GFP_NOFS and __GFP_ZERO is being used to set gfp_mask.
We can instead make use of already predefined macro GFP_F2FS_ZERO.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11 13:43:44 +09:00
Namjae Jeon
c212991a6b f2fs: rewrite f2fs_bio_alloc to make it simpler
Since, GFP_NOFS(__GFP_WAIT) is used for allocation requests of bio in f2fs.
So, there is no chance of returning NULL from the BIO allocation.

Making the bio allocation routine for f2fs simpler.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11 13:43:44 +09:00
Wei Yongjun
705f814e34 f2fs: remove unused variable
The variables node_page and page_offset are initialized but never used
otherwise, so remove those unused variables.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2012-12-11 13:43:44 +09:00
Namjae Jeon
61412b64b9 f2fs: move error condition for mkdir at proper place
In function f2fs_mkdir, err is being initialized without even checking
if there was any error in new inode creation. So, instead check the
inode error and make use of error/return condition.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11 13:43:44 +09:00
Namjae Jeon
1042d60f91 f2fs: remove unneeded initialization
No need to initialize  "struct f2fs_gc_kthread *gc_th = NULL",
as gc_th = NULL, will be taken care by the return values of kmalloc().
And fix codes in other places.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11 13:43:44 +09:00
Namjae Jeon
1fa95b0b67 f2fs: check read only condition before beginning write out
If the filesystem is mounted as read-only then return from that point itself
instead of first doing a writeout/wait and then checking for read-only
condition.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
2012-12-11 13:43:43 +09:00