Commit Graph

1831 Commits

Author SHA1 Message Date
Chris Wright
6faf17f6f1 PCI SR-IOV: correct broken resource alignment calculations
An SR-IOV capable device includes an SR-IOV PCIe capability which
describes the Virtual Function (VF) BAR requirements.  A typical SR-IOV
device can support multiple VFs whose BARs must be in a contiguous region,
effectively an array of VF BARs.  The BAR reports the size requirement
for a single VF.  We calculate the full range needed by simply multiplying
the VF BAR size with the number of possible VFs and create a resource
spanning the full range.

This all seems sane enough except it artificially inflates the alignment
requirement for the VF BAR.  The VF BAR need only be aligned to the size
of a single BAR not the contiguous range of VF BARs.  This can cause us
to fail to allocate resources for the BAR despite the fact that we
actually have enough space.

This patch adds a thin PCI specific layer over the generic
resource_alignment() function which is aware of the special nature of
VF BARs and does sorting and allocation based on the smaller alignment
requirement.

I recognize that while resource_alignment is generic, it's basically a
PCI helper.  An alternative to this patch is to add PCI VF BAR specific
information to struct resource.  I opted for the extra layer rather than
adding such PCI specific information to struct resource.  This does
have the slight downside that we don't cache the BAR size and re-read
for each alignment query (happens a small handful of times during boot
for each VF BAR).

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Yu Zhao <yu.zhao@intel.com>
Cc: stable@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-30 08:37:25 -07:00
Alek Du
c82f63e411 PCI: check saved state before restore
Without the check, the config space may be filled with zeros. Though
the driver should try to avoid call restoring before saving, but the
pci layer also should check this.

Also removes the existing check in pci_restore_standard_config, since
it's superfluous with the new check in restore_state.

Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-20 09:08:45 -07:00
Linus Torvalds
9b8f013a83 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI hotplug: SGI hotplug: do not use hotplug_slot_attr
  PCI hotplug: SGI hotplug: fix build failure
2009-08-10 11:00:37 -07:00
Kenji Kaneshige
94f81a47c4 PCI hotplug: SGI hotplug: do not use hotplug_slot_attr
By the pci slot changes, callbacks of attributes under slot directory
(/sys/bus/pci/slots) had been changed to get the pointer to struct
pci_slot instead of struct hotplug_slot. So the path_show() that
assumes the parameter is a pointer to struct hotplug_slot seems
broken.

Tested-by: Mike Habeck <habeck@sgi.com>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-07 10:36:27 -07:00
Kenji Kaneshige
d25f14389a PCI hotplug: SGI hotplug: fix build failure
The commit bd3d99c170 ("PCI: Remove
untested Electromechanical Interlock (EMI) support in pciehp."), which
removes the definition of "struct hotplug_slot_attr", broke SGI
hotplug driver. By this commit, we get the following compile error.

drivers/pci/hotplug/sgi_hotplug.c:106: error: variable 'sn_slot_path_attr' has initializer but incomplete type
drivers/pci/hotplug/sgi_hotplug.c:106: error: unknown field 'attr' specified in initializer
drivers/pci/hotplug/sgi_hotplug.c:106: error: extra brace group at end of initializer
drivers/pci/hotplug/sgi_hotplug.c:106: error: (near initialization for 'sn_slot_path_attr')
drivers/pci/hotplug/sgi_hotplug.c:106: warning: excess elements in struct initializer
drivers/pci/hotplug/sgi_hotplug.c:106: warning: (near initialization for 'sn_slot_path_attr')
drivers/pci/hotplug/sgi_hotplug.c:106: error: unknown field 'show' specified in initializer
drivers/pci/hotplug/sgi_hotplug.c:106: warning: excess elements in struct initializer
drivers/pci/hotplug/sgi_hotplug.c:106: warning: (near initialization for 'sn_slot_path_attr')
drivers/pci/hotplug/sgi_hotplug.c: In function 'sn_hp_destroy':
drivers/pci/hotplug/sgi_hotplug.c:203: error: invalid use of undefined type 'struct hotplug_slot_attribute'
drivers/pci/hotplug/sgi_hotplug.c: In function 'sn_hotplug_slot_register':
drivers/pci/hotplug/sgi_hotplug.c:655: error: invalid use of undefined type 'struct hotplug_slot_attribute'

This patch fixes this regression by adding the definition of struct
hotplug_slot_attr into sgi_hotplug.c.

Tested-by: Mike Habeck <habeck@sgi.com>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-07 10:36:26 -07:00
Sheng Yang
c5b1525533 intel-iommu: Fix enabling snooping feature by mistake
Two defects work together result in KVM device passthrough randomly can't
work:
1. iommu_snooping is not initialized to zero when vm_iommu_init() called.
So it is possible to get a random value.
2. One line added by commit 2c2e2c38("IOMMU Identity Mapping Support")
change the code path, let it bypass domain_update_iommu_cap(), as well as
missing the increment of domain iommu reference count.

The latter is also likely to cause a leak of domains on repeated VMM 
assignment and deassignment.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-06 11:35:50 +01:00
Fenghua Yu
33041ec049 intel-iommu: Mask physical address to correct page size in intel_map_single()
The physical address passed to domain_pfn_mapping() should be rounded 
down to the start of the MM page, not the VT-d page.

This issue causes kernel panic on PAGE_SIZE>VTD_PAGE_SIZE platforms e.g. ia64
platforms.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-05 09:15:48 +01:00
Fenghua Yu
f532959b77 intel-iommu: Correct sglist size calculation.
In domain_sg_mapping(), use aligned_nrpages() instead of hand-coded
rounding code for calculating the size of each sg elem. This means that
on IA64 we correctly round up to the MM page size, not just to the VT-d
page size.

Also remove the incorrect mm_to_dma_pfn() when intel_map_sg() calls
domain_sg_mapping() -- the 'size' variable is in VT-d pages already.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-05 08:59:47 +01:00
Linus Torvalds
79896cf42f Make pci_claim_resource() use request_resource() rather than insert_resource()
This function has traditionally used "insert_resource()", because before
commit cebd78a8c5 ("Fix pci_claim_resource") it used to just insert the
resource into whatever root resource tree that was indicated by
"pcibios_select_root()".

So there Matthew fixed it to actually look up the proper parent
resource, which means that now it's actively wrong to then traverse the
resource tree any more: we already know exactly where the new resource
should go.

And when we then did commit a76117dfd6 ("x86: Use pci_claim_resource"),
which changed the x86 PCI code from the open-coded

	pr = pci_find_parent_resource(dev, r);
	if (!pr || request_resource(pr, r) < 0) {

to using

	if (pci_claim_resource(dev, idx) < 0) {

that "insert_resource()" now suddenly became a problem, and causes a
regression covered by

	http://bugzilla.kernel.org/show_bug.cgi?id=13891

which this fixes.

Reported-and-tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Andrew Patterson <andrew.patterson@hp.com>
Cc: Linux PCI <linux-pci@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-02 14:10:18 -07:00
Alexey Dobriyan
405f55712d headers: smp_lock.h redux
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12 12:22:34 -07:00
Sheng Yang
4b99d35270 intel-iommu: Fix intel_iommu_unmap_range() with size 0
After some API change, intel_iommu_unmap_range() introduced a assumption that
parameter size != 0, otherwise the dma_pte_clean_range() would have a
overflowed argument. But the user like KVM don't have this assumption before,
then some BUG() triggered.

Fix it by ignoring size = 0.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08 09:35:10 -07:00
Linus Torvalds
dc53fffc10 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Fix IRQ swizzling for ARI-enabled devices
  ia64/PCI: adjust section annotation for pcibios_setup()
  x86/PCI: get root CRS before scanning children
  x86/PCI: fix boundary checking when using root CRS
  PCI MSI: Fix restoration of MSI/MSI-X mask states in suspend/resume
  PCI MSI: Unmask MSI if setup failed
  PCI MSI: shorten PCI_MSIX_ENTRY_* symbol names
  PCI: make pci_name() take const argument
  PCI: More PATA quirks for not entering D3
  PCI: fix kernel-doc warnings
  PCI: check if bus has a proper bridge device before triggering SBR
  PCI: remove pci_dac_dma_... APIs on mn10300
  PCI ECRC: Remove unnecessary semicolons
  PCI MSI: Return if alloc_msi_entry for MSI-X failed
2009-07-06 14:07:00 -07:00
David Woodhouse
3dfc813d94 intel-iommu: Don't use identity mapping for PCI devices behind bridges
Our current strategy for pass-through mode is to put all devices into
the 1:1 domain at startup (which is before we know what their dma_mask
will be), and only _later_ take them out of that domain, if it turns out
that they really can't address all of memory.

However, when there are a bunch of PCI devices behind a bridge, they all
end up with the same source-id on their DMA transactions, and hence in
the same IOMMU domain. This means that we _can't_ easily move them from
the 1:1 domain into their own domain at runtime, because there might be DMA
in-flight from their siblings.

So we have to adjust our pass-through strategy: For PCI devices not on
the root bus, and for the bridges which will take responsibility for
their transactions, we have to start up _out_ of the 1:1 domain, just in
case.

This fixes the BUG() we see when we have 32-bit-capable devices behind a
PCI-PCI bridge, and use the software identity mapping.

It does mean that we might end up using 'normal' mapping mode for some
devices which could actually live with the faster 1:1 mapping -- but
this is only for PCI devices behind bridges, which presumably aren't the
devices for which people are most concerned about performance.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-04 19:19:10 +01:00
David Woodhouse
6941af2810 intel-iommu: Use iommu_should_identity_map() at startup time too.
At boot time, the dma_mask won't have been set on any devices, so we
assume that all devices will be 64-bit capable (and thus get a 1:1 map).

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-04 19:19:08 +01:00
David Woodhouse
736768325e intel-iommu: No mapping for non-PCI devices
This should fix kernel.org bug #11821, where the dcdbas driver makes up
a platform device and then uses dma_alloc_coherent() on it, in an
attempt to get memory < 4GiB.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-04 14:12:01 +01:00
David Woodhouse
62edf5dc4a intel-iommu: Restore DMAR_BROKEN_GFX_WA option for broken graphics drivers
We need to give people a little more time to fix the broken drivers.
Re-introduce this, but tied in properly with the 'iommu=pt' support this
time. Change the config option name and make it default to 'no' too.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-04 10:59:46 +01:00
David Woodhouse
40e4aa3432 intel-iommu: Add iommu_should_identity_map() function
We do this twice, and it's about to get more complicated. This makes the
code slightly clearer about what it's doing, too.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-04 10:55:41 +01:00
David Woodhouse
1b7bc0a161 intel-iommu: Fix reattaching of devices to identity mapping domain
When we reattach a device to the si_domain (because it's been removed
from a VM), we weren't calling domain_context_mapping() to actually tell
the hardware about that.

We should really put the call to domain_context_mapping() into
domain_add_dev_info() -- we never call the latter without also doing the
former, and we can keep the error paths simple that way. But that's a
cleanup which can wait for 2.6.32 now.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-04 10:49:46 +01:00
David Woodhouse
1e4c64c46d intel-iommu: Don't set identity mapping for bypassed graphics devices
We should check iommu_dummy() _first_, because that means it's attached
to an iommu that we've just disabled completely. At the moment, we might
try to put the device into the identity mapping domain.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-04 10:40:44 +01:00
David Woodhouse
5a5e02a614 intel-iommu: Fix dma vs. mm page confusion with aligned_nrpages()
The aligned_nrpages() function rounds up to the next VM page, but
returns its result as a number of DMA pages.

Purely theoretical except on IA64, which doesn't boot with VT-d right
now anyway.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-04 09:35:52 +01:00
Linus Torvalds
405d7ca515 Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6: (38 commits)
  intel-iommu: Don't keep freeing page zero in dma_pte_free_pagetable()
  intel-iommu: Introduce first_pte_in_page() to simplify PTE-setting loops
  intel-iommu: Use cmpxchg64_local() for setting PTEs
  intel-iommu: Warn about unmatched unmap requests
  intel-iommu: Kill superfluous mapping_lock
  intel-iommu: Ensure that PTE writes are 64-bit atomic, even on i386
  intel-iommu: Make iommu=pt work on i386 too
  intel-iommu: Performance improvement for dma_pte_free_pagetable()
  intel-iommu: Don't free too much in dma_pte_free_pagetable()
  intel-iommu: dump mappings but don't die on pte already set
  intel-iommu: Combine domain_pfn_mapping() and domain_sg_mapping()
  intel-iommu: Introduce domain_sg_mapping() to speed up intel_map_sg()
  intel-iommu: Simplify __intel_alloc_iova()
  intel-iommu: Performance improvement for domain_pfn_mapping()
  intel-iommu: Performance improvement for dma_pte_clear_range()
  intel-iommu: Clean up iommu_domain_identity_map()
  intel-iommu: Remove last use of PHYSICAL_PAGE_MASK, for reserving PCI BARs
  intel-iommu: Make iommu_flush_iotlb_psi() take pfn as argument
  intel-iommu: Change aligned_size() to aligned_nrpages()
  intel-iommu: Clean up intel_map_sg(), remove domain_page_mapping()
  ...
2009-07-02 16:51:09 -07:00
David Woodhouse
6a43e574c5 intel-iommu: Don't keep freeing page zero in dma_pte_free_pagetable()
Check dma_pte_present() and only free the page if there _is_ one.
Kind of surprising that there was no warning about this.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-02 12:02:38 +01:00
David Woodhouse
75e6bf9638 intel-iommu: Introduce first_pte_in_page() to simplify PTE-setting loops
On Wed, 2009-07-01 at 16:59 -0700, Linus Torvalds wrote:
> I also _really_ hate how you do
>
>         (unsigned long)pte >> VTD_PAGE_SHIFT ==
>         (unsigned long)first_pte >> VTD_PAGE_SHIFT

Kill this, in favour of just looking to see if the incremented pte
pointer has 'wrapped' onto the next page. Which means we have to check
it _after_ incrementing it, not before.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-02 11:27:13 +01:00
Matthew Wilcox
46b952a3c3 PCI: Fix IRQ swizzling for ARI-enabled devices
For many purposes, including interrupt-swizzling, devices with ARI
enabled behave as if they have one device (number 0) and 256 functions.
This probably hasn't bitten us in practice because all ARI devices I've
seen are also IOV devices, and IOV devices are required to use MSI.
This isn't guaranteed, and there are legitimate reasons to use ARI
without IOV, and hence potentially use pin-based interrupts.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-07-01 14:24:30 -07:00
David Woodhouse
7766a3fb90 intel-iommu: Use cmpxchg64_local() for setting PTEs
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-01 20:27:03 +01:00
David Woodhouse
85b98276f2 intel-iommu: Warn about unmatched unmap requests
This would have found the bug in i386 pci_unmap_addr() a long time ago.
We shouldn't just silently return without doing anything.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-01 19:54:37 +01:00
David Woodhouse
206a73c102 intel-iommu: Kill superfluous mapping_lock
Since we're using cmpxchg64() anyway (because that's the only way to do
an atomic 64-bit store on i386), we might as well ditch the extra
locking and just use cmpxchg64() to ensure that we don't add the page
twice.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-01 19:43:37 +01:00
David Woodhouse
c85994e477 intel-iommu: Ensure that PTE writes are 64-bit atomic, even on i386
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-01 19:21:24 +01:00
David Woodhouse
a15a519ed6 Fix iommu address space allocation
This fixes kernel.org bug #13584. The IOVA code attempted to optimise
the insertion of new ranges into the rbtree, with the unfortunate result
that some ranges just didn't get inserted into the tree at all. Then
those ranges would be handed out more than once, and things kind of go
downhill from there.

Introduced after 2.6.25 by ddf02886cb
("PCI: iova RB tree setup tweak").

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: mark gross <mgross@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-01 11:19:29 -07:00
David Woodhouse
f3a0a52fff intel-iommu: Performance improvement for dma_pte_free_pagetable()
As with other functions, batch the CPU data cache flushes and don't keep
recalculating PTE addresses.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-30 03:58:15 +01:00
David Woodhouse
3d7b0e4154 intel-iommu: Don't free too much in dma_pte_free_pagetable()
The loop condition was wrong -- we should free a PMD only if its
_entire_ range is within the range we're intending to clear. The
early-termination condition was right, but not the loop.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-30 03:57:38 +01:00
David Woodhouse
1bf20f0dc5 intel-iommu: dump mappings but don't die on pte already set
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-30 03:55:21 +01:00
David Woodhouse
9051aa0268 intel-iommu: Combine domain_pfn_mapping() and domain_sg_mapping()
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-30 03:53:31 +01:00
David Woodhouse
e1605495c7 intel-iommu: Introduce domain_sg_mapping() to speed up intel_map_sg()
Instead of calling domain_pfn_mapping() repeatedly with single or
small numbers of pages, just pass the sglist in. It can optimise the
number of cache flushes like domain_pfn_mapping() does, and gives a huge
speedup for large scatterlists.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-30 03:51:30 +01:00
Hidetoshi Seto
12abb8ba84 PCI MSI: Fix restoration of MSI/MSI-X mask states in suspend/resume
There are 2 problems on mask states in suspend/resume.

[1]:
It is better to restore the mask states of MSI/MSI-X to initial states
(MSI is unmasked, MSI-X is masked) when we release the device.
The pci_msi_shutdown() does the restoration of mask states for MSI,
while the msi_free_irqs() does it for MSI-X.  In other words, in the
"disable" path both of MSI and MSI-X are handled, but in the "shutdown"
path only MSI is handled.

MSI:
   pci_disable_msi()
      => pci_msi_shutdown()
         [ mask states for MSI restored ]
         => msi_set_enable(dev, pos, 0);
      => msi_free_irqs()

MSI-X:
   pci_disable_msix()
      => pci_msix_shutdown()
         => msix_set_enable(dev, 0);
      => msix_free_all_irqs
         => msi_free_irqs()
            [ mask states for MSI-X restored ]

This patch moves the masking for MSI-X from msi_free_irqs() to
pci_msix_shutdown().

This change has some positive side effects:
 - It prevents OS from touching mask states before reading preserved
   bits in the register, which can be happen if msi_free_irqs() is
   called from error path in msix_capability_init().
 - It also prevents touching the register after turning off MSI-X in
   "disable" path, which can be a problem on some devices.

[2]:
We have cache of the mask state in msi_desc, which is automatically
updated when msi/msix_mask_irq() is called.  This cached states are
used for the resume.

But since what need to be restored in the resume is the states before
the shutdown on the suspend, calling msi/msix_mask_irq() from
pci_msi/msix_shutdown() is not appropriate.

This patch introduces __msi/msix_mask_irq() that do mask as same
as msi/msix_mask_irq() but does not update cached state, for use
in pci_msi/msix_shutdown().

[updated: get rid of msi/msix_mask_irq_nocache() (proposed by Matthew Wilcox)]

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-29 12:18:13 -07:00
Hidetoshi Seto
7ba1930db0 PCI MSI: Unmask MSI if setup failed
The initial state of mask register of MSI is unmasked.  We set it
masked before calling arch_setup_msi_irqs().  If arch_setup_msi_irq()
fails, it is better to restore the state of the mask register.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-29 12:16:19 -07:00
Hidetoshi Seto
2c21fd4b33 PCI MSI: shorten PCI_MSIX_ENTRY_* symbol names
These names are too long!  Drop _OFFSET to save some bytes/lines.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-29 12:15:19 -07:00
Alan Cox
7a661c6f10 PCI: More PATA quirks for not entering D3
The ALi loses some state if it goes into D3. Unfortunately even with the
chipset documents I can't figure out how to restore some bits of it.

The VIA one saves/restores apparently fine but the ACPI _GTM methods break
on some platforms if we do this and this causes cable misdetections.

These are both effectively regressions as historically nothing matched the
devices and then decided not to bind to them. Nowdays something is binding
to all sorts of devices and a result they get dumped into D3.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-29 12:14:04 -07:00
Randy Dunlap
503998ca4a PCI: fix kernel-doc warnings
Add documentation for missing parameters in PCI hotplug code.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-29 12:13:56 -07:00
Yu Zhao
654b75e044 PCI: check if bus has a proper bridge device before triggering SBR
For devices attached to the root bus, we can't trigger Secondary Bus
Reset because there is no bridge device associated with the bus. So
need to check bus->self again NULL first before using it.

Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-29 12:13:13 -07:00
Joe Perches
50e5628a4a PCI ECRC: Remove unnecessary semicolons
Acked-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-29 12:10:35 -07:00
Hidetoshi Seto
0d07348931 PCI MSI: Return if alloc_msi_entry for MSI-X failed
In current code it continues setup even if alloc_msi_entry() for MSI-X
is failed due to lack of memory.  It means arch_setup_msi_irqs() might
be called with msi_desc entries less than its argument nvec.

At least x86's arch_setup_msi_irqs() uses list_for_each_entry() for
dev->msi_list that suspected to have entries same numbers as nvec, and
it doesn't check the number of allocated vectors and passed arg nvec.
Therefore it will result in success of pci_enable_msix(), with less
vectors allocated than requested.

This patch fixes the error route to return -ENOMEM, instead of continuing
the setup (proposed by Matthew Wilcox).

Note that there is no iounmap in msi_free_irqs() if no msi_disc is
allocated.

Reviewed-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-29 12:10:10 -07:00
David Woodhouse
875764de6f intel-iommu: Simplify __intel_alloc_iova()
There's no need for the separate iommu_alloc_iova() function, and
certainly not for it to be global. Remove the underscores while we're at
it.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-29 13:39:53 +01:00
David Woodhouse
6f6a00e40a intel-iommu: Performance improvement for domain_pfn_mapping()
As with dma_pte_clear_range(), don't keep flushing a single PTE at a
time. And also micro-optimise the setting of PTE values rather than
using the helper functions to do all the masking.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-29 13:39:45 +01:00
David Woodhouse
310a5ab93c intel-iommu: Performance improvement for dma_pte_clear_range()
It's a bit silly to repeatedly call domain_flush_cache() for each PTE
individually, as we clear it. Instead, batch them up and flush a whole
range at a time. We might as well refrain from recalculating the PTE
address from scratch each time round the loop too.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-29 13:39:17 +01:00
David Woodhouse
c5395d5c4a intel-iommu: Clean up iommu_domain_identity_map()
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-29 13:39:12 +01:00
David Woodhouse
1a4a45516d intel-iommu: Remove last use of PHYSICAL_PAGE_MASK, for reserving PCI BARs
This is fairly broken anyway -- it doesn't take hotplug into account.
We should probably be checking page_is_ram() instead.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-29 13:39:05 +01:00
David Woodhouse
03d6a2461a intel-iommu: Make iommu_flush_iotlb_psi() take pfn as argument
Most of its callers are having to shift for themselves anyway, so we might
as well do it in iommu_flush_iotlb_psi().

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-29 13:38:11 +01:00
David Woodhouse
88cb6a7424 intel-iommu: Change aligned_size() to aligned_nrpages()
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-29 13:38:04 +01:00
David Woodhouse
b536d24d21 intel-iommu: Clean up intel_map_sg(), remove domain_page_mapping()
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-29 13:35:06 +01:00