Commit Graph

24968 Commits

Author SHA1 Message Date
H Hartley Sweeten
0c6d4b4e22 ceph/super.c: quiet sparse noise
Quiet the sparse noise:

warning: symbol 'create_fs_client' was not declared. Should it be static?
warning: symbol 'destroy_fs_client' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Sage Weil <sage@newdream.net>
ceph-devel@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-05 21:10:12 -07:00
H Hartley Sweeten
7fd7d101ff ceph/mds_client.c: quiet sparse noise
Quiet the following sparse noise:

warning: symbol 'get_nonsnap_parent' was not declared. Should it be static?
warning: symbol 'done_closing_sessions' was not declared. Should it be static?

Local functions don't need external visability. Make them static.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Sage Weil <sage@newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-05 21:10:11 -07:00
Sage Weil
c6ffe10015 ceph: use new D_COMPLETE dentry flag
We used to use a flag on the directory inode to track whether the dcache
contents for a directory were a complete cached copy.  Switch to a dentry
flag CEPH_D_COMPLETE that is safely updated by ->d_prune().

Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-05 21:10:10 -07:00
Dan McGee
5c8a0fbba5 VFS: fix statfs() automounter semantics regression
No one in their right mind would expect statfs() to not work on a
automounter managed mount point. Fix it.

[ I'm not sure about the "no one in their right mind" part.  It's not
  mounted, and you didn't ask for it to be mounted.  But nobody will
  really care, and this probably makes it match previous semantics, so..
      - Linus ]

This mirrors the fix made to the quota code in 815d405cef.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-04 18:15:59 -07:00
Linus Torvalds
3d0a8d10cf Merge branch 'for-3.2/drivers' of git://git.kernel.dk/linux-block
* 'for-3.2/drivers' of git://git.kernel.dk/linux-block: (30 commits)
  virtio-blk: use ida to allocate disk index
  hpsa: add small delay when using PCI Power Management to reset for kump
  cciss: add small delay when using PCI Power Management to reset for kump
  xen/blkback: Fix two races in the handling of barrier requests.
  xen/blkback: Check for proper operation.
  xen/blkback: Fix the inhibition to map pages when discarding sector ranges.
  xen/blkback: Report VBD_WSECT (wr_sect) properly.
  xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests.
  xen-blkfront: plug device number leak in xlblk_init() error path
  xen-blkfront: If no barrier or flush is supported, use invalid operation.
  xen-blkback: use kzalloc() in favor of kmalloc()+memset()
  xen-blkback: fixed indentation and comments
  xen-blkfront: fix a deadlock while handling discard response
  xen-blkfront: Handle discard requests.
  xen-blkback: Implement discard requests ('feature-discard')
  xen-blkfront: add BLKIF_OP_DISCARD and discard request struct
  drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd()
  drivers/block/loop.c: emit uevent on auto release
  drivers/block/cpqarray.c: use pci_dev->revision
  loop: always allow userspace partitions and optionally support automatic scanning
  ...

Fic up trivial header file includsion conflict in drivers/block/loop.c
2011-11-04 17:22:14 -07:00
Linus Torvalds
b4fdcb02f1 Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-block
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits)
  block: don't call blk_drain_queue() if elevator is not up
  blk-throttle: use queue_is_locked() instead of lockdep_is_held()
  blk-throttle: Take blkcg->lock while traversing blkcg->policy_list
  blk-throttle: Free up policy node associated with deleted rule
  block: warn if tag is greater than real_max_depth.
  block: make gendisk hold a reference to its queue
  blk-flush: move the queue kick into
  blk-flush: fix invalid BUG_ON in blk_insert_flush
  block: Remove the control of complete cpu from bio.
  block: fix a typo in the blk-cgroup.h file
  block: initialize the bounce pool if high memory may be added later
  block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown
  block: drop @tsk from attempt_plug_merge() and explain sync rules
  block: make get_request[_wait]() fail if queue is dead
  block: reorganize throtl_get_tg() and blk_throtl_bio()
  block: reorganize queue draining
  block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg()
  block: pass around REQ_* flags instead of broken down booleans during request alloc/free
  block: move blk_throtl prototypes to block/blk.h
  block: fix genhd refcounting in blkio_policy_parse_and_set()
  ...

Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion
and making the request functions be of type "void" instead of "int" in
 - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c}
 - drivers/staging/zram/zram_drv.c
2011-11-04 17:06:58 -07:00
Linus Torvalds
044595d4e4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next:
  Squashfs: Add an option to set dev block size to 4K
2011-11-04 16:48:37 -07:00
Jeff Layton
0486958f57 nfs: move nfs_file_operations declaration to bottom of file.c (try #2)
...a remove a set of forward declarations.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-04 16:39:11 -04:00
Jeff Layton
1788ea6e3b nfs: when attempting to open a directory, fall back on normal lookup (try #5)
commit d953126 changed how nfs_atomic_lookup handles an -EISDIR return
from an OPEN call. Prior to that patch, that caused the client to fall
back to doing a normal lookup. When that patch went in, the code began
returning that error to userspace. The d_revalidate codepath however
never had the corresponding change, so it was still possible to end up
with a NULL ctx->state pointer after that.

That patch caused a regression. When we attempt to open a directory that
does not have a cached dentry, that open now errors out with EISDIR. If
you attempt the same open with a cached dentry, it will succeed.

Fix this by reverting the change in nfs_atomic_lookup and allowing
attempts to open directories to fall back to a normal lookup

Also, add a NFSv4-specific f_ops->open routine that just returns
-ENOTDIR. This should never be called if things are working properly,
but if it ever is, then the dprintk may help in debugging.

To facilitate this, a new file_operations field is also added to the
nfs_rpc_ops struct.

Cc: stable@kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-04 16:39:04 -04:00
Linus Torvalds
6736c04799 Merge branch 'nfs-for-3.2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
* 'nfs-for-3.2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (25 commits)
  nfs: set vs_hidden on nfs4_callback_version4 (try #2)
  pnfs-obj: Support for RAID5 read-4-write interface.
  pnfs-obj: move to ore 03: Remove old raid engine
  pnfs-obj: move to ore 02: move to ORE
  pnfs-obj: move to ore 01: ore_layout & ore_components
  pnfs-obj: Rename objlayout_io_state => objlayout_io_res
  pnfs-obj: Get rid of objlayout_{alloc,free}_io_state
  pnfs-obj: Return PNFS_NOT_ATTEMPTED in case of read/write_pagelist
  pnfs-obj: Remove redundant EOF from objlayout_io_state
  nfs: Remove unused variable from write.c
  nfs: Fix unused variable warning from file.c
  NFS: Remove no-op less-than-zero checks on unsigned variables.
  NFS: Clean up nfs4_xdr_dec_secinfo()
  NFS: Fix documenting comment for nfs_create_request()
  NFS4: fix cb_recallany decode error
  nfs4: serialize layoutcommit
  SUNRPC: remove rpcbind clients destruction on module cleanup
  SUNRPC: remove rpcbind clients creation during service registering
  NFSd: call svc rpcbind cleanup explicitly
  SUNRPC: cleanup service destruction
  ...
2011-11-04 12:27:43 -07:00
Jeff Layton
6070295efc nfs: set vs_hidden on nfs4_callback_version4 (try #2)
This service should not be registered with or unregistered from rpcbind.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-04 09:00:09 -04:00
Pavel Shilovsky
a88b470773 CIFS: Cleanup byte-range locking code style
Reorder parms of cifs_lock_init, trivially simplify getlk code and
remove extra {} in cifs_lock_add_if.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-11-04 00:53:21 -05:00
Pavel Shilovsky
161ebf9fcc CIFS: Simplify setlk error handling for mandatory locking
Now we allocate a lock structure at first, then we request to the server
and save the lock if server returned OK though void function - it prevents
the situation when we locked a file on the server and then return -ENOMEM
from setlk.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-11-04 00:53:15 -05:00
Linus Torvalds
1a67a573b8 Merge git://git.samba.org/sfrench/cifs-2.6
* git://git.samba.org/sfrench/cifs-2.6:
  cifs: Assume passwords are encoded according to iocharset (try #2)
  CIFS: Fix the VFS brlock cache usage in posix locking case
  [CIFS] Update cifs version to 1.76
  CIFS: Remove extra mutex_unlock in cifs_lock_add_if
2011-11-03 21:07:58 -07:00
Sage Weil
b58dc4100b ceph: clear parent D_COMPLETE flag when on dentry prune
When the VFS prunes a dentry from the cache, clear the D_COMPLETE flag
on the parent dentry.  Do this for the live and snapshotted namespaces. Do
not bother for the .snap dir contents, since we do not cache that.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-03 09:23:49 -07:00
Trond Myklebust
31cbecb4ab Merge branch 'osd-devel' into nfs-for-next 2011-11-02 23:56:40 -04:00
Boaz Harrosh
278c023a99 pnfs-obj: Support for RAID5 read-4-write interface.
The ore need suplied a r4w_get_page/r4w_put_page API
from Filesystem so it can get cache pages to read-into when
writing parial stripes.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:09 -04:00
Boaz Harrosh
04291b628c pnfs-obj: move to ore 03: Remove old raid engine
Finally remove all the old raid engine, which is by now
dead code.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:08 -04:00
Boaz Harrosh
eecfc6312a pnfs-obj: move to ore 02: move to ORE
In this patch we are actually moving to the ORE.
(Object Raid Engine).

objio_state holds a pointer to an ore_io_state. Once
we have an ore_io_state at hand we can call the ore
for reading/writing. We register on the done path
to kick off the nfs io_done mechanism.

Again for Ease of reviewing the old code is "#if 0"
but is not removed so the diff command works better.
The old code will be removed in the next patch.

fs/exofs/Kconfig::ORE is modified to also be auto-included
if PNFS_OBJLAYOUT is set. Since we now depend on ORE.
(See comments in fs/exofs/Kconfig)

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:08 -04:00
Boaz Harrosh
af4f5b54bc pnfs-obj: move to ore 01: ore_layout & ore_components
For Ease of reviewing I split the move to ore into 3 parts
	move to ore 01: ore_layout & ore_components
	move to ore 02: move to ORE
	move to ore 03: Remove old raid engine

This patch modifies the objio_lseg, layout-segment level
and devices and components arrays to use the ORE types.

Though it will be removed soon, also the raid engine
is modified to actually compile, possibly run, with
the new types. So it is the same old raid engine but
with some new ORE types.

For Ease of reviewing, some of the old code is
"#if 0" but is not removed so the diff command works
better. The old code will be removed in the 3rd patch.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:07 -04:00
Boaz Harrosh
e2e04355d9 pnfs-obj: Rename objlayout_io_state => objlayout_io_res
* All instances of objlayout_io_state => objlayout_io_res
* All instances of state => oir;
* All instances of ol_state => oir;

Big but nothing to it

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:06 -04:00
Boaz Harrosh
96218556b0 pnfs-obj: Get rid of objlayout_{alloc,free}_io_state
This is part of moving objio_osd to use the ORE.

objlayout_io_state had two functions:
1. It was used in the error reporting mechanism at layout_return.
   This function is kept intact.
   (Later patch will rename objlayout_io_state => objlayout_io_res)
2. Carrier of rw io members into the objio_read/write_paglist API.
   This is removed in this patch.

The {r,w}data received from NFS are passed directly to the
objio_{read,write}_paglist API. The io_engine is now allocating
it's own IO state as part of the read/write. The minimal
functionality that was part of the generic allocation is passed
to the io_engine.

So part of this patch is rename of:
	ios->ol_state.foo => ios->foo

At objlayout_{read,write}_done an objlayout_io_state is passed that
denotes the result of the IO. (Hence the later name change).
If the IO is successful objlayout calls an objio_free_result() API
immediately (Which for objio_osd causes the release of the io_state).
If the IO ended in an error it is hanged onto until reported in
layout_return and is released later through the objio_free_result()
API. (All this is not new just renamed and cleaned)

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:05 -04:00
Boaz Harrosh
e6c40fe3f4 pnfs-obj: Return PNFS_NOT_ATTEMPTED in case of read/write_pagelist
objlayout driver was always returning PNFS_ATTEMPTED from it's
read/write_pagelist operations. Even on error. Fix that.

Start by establishing an error return API from io-engine, by
not returning ssize_t (length-or-error) but returning "int"
0=OK, 0>Error. And clean up all return types in io-engine.

Then if io-engine returned error return PNFS_NOT_ATTEMPTED
to generic layer. (With a dprint)

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:03 -04:00
Boaz Harrosh
4cdc685c7d pnfs-obj: Remove redundant EOF from objlayout_io_state
The EOF calculation was done on .read_pagelist(), cached
in objlayout_io_state->eof, and set in objlayout_read_done()
into nfs_read_data->res.eof.

So set it directly into nfs_read_data->res.eof and avoid
the extra member.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:56:00 -04:00
Rakib Mullick
2b72c9ccd2 nfs: Remove unused variable from write.c
When CONFIG_NFS=y and CONFIG_NFS_V3_{,V4}=n we get the following warning.

	fs/nfs/write.c: In function ‘nfs_writeback_done’:
	fs/nfs/write.c:1246:21: warning: unused variable ‘server’

 Remove the variable 'server' to fix the above warning.

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:50:24 -04:00
Rakib Mullick
6f276e49fd nfs: Fix unused variable warning from file.c
Fix the following unused variable warning.

fs/nfs/file.c: In function ‘nfs_file_release’:
fs/nfs/file.c:140:17: warning: unused variable ‘dentry’
fs/nfs/file.c: In function ‘nfs_file_read’:
fs/nfs/file.c:237:9: warning: unused variable ‘count’

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-11-02 23:49:09 -04:00
Linus Torvalds
06ef93e1b8 Merge branch 'for-3.2' of git://linux-nfs.org/~bfields/linux
* 'for-3.2' of git://linux-nfs.org/~bfields/linux:
  nfsd4: typo logical vs bitwise negate in nfsd4_decode_share_access
2011-11-02 16:54:36 -07:00
Linus Torvalds
092f4c56c1 Merge branch 'akpm' (Andrew's incoming - part two)
Says Andrew:

 "60 patches.  That's good enough for -rc1 I guess.  I have quite a lot
  of detritus to be rechecked, work through maintainers, etc.

 - most of the remains of MM
 - rtc
 - various misc
 - cgroups
 - memcg
 - cpusets
 - procfs
 - ipc
 - rapidio
 - sysctl
 - pps
 - w1
 - drivers/misc
 - aio"

* akpm: (60 commits)
  memcg: replace ss->id_lock with a rwlock
  aio: allocate kiocbs in batches
  drivers/misc/vmw_balloon.c: fix typo in code comment
  drivers/misc/vmw_balloon.c: determine page allocation flag can_sleep outside loop
  w1: disable irqs in critical section
  drivers/w1/w1_int.c: multiple masters used same init_name
  drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal
  drivers/power/ds2780_battery.c: add a nolock function to w1 interface
  drivers/power/ds2780_battery.c: create central point for calling w1 interface
  w1: ds2760 and ds2780, use ida for id and ida_simple_get() to get it
  pps gpio client: add missing dependency
  pps: new client driver using GPIO
  pps: default echo function
  include/linux/dma-mapping.h: add dma_zalloc_coherent()
  sysctl: make CONFIG_SYSCTL_SYSCALL default to n
  sysctl: add support for poll()
  RapidIO: documentation update
  drivers/net/rionet.c: fix ethernet address macros for LE platforms
  RapidIO: fix potential null deref in rio_setup_device()
  RapidIO: add mport driver for Tsi721 bridge
  ...
2011-11-02 16:07:27 -07:00
Jeff Moyer
080d676de0 aio: allocate kiocbs in batches
In testing aio on a fast storage device, I found that the context lock
takes up a fair amount of cpu time in the I/O submission path.  The reason
is that we take it for every I/O submitted (see __aio_get_req).  Since we
know how many I/Os are passed to io_submit, we can preallocate the kiocbs
in batches, reducing the number of times we take and release the lock.

In my testing, I was able to reduce the amount of time spent in
_raw_spin_lock_irq by .56% (average of 3 runs).  The command I used to
test this was:

   aio-stress -O -o 2 -o 3 -r 8 -d 128 -b 32 -i 32 -s 16384 <dev>

I also tested the patch with various numbers of events passed to
io_submit, and I ran the xfstests aio group of tests to ensure I didn't
break anything.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Daniel Ehrenberg <dehrenberg@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02 16:07:03 -07:00
Lucas De Marchi
f1ecf06854 sysctl: add support for poll()
Adding support for poll() in sysctl fs allows userspace to receive
notifications of changes in sysctl entries.  This adds a infrastructure to
allow files in sysctl fs to be pollable and implements it for hostname and
domainname.

[akpm@linux-foundation.org: s/declare/define/ for definitions]
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Greg KH <gregkh@suse.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02 16:07:02 -07:00
Vasiliy Kulikov
aa6afca5bc proc: fix races against execve() of /proc/PID/fd**
fd* files are restricted to the task's owner, and other users may not get
direct access to them.  But one may open any of these files and run any
setuid program, keeping opened file descriptors.  As there are permission
checks on open(), but not on readdir() and read(), operations on the kept
file descriptors will not be checked.  It makes it possible to violate
procfs permission model.

Reading fdinfo/* may disclosure current fds' position and flags, reading
directory contents of fdinfo/ and fd/ may disclosure the number of opened
files by the target task.  This information is not sensible per se, but it
can reveal some private information (like length of a password stored in a
file) under certain conditions.

Used existing (un)lock_trace functions to check for ptrace_may_access(),
but instead of using EPERM return code from it use EACCES to be consistent
with existing proc_pid_follow_link()/proc_pid_readlink() return code.  If
they differ, attacker can guess what fds exist by analyzing stat() return
code.  Patched handlers: stat() for fd/*, stat() and read() for fdindo/*,
readdir() and lookup() for fd/ and fdinfo/.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02 16:07:00 -07:00
Pavel Emelyanov
887df07891 procfs: report EISDIR when reading sysctl dirs in proc
On reading sysctl dirs we should return -EISDIR instead of -EINVAL.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02 16:07:00 -07:00
Phillip Lougher
434a964daa hfs: fix hfs_find_init() sb->ext_tree NULL ptr oops
Clement Lecigne reports a filesystem which causes a kernel oops in
hfs_find_init() trying to dereference sb->ext_tree which is NULL.

This proves to be because the filesystem has a corrupted MDB extent
record, where the extents file does not fit into the first three extents
in the file record (the first blocks).

In hfs_get_block() when looking up the blocks for the extent file
(HFS_EXT_CNID), it fails the first blocks special case, and falls
through to the extent code (which ultimately calls hfs_find_init())
which is in the process of being initialised.

Hfs avoids this scenario by always having the extents b-tree fitting
into the first blocks (the extents B-tree can't have overflow extents).

The fix is to check at mount time that the B-tree fits into first
blocks, i.e.  fail if HFS_I(inode)->alloc_blocks >=
HFS_I(inode)->first_blocks

Note, the existing commit 47f365eb57 ("hfs: fix oops on mount with
corrupted btree extent records") becomes subsumed into this as a special
case, but only for the extents B-tree (HFS_EXT_CNID), it is perfectly
acceptable for the catalog B-Tree file to grow beyond three extents,
with the remaining extent descriptors in the extents overfow.

This fixes CVE-2011-2203

Reported-by: Clement LECIGNE <clement.lecigne@netasq.com>
Signed-off-by: Phillip Lougher <plougher@redhat.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02 16:06:59 -07:00
Namjae Jeon
3069083cc8 isofs: add readpages support
Use mpage_readpages() instead of multiple calls to isofs_readpage() to
reduce the CPU utilization and make performance higher.

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02 16:06:59 -07:00
Richard Weinberger
0620d9193c ramfs: remove module leftovers
Since ramfs is hard-selected to "y", the module leftovers make no sense.

Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02 16:06:58 -07:00
Jiri Kosina
a3defbe5c3 binfmt_elf: fix PIE execution with randomization disabled
The case of address space randomization being disabled in runtime through
randomize_va_space sysctl is not treated properly in load_elf_binary(),
resulting in SIGKILL coming at exec() time for certain PIE-linked binaries
in case the randomization has been disabled at runtime prior to calling
exec().

Handle the randomize_va_space == 0 case the same way as if we were not
supporting .text randomization at all.

Based on original patch by H.J. Lu and Josh Boyer.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: H.J. Lu <hongjiu.lu@intel.com>
Cc: <stable@kernel.org>
Tested-by: Josh Boyer <jwboyer@redhat.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02 16:06:58 -07:00
Linus Torvalds
d211858837 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue:
  vfs: add d_prune dentry operation
  vfs: protect i_nlink
  filesystems: add set_nlink()
  filesystems: add missing nlink wrappers
  logfs: remove unnecessary nlink setting
  ocfs2: remove unnecessary nlink setting
  jfs: remove unnecessary nlink setting
  hypfs: remove unnecessary nlink setting
  vfs: ignore error on forced remount
  readlinkat: ensure we return ENOENT for the empty pathname for normal lookups
  vfs: fix dentry leak in simple_fill_super()
2011-11-02 11:41:01 -07:00
Phillip Lougher
7657cacf47 Squashfs: Add an option to set dev block size to 4K
This commit adds an option to set the device block size used to 4K.

By default Squashfs sets the device block size (sb_min_blocksize) to 1K
or the smallest block size supported by the block device (if larger).
This, because blocks are packed together and unaligned in Squashfs,
should reduce latency.

This, however, gives poor performance on MTD NAND devices where
the optimal I/O size is 4K (even though the devices can support
smaller block sizes).

Using a 4K device block size may also improve overall I/O
performance for some file access patterns (e.g. sequential
accesses of files in filesystem order) on all media.

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2011-11-02 17:25:50 +00:00
Linus Torvalds
f1f8935a5c Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (97 commits)
  jbd2: Unify log messages in jbd2 code
  jbd/jbd2: validate sb->s_first in journal_get_superblock()
  ext4: let ext4_ext_rm_leaf work with EXT_DEBUG defined
  ext4: fix a syntax error in ext4_ext_insert_extent when debugging enabled
  ext4: fix a typo in struct ext4_allocation_context
  ext4: Don't normalize an falloc request if it can fit in 1 extent.
  ext4: remove comments about extent mount option in ext4_new_inode()
  ext4: let ext4_discard_partial_buffers handle unaligned range correctly
  ext4: return ENOMEM if find_or_create_pages fails
  ext4: move vars to local scope in ext4_discard_partial_page_buffers_no_lock()
  ext4: Create helper function for EXT4_IO_END_UNWRITTEN and i_aiodio_unwritten
  ext4: optimize locking for end_io extent conversion
  ext4: remove unnecessary call to waitqueue_active()
  ext4: Use correct locking for ext4_end_io_nolock()
  ext4: fix race in xattr block allocation path
  ext4: trace punch_hole correctly in ext4_ext_map_blocks
  ext4: clean up AGGRESSIVE_TEST code
  ext4: move variables to their scope
  ext4: fix quota accounting during migration
  ext4: migrate cleanup
  ...
2011-11-02 10:06:20 -07:00
Linus Torvalds
34116645d9 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Cleanup metadata flags handling
  udf: Skip mirror metadata FE loading when metadata FE is ok
  ext3: Allow quota file use root reservation
  udf: Remove web reference from UDF MAINTAINERS entry
  quota: Drop path reference on error exit from quotactl
  udf: Neaten udf_debug uses
  udf: Neaten logging output, use vsprintf extension %pV
  udf: Convert printks to pr_<level>
  udf: Rename udf_warning to udf_warn
  udf: Rename udf_error to udf_err
  udf: Promote some debugging messages to udf_error
  ext3: Remove the obsolete broken EXT3_IOC32_WAIT_FOR_READONLY.
  udf: Add readpages support for udf.
  ext3/balloc.c: local functions should be static
  ext2: fix the outdated comment in ext2_nfs_get_inode()
  ext3: remove deprecated oldalloc
  fs/ext3/balloc.c: delete useless initialization
  fs/ext2/balloc.c: delete useless initialization
  ext3: fix message in ext3_remount for rw-remount case
  ext3: Remove i_mutex from ext3_sync_file()

Fix up trivial (printf format cleanup) conflicts in fs/udf/udfdecl.h
2011-11-02 10:05:22 -07:00
Linus Torvalds
de0a5345a5 Merge branch 'for-linus' of git://github.com/richardweinberger/linux
* 'for-linus' of git://github.com/richardweinberger/linux: (90 commits)
  um: fix ubd cow size
  um: Fix kmalloc argument order in um/vdso/vma.c
  um: switch to use of drivers/Kconfig
  UserModeLinux-HOWTO.txt: fix a typo
  UserModeLinux-HOWTO.txt: remove ^H characters
  um: we need sys/user.h only on i386
  um: merge delay_{32,64}.c
  um: distribute exports to where exported stuff is defined
  um: kill system-um.h
  um: generic ftrace.h will do...
  um: segment.h is x86-only and needed only there
  um: asm/pda.h is not needed anymore
  um: hw_irq.h can go generic as well
  um: switch to generic-y
  um: clean Kconfig up a bit
  um: a couple of missing dependencies...
  um: kill useless argument of free_chan() and free_one_chan()
  um: unify ptrace_user.h
  um: unify KSTK_...
  um: fix gcov build breakage
  ...
2011-11-02 09:45:39 -07:00
Al Viro
548fd1e8db um: kill useless include of user.h
everything in USER_OBJ gets it via -include user.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
2011-11-02 14:15:13 +01:00
Sage Weil
f0023bc617 vfs: add d_prune dentry operation
This adds a d_prune dentry operation that is called by the VFS prior to
pruning (i.e. unhashing and killing) a hashed dentry from the dcache.
Wrap dentry_lru_del() and use the new _prune() helper in the cases where we
are about to unhash and kill the dentry.

This will be used by Ceph to maintain a flag indicating whether the
complete contents of a directory are contained in the dcache, allowing it
to satisfy lookups and readdir without addition server communication.

Renumber a few DCACHE_* #defines to group DCACHE_OP_PRUNE with the other
DCACHE_OP_ bits.

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02 12:53:43 +01:00
Miklos Szeredi
a78ef704a8 vfs: protect i_nlink
Prevent direct modification of i_nlink by making it const and adding a
non-const __i_nlink alias.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02 12:53:43 +01:00
Miklos Szeredi
bfe8684869 filesystems: add set_nlink()
Replace remaining direct i_nlink updates with a new set_nlink()
updater function.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02 12:53:43 +01:00
Miklos Szeredi
6d6b77f163 filesystems: add missing nlink wrappers
Replace direct i_nlink updates with the respective updater function
(inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count).

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2011-11-02 12:53:43 +01:00
Miklos Szeredi
dd2a981f46 logfs: remove unnecessary nlink setting
alloc_inode() initializes i_nlink to 1.  Remove unnecessary
re-initialization.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Joern Engel <joern@logfs.org>
CC: Prasad Joshi <prasadjoshi.linux@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02 12:53:42 +01:00
Miklos Szeredi
a7732b05f7 ocfs2: remove unnecessary nlink setting
alloc_inode() initializes i_nlink to 1.  Remove unnecessary
re-initialization.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Joel Becker <jlbec@evilplan.org>
CC: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02 12:53:42 +01:00
Miklos Szeredi
c818b682c9 jfs: remove unnecessary nlink setting
alloc_inode() initializes i_nlink to 1.  Remove unnecessary
re-initialization.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02 12:53:42 +01:00
Miklos Szeredi
2833eb2b46 vfs: ignore error on forced remount
On emergency remount we want to force MS_RDONLY on the super block
even if ->remount_fs() failed for some reason.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02 12:53:42 +01:00
Andy Whitcroft
1fa1e7f615 readlinkat: ensure we return ENOENT for the empty pathname for normal lookups
Since the commit below which added O_PATH support to the *at() calls, the
error return for readlink/readlinkat for the empty pathname has switched
from ENOENT to EINVAL:

  commit 65cfc67223
  Author: Al Viro <viro@zeniv.linux.org.uk>
  Date:   Sun Mar 13 15:56:26 2011 -0400

    readlinkat(), fchownat() and fstatat() with empty relative pathnames

This is both unexpected for userspace and makes readlink/readlinkat
inconsistant with all other interfaces; and inconsistant with our stated
return for these pathnames.

As the readlinkat call does not have a flags parameter we cannot use the
AT_EMPTY_PATH approach used in the other calls.  Therefore expose whether
the original path is infact entry via a new user_path_at_empty() path
lookup function.  Use this to determine whether to default to EINVAL or
ENOENT for failures.

Addresses http://bugs.launchpad.net/bugs/817187

[akpm@linux-foundation.org: remove unused getname_flags()]
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02 12:53:42 +01:00
Konstantin Khlebnikov
32096ea1aa vfs: fix dentry leak in simple_fill_super()
put dentry if inode allocation failed, d_genocide() cannot release it

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02 12:53:42 +01:00
Eryu Guan
f2a44523b2 jbd2: Unify log messages in jbd2 code
Some jbd2 code prints out kernel messages with "JBD2: " prefix, at the
same time other jbd2 code prints with "JBD: " prefix. Unify the prefix
to "JBD2: ".

Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-11-01 19:09:18 -04:00
Eryu Guan
8762202dd0 jbd/jbd2: validate sb->s_first in journal_get_superblock()
I hit a J_ASSERT(blocknr != 0) failure in cleanup_journal_tail() when
mounting a fsfuzzed ext3 image. It turns out that the corrupted ext3
image has s_first = 0 in journal superblock, and the 0 is passed to
journal->j_head in journal_reset(), then to blocknr in
cleanup_journal_tail(), in the end the J_ASSERT failed.

So validate s_first after reading journal superblock from disk in
journal_get_superblock() to ensure s_first is valid.

The following script could reproduce it:

fstype=ext3
blocksize=1024
img=$fstype.img
offset=0
found=0
magic="c0 3b 39 98"

dd if=/dev/zero of=$img bs=1M count=8
mkfs -t $fstype -b $blocksize -F $img
filesize=`stat -c %s $img`
while [ $offset -lt $filesize ]
do
        if od -j $offset -N 4 -t x1 $img | grep -i "$magic";then
                echo "Found journal: $offset"
                found=1
                break
        fi
        offset=`echo "$offset+$blocksize" | bc`
done

if [ $found -ne 1 ];then
        echo "Magic \"$magic\" not found"
        exit 1
fi

dd if=/dev/zero of=$img seek=$(($offset+23)) conv=notrunc bs=1 count=1

mkdir -p ./mnt
mount -o loop $img ./mnt

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-11-01 19:04:59 -04:00
Yongqiang Yang
bf52c6f7af ext4: let ext4_ext_rm_leaf work with EXT_DEBUG defined
The variable 'block' is removed by commit 750c9c47, so use the
replacement ex_ee_block instead.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-11-01 18:59:26 -04:00
Yongqiang Yang
32de675690 ext4: fix a syntax error in ext4_ext_insert_extent when debugging enabled
This patch fixes a syntax error which omits a comma. Besides this,
logical block number is unsigend 32 bits, so printk should use %u
instead %d.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-11-01 18:56:41 -04:00
Benny Halevy
fc0d14fe2d nfsd4: typo logical vs bitwise negate in nfsd4_decode_share_access
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-11-01 18:06:43 -04:00
Linus Torvalds
1c39865151 Merge branch 'pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
* 'pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore: make pstore write function return normal success/fail value
  pstore: change mutex locking to spin_locks
  pstore: defer inserting OOPS entries into pstore
2011-11-01 10:52:29 -07:00
Eric W. Biederman
f6d90b4f9c sysfs: Make sysfs_rename safe with sysfs_dirents in rbtrees.
In sysfs_rename we need to remove the optimization of not calling
sysfs_unlink_sibling and sysfs_link_sibling if the renamed parent
directory is not changing.  This optimization is no longer valid now
that sysfs dirents are stored in an rbtree sorted by name.

Move the assignment of s_ns before the call of sysfs_link_sibling.  With
no sysfs_dirent fields changing after the call of sysfs_link_sibling
this allows sysfs_link_sibling to take any of the directory entries into
account when it builds the rbtrees, and s_ns looks like a prime canidate
to be used in the rbtree in the future.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Greg KH <gregkh@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01 09:16:14 -07:00
Nelson Elhage
d8805e633e epoll: fix spurious lockdep warnings
epoll can acquire recursively acquire ep->mtx on multiple "struct
eventpoll"s at once in the case where one epoll fd is monitoring another
epoll fd.  This is perfectly OK, since we're careful about the lock
ordering, but it causes spurious lockdep warnings.  Annotate the recursion
using mutex_lock_nested, and add a comment explaining the nesting rules
for good measure.

Recent versions of systemd are triggering this, and it can also be
demonstrated with the following trivial test program:

--------------------8<--------------------

int main(void) {
   int e1, e2;
   struct epoll_event evt = {
       .events = EPOLLIN
   };

   e1 = epoll_create1(0);
   e2 = epoll_create1(0);
   epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt);
   return 0;
}
--------------------8<--------------------

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Nelson Elhage <nelhage@nelhage.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:57 -07:00
Andy Shevchenko
0a90e0f101 fat: follow rename pack_hex_byte() to hex_byte_pack()
There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:57 -07:00
Joe Perches
b9075fa968 treewide: use __printf not __attribute__((format(printf,...)))
Standardize the style for compiler based printf format verification.
Standardized the location of __printf too.

Done via script and a little typing.

$ grep -rPl --include=*.[ch] -w "__attribute__" * | \
  grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \
  xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }'

[akpm@linux-foundation.org: revert arch bits]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:54 -07:00
Pavel Emelyanov
d70ef97baf fs/pipe.c: add ->statfs callback for pipefs
Currently a statfs on a pipe's /proc/<pid>/fd/ link returns -ENOSYS.  Wire
pipfs up so that the statfs succeeds.

This is required by checkpoint-restart in the userspace to make it
possible to distinguish pipes from fifos.

When we dump information about task's open files we use the /proc/pid/fd
directoy's symlinks and the fact that opening any of them gives us exactly
the same dentry->inode pair as the original process has.  Now if a task
we're dumping has opened pipe and fifo we need to detect this and act
accordingly.  Knowing that an fd with type S_ISFIFO resides on a pipefs is
the most precise way.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:51 -07:00
Tao Ma
72a2ebd8bc fs/buffer.c: add device information for error output in __find_get_block_slow()
On the ext4 mailing list[1], we got some report about errors in
__find_get_block_slow(), but the information is very limited.

If the device information is given, we can know the name of the sick
volume.  Futhermore, we can get the corresponding status of that
block(group, inode block etc) by analyzing the disk layout.

[1] http://marc.info/?l=linux-ext4&m=131379831421147&w=2

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:49 -07:00
Mikulas Patocka
09f363c736 vmscan: fix shrinker callback bug in fs/super.c
The callback must not return -1 when nr_to_scan is zero. Fix the bug in
fs/super.c and add this requirement to the callback specification.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:49 -07:00
Akinobu Mita
798248206b lib/string.c: introduce memchr_inv()
memchr_inv() is mainly used to check whether the whole buffer is filled
with just a specified byte.

The function name and prototype are stolen from logfs and the
implementation is from SLUB.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Acked-by: Joern Engel <joern@logfs.org>
Cc: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:47 -07:00
Mel Gorman
966dbde2c2 ext4: warn if direct reclaim tries to writeback pages
Direct reclaim should never writeback pages.  Warn if an attempt is made.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:46 -07:00
Mel Gorman
94054fa3fc xfs: warn if direct reclaim tries to writeback pages
Direct reclaim should never writeback pages.  For now, handle the
situation and warn about it.  Ultimately, this will be a BUG_ON.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:46 -07:00
Christoph Lameter
bc3e53f682 mm: distinguish between mlocked and pinned pages
Some kernel components pin user space memory (infiniband and perf) (by
increasing the page count) and account that memory as "mlocked".

The difference between mlocking and pinning is:

A. mlocked pages are marked with PG_mlocked and are exempt from
   swapping. Page migration may move them around though.
   They are kept on a special LRU list.

B. Pinned pages cannot be moved because something needs to
   directly access physical memory. They may not be on any
   LRU list.

I recently saw an mlockalled process where mm->locked_vm became
bigger than the virtual size of the process (!) because some
memory was accounted for twice:

Once when the page was mlocked and once when the Infiniband
layer increased the refcount because it needt to pin the RDMA
memory.

This patch introduces a separate counter for pinned pages and
accounts them seperately.

Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: Mike Marciniszyn <infinipath@qlogic.com>
Cc: Roland Dreier <roland@kernel.org>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:46 -07:00
Robert P. J. Day
f5fc870da2 tmpfs: add "tmpfs" to the Kconfig prompt to make it obvious.
Add the leading word "tmpfs" to the Kconfig string to make it blindingly
obvious that this selection refers to tmpfs.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:45 -07:00
David Rientjes
c9f01245b6 oom: remove oom_disable_count
This removes mm->oom_disable_count entirely since it's unnecessary and
currently buggy.  The counter was intended to be per-process but it's
currently decremented in the exit path for each thread that exits, causing
it to underflow.

The count was originally intended to prevent oom killing threads that
share memory with threads that cannot be killed since it doesn't lead to
future memory freeing.  The counter could be fixed to represent all
threads sharing the same mm, but it's better to remove the count since:

 - it is possible that the OOM_DISABLE thread sharing memory with the
   victim is waiting on that thread to exit and will actually cause
   future memory freeing, and

 - there is no guarantee that a thread is disabled from oom killing just
   because another thread sharing its mm is oom disabled.

Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ying Han <yinghan@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:45 -07:00
Christopher Yeoh
fcf634098c Cross Memory Attach
The basic idea behind cross memory attach is to allow MPI programs doing
intra-node communication to do a single copy of the message rather than a
double copy of the message via shared memory.

The following patch attempts to achieve this by allowing a destination
process, given an address and size from a source process, to copy memory
directly from the source process into its own address space via a system
call.  There is also a symmetrical ability to copy from the current
process's address space into a destination process's address space.

- Use of /proc/pid/mem has been considered, but there are issues with
  using it:
  - Does not allow for specifying iovecs for both src and dest, assuming
    preadv or pwritev was implemented either the area read from or
  written to would need to be contiguous.
  - Currently mem_read allows only processes who are currently
  ptrace'ing the target and are still able to ptrace the target to read
  from the target. This check could possibly be moved to the open call,
  but its not clear exactly what race this restriction is stopping
  (reason  appears to have been lost)
  - Having to send the fd of /proc/self/mem via SCM_RIGHTS on unix
  domain socket is a bit ugly from a userspace point of view,
  especially when you may have hundreds if not (eventually) thousands
  of processes  that all need to do this with each other
  - Doesn't allow for some future use of the interface we would like to
  consider adding in the future (see below)
  - Interestingly reading from /proc/pid/mem currently actually
  involves two copies! (But this could be fixed pretty easily)

As mentioned previously use of vmsplice instead was considered, but has
problems.  Since you need the reader and writer working co-operatively if
the pipe is not drained then you block.  Which requires some wrapping to
do non blocking on the send side or polling on the receive.  In all to all
communication it requires ordering otherwise you can deadlock.  And in the
example of many MPI tasks writing to one MPI task vmsplice serialises the
copying.

There are some cases of MPI collectives where even a single copy interface
does not get us the performance gain we could.  For example in an
MPI_Reduce rather than copy the data from the source we would like to
instead use it directly in a mathops (say the reduce is doing a sum) as
this would save us doing a copy.  We don't need to keep a copy of the data
from the source.  I haven't implemented this, but I think this interface
could in the future do all this through the use of the flags - eg could
specify the math operation and type and the kernel rather than just
copying the data would apply the specified operation between the source
and destination and store it in the destination.

Although we don't have a "second user" of the interface (though I've had
some nibbles from people who may be interested in using it for intra
process messaging which is not MPI).  This interface is something which
hardware vendors are already doing for their custom drivers to implement
fast local communication.  And so in addition to this being useful for
OpenMPI it would mean the driver maintainers don't have to fix things up
when the mm changes.

There was some discussion about how much faster a true zero copy would
go. Here's a link back to the email with some testing I did on that:

http://marc.info/?l=linux-mm&m=130105930902915&w=2

There is a basic man page for the proposed interface here:

http://ozlabs.org/~cyeoh/cma/process_vm_readv.txt

This has been implemented for x86 and powerpc, other architecture should
mainly (I think) just need to add syscall numbers for the process_vm_readv
and process_vm_writev. There are 32 bit compatibility versions for
64-bit kernels.

For arch maintainers there are some simple tests to be able to quickly
verify that the syscalls are working correctly here:

http://ozlabs.org/~cyeoh/cma/cma-test-20110718.tgz

Signed-off-by: Chris Yeoh <yeohc@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: <linux-man@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:44 -07:00
Andrew Morton
fc360bd9cd /proc/self/numa_maps: restore "huge" tag for hugetlb vmas
The display of the "huge" tag was accidentally removed in 29ea2f698 ("mm:
use walk_page_range() instead of custom page table walking code").

Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Stephen Wilson <wilsons@start.ca>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:44 -07:00
Paul Gortmaker
143cb494cb fs: add module.h to files that were implicitly using it
Some files were using the complete module.h infrastructure without
actually including the header at all.  Fix them up in advance so
once the implicit presence is removed, we won't get failures like this:

  CC [M]  fs/nfsd/nfssvc.o
fs/nfsd/nfssvc.c: In function 'nfsd_create_serv':
fs/nfsd/nfssvc.c:335: error: 'THIS_MODULE' undeclared (first use in this function)
fs/nfsd/nfssvc.c:335: error: (Each undeclared identifier is reported only once
fs/nfsd/nfssvc.c:335: error: for each function it appears in.)
fs/nfsd/nfssvc.c: In function 'nfsd':
fs/nfsd/nfssvc.c:555: error: implicit declaration of function 'module_put_and_exit'
make[3]: *** [fs/nfsd/nfssvc.o] Error 1

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:31 -04:00
Paul Gortmaker
afeacc8c1f fs: add export.h to files using EXPORT_SYMBOL/THIS_MODULE macros
These files were getting <linux/module.h> via an implicit include
path, but we want to crush those out of existence since they cost
time during compiles of processing thousands of lines of headers
for no reason.  Give them the lightweight header that just contains
the EXPORT_SYMBOL infrastructure.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:31 -04:00
Robin Dong
ff3fc1736f ext4: fix a typo in struct ext4_allocation_context
This patch changes "bext" to "best".

Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-31 18:55:50 -04:00
Jan Kara
ed47a7d00c udf: Cleanup metadata flags handling
Use simple ->s_flags variable instead of u8 variable for each flag.

Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-31 23:49:48 +01:00
Namjae Jeon
3080a74ea3 udf: Skip mirror metadata FE loading when metadata FE is ok
It is not necessary to load mirror metadata FE when metadata FE is OK.  So try
to read it only the first time udf_get_pblock_meta25() fails to map the block
from metadata FE.

Signed-off-by: Ashish Sangwan <ashishsangwan2@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-31 23:49:30 +01:00
Dmitry Monakhov
6360e21f94 ext3: Allow quota file use root reservation
Quota file is fs's metadata, so it is reasonable  to permit use
root resevation if necessary. This patch fix 265'th xfstest failure

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-31 23:43:59 +01:00
Jan Kara
0aaa618863 quota: Drop path reference on error exit from quotactl
One error exit from quotactl forgot to do path_put(). Fix that.

Reported-by: Valerie Aurora <val@vaaconsulting.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-31 23:43:59 +01:00
Joe Perches
a983f368f8 udf: Neaten udf_debug uses
Just whitespace and argument alignment.
Introduce some checkpatch warnings that deserve to be ignored.

Reviewed-by: NamJae Jeon <linkinjeon@gmail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-31 23:43:58 +01:00
Joe Perches
c2bff36c29 udf: Neaten logging output, use vsprintf extension %pV
Use %pV and remove a static buffer to save some text space and fix possible
issues when several processes call error reporting function in parallel. Also
change error level from KERN_CRIT to KERN_ERR.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-31 23:43:58 +01:00
Joe Perches
78ace70c41 udf: Convert printks to pr_<level>
Use the current logging styles.

Convert a few printks that should have been udf_warn and udf_err.
Coalesce formats.  Add #define pr_fmt.
Move an #include "udfdecls.h" above other includes in udftime.c
so pr_fmt works correctly.  Strip prefixes from conversions as appropriate.
Reorder logging definitions in udfdecl.h

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-10-31 23:43:52 +01:00
Greg Harm
3c6fe77017 ext4: Don't normalize an falloc request if it can fit in 1 extent.
If an fallocate request fits in EXT_UNINIT_MAX_LEN, then set the
EXT4_GET_BLOCKS_NO_NORMALIZE flag. For larger fallocate requests,
let mballoc.c normalize the request.

This fixes a problem where large requests were being split into
non-contiguous extents due to commit 556b27abf7: ext4: do not
normalize block requests from fallocate.

Testing: 
*) Checked that 8.x MB falloc'ed files are still laid down next to
each other (contiguously).
*) Checked that the maximum size extent (127.9MB) is allocated as 1
extent.
*) Checked that a 1GB file is somewhat contiguous (often 5-6
non-contiguous extents now).
*) Checked that a 120MB file can still be falloc'ed even if there are
no single extents large enough to hold it.

Signed-off-by: Greg Harm <gharm@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-31 18:41:47 -04:00
Eryu Guan
4af8350899 ext4: remove comments about extent mount option in ext4_new_inode()
Remove comments about 'extent' mount option in ext4_new_inode(), since
it's no longer exists.

Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-31 18:21:29 -04:00
Yongqiang Yang
edb5ac8993 ext4: let ext4_discard_partial_buffers handle unaligned range correctly
As comment says, we should handle unaligned range rather than aligned
one.  This fixes a bug found by running xfstests #91.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
2011-10-31 18:04:38 -04:00
Yongqiang Yang
5129d05fda ext4: return ENOMEM if find_or_create_pages fails
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-31 17:56:10 -04:00
Yongqiang Yang
e260daf279 ext4: move vars to local scope in ext4_discard_partial_page_buffers_no_lock()
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-31 17:54:36 -04:00
Tao Ma
0edeb71dc9 ext4: Create helper function for EXT4_IO_END_UNWRITTEN and i_aiodio_unwritten
EXT4_IO_END_UNWRITTEN flag set and the increase of i_aiodio_unwritten
should be done simultaneously since ext4_end_io_nolock always clear
the flag and decrease the counter in the same time.

We have found some bugs that the flag is set while leaving
i_aiodio_unwritten unchanged(commit 32c80b32c0). So this patch just tries
to create a helper function to wrap them to avoid any future bug.
The idea is inspired by Eric.

Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-31 17:30:44 -04:00
Chuck Lever
e414966b81 NFS: Remove no-op less-than-zero checks on unsigned variables.
Introduced by commit 16b374ca "NFSv4.1: pnfs: filelayout: add driver's
LAYOUTGET and GETDEVICEINFO infrastructure" (October 20, 2010).

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-31 11:52:47 -04:00
Chuck Lever
c6e6966602 NFS: Clean up nfs4_xdr_dec_secinfo()
Clean up: Remove superfluous logic at the tail of
nfs4_xdr_dec_secinfo() .

Introduced by commit 5a5ea0d4 "NFS: Add secinfo procedure" (March 24,
2011).

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-31 11:52:47 -04:00
Chuck Lever
c02f557dd0 NFS: Fix documenting comment for nfs_create_request()
Clean up: the first parameter of nfs_create_request() has been
incorrectly documented since time immemorial (OK, since before
2.6.12).

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-31 11:52:47 -04:00
Peng Tao
d743c3c9c2 NFS4: fix cb_recallany decode error
craa_type_mask is bitmap4 per RFC5661. We need to expect a length before
extracting bitmap value.

Cc: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-31 11:51:28 -04:00
Peng Tao
92407e75ce nfs4: serialize layoutcommit
Current pnfs_layoutcommit_inode can not handle parallel layoutcommit.
And as Trond suggested , there is no need for client to optimize for
parallel layoutcommit. So add NFS_INO_LAYOUTCOMMITTING flag to
mark inflight layoutcommit and serialize lalyoutcommit with it.
Also mark_inode_dirty_sync if pnfs_layoutcommit_inode fails to issue
layoutcommit.

Reported-by: Vitaliy Gusev <gusev.vitaliy@nexenta.com>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-31 11:51:28 -04:00
Theodore Ts'o
b82e384c7b ext4: optimize locking for end_io extent conversion
Now that we are doing the locking correctly, we need to grab the
i_completed_io_lock() twice per end_io.  We can clean this up by
removing the structure from the i_complted_io_list, and use this as
the locking mechanism to prevent ext4_flush_completed_IO() racing
against ext4_end_io_work(), instead of clearing the
EXT4_IO_END_UNWRITTEN in io->flag.

In addition, if the ext4_convert_unwritten_extents() returns an error,
we no longer keep the end_io structure on the linked list.  This
doesn't help, because it tends to lock up the file system and wedges
the system.  That's one way to call attention to the problem, but it
doesn't help the overall robustness of the system.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-31 10:56:32 -04:00
Theodore Ts'o
4e29802121 ext4: remove unnecessary call to waitqueue_active()
The usage of waitqueue_active() is not necessary, and introduces (I
believe) a hard-to-hit race.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-30 18:41:19 -04:00
Tao Ma
d73d5046a7 ext4: Use correct locking for ext4_end_io_nolock()
We must hold i_completed_io_lock when manipulating anything on the
i_completed_io_list linked list.  This includes io->lock, which we
were checking in ext4_end_io_nolock().

So move this check to ext4_end_io_work().  This also has the bonus of
avoiding extra work if it is already done without needing to take the
mutex.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-30 18:26:08 -04:00
Curt Wohlgemuth
0e175a1835 writeback: Add a 'reason' to wb_writeback_work
This creates a new 'reason' field in a wb_writeback_work
structure, which unambiguously identifies who initiates
writeback activity.  A 'wb_reason' enumeration has been
added to writeback.h, to enumerate the possible reasons.

The 'writeback_work_class' and tracepoint event class and
'writeback_queue_io' tracepoints are updated to include the
symbolic 'reason' in all trace events.

And the 'writeback_inodes_sbXXX' family of routines has had
a wb_stats parameter added to them, so callers can specify
why writeback is being started.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-10-31 00:33:36 +08:00
Curt Wohlgemuth
ad4e38dd6a writeback: send work item to queue_io, move_expired_inodes
Instead of sending ->older_than_this to queue_io() and
move_expired_inodes(), send the entire wb_writeback_work
structure.  There are other fields of a work item that are
useful in these routines and in tracepoints.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-10-31 00:33:27 +08:00
Shirish Pargaonkar
9ef5992e44 cifs: Assume passwords are encoded according to iocharset (try #2)
Re-posting a patch originally posted by Oskar Liljeblad after
rebasing on 3.2.

Modify cifs to assume that the supplied password is encoded according
to iocharset.  Before this patch passwords would be treated as
raw 8-bit data, which made authentication with Unicode passwords impossible
(at least passwords with characters > 0xFF).

The previous code would as a side effect accept passwords encoded with
ISO 8859-1, since Unicode < 0x100 basically is ISO 8859-1.  Software which
relies on that will no longer support password chars > 0x7F unless it also
uses iocharset=iso8859-1.  (mount.cifs does not care about the encoding so
it will work as expected.)

Signed-off-by: Oskar Liljeblad <oskar@osk.mine.nu>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Tested-by: A <nimbus1_03087@yahoo.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-29 22:06:54 -05:00
Pavel Shilovsky
5079276066 CIFS: Fix the VFS brlock cache usage in posix locking case
Request to the cache in FL_POSIX case only.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-29 22:03:14 -05:00
Eric Sandeen
6d6a435190 ext4: fix race in xattr block allocation path
Ceph users reported that when using Ceph on ext4, the filesystem
would often become corrupted, containing inodes with incorrect
i_blocks counters.

I managed to reproduce this with a very hacked-up "streamtest"
binary from the Ceph tree.

Ceph is doing a lot of xattr writes, to out-of-inode blocks.
There is also another thread which does sync_file_range and close,
of the same files.  The problem appears to happen due to this race:

sync/flush thread               xattr-set thread
-----------------               ----------------

do_writepages                   ext4_xattr_set
ext4_da_writepages              ext4_xattr_set_handle
mpage_da_map_blocks             ext4_xattr_block_set
        set DELALLOC_RESERVE
                                ext4_new_meta_blocks
                                        ext4_mb_new_blocks
                                                if (!i_delalloc_reserved_flag)
                                                        vfs_dq_alloc_block
ext4_get_blocks
	down_write(i_data_sem)
        set i_delalloc_reserved_flag
	...
	up_write(i_data_sem)
                                        if (i_delalloc_reserved_flag)
                                                vfs_dq_alloc_block_nofail


In other words, the sync/flush thread pops in and sets
i_delalloc_reserved_flag on the inode, which makes the xattr thread
think that it's in a delalloc path in ext4_new_meta_blocks(),
and add the block for a second time, after already having added
it once in the !i_delalloc_reserved_flag case in ext4_mb_new_blocks

The real problem is that we shouldn't be using the DELALLOC_RESERVED
state flag, and instead we should be passing
EXT4_GET_BLOCKS_DELALLOC_RESERVE down to ext4_map_blocks() instead of
using an inode state flag.  We'll fix this for now with using
i_data_sem to prevent this race, but this is really not the right way
to fix things.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2011-10-29 10:15:35 -04:00
Yongqiang Yang
e7b319e397 ext4: trace punch_hole correctly in ext4_ext_map_blocks
When ext4_ext_map_blocks() is called by punch_hole, trace should
trace blocks punched out.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-29 09:39:51 -04:00
Yongqiang Yang
02dc62fba8 ext4: clean up AGGRESSIVE_TEST code
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-29 09:29:11 -04:00
Yongqiang Yang
81fdbb4a8d ext4: move variables to their scope
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-29 09:23:38 -04:00
Dmitry Monakhov
5cb81dabcc ext4: fix quota accounting during migration
The tmp_inode should have same uid/gid as the original inode.
Otherwise new metadata blocks will be accounted to wrong quota-id,
which will result in a quota leak after the inode migration is
completed.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-29 09:05:00 -04:00
Dmitry Monakhov
fba90ffee8 ext4: migrate cleanup
This patch cleanup code a bit, actual logic not changed
- Move current block pointer to migrate_structure, let's all
  walk info will be in one structure.
- Get rid of usless null ind-block ptr checks, caller already
  does that check.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-29 09:03:00 -04:00
Linus Torvalds
97d2eb13a0 Merge branch 'for-linus' of git://ceph.newdream.net/git/ceph-client
* 'for-linus' of git://ceph.newdream.net/git/ceph-client:
  libceph: fix double-free of page vector
  ceph: fix 32-bit ino numbers
  libceph: force resend of osd requests if we skip an osdmap
  ceph: use kernel DNS resolver
  ceph: fix ceph_monc_init memory leak
  ceph: let the set_layout ioctl set single traits
  Revert "ceph: don't truncate dirty pages in invalidate work thread"
  ceph: replace leading spaces with tabs
  libceph: warn on msg allocation failures
  libceph: don't complain on msgpool alloc failures
  libceph: always preallocate mon connection
  libceph: create messenger with client
  ceph: document ioctls
  ceph: implement (optional) max read size
  ceph: rename rsize -> rasize
  ceph: make readpages fully async
2011-10-28 16:42:18 -07:00
Steve French
8ea00c6977 [CIFS] Update cifs version to 1.76
Update cifs version to 1.76 now that async read,
lock caching, and changes to oplock enabled interface
are in.

Thanks to Pavel for reminding me.

Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-28 14:49:46 -05:00
Pavel Shilovsky
d12799b4c3 CIFS: Remove extra mutex_unlock in cifs_lock_add_if
to prevent the mutex being unlocked twice if we interrupt a blocked lock.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-28 14:09:23 -05:00
Linus Torvalds
f362f98e7c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue: (21 commits)
  leases: fix write-open/read-lease race
  nfs: drop unnecessary locking in llseek
  ext4: replace cut'n'pasted llseek code with generic_file_llseek_size
  vfs: add generic_file_llseek_size
  vfs: do (nearly) lockless generic_file_llseek
  direct-io: merge direct_io_walker into __blockdev_direct_IO
  direct-io: inline the complete submission path
  direct-io: separate map_bh from dio
  direct-io: use a slab cache for struct dio
  direct-io: rearrange fields in dio/dio_submit to avoid holes
  direct-io: fix a wrong comment
  direct-io: separate fields only used in the submission path from struct dio
  vfs: fix spinning prevention in prune_icache_sb
  vfs: add a comment to inode_permission()
  vfs: pass all mask flags check_acl and posix_acl_permission
  vfs: add hex format for MAY_* flag values
  vfs: indicate that the permission functions take all the MAY_* flags
  compat: sync compat_stats with statfs.
  vfs: add "device" tag to /proc/self/mountstats
  cleanup: vfs: small comment fix for block_invalidatepage
  ...

Fix up trivial conflict in fs/gfs2/file.c (llseek changes)
2011-10-28 10:49:34 -07:00
Linus Torvalds
f793f29611 Merge http://sucs.org/~rohan/git/gfs2-3.0-nmw
* http://sucs.org/~rohan/git/gfs2-3.0-nmw: (24 commits)
  GFS2: Move readahead of metadata during deallocation into its own function
  GFS2: Remove two unused variables
  GFS2: Misc fixes
  GFS2: rewrite fallocate code to write blocks directly
  GFS2: speed up delete/unlink performance for large files
  GFS2: Fix off-by-one in gfs2_blk2rgrpd
  GFS2: Clean up ->page_mkwrite
  GFS2: Correctly set goal block after allocation
  GFS2: Fix AIL flush issue during fsync
  GFS2: Use cached rgrp in gfs2_rlist_add()
  GFS2: Call do_strip() directly from recursive_scan()
  GFS2: Remove obsolete assert
  GFS2: Cache the most recently used resource group in the inode
  GFS2: Make resource groups "append only" during life of fs
  GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme
  GFS2: Fix lseek after SEEK_DATA, SEEK_HOLE have been added
  GFS2: Clean up gfs2_create
  GFS2: Use ->dirty_inode()
  GFS2: Fix bug trap and journaled data fsync
  GFS2: Fix inode allocation error path
  ...
2011-10-28 10:44:50 -07:00
Linus Torvalds
dabcbb1bae Merge branch '3.2-without-smb2' of git://git.samba.org/sfrench/cifs-2.6
* '3.2-without-smb2' of git://git.samba.org/sfrench/cifs-2.6: (52 commits)
  Fix build break when freezer not configured
  Add definition for share encryption
  CIFS: Make cifs_push_locks send as many locks at once as possible
  CIFS: Send as many mandatory unlock ranges at once as possible
  CIFS: Implement caching mechanism for posix brlocks
  CIFS: Implement caching mechanism for mandatory brlocks
  CIFS: Fix DFS handling in cifs_get_file_info
  CIFS: Fix error handling in cifs_readv_complete
  [CIFS] Fixup trivial checkpatch warning
  [CIFS] Show nostrictsync and noperm mount options in /proc/mounts
  cifs, freezer: add wait_event_freezekillable and have cifs use it
  cifs: allow cifs_max_pending to be readable under /sys/module/cifs/parameters
  cifs: tune bdi.ra_pages in accordance with the rsize
  cifs: allow for larger rsize= options and change defaults
  cifs: convert cifs_readpages to use async reads
  cifs: add cifs_async_readv
  cifs: fix protocol definition for READ_RSP
  cifs: add a callback function to receive the rest of the frame
  cifs: break out 3rd receive phase into separate function
  cifs: find mid earlier in receive codepath
  ...
2011-10-28 10:43:32 -07:00
Linus Torvalds
5619a69396 Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (69 commits)
  xfs: add AIL pushing tracepoints
  xfs: put in missed fix for merge problem
  xfs: do not flush data workqueues in xfs_flush_buftarg
  xfs: remove XFS_bflush
  xfs: remove xfs_buf_target_name
  xfs: use xfs_ioerror_alert in xfs_buf_iodone_callbacks
  xfs: clean up xfs_ioerror_alert
  xfs: clean up buffer allocation
  xfs: remove buffers from the delwri list in xfs_buf_stale
  xfs: remove XFS_BUF_STALE and XFS_BUF_SUPER_STALE
  xfs: remove XFS_BUF_SET_VTYPE and XFS_BUF_SET_VTYPE_REF
  xfs: remove XFS_BUF_FINISH_IOWAIT
  xfs: remove xfs_get_buftarg_list
  xfs: fix buffer flushing during unmount
  xfs: optimize fsync on directories
  xfs: reduce the number of log forces from tail pushing
  xfs: Don't allocate new buffers on every call to _xfs_buf_find
  xfs: simplify xfs_trans_ijoin* again
  xfs: unlock the inode before log force in xfs_change_file_space
  xfs: unlock the inode before log force in xfs_fs_nfs_commit_metadata
  ...
2011-10-28 10:31:42 -07:00
J. Bruce Fields
f3c7691e8d leases: fix write-open/read-lease race
In setlease, we use i_writecount to decide whether we can give out a
read lease.

In open, we break leases before incrementing i_writecount.

There is therefore a window between the break lease and the i_writecount
increment when setlease could add a new read lease.

This would leave us with a simultaneous write open and read lease, which
shouldn't happen.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:59:00 +02:00
Andi Kleen
79835a710d nfs: drop unnecessary locking in llseek
This makes NFS follow the standard generic_file_llseek locking scheme.

Cc: Trond.Myklebust@netapp.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:59:00 +02:00
Andi Kleen
4cce0e28b9 ext4: replace cut'n'pasted llseek code with generic_file_llseek_size
This gives ext4 the benefits of unlocked llseek.

Cc: tytso@mit.edu
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:59 +02:00
Andi Kleen
5760495a87 vfs: add generic_file_llseek_size
Add a generic_file_llseek variant to the VFS that allows passing in
the maximum file size of the file system, instead of always
using maxbytes from the superblock.

This can be used to eliminate some cut'n'paste seek code in ext4.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:59 +02:00
Andi Kleen
ef3d0fd27e vfs: do (nearly) lockless generic_file_llseek
The i_mutex lock use of generic _file_llseek hurts.  Independent processes
accessing the same file synchronize over a single lock, even though
they have no need for synchronization at all.

Under high utilization this can cause llseek to scale very poorly on larger
systems.

This patch does some rethinking of the llseek locking model:

First the 64bit f_pos is not necessarily atomic without locks
on 32bit systems. This can already cause races with read() today.
This was discussed on linux-kernel in the past and deemed acceptable.
The patch does not change that.

Let's look at the different seek variants:

SEEK_SET: Doesn't really need any locking.
If there's a race one writer wins, the other loses.

For 32bit the non atomic update races against read()
stay the same. Without a lock they can also happen
against write() now.  The read() race was deemed
acceptable in past discussions, and I think if it's
ok for read it's ok for write too.

=> Don't need a lock.

SEEK_END: This behaves like SEEK_SET plus it reads
the maximum size too. Reading the maximum size would have the
32bit atomic problem. But luckily we already have a way to read
the maximum size without locking (i_size_read), so we
can just use that instead.

Without i_mutex there is no synchronization with write() anymore,
however since the write() update is atomic on 64bit it just behaves
like another racy SEEK_SET.  On non atomic 32bit it's the same
as SEEK_SET.

=> Don't need a lock, but need to use i_size_read()

SEEK_CUR: This has a read-modify-write race window
on the same file. One could argue that any application
doing unsynchronized seeks on the same file is already broken.
But for the sake of not adding a regression here I'm
using the file->f_lock to synchronize this. Using this
lock is much better than the inode mutex because it doesn't
synchronize between processes.

=> So still need a lock, but can use a f_lock.

This patch implements this new scheme in generic_file_llseek.
I dropped generic_file_llseek_unlocked and changed all callers.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:58 +02:00
Andi Kleen
847cc6371b direct-io: merge direct_io_walker into __blockdev_direct_IO
This doesn't change anything for the compiler, but hch thought it would
make the code clearer.

I moved the reference counting into its own little inline.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:58 +02:00
Andi Kleen
ba253fbf6d direct-io: inline the complete submission path
Add inlines to all the submission path functions. While this increases
code size it also gives gcc a lot of optimization opportunities
in this critical hotpath.

In particular -- together with some other changes -- this
allows gcc to get rid of the unnecessary clearing of
sdio at the beginning and optimize the messy parameter passing.
Any non inlining of a function which takes a sdio parameter
would break this optimization because they cannot be done if the
address of a structure is taken.

Note that benefits are only seen with CONFIG_OPTIMIZE_INLINING
and CONFIG_CC_OPTIMIZE_FOR_SIZE both set to off.

This gives about 2.2% improvement on a large database benchmark
with a high IOPS rate.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:58 +02:00
Andi Kleen
18772641db direct-io: separate map_bh from dio
Only a single b_private field in the map_bh buffer head is needed after
the submission path. Move map_bh separately to avoid storing
this information in the long term slab.

This avoids the weird 104 byte hole in struct dio_submit which also needed
to be memseted early.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:57 +02:00
Andi Kleen
6e8267f532 direct-io: use a slab cache for struct dio
A direct slab call is slightly faster than kmalloc and can be better cached
per CPU. It also avoids rounding to the next kmalloc slab.

In addition this enforces cache line alignment for struct dio to avoid
any false sharing.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:57 +02:00
Andi Kleen
0dc2bc49be direct-io: rearrange fields in dio/dio_submit to avoid holes
Fix most problems reported by pahole.

There is still a weird 104 byte hole after map_bh. I'm not sure what
causes this.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:56 +02:00
Andi Kleen
cde1ecb324 direct-io: fix a wrong comment
There's nothing on the stack, even before my changes.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:56 +02:00
Andi Kleen
eb28be2b4c direct-io: separate fields only used in the submission path from struct dio
This large, but largely mechanic, patch moves all fields in struct dio
that are only used in the submission path into a separate on stack
data structure. This has the advantage that the memory is very likely
cache hot, which is not guaranteed for memory fresh out of kmalloc.

This also gives gcc more optimization potential because it can easier
determine that there are no external aliases for these variables.

The sdio initialization is a initialization now instead of memset.
This allows gcc to break sdio into individual fields and optimize
away unnecessary zeroing (after all the functions are inlined)

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:56 +02:00
Christoph Hellwig
62a3ddef61 vfs: fix spinning prevention in prune_icache_sb
We need to move the inode to the end of the list to actually make the
spinning prevention explained in the comment above it work.  With a
plain list_move it will simply stay in place as we're always reclaiming
from the head of the list.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:55 +02:00
Andreas Gruenbacher
948409c74d vfs: add a comment to inode_permission()
Acked-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruen@kernel.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:55 +02:00
Andreas Gruenbacher
d124b60a83 vfs: pass all mask flags check_acl and posix_acl_permission
Acked-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruen@kernel.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:54 +02:00
Andreas Gruenbacher
8fd90c8d1d vfs: indicate that the permission functions take all the MAY_* flags
Acked-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruen@kernel.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:54 +02:00
Eric W. Biederman
1448c721e4 compat: sync compat_stats with statfs.
This was found by inspection while tracking a similar
bug in compat_statfs64, that has been fixed in mainline
since decemeber.

- This fixes a bug where not all of the f_spare fields
  were cleared on mips and s390.
- Add the f_flags field to struct compat_statfs
- Copy f_flags to userspace in case someone cares.
- Use __clear_user to copy the f_spare field to userspace
  to ensure that all of the elements of f_spare are cleared.
  On some architectures f_spare is has 5 ints and on some
  architectures f_spare only has 4 ints.  Which makes
  the previous technique of clearing each int individually
  broken.

I don't expect anyone actually uses the old statfs system
call anymore but if they do let them benefit from having
the compat and the native version working the same.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:53 +02:00
Bryan Schumaker
a877ee03ac vfs: add "device" tag to /proc/self/mountstats
nfsiostat was failing to find mounted filesystems on kernels after
2.6.38 because of changes to show_vfsstat() by commit
c7f404b40a.  This patch adds back the
"device" tag before the nfs server entry so scripts can parse the
mountstats file correctly.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
CC: stable@kernel.org [>=2.6.39]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 13:55:08 +02:00
Wang Sheng-Hui
814e1d25a5 cleanup: vfs: small comment fix for block_invalidatepage
The patch is aganist 3.1-rc3.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 13:55:08 +02:00
Steve French
96814ecb40 Add definition for share encryption
Samba supports a setfs info level to negotiate encrypted
shares.  This patch adds the defines so we recognize
this info level.  Later patches will add the enablement
for it.

Acked-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-27 16:53:31 -05:00
Eric Gouriou
80e675f906 ext4: optimize memmmove lengths in extent/index insertions
ext4_ext_insert_extent() (respectively ext4_ext_insert_index())
was using EXT_MAX_EXTENT() (resp. EXT_MAX_INDEX()) to determine
how many entries needed to be moved beyond the insertion point.
In practice this means that (320 - I) * 24 bytes were memmove()'d
when I is the insertion point, rather than (#entries - I) * 24 bytes.

This patch uses EXT_LAST_EXTENT() (resp. EXT_LAST_INDEX()) instead
to only move existing entries. The code flow is also simplified
slightly to highlight similarities and reduce code duplication in
the insertion logic.

This patch reduces system CPU consumption by over 25% on a 4kB
synchronous append DIO write workload when used with the
pre-2.6.39 x86_64 memmove() implementation. With the much faster
2.6.39 memmove() implementation we still see a decrease in
system CPU usage between 2% and 7%.

Note that the ext_debug() output changes with this patch, splitting
some log information between entries. Users of the ext_debug() output
should note that the "move %d" units changed from reporting the number
of bytes moved to reporting the number of entries moved.

Signed-off-by: Eric Gouriou <egouriou@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-27 11:52:18 -04:00
Eric Gouriou
6f91bc5fda ext4: optimize ext4_ext_convert_to_initialized()
This patch introduces a fast path in ext4_ext_convert_to_initialized()
for the case when the conversion can be performed by transferring
the newly initialized blocks from the uninitialized extent into
an adjacent initialized extent. Doing so removes the expensive
invocations of memmove() which occur during extent insertion and
the subsequent merge.

In practice this should be the common case for clients performing
append writes into files pre-allocated via
fallocate(FALLOC_FL_KEEP_SIZE). In such a workload performed via
direct IO and when using a suboptimal implementation of memmove()
(x86_64 prior to the 2.6.39 rewrite), this patch reduces kernel CPU
consumption by 32%.

Two new trace points are added to ext4_ext_convert_to_initialized()
to offer visibility into its operations. No exit trace point has
been added due to the multiplicity of return points. This can be
revisited once the upstream cleanup is backported.

Signed-off-by: Eric Gouriou <egouriou@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-27 11:43:23 -04:00
Randy Dunlap
4470575461 jbd2: fix build when CONFIG_BUG is not enabled
Fix build error when CONFIG_BUG is not enabled:

fs/jbd2/transaction.c:1175:3: error: implicit declaration of function '__WARN'

by changing __WARN() to WARN_ON(), as suggested by
Arnaud Lacombe <lacombar@gmail.com>.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Arnaud Lacombe <lacombar@gmail.com>
2011-10-27 04:05:13 -04:00
Boaz Harrosh
60325f0c6e fs/Makefile: Stupid typo breakage of exofs inclusion
In my last patch I did a stupid mistake and broke the exofs
compilation completely. Fix it ASAP.

Instead of obj-y I did obj-$(y)

Really Really sorry. Me totally blushing :-{|

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-27 08:36:51 +02:00
Linus Torvalds
c28cfd60e4 Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
* 'for-linus' of git://git.open-osd.org/linux-open-osd: (21 commits)
  ore: Enable RAID5 mounts
  exofs: Support for RAID5 read-4-write interface.
  ore: RAID5 Write
  ore: RAID5 read
  fs/Makefile: Always inspect exofs/
  ore: Make ore_calc_stripe_info EXPORT_SYMBOL
  ore/exofs: Change ore_check_io API
  ore/exofs: Define new ore_verify_layout
  ore: Support for partial component table
  ore: Support for short read/writes
  exofs: Support for short read/writes
  ore: Remove check for ios->kern_buff in _prepare_for_striping to later
  ore: cleanup: Embed an ore_striping_info inside ore_io_state
  ore: Only IO one group at a time (API change)
  ore/exofs: Change the type of the devices array (API change)
  ore: Make ore_striping_info and ore_calc_stripe_info public
  exofs: Remove unused data_map member from exofs_sb_info
  exofs: Rename struct ore_components comps => oc
  exofs/super.c: local functions should be static
  exofs/ore.c: local functions should be static
  ...
2011-10-26 21:33:50 +02:00
Linus Torvalds
39adff5f69 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  time, s390: Get rid of compile warning
  dw_apb_timer: constify clocksource name
  time: Cleanup old CONFIG_GENERIC_TIME references that snuck in
  time: Change jiffies_to_clock_t() argument type to unsigned long
  alarmtimers: Fix error handling
  clocksource: Make watchdog reset lockless
  posix-cpu-timers: Cure SMP accounting oddities
  s390: Use direct ktime path for s390 clockevent device
  clockevents: Add direct ktime programming function
  clockevents: Make minimum delay adjustments configurable
  nohz: Remove "Switched to NOHz mode" debugging messages
  proc: Consider NO_HZ when printing idle and iowait times
  nohz: Make idle/iowait counter update conditional
  nohz: Fix update_ts_time_stat idle accounting
  cputime: Clean up cputime_to_usecs and usecs_to_cputime macros
  alarmtimers: Rework RTC device selection using class interface
  alarmtimers: Add try_to_cancel functionality
  alarmtimers: Add more refined alarm state tracking
  alarmtimers: Remove period from alarm structure
  alarmtimers: Remove interval cap limit hack
  ...
2011-10-26 17:15:03 +02:00
Tao Ma
b3ff056908 ext4: don't check io->flag when setting EXT4_STATE_DIO_UNWRITTEN inode state
When we want to convert the unitialized extent in direct write, we can
either do it in ext4_end_io_nolock(AIO case) or in
ext4_ext_direct_IO(non AIO case) and EXT4_I(inode)->cur_aio_dio is a
guard for ext4_ext_map_blocks to find the right case.  In e9e3bcecf,
we mistakenly change it by:

-			if (io)
+			if (io && !(io->flag & EXT4_IO_END_UNWRITTEN)) {
 				io->flag = EXT4_IO_END_UNWRITTEN;
-			else
+				atomic_inc(&EXT4_I(inode)->i_aiodio_unwritten);
+			} else
 				ext4_set_inode_state(inode,
 						     EXT4_STATE_DIO_UNWRITTEN);

So now if we map 2 blocks, and the first one set the
EXT_IO_END_UNWRITTEN, the 2nd mapping will set inode state because of
the check for the flag. This is wrong.

Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-26 11:08:39 -04:00
Robin Dong
0a10da73e1 ext4: fix a wrong comment in __mb_check_buddy()
The comment says the bit should be 0, but the after code assert the
bit to be 1.  This makes people confused, so fix it.

Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-26 08:48:54 -04:00
Linus Torvalds
e33bae14fd Merge branch 'for-linus' of git://github.com/ericvh/linux
* 'for-linus' of git://github.com/ericvh/linux:
  9p: fix 9p.txt to advertise msize instead of maxdata
  net/9p: Convert net/9p protocol dumps to tracepoints
  fs/9p: change an int to unsigned int
  fs/9p: Cleanup option parsing in 9p
  9p: move dereference after NULL check
  fs/9p: inode file operation is properly initialized init_special_inode
  fs/9p: Update zero-copy implementation in 9p
2011-10-26 14:20:53 +02:00
Robin Dong
b051d8dc4e ext4: remove unused variable in mb_find_extent()
The variable 'ord' in function mb_find_extent() is redundant, so
remove it.

Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-26 05:30:30 -04:00
Robin Dong
66a83cde47 ext4: remove unused variable in ext4_mb_generate_from_pa()
The variable 'count' in function ext4_mb_generate_from_pa() looks
useless, so remove it.

Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-26 05:29:21 -04:00
Robin Dong
ebbe027797 ext4: use stream-alloc when mb_group_prealloc set to zero
The kernel will crash on 

ext4_mb_mark_diskspace_used:
	BUG_ON(ac->ac_b_ex.fe_len <= 0);

after we set /sys/fs/ext4/sda/mb_group_prealloc to zero and create new files in an ext4 filesystem.

The reason is: ac_b_ex.fe_len also set to zero(mb_group_prealloc) in ext4_mb_normalize_group_request
because the ac_flags contains EXT4_MB_HINT_GROUP_ALLOC.

I think when someone set mb_group_prealloc to zero, it means DO NOT USE GROUP PREALLOCATION,
so we should set alloc-strategy to STREAM in this case.

Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-26 05:14:27 -04:00
Yongqiang Yang
fcbb551582 ext4: let ext4_page_mkwrite stop started handle in failure
The started journal handle should be stopped in failure case.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
2011-10-26 05:00:19 -04:00
Curt Wohlgemuth
6f8ff53726 ext4: handle NULL p_ext in ext4_ext_next_allocated_block()
In ext4_ext_next_allocated_block(), the path[depth] might
have a p_ext that is NULL -- see ext4_ext_binsearch().  In
such a case, dereferencing it will crash the machine.

This patch checks for p_ext == NULL in
ext4_ext_next_allocated_block() before dereferencinging it.

Tested using a hand-crafted an inode with eh_entries == 0 in
an extent block, verified that running FIEMAP on it crashes
without this patch, works fine with it.

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-26 04:38:59 -04:00
Dan Carpenter
f85b287a01 ext4: error handling fix in ext4_ext_convert_to_initialized()
When allocated is unsigned it breaks the error handling at the end
of the function when we call:
	allocated = ext4_split_extent(...);
	if (allocated < 0)
		err = allocated;

I've made it a signed int instead of unsigned.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-26 03:42:36 -04:00
Eric Sandeen
665436175c ext4: use ext4_reserve_inode_write in ext4_xattr_set_handle
ext4_mark_iloc_dirty() says:

 * The caller must have previously called ext4_reserve_inode_write().
 * Give this, we know that the caller already has write access to iloc->bh.

ext4_xattr_set_handle, however, just open-codes it.  May as well use
the helper function for consistency.

No bug here, just tidiness.

(Note: on cleanup path, ext4_reserve_inode_write sets
the bh to NULL if it returns an error, and brelse() of 
a null bh is handled gracefully).

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-26 03:32:07 -04:00
Andreas Dilger
909a4cf1ff ext4: avoid setting directory i_nlink to zero
If a directory with more than EXT4_LINK_MAX subdirectories, the nlink
count is set to 1.  Subsequently, if any subdirectories are deleted,
ext4_dec_count() decrements the i_nlink count, which may go to 0
temporarily before being incremented back to 1.

While this is done under i_mutex, which prevents races for directory
and inode operations that check i_nlink, the temporary i_nlink == 0
case is exposed to userspace via stat() and similar calls that do not
hold i_mutex.

Instead, change the code to not decrement i_nlink count for any
directories that do not already have i_nlink larger than 2.

Reported-by: Cliff White <cliffw@whamcloud.com>
Reviewed-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-26 03:22:31 -04:00
Sage Weil
3395734067 libceph: fix double-free of page vector
ceph_release_page_vector() kfrees the vector; we shouldn't do it here too.

Reported-by: Jeff Wu <cpwu@tnsoft.com.cn>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-10-25 16:10:17 -07:00
Amon Ott
3310f7541f ceph: fix 32-bit ino numbers
Fix 32-bit ino generation to not always be 1.

Signed-off-by: Amon Ott <a.ott@m-privacy.de>
2011-10-25 16:10:17 -07:00
Greg Farnum
a35eca958a ceph: let the set_layout ioctl set single traits
Previously we were validating the passed-in stripe unit, object size,
and stripe count against each other (and not testing most other stuff).
Instead, make sure that the composed previous layout and new values are valid,
and only send the new values to the MDS. This lets users change the
pool without setting the whole layout, for instance.

Signed-off-by: Greg Farnum <gregory.farnum@dreamhost.com>
2011-10-25 16:10:16 -07:00
Sage Weil
83eaea22bd Revert "ceph: don't truncate dirty pages in invalidate work thread"
This reverts commit c9af9fb68e.

We need to block and truncate all pages in order to reliably invalidate
them.  Otherwise, we could:

 - have some uptodate pages in the cache
 - queue an invalidate
 - write(2) locks some pages
 - invalidate_work skips them
 - write(2) only overwrites part of the page
 - page now dirty and uptodate
 -> partial leakage of invalidated data

It's not entirely clear why we started skipping locked pages in the first
place.  I just ran this through fsx and didn't see any problems.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-10-25 16:10:16 -07:00
Noah Watkins
80db8bea6a ceph: replace leading spaces with tabs
Trivial formatting fix.

Signed-off-by: Noah Watkins <noahwatkins@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-10-25 16:10:16 -07:00
Sage Weil
b61c27636f libceph: don't complain on msgpool alloc failures
The pool allocation failures are masked by the pool; there is no need to
spam the console about them.  (That's the whole point of having the pool
in the first place.)

Mark msg allocations whose failure is safely handled as such.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-10-25 16:10:15 -07:00
Sage Weil
6ab00d465a libceph: create messenger with client
This simplifies the init/shutdown paths, and makes client->msgr available
during the rest of the setup process.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-10-25 16:10:15 -07:00
Sage Weil
6a8ea4706a ceph: document ioctls
...after some prodding by Christoph.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-10-25 16:10:15 -07:00
Sage Weil
0d66a487c1 ceph: implement (optional) max read size
The 'rsize' mount option limits the maximum size of an individual
read(ahead) operation that is sent off to an OSD.  This is distinct from
'rasize', which controls the size of the readahead window.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-10-25 16:10:15 -07:00
Sage Weil
83817e35cb ceph: rename rsize -> rasize
It controls readahead.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-10-25 16:10:15 -07:00
Sage Weil
7c272194e6 ceph: make readpages fully async
When we get a ->readpages() aop, submit async reads for all page ranges
in the provided page list.  Lock the pages immediately, so that VFS/MM
will block until the reads complete.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-10-25 16:10:14 -07:00
Linus Torvalds
ef78cc75f1 Merge branch 'nfs-for-3.2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
* 'nfs-for-3.2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (26 commits)
  Check validity of cl_rpcclient in nfs_server_list_show
  NFS: Get rid of the nfs_rdata_mempool
  NFS: Don't rely on PageError in nfs_readpage_release_partial
  NFS: Get rid of unnecessary calls to ClearPageError() in read code
  NFS: Get rid of nfs_restart_rpc()
  NFS: Get rid of the unused nfs_write_data->flags field
  NFS: Get rid of the unused nfs_read_data->flags field
  NFSv4: Translate NFS4ERR_BADNAME into ENOENT when applied to a lookup
  NFS: Remove the unused "lookupfh()" version of nfs4_proc_lookup()
  NFS: Use the inode->i_version to cache NFSv4 change attribute information
  SUNRPC: Remove unnecessary export of rpc_sockaddr2uaddr
  SUNRPC: Fix rpc_sockaddr2uaddr
  nfs/super.c: local functions should be static
  pnfsblock: fix writeback deadlock
  pnfsblock: fix NULL pointer dereference
  pnfs: recoalesce when ld read pagelist fails
  pnfs: recoalesce when ld write pagelist fails
  pnfs: make _set_lo_fail generic
  pnfsblock: add missing rpc_put_mount and path_put
  SUNRPC/NFS: make rpc pipe upcall generic
  ...
2011-10-25 15:44:06 +02:00
Linus Torvalds
1442d1678c Merge branch 'for-3.2' of git://linux-nfs.org/~bfields/linux
* 'for-3.2' of git://linux-nfs.org/~bfields/linux: (103 commits)
  nfs41: implement DESTROY_CLIENTID operation
  nfsd4: typo logical vs bitwise negate for want_mask
  nfsd4: allow NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL | NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED
  nfsd4: seq->status_flags may be used unitialized
  nfsd41: use SEQ4_STATUS_BACKCHANNEL_FAULT when cb_sequence is invalid
  nfsd4: implement new 4.1 open reclaim types
  nfsd4: remove unneeded CLAIM_DELEGATE_CUR workaround
  nfsd4: warn on open failure after create
  nfsd4: preallocate open stateid in process_open1()
  nfsd4: do idr preallocation with stateid allocation
  nfsd4: preallocate nfs4_file in process_open1()
  nfsd4: clean up open owners on OPEN failure
  nfsd4: simplify process_open1 logic
  nfsd4: make is_open_owner boolean
  nfsd4: centralize renew_client() calls
  nfsd4: typo logical vs bitwise negate
  nfs: fix bug about IPv6 address scope checking
  nfsd4: more robust ignoring of WANT bits in OPEN
  nfsd4: move name-length checks to xdr
  nfsd4: move access/deny validity checks to xdr code
  ...
2011-10-25 15:42:01 +02:00
Darrick J. Wong
cf8039036a ext4: prevent stack overrun in ext4_file_open
In ext4_file_open, the filesystem records the mountpoint of the first
file that is opened after mounting the filesystem.  It does this by
allocating a 64-byte stack buffer, calling d_path() to grab the mount
point through which this file was accessed, and then memcpy()ing 64
bytes into the superblock's s_last_mounted field, starting from the
return value of d_path(), which is stored as "cp".  However, if cp >
buf (which it frequently is since path components are prepended
starting at the end of buf) then we can end up copying stack data into
the superblock.

Writing stack variables into the superblock doesn't sound like a great
idea, so use strlcpy instead.  Andi Kleen suggested using strlcpy
instead of strncpy.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-25 09:18:41 -04:00
Eric W. Biederman
b9e2780d57 sysfs: Remove support for tagged directories with untagged members (again)
In commit 8a9ea3237e ("Merge git://.../davem/net-next") where my sysfs
changes from the net tree merged with the sysfs rbtree changes from
Mickulas Patocka the conflict resolution failed to preserve the
simplified property that was the point of my changes.

That is sysfs_find_dirent can now say something is a match if and only
s_name and s_ns match what we are looking for, and sysfs_readdir can
simply return all of the directory entries where s_ns matches the
directory that we should be returning.

Now that we are back to exact matches we can tweak sysfs_find_dirent and
the name rb_tree to order sysfs_dirents by s_ns s_name and remove the
second loop in sysfs_find_dirent.  However that change seems a bit much
for a conflict resolution so it can come later.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-25 15:10:28 +02:00
Dmitry Monakhov
a4e5d88b1b ext4: update EOFBLOCKS flag on fallocate properly
EOFBLOCK_FL should be updated if called w/o FALLOCATE_FL_KEEP_SIZE
Currently it happens only if new extent was allocated.

TESTCASE:
fallocate test_file -n -l4096
fallocate test_file -l4096
Last fallocate cmd has updated size, but keept EOFBLOCK_FL set. And
fsck will complain about that.

Also remove ping pong in ext4_fallocate() in case of new extents,
where ext4_ext_map_blocks() clear EOFBLOCKS bit, and later
ext4_falloc_update_inode() restore it again.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-25 08:15:12 -04:00
Linus Torvalds
8a9ea3237e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.
2011-10-25 13:25:22 +02:00
Stanislav Kinsbursky
16d0587090 NFSd: call svc rpcbind cleanup explicitly
We have to call svc_rpcb_cleanup() explicitly from nfsd_last_thread() since
this function is registered as service shutdown callback and thus nobody else
will done it for us.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-25 13:19:40 +02:00
Linus Torvalds
2d03423b23 Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
  mm: memory hotplug: Check if pages are correctly reserved on a per-section basis
  Revert "memory hotplug: Correct page reservation checking"
  Update email address for stable patch submission
  dynamic_debug: fix undefined reference to `__netdev_printk'
  dynamic_debug: use a single printk() to emit messages
  dynamic_debug: remove num_enabled accounting
  dynamic_debug: consolidate repetitive struct _ddebug descriptor definitions
  uio: Support physical addresses >32 bits on 32-bit systems
  sysfs: add unsigned long cast to prevent compile warning
  drivers: base: print rejected matches with DEBUG_DRIVER
  memory hotplug: Correct page reservation checking
  memory hotplug: Refuse to add unaligned memory regions
  remove the messy code file Documentation/zh_CN/SubmitChecklist
  ARM: mxc: convert device creation to use platform_device_register_full
  new helper to create platform devices with dma mask
  docs/driver-model: Update device class docs
  docs/driver-model: Document device.groups
  kobj_uevent: Ignore if some listeners cannot handle message
  dynamic_debug: make netif_dbg() call __netdev_printk()
  dynamic_debug: make netdev_dbg() call __netdev_printk()
  ...
2011-10-25 12:13:59 +02:00
Linus Torvalds
59e5253417 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits)
  MAINTAINERS: linux-m32r is moderated for non-subscribers
  linux@lists.openrisc.net is moderated for non-subscribers
  Drop default from "DM365 codec select" choice
  parisc: Kconfig: cleanup Kernel page size default
  Kconfig: remove redundant CONFIG_ prefix on two symbols
  cris: remove arch/cris/arch-v32/lib/nand_init.S
  microblaze: add missing CONFIG_ prefixes
  h8300: drop puzzling Kconfig dependencies
  MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers
  tty: drop superfluous dependency in Kconfig
  ARM: mxc: fix Kconfig typo 'i.MX51'
  Fix file references in Kconfig files
  aic7xxx: fix Kconfig references to READMEs
  Fix file references in drivers/ide/
  thinkpad_acpi: Fix printk typo 'bluestooth'
  bcmring: drop commented out line in Kconfig
  btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888'
  doc: raw1394: Trivial typo fix
  CIFS: Don't free volume_info->UNC until we are entirely done with it.
  treewide: Correct spelling of successfully in comments
  ...
2011-10-25 12:11:02 +02:00
Dmitry Monakhov
750c9c47a5 ext4: remove messy logic from ext4_ext_rm_leaf
- Both callers(truncate and punch_hole) already aligned left end point
  so we no longer need split logic here.
- Remove dead duplicated code.
- Call ext4_ext_dirty only after we have updated eh_entries, otherwise
  we'll loose entries update. Regression caused by d583fb87a3
  266'th testcase in xfstests (http://patchwork.ozlabs.org/patch/120872)

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-25 05:35:05 -04:00
Linus Torvalds
36b8d186e6 Merge branch 'next' of git://selinuxproject.org/~jmorris/linux-security
* 'next' of git://selinuxproject.org/~jmorris/linux-security: (95 commits)
  TOMOYO: Fix incomplete read after seek.
  Smack: allow to access /smack/access as normal user
  TOMOYO: Fix unused kernel config option.
  Smack: fix: invalid length set for the result of /smack/access
  Smack: compilation fix
  Smack: fix for /smack/access output, use string instead of byte
  Smack: domain transition protections (v3)
  Smack: Provide information for UDS getsockopt(SO_PEERCRED)
  Smack: Clean up comments
  Smack: Repair processing of fcntl
  Smack: Rule list lookup performance
  Smack: check permissions from user space (v2)
  TOMOYO: Fix quota and garbage collector.
  TOMOYO: Remove redundant tasklist_lock.
  TOMOYO: Fix domain transition failure warning.
  TOMOYO: Remove tomoyo_policy_memory_lock spinlock.
  TOMOYO: Simplify garbage collector.
  TOMOYO: Fix make namespacecheck warnings.
  target: check hex2bin result
  encrypted-keys: check hex2bin result
  ...
2011-10-25 09:45:31 +02:00
Boaz Harrosh
44231e686b ore: Enable RAID5 mounts
Now that we support raid5 Enable it at mount. Raid6 will come next
raid4 is not demanded for so it will probably not be enabled.
(Until some one wants it)

NOTE: That mkfs.exofs had support for raid5/6 since long time
ago. (Making an empty raidX FS is just as easy as raid0 ;-} )

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24 17:22:29 -07:00
Boaz Harrosh
dd29661997 exofs: Support for RAID5 read-4-write interface.
The ore need suplied a r4w_get_page/r4w_put_page API
from Filesystem so it can get cache pages to read-into when
writing parial stripes.

Also I commented out and NULLed the .writepage (singular)
vector. Because it gives terrible write pattern to raid
and is apparently not needed. Even in OOM conditions the
system copes (even better) with out it.

TODO: How to specify to write_cache_pages() to start
      or include a certain page?

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24 17:22:28 -07:00
Boaz Harrosh
769ba8d920 ore: RAID5 Write
This is finally the RAID5 Write support.

The bigger part of this patch is not the XOR engine itself, But the
read4write logic, which is a complete mini prepare_for_striping
reading engine that can read scattered pages of a stripe into cache
so it can be used for XOR calculation. That is, if the write was not
stripe aligned.

The main algorithm behind the XOR engine is the 2 dimensional array:
	struct __stripe_pages_2d.
A drawing might save 1000 words
---

__stripe_pages_2d
       |
 n = pages_in_stripe_unit;
 w = group_width - parity;
       |                            pages array presented to the XOR lib
       |                                                |
       V                                                |
 __1_page_stripe[0].pages --> [c0][c1]..[cw][c_par] <---|
       |                                                |
 __1_page_stripe[1].pages --> [c0][c1]..[cw][c_par] <---
       |
...    |                         ...
       |
 __1_page_stripe[n].pages --> [c0][c1]..[cw][c_par]
                               ^
                               |
           data added columns first then row

---
The pages are put on this array columns first. .i.e:
	p0-of-c0, p1-of-c0, ... pn-of-c0, p0-of-c1, ...
So we are doing a corner turn of the pages.

Note that pages will zigzag down and left. but are put sequentially
in growing order. So when the time comes to XOR the stripe, only the
beginning and end of the array need be checked. We scan the array
and any NULL spot will be field by pages-to-be-read.

The FS that wants to support RAID5 needs to supply an
operations-vector that searches a given page in cache, and specifies
if the page is uptodate or need reading. All these pages to be read
are put on a slave ore_io_state and synchronously read. All the pages
of a stripe are read in one IO, using the scatter gather mechanism.

In write we constrain our IO to only be incomplete on a single
stripe. Meaning either the complete IO is within a single stripe so
we might have pages to read from both beginning  or end of the
strip. Or we have some reading to do at beginning but end at strip
boundary. The left over pages are pushed to the next IO by the API
already established by previous work, where an IO offset/length
combination presented to the ORE might get the length truncated and
the user must re-submit the leftover pages. (Both exofs and NFS
support this)

But any ORE user should make it's best effort to align it's IO
before hand and avoid complications. A cached ore_layout->stripe_size
member can be used for that calculation. (NOTE: that ORE demands
that stripe_size may not be bigger then 32bit)

What else? Well read it and tell me.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24 17:15:33 -07:00
Boaz Harrosh
a1fec1dbbc ore: RAID5 read
This patch introduces the first stage of RAID5 support
mainly the skip-over-raid-units when reading. For
writes it inserts BLANK units, into where XOR blocks
should be calculated and written to.

It introduces the new "general raid maths", and the main
additional parameters and components needed for raid5.

Since at this stage it could corrupt future version that
actually do support raid5. The enablement of raid5
mounting and setting of parity-count > 0 is disabled. So
the raid5 code will never be used. Mounting of raid5 is
only enabled later once the basic XOR write is also in.
But if the patch "enable RAID5" is applied this code has
been tested to be able to properly read raid5 volumes
and is according to standard.

Also it has been tested that the new maths still properly
supports RAID0 and grouping code just as before.
(BTW: I have found more bugs in the pnfs-obj RAID math
 fixed here)

The ore.c file is getting too big, so new ore_raid.[hc]
files are added that will include the special raid stuff
that are not used in striping and mirrors. In future write
support these will get bigger.
When adding the ore_raid.c to Kbuild file I was forced to
rename ore.ko to libore.ko. Is it possible to keep source
file, say ore.c and module file ore.ko the same even if there
are multiple files inside ore.ko?

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24 16:55:36 -07:00
Boaz Harrosh
3e335672e0 fs/Makefile: Always inspect exofs/
fs/exofs directory has multiple targets now, of which the
ore.ko will be needed by the pnfs-objects-layout-driver
(fs/nfs/objlayout).

As suggested by: Michal Marek <mmarek@suse.cz>  convert
inclusion of exofs/ from obj-$(CONFIG_EXOFS_FS) => obj-$(y).
So ORE can be selected also from fs/nfs/Kconfig

CC: Michal Marek <mmarek@suse.cz>
CC: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24 16:36:33 -07:00
Boaz Harrosh
611d7a5dc6 ore: Make ore_calc_stripe_info EXPORT_SYMBOL
ore_calc_stripe_info is needed by exofs::export.c
for the layout calculations. Make it exportable

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-10-24 16:30:08 -07:00
David S. Miller
1805b2f048 Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/net 2011-10-24 18:18:09 -04:00
Pavel Shilovsky
32b9aaf1a5 CIFS: Make cifs_push_locks send as many locks at once as possible
that reduces a traffic and increases a performance.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-24 13:11:55 -05:00
Pavel Shilovsky
9ee305b70e CIFS: Send as many mandatory unlock ranges at once as possible
that reduces a traffic and increases a performance.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-24 13:11:52 -05:00
Pavel Shilovsky
4f6bcec910 CIFS: Implement caching mechanism for posix brlocks
to handle all lock requests on the client in an exclusive oplock case.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-24 12:29:27 -05:00
Pavel Shilovsky
85160e03a7 CIFS: Implement caching mechanism for mandatory brlocks
If we have an oplock and negotiate mandatory locking style we handle
all brlock requests on the client.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Acked-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-24 12:27:01 -05:00
Aneesh Kumar K.V
348b59012e net/9p: Convert net/9p protocol dumps to tracepoints
This helps in more control over debugging.
root@qemu-img-64:~# ls /pass/123
ls: cannot access /pass/123: No such file or directory
root@qemu-img-64:~# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
#           TASK-PID    CPU#    TIMESTAMP  FUNCTION
#              | |       |          |         |
              ls-1536  [001]    70.928584: 9p_protocol_dump: clnt 18446612132784021504 P9_TWALK(tag = 1)
000: 16 00 00 00 6e 01 00 01 00 00 00 02 00 00 00 01
010: 00 03 00 31 32 33 00 00 00 ff ff ff ff 00 00 00

              ls-1536  [001]    70.928587: <stack trace>
 => trace_9p_protocol_dump
 => p9pdu_finalize
 => p9_client_rpc
 => p9_client_walk
 => v9fs_vfs_lookup
 => d_alloc_and_lookup
 => walk_component
 => path_lookupat
              ls-1536  [000]    70.929696: 9p_protocol_dump: clnt 18446612132784021504 P9_RLERROR(tag = 1)
000: 0b 00 00 00 07 01 00 02 00 00 00 4e 03 00 02 00
010: 00 00 00 00 03 00 02 00 00 00 00 00 ff 43 00 00

              ls-1536  [000]    70.929697: <stack trace>
 => trace_9p_protocol_dump
 => p9_client_rpc
 => p9_client_walk
 => v9fs_vfs_lookup
 => d_alloc_and_lookup
 => walk_component
 => path_lookupat
 => do_path_lookup

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-10-24 11:13:12 -05:00
Aneesh Kumar K.V
4d5077f1b2 fs/9p: Cleanup option parsing in 9p
Instead of saying all integer argument option should be listed in the beginning
move integer parsing to each option type.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-10-24 11:13:12 -05:00
Aneesh Kumar K.V
464f5ecf00 fs/9p: inode file operation is properly initialized init_special_inode
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-10-24 11:13:11 -05:00
Aneesh Kumar K.V
abfa034e4b fs/9p: Update zero-copy implementation in 9p
* remove lot of update to different data structure
* add a seperate callback for zero copy request.
* above makes non zero copy code path simpler
* remove conditionalizing TREAD/TREADDIR/TWRITE in the zero copy path
* Fix the dotu p9_check_errors with zero copy. Add sufficient doc around
* Add support for both in and output buffers in zero copy callback
* pin and unpin pages in the same context
* use helpers instead of defining page offset and rest of page ourself
* Fix mem leak in p9_check_errors
* Remove 'E' and 'F' in p9pdu_vwritef

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2011-10-24 11:13:11 -05:00
Tao Ma
9562ad9ab3 block: Remove the control of complete cpu from bio.
bio originally has the functionality to set the complete cpu, but
it is broken.

Chirstoph said that "This code is unused, and from the all the
discussions lately pretty obviously broken.  The only thing keeping
it serves is creating more confusion and possibly more bugs."

And Jens replied with "We can kill bio_set_completion_cpu(). I'm fine
with leaving cpu control to the request based drivers, they are the
only ones that can toggle the setting anyway".

So this patch tries to remove all the work of controling complete cpu
from a bio.

Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-24 16:11:30 +02:00
David Sterba
dff51cd1c6 btrfs: ratelimit WARN_ON in use_block_rsv
The WARN_ON under some circumstances heavily polute log and slow down
the machine. This is just a safety, as the warning should be fixed by
another patch, nevertheless, it still pops up during testing.

Signed-off-by: David Sterba <dsterba@suse.cz>
2011-10-24 14:48:00 +02:00
David Sterba
a81d3b1ba2 Merge branch 'hotfixes-20111024/josef/for-chris' into btrfs-next-stable 2011-10-24 14:47:58 +02:00
David Sterba
afd582ac8f Merge remote-tracking branch 'remotes/josef/for-chris' into btrfs-next-stable 2011-10-24 14:47:57 +02:00
David Sterba
f9d9ef62cd btrfs: do not allow mounting non-subvolumes via subvol option
There's a missing test whether the path passed to subvol=path option
during mount is a real subvolume, allowing any directory located in
default subovlume to be passed and accepted for mount.

(current btrfs progs prevent this early)
$ btrfs subvol snapshot . p1-snap
ERROR: '.' is not a subvolume

(with "is subvolume?" test bypassed)
$ btrfs subvol snapshot . p1-snap
Create a snapshot of '.' in './p1-snap'

$ btrfs subvol list -p .
ID 258 parent 5 top level 5 path subvol
ID 259 parent 5 top level 5 path subvol1
ID 260 parent 5 top level 5 path default-subvol1
ID 262 parent 5 top level 5 path p1/p1-snapshot
ID 263 parent 259 top level 5 path subvol1/subvol1-snap

The problem I see is that this makes a false impression of snapshotting the
given subvolume but in fact snapshots the default one: a user expects outcome
like ID 263 but in fact gets ID 262 .

This patch makes mount fail with EINVAL with a message in syslog.

Signed-off-by: David Sterba <dsterba@suse.cz>
2011-10-24 14:43:25 +02:00
Mi Jinlong
345c284290 nfs41: implement DESTROY_CLIENTID operation
According to rfc5661 18.50, implement DESTROY_CLIENTID operation.

Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-24 04:24:30 -04:00
Benny Halevy
92bac8c5d6 nfsd4: typo logical vs bitwise negate for want_mask
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-24 04:24:29 -04:00
Benny Halevy
c668fc6dfc nfsd4: allow NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL | NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED
RFC5661 says:
   The client may set one or both of
   OPEN4_SHARE_ACCESS_WANT_SIGNAL_DELEG_WHEN_RESRC_AVAIL and
   OPEN4_SHARE_ACCESS_WANT_PUSH_DELEG_WHEN_UNCONTENDED.

Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-24 04:24:28 -04:00
Benny Halevy
fc0c3dd13b nfsd4: seq->status_flags may be used unitialized
Reported-by: Gopala Suryanarayana <gsuryanarayana@vmware.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-24 04:24:28 -04:00
Benny Halevy
5423732a71 nfsd41: use SEQ4_STATUS_BACKCHANNEL_FAULT when cb_sequence is invalid
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-24 04:24:27 -04:00
Pavel Shilovsky
42274bb22a CIFS: Fix DFS handling in cifs_get_file_info
We should call cifs_all_info_to_fattr in rc == 0 case only.

Cc: <stable@kernel.org>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-22 12:29:35 -05:00
Dmitry Monakhov
1939dd84b3 ext4: cleanup ext4_ext_grow_indepth code
Currently code make an impression what grow procedure is very complicated
and some mythical paths, blocks are involved. But in fact grow in depth
it relatively simple procedure:
 1) Just create new meta block and copy root data to that block.
 2) Convert root from extent to index if old depth == 0
 3) Update root block pointer

This patch does:
 - Reorganize code to make it more self explanatory
 - Do not pass path parameter to new_meta_block() in order to
   provoke allocation from inode's group because top-level block
   should site closer to it's inode, but not to leaf data block.

   [ This happens anyway, due to logic in mballoc; we should drop
     the path parameter from new_meta_block() entirely.  -- tytso ]

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-22 01:26:05 -04:00
Pavel Shilovsky
a2d6b6cacb CIFS: Fix error handling in cifs_readv_complete
In cifs_readv_receive we don't update rdata->result to error value
after kmap'ing a page. We should kunmap the page in the no error
case only.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-21 09:21:04 -05:00
Steven Whitehouse
b99b98dc26 GFS2: Move readahead of metadata during deallocation into its own function
Move the recently added readahead of the indirect pointer
tree during deallocation into its own function in order
that we can use it elsewhere in the future. Also this
fixes the resetting of the "first" variable in the
original patch.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:54 +01:00
Steven Whitehouse
9ae32429fe GFS2: Remove two unused variables
The two variables being initialised in gfs2_inplace_reserve
to track the file & line number of the caller are never
used, so we might as well remove them.

If something does go wrong, then a stack trace is probably
more useful anyway.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:52 +01:00
Steven Whitehouse
891a8e9335 GFS2: Misc fixes
Some items picked up through automated code analysis. A few bits
of unreachable code and two unchecked return values.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:51 +01:00
Benjamin Marzinski
64dd153c83 GFS2: rewrite fallocate code to write blocks directly
GFS2's fallocate code currently goes through the page cache. Since it's only
writing to the end of the file or to holes in it, it doesn't need to, and it
was causing issues on low memory environments. This patch pulls in some of
Steve's block allocation work, and uses it to simply allocate the blocks for
the file, and zero them out at allocation time.  It provides a slight
performance increase, and it dramatically simplifies the code.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:49 +01:00
Bob Peterson
bd5437a7d4 GFS2: speed up delete/unlink performance for large files
This patch improves the performance of delete/unlink
operations in a GFS2 file system where the files are large
by adding a layer of metadata read-ahead for indirect blocks.
Mileage will vary, but on my system, deleting an 8.6G file
dropped from 22 seconds to about 4.5 seconds.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:47 +01:00
Steven Whitehouse
f75bbfb4dd GFS2: Fix off-by-one in gfs2_blk2rgrpd
Bob reported:

I found an off-by-one problem with how I coded this section:
It should be:

+ else if (blk >= cur->rd_data0 + cur->rd_data)

In fact, cur->rd_data0 + cur->rd_data is the start of the next
rgrp (the next ri_addr), so without the "=" check it can land on
the wrong rgrp.

In all normal cases, this won't be a problem: you're searching
for a block _within_ the rgrp, which will pass the test properly.
Where it gets into trouble is if you search the rgrps for the
block exactly equal to ri_addr.  I don't think anything in the
kernel does this, but I found a place in gfs2-utils gfs2_edit
where it does.  So I definitely need to fix it in libgfs2.  I'd
like to suggest we fix it in the kernel as well for the sake of
keeping the functions similar.

So this patch fixes the above mentioned off by one error as well
as removing the unused parent pointer.

Reported-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:46 +01:00
Steven Whitehouse
13d921e371 GFS2: Clean up ->page_mkwrite
This patch brings gfs2's ->page_mkwrite uptodate with respect to the
expectations set by the VM. Also added is a check to wait if the fs
is frozen, before we attempt to get a glock. This will only work on
the node which initiates the freeze, but thats ok since the transaction
lock will still provide the expected barrier on other nodes.

The major change here is that we return a locked page now, except when
we don't return a page at all (error cases). This removes the race
which required rechecking the page after it was returned.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Nick Piggin <npiggin@kernel.dk>
2011-10-21 12:39:44 +01:00
Steven Whitehouse
ccad4e147a GFS2: Correctly set goal block after allocation
The new goal block should be set to the end of the newly
allocated extent, not the start of it.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:42 +01:00
Steven Whitehouse
b5b24d7aeb GFS2: Fix AIL flush issue during fsync
Unfortunately, it is not enough to just ignore locked buffers during
the AIL flush from fsync. We need to be able to ignore all buffers
which are locked, dirty or pinned at this stage as they might have
been added subsequent to the log flush earlier in the fsync function.

In addition, this means that we no longer need to rely on i_mutex to
keep out writes during fsync, so we can, as a side-effect, remove
that protection too.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Tested-By: Abhijith Das <adas@redhat.com>
2011-10-21 12:39:41 +01:00
Steven Whitehouse
70b0c3656f GFS2: Use cached rgrp in gfs2_rlist_add()
Each block which is deallocated, requires a call to gfs2_rlist_add()
and each of those calls was calling gfs2_blk2rgrpd() in order to
figure out which rgrp the block belonged in. This can be speeded up
by making use of the rgrp cached in the inode. We also reset this
cached rgrp in case the block has changed rgrp. This should provide
a big reduction in gfs2_blk2rgrpd() calls during deallocation.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:39 +01:00
Steven Whitehouse
d56fa8a1c1 GFS2: Call do_strip() directly from recursive_scan()
The recursive_scan() function only ever takes a single "bc"
argument, so we might as well just call do_strip() directly
from resource_scan() rather than pass it in as an argument.

Also the "data" argument is always a struct strip_mine, so
we can pass that in, rather than using a void pointer.

This also moves do_strip() ahead of recursive_scan() so that
we don't need to add a prototype.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:38 +01:00
Steven Whitehouse
534029e2fd GFS2: Remove obsolete assert
Given that a resource group has been locked, there is no reason why
we should not be able to allocate as many blocks as are free. The
al_requested parameter should really be considered as a minimum
number of blocks to be available. Should this limit be overshot,
there are other mechanisms which will prevent over allocation.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:36 +01:00
Steven Whitehouse
54335b1fca GFS2: Cache the most recently used resource group in the inode
This means that after the initial allocation for any inode, the
last used resource group is cached in the inode for future use.
This drastically reduces the number of lookups of resource
groups in the common case, and this the contention on that
data structure.

The allocation algorithm is the same as previously, except that we
always check to see if the goal block is within the cached rgrp
first before going to the rbtree to look one up.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:34 +01:00
Steven Whitehouse
8339ee543e GFS2: Make resource groups "append only" during life of fs
Since we have ruled out supporting online filesystem shrink,
it is possible to make the resource group list append only
during the life of a super block. This gives several benefits:

Firstly, we only need to read new rindex elements as they are added
rather than needing to reread the whole rindex file each time one
element is added.

Secondly, the rindex glock can be held for much shorter periods of
time, and is completely removed from the fast path for allocations.
The lock is taken in shared mode only when updating the resource
groups when the first allocation occurs, and after a grow has
taken place.

Thirdly, this results in a reduction in code size, and everything
gets a lot simpler to understand in this area.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:33 +01:00
Bob Peterson
7c9ca62113 GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme
Here is an update of Bob's original rbtree patch which, in addition, also
resolves the rather strange ref counting that was being done relating to
the bitmap blocks.

Originally we had a dual system for journaling resource groups. The metadata
blocks were journaled and also the rgrp itself was added to a list. The reason
for adding the rgrp to the list in the journal was so that the "repolish
clones" code could be run to update the free space, and potentially send any
discard requests when the log was flushed. This was done by comparing the
"cloned" bitmap with what had been written back on disk during the transaction
commit.

Due to this, there was a requirement to hang on to the rgrps' bitmap buffers
until the journal had been flushed. For that reason, there was a rather
complicated set up in the ->go_lock ->go_unlock functions for rgrps involving
both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference
count on the buffers.

However, the journal maintains a reference count on the buffers anyway, since
they are being journaled as metadata buffers. So by moving the code which deals
with the post-journal accounting for bitmap blocks to the metadata journaling
code, we can entirely dispense with the rather strange buffer ref counting
scheme and also the requirement to journal the rgrps.

The net result of all this is that the ->sd_rindex_spin is left to do exactly
one job, and that is to look after the rbtree or rgrps.

This patch is designed to be a stepping stone towards using RCU for the rbtree
of resource groups, however the reduction in the number of uses of the
->sd_rindex_spin is likely to have benefits for multi-threaded workloads,
anyway.

The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also
be removed in future in favour of calling the functions directly where required
in the code. That will allow locking of resource groups without needing to
actually read them in - something that could be useful in speeding up statfs.

In the mean time though it is valid to dereference ->bi_bh only when the rgrp
is locked. This is basically the same rule as before, modulo the references not
being valid until the following journal flush.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-10-21 12:39:31 +01:00
Steven Whitehouse
9453615a1a GFS2: Fix lseek after SEEK_DATA, SEEK_HOLE have been added
We need to take the inode's glock whenever the inode's size
is referenced, otherwise it might not be uptodate. Even
though generic_file_llseek_unlocked() doesn't implement
SEEK_DATA, SEEK_HOLE directly, it does reference the inode's
size in those cases, so we need to add them to the list
of origins which need the glock.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
2011-10-21 12:39:29 +01:00
Steven Whitehouse
9a63edd12b GFS2: Clean up gfs2_create
If we pass through knowledge of whether the creation is intended to be
exclusive or not, then we can deal with that in gfs2_create_inode
and remove one set of locking. Also this removes the loop in
gfs2_create and simplifies the code a bit.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:28 +01:00
Steven Whitehouse
ab9bbda020 GFS2: Use ->dirty_inode()
The aim of this patch is to use the newly enhanced ->dirty_inode()
super block operation to deal with atime updates, rather than
piggy backing that code into ->write_inode() as is currently
done.

The net result is a simplification of the code in various places
and a reduction of the number of gfs2_dinode_out() calls since
this is now implied by ->dirty_inode().

Some of the mark_inode_dirty() calls have been moved under glocks
in order to take advantage of then being able to avoid locking in
->dirty_inode() when we already have suitable locks.

One consequence is that generic_write_end() now correctly deals
with file size updates, so that we do not need a separate check
for that afterwards. This also, indirectly, means that fdatasync
should work correctly on GFS2 - the current code always syncs the
metadata whether it needs to or not.

Has survived testing with postmark (with and without atime) and
also fsx.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:26 +01:00
Steven Whitehouse
f18185291d GFS2: Fix bug trap and journaled data fsync
Journaled data requires that a complete flush of all dirty data for
the file is done, in order that the ail flush which comes after
will succeed.

Also the recently enhanced bug trap can trigger falsely in case
an ail flush from fsync races with a page read. This updates the
bug trap such that it will ignore buffers which are locked and
only trigger on dirty and/or pinned buffers when the ail flush
is run from fsync. The original bug trap is retained when ail
flush is run from ->go_sync()

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:25 +01:00
Steven Whitehouse
40ac218f52 GFS2: Fix inode allocation error path
If we have got far enough through the inode allocation code
path that an inode has already been allocated, then we must
call iput to dispose of it, if an error occurs during a
later part of the process. This will always be the final iput
since there will be no other references to the inode.

Unlike when the inode has been unlinked, its block state will
be GFS2_BLKST_INODE rather than GFS2_BLKST_UNLINKED so we need
to skip the test in ->evict_inode() for this one case in order
to ensure that it will be deallocated correctly. This patch adds
a new flag in order to ensure that this will happen correctly.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:23 +01:00
Steven Whitehouse
1d4ec642d9 GFS2: Make atime checks more efficient
We do not need to start a transaction unless the atime
check has proved positive. Also if we are going to flush
the complete ail list anyway, we might as well skip the
writeback for this specific inode's metadata, since that
will be done as part of the ail writeback process in an
order offering potentially more efficient I/O.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:21 +01:00
Steven Whitehouse
75549186ed GFS2: Fix bug-trap in ail flush code
The assert was being tested under the wrong lock, a
legacy of the original code. Also, if it does trigger,
the resulting information was not always a lot of help.

This moves the patch under the correct lock and also
prints out more useful information in tacking down the
source of the problem.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:20 +01:00
Steven Whitehouse
2f0264d592 GFS2: Split data write & wait in fsync
Now that the data writing is part of fsync proper, we can split
the waiting part out and do it later on. This reduces the
number of waits that we do during fsync on average.

There is also no need to take the i_mutex unless we are flushing
metadata to disk, so we can move that to within the metadata
flushing code.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:18 +01:00
Steven Whitehouse
4c28d33803 GFS2: Clean up dir hash table reading
Since there is now only a single caller to gfs2_dir_read_data()
and it has a number of constant arguments, we can factor
those out. Also some tests relating to the inode size were
being done twice.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:17 +01:00
Dmitry Monakhov
45dc63e7d8 ext4: Allow quota file use root reservation
Quota file is fs's metadata, so it is reasonable  to permit use
root resevation if necessary. This patch fix 265'th xfstest failure

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-20 20:07:23 -04:00
Malahal Naineni
940aab4902 Check validity of cl_rpcclient in nfs_server_list_show
As soon as the nfs_client gets created, its cl_rpcclient is set to
ERR_PTR(-EINVAL). The rpc client structure is allocated later. Check
if the client is ready before using the cl_rpcclient pointer.

Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-10-20 18:44:04 -05:00
Kazuya Mio
8de49e674a ext4: fix the deadlock in mpage_da_map_and_submit()
If ext4_jbd2_file_inode() in mpage_da_map_and_submit() fails due to
journal abort, this function returns to caller without unlocking the
page.  It leads to the deadlock, and the patch fixes this issue by
calling mpage_da_submit_io().

Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-20 19:23:08 -04:00
Akira Fujita
09e0834fb0 ext4: fix deadlock in ext4_ordered_write_end()
If ext4_jbd2_file_inode() in ext4_ordered_write_end() fails for some
reasons, this function returns to caller without unlocking the page.
It leads to the deadlock, and the patch fixes this issue.

Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-20 18:56:10 -04:00
Ilya Dryomov
20bcd64934 Btrfs: close all bdevs on mount failure
Fix a bug introduced by 20b45077.  We have to return EINVAL on mount
failure, but doing that too early in the sequence leaves all of the
devices opened exclusively.  This also fixes an issue where under some
scenarios only a second mount -o degraded <devices> command would
succeed.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2011-10-20 18:20:57 +02:00
Ilya Dryomov
5f524444c3 Btrfs: fix a bug when opening seed devices
Initialize fs_info->bdev_holder a bit earlier to be able to pass a
correct holder id to blkdev_get() when opening seed devices with O_EXCL.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2011-10-20 18:20:36 +02:00
Daniel J Blueman
068132bad1 btrfs: fix oops on failure path
If lookup_extent_backref fails, path->nodes[0] reasonably could be
null along with other callers of btrfs_print_leaf, so ensure we have a
valid extent buffer before dereferencing.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
2011-10-20 18:10:50 +02:00
Miao Xie
60d2adbb1e Btrfs: fix race between multi-task space allocation and caching space
The task may fail to get free space though it is enough when multi-task
space allocation and caching space happen at the same time.

	Task1			Caching Thread		Task2
	------------------------------------------------------------------------
	find_free_extent
	  The space has not
	  be cached, and start
	  caching thread. And
	  wait for it.
				cache space, if
				the space is > 2MB
				wake up Task1
							find_free_extent
							  get all the space that
							  is cached.
	  try to allocate space,
	  but there is no space
	  now.
	trigger BUG_ON()

The message is following:
btrfs allocation failed flags 1, wanted 4096
space_info has 1040187392 free, is not full
space_info total=1082130432, used=4096, pinned=41938944, reserved=0, may_use=40828928, readonly=0
block group 12582912 has 8388608 bytes, 0 used 8388608 pinned 0 reserved
block group has cluster?: no
0 blocks of free space at or bigger than bytes is
block group 1103101952 has 1073741824 bytes, 4096 used 33550336 pinned 0 reserved
block group has cluster?: no
0 blocks of free space at or bigger than bytes is
------------[ cut here ]------------
kernel BUG at fs/btrfs/inode.c:835!
 [<ffffffffa031261b>] __extent_writepage+0x1bf/0x5ce [btrfs]
 [<ffffffff810cbcb8>] ? __set_page_dirty_nobuffers+0xfe/0x108
 [<ffffffffa02f8ada>] ? wait_current_trans+0x23/0xec [btrfs]
 [<ffffffff810c3fbf>] ? find_get_pages_tag+0x73/0xe2
 [<ffffffffa0312d12>] extent_write_cache_pages.clone.0+0x176/0x29a [btrfs]
 [<ffffffffa0312e74>] extent_writepages+0x3e/0x53 [btrfs]
 [<ffffffff8110ad2c>] ? do_sync_write+0xc6/0x103
 [<ffffffffa0302d6e>] ? btrfs_submit_direct+0x414/0x414 [btrfs]
 [<ffffffff811380fa>] ? fsnotify+0x236/0x266
 [<ffffffffa02fc930>] btrfs_writepages+0x22/0x24 [btrfs]
 [<ffffffff810cc215>] do_writepages+0x1c/0x25
 [<ffffffff810c4958>] __filemap_fdatawrite_range+0x4e/0x50
 [<ffffffff810c4982>] filemap_write_and_wait_range+0x28/0x51
 [<ffffffffa0306b2e>] btrfs_sync_file+0x7d/0x198 [btrfs]
 [<ffffffff8110aa26>] ? fsnotify_modify+0x5d/0x65
 [<ffffffff8112d150>] vfs_fsync_range+0x18/0x21
 [<ffffffff8112d170>] vfs_fsync+0x17/0x19
 [<ffffffff8112d316>] do_fsync+0x29/0x3e
 [<ffffffff8112d348>] sys_fsync+0xb/0xf
 [<ffffffff81468352>] system_call_fastpath+0x16/0x1b
[SNIP]
RIP  [<ffffffffa02fe08c>] cow_file_range+0x1c4/0x32b [btrfs]

We fix this bug by trying to allocate the space again if there are block groups
in caching.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
2011-10-20 18:10:49 +02:00
Tsutomu Itoh
cfbffc39ac Btrfs: fix return value of btrfs_get_acl()
In btrfs_get_acl(), when the second __btrfs_getxattr() call fails,
acl is not correctly set.
Therefore, a wrong value might return to the caller.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
2011-10-20 18:10:47 +02:00
Ilya Dryomov
10b2f34d6e Btrfs: pass the correct root to lookup_free_space_inode()
Free space items are located in tree of tree roots, not in the extent
tree.  It didn't pop up because lookup_free_space_inode() grabs the
inode all the time instead of actually searching the tree.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2011-10-20 18:10:46 +02:00
Liu Bo
fee187d9d9 Btrfs: do not set EXTENT_DIRTY along with EXTENT_DELALLOC
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
2011-10-20 18:10:45 +02:00
Li Zefan
f0dd9592a1 Btrfs: fix direct-io vs nodatacow
To reproduce the bug:

  # mount -o nodatacow /dev/sda7 /mnt/
  # dd if=/dev/zero of=/mnt/tmp bs=4K count=1
  1+0 records in
  1+0 records out
  4096 bytes (4.1 kB) copied, 0.000136115 s, 30.1 MB/s
  # dd if=/dev/zero of=/mnt/tmp bs=4K count=1 conv=notrunc oflag=direct
  dd: writing `/mnt/tmp': Input/output error
  1+0 records in
  0+0 records out

btrfs_ordered_update_i_size() may return 1, but btrfs_endio_direct_write()
mistakenly takes it as an error.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-10-20 18:10:44 +02:00
Li Zefan
560f7d7545 Btrfs: remove BUG_ON() in compress_file_range()
It's not a big deal if we fail to allocate the array, and instead of
panic we can just give up compressing.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-10-20 18:10:43 +02:00
Li Zefan
a05a9bb18a Btrfs: fix array bound checking
Otherwise we can execced the array bound of path->slots[].

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-10-20 18:10:41 +02:00
Lukas Czerner
f4c697e640 btrfs: return EINVAL if start > total_bytes in fitrim ioctl
We should retirn EINVAL if the start is beyond the end of the file
system in the btrfs_ioctl_fitrim(). Fix that by adding the appropriate
check for it.

Also in the btrfs_trim_fs() it is possible that len+start might overflow
if big values are passed. Fix it by decrementing the len so that start+len
is equal to the file system size in the worst case.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
2011-10-20 18:10:40 +02:00
Li Zefan
008873eafb Btrfs: honor extent thresh during defragmentation
We won't defrag an extent, if it's bigger than the threshold we
specified and there's no small extent before it, but actually
the code doesn't work this way.

There are three bugs:

- When should_defrag_range() decides we should keep on defragmenting
  an extent, last_len is not incremented. (old bug)

- The length that passes to should_defrag_range() is not the length
  we're going to defrag. (new bug)

- We always defrag 256K bytes data, and a big extent can be part of
  this range. (new bug)

For a file with 4 extents:

        | 4K | 4K | 256K | 256K |

The result of defrag with (the default) 256K extent thresh should be:

        | 264K | 256K |

but with those bugs, we'll get:

        | 520K |

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-10-20 18:10:39 +02:00
Jeff Liu
83c8c9bde0 btrfs: trivial fix, a potential memory leak in btrfs_parse_early_options()
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
2011-10-20 18:10:38 +02:00
Li Zefan
5ca496604b Btrfs: fix wrong max_to_defrag in btrfs_defrag_file()
It's off-by-one, and thus we may skip the last page while defragmenting.

An example case:

  # create /mnt/file with 2 4K file extents
  # btrfs fi defrag /mnt/file
  # sync
  # filefrag /mnt/file
  /mnt/file: 2 extents found

So it's not defragmented.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-10-20 18:10:37 +02:00
Li Zefan
151a31b25e Btrfs: use i_size_read() in btrfs_defrag_file()
Don't use inode->i_size directly, since we're not holding i_mutex.

This also fixes another bug, that i_size can change after it's checked
against 0 and then (i_size - 1) can be negative.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-10-20 18:10:35 +02:00
Li Zefan
cbcc83265d Btrfs: fix defragmentation regression
There's an off-by-one bug:

  # create a file with lots of 4K file extents
  # btrfs fi defrag /mnt/file
  # sync
  # filefrag -v /mnt/file
  Filesystem type is: 9123683e
  File size of /mnt/file is 1228800 (300 blocks, blocksize 4096)
   ext logical physical expected length flags
     0       0     3372              64
     1      64     3136     3435      1
     2      65     3436     3136     64
     3     129     3201     3499      1
     4     130     3500     3201     64
     5     194     3266     3563      1
     6     195     3564     3266     64
     7     259     3331     3627      1
     8     260     3628     3331     40 eof

After this patch:

  ...
  # filefrag -v /mnt/file
  Filesystem type is: 9123683e
  File size of /mnt/file is 1228800 (300 blocks, blocksize 4096)
   ext logical physical expected length flags
     0       0     3372             300 eof
  /mnt/file: 1 extent found

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-10-20 18:10:34 +02:00
Diego Calleja
60ccf82f5b btrfs: fix memory leak in btrfs_defrag_file
kmemleak found this:
unreferenced object 0xffff8801b64af968 (size 512):
  comm "btrfs-cleaner", pid 3317, jiffies 4306810886 (age 903.272s)
  hex dump (first 32 bytes):
    00 82 01 07 00 ea ff ff c0 83 01 07 00 ea ff ff  ................
    80 82 01 07 00 ea ff ff c0 87 01 07 00 ea ff ff  ................
  backtrace:
    [<ffffffff816875cc>] kmemleak_alloc+0x5c/0xc0
    [<ffffffff8114aec3>] kmem_cache_alloc_trace+0x163/0x240
    [<ffffffff8127a290>] btrfs_defrag_file+0xf0/0xb20
    [<ffffffff8125d9a5>] btrfs_run_defrag_inodes+0x165/0x210
    [<ffffffff812479d7>] cleaner_kthread+0x177/0x190
    [<ffffffff81075c7d>] kthread+0x8d/0xa0
    [<ffffffff816af5f4>] kernel_thread_helper+0x4/0x10
    [<ffffffffffffffff>] 0xffffffffffffffff

"pages" is not always freed. Fix it removing the unnecesary additional return.

Signed-off-by: Diego Calleja <diegocg@gmail.com>
2011-10-20 18:10:33 +02:00
Yan, Zheng
84850e8d8a btrfs: check file extent backref offset underflow
Offset field in data extent backref can underflow if clone range ioctl
is used. We can reliably detect the underflow because max file size is
limited to 2^63 and max data extent size is limited by block group size.

Signed-off-by: Zheng Yan  <zheng.z.yan@intel.com>
2011-10-20 18:10:31 +02:00
Steve French
fbcae3ea16 Merge branch 'cifs-3.2' of git://git.samba.org/jlayton/linux into temp-3.2-jeff 2011-10-19 21:22:41 -05:00
Steve French
71c424bac5 [CIFS] Show nostrictsync and noperm mount options in /proc/mounts
Add support to print nostrictsync and noperm mount options in
/proc/mounts for shares mounted with these options.
(cleanup merge conflict in Sachin's original patch)

Suggested-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-19 20:44:48 -05:00
Eric W. Biederman
903e21e2ee sysfs: Reject with a warning invalid uses of tagged directories.
sysfs is a core piece of ifrastructure that many people use and
few people have all of the rules in their head on how to use
it correctly.  Add warnings for people using tagged directories
improperly to that any misuses can be caught and diagnosed quickly.

A single inexpensive test in sysfs_find_dirent is almost sufficient
to catch all possible misuses.  An additional warning is needed
in sysfs_add_dirent so that we actually fail when attempting to
add an untagged dirent in a tagged directory.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19 19:24:16 -04:00