Commit Graph

36 Commits

Author SHA1 Message Date
Moore, Eric
65207fedcf [SCSI] - fusion - mptfc bug fix's to prevent deadlock situations
mptbase.h

	bump version number to 3.03.09

	remove unneeded flags
	define workq and remove old fc specific locks

mptbase.c

	initialize new lock and don't initialize two removed locks

mptscsih.c

	when firmware reports target is no longer there, return
        DID_REQUEUE for fc hosts so that i/o doesn't get killed until
        the transport has an opportunity to manage the loss via its
        dev loss timer

	when the "eh_abort" routine is called, check to see if the
        driver has the command or not before looking to see if a reset
        is pending.  James Smart and I talked about this and believe
        that the API for this routine is: if driver doesn't have
        command, return SUCCESS.  This change helps prevent a target
        from being taken offline.  SUCCESS is returned because it's
        likely that the command completed after error recovery timed
        it out but before it could be aborted.

	provide a routine to queue work to newly created workq, and
        use it.

	remove "ioc" from mptscsih_abort() it was only used one time.
	the other references were via hd->ioc, so I just moved it....
	net change in references to ioc via hd->ioc is zero

	move hd->resetPending test and hd->timeouts increment to after
	the test for whether the command to be aborted remains known
	to the driver

	Make certain that the workq exists before queuing work to it.

mptfc.c

	no longer need to lock rport data structures as I was able to
	single thread the code!  I fixed up the debug code to
	eliminate compilation messages due to type mismatch in the
	printk.  Got rid of some no longer needed rport flags.
	Initialize and destroy the workq used for the rescan work.

	simplify the logic regarding the increment of
        fc_rescan_work_count.  use post increment and test for zero
        vs. pre increment and test for one; eliminate work_count
        variable: queue_work can be called with the work_lock held as
        it doesn't sleep

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-25 18:07:32 -05:00
Moore, Eric
9dec70e053 [SCSI] fusion - bump version
version bump

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:35:34 -06:00
Moore, Eric
e6b2d76a49 [SCSI] fusion - expander hotplug suport in mptsas module
This adds support for hot adding and removing
expanders, and its associated attached devices.
When there is a change in topology,
the fusion firmware sends the
MPI_EVENT_SAS_DISCOVERY event to the driver.
The driver will read firmware config pages
to determine what changes took place, and refresh
drivers view of the world stored in ioc->sas_topology.

Here is the details of the action the driver does:

(1) Expander Added :  The mptsas_discovery_work
workqueue is called.  Config pages read, and
ioc->sas_topology is refreshed.  The sas_phy_add()
is called for each phy of the expander.  The
expanders attached devices are added via
sas_rphy_add().  Added end devices are handled within
the MPT_ADD_DEVICE logic in  mptsas_hotplug_work
workqueue.

(2) Expander Delete : The sas_rphy_delete() will be
called for the top most compenent of the parent that the
expander is attached to.  The sas_rphy_delete call
will delete all the children phys, rphys, and end devices.
This is handled from mptsas_discovery_work workqueue.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:35:17 -06:00
Moore, Eric
914c2d8e59 [SCSI] fusion - removing target_id/bus_id from the VirtDevice structure
It makes no sense in keeping the target_id and bus_id
in the VirtDevice structure, when it can be obtained
from the VirtTarget structure.

In addition, this patch fix's couple compilation bugs
in mptfc.c when MPT_DEBUG_FC is enabled. This
provided by Micheal Reed.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:33:38 -06:00
Moore, Eric
c972c70fa0 [SCSI] fusion - static fix's
Patch previously provided from Adrian Bunk <bunk@stusta.de>,
moving some functions to static.  This is already in
the -mm tree.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:33:18 -06:00
Moore, Eric
3a892bef3f [SCSI] fusion - move some debug firmware event debug msgs to verbose level
Created a debug level MPT_DEBUG_VERBOSE_EVENTS.
Moving some of the more vebose debug messages
for firwmare events into new debug level.  Also
added some more firmware events descriptions.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:27:43 -06:00
James Bottomley
c92f222e1f [SCSI] mptspi: Add transport class Domain Validation
This is the first half of a patch to add the generic domain validation
to mptspi.  It also creates a secondary "virtual" channel for raid
component devices since these are now exported with no_uld_attach.

What Eric and I would have really liked is to export all physical
components on channel 0 and all raid components on channel 1.
Unfortunately, this would result in device renumbering on platforms with
mixed RAID/Physical devices which was considered unacceptable for
userland stability reasons.

Still to be done is to plug back the extra parameter setting and DV
pieces on reset and hotplug.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-01 09:44:04 -06:00
Moore, Eric
ea5a7a82f9 [SCSI] fusion - mptctl -adding asyn event notification support
Adding aen support.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:33:24 -06:00
Moore, Eric
592f9c2fc9 [SCSI] fusion - mptctl - backplane istwi fix
Moving the toolbox call from mptbase.c, over to
mptctl.c, and using the mptctl infastructure to issue
the call.  The existing code is hanging on certain HP platforms
when this ioctl is issued, and this patch fix's that.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:32:51 -06:00
Moore, Eric
928496ac31 [SCSI] fusion: increase reply frame size from 0x40 to 0x50 bytes
Increasing the reply frame size by 16 bytes, to
be in sync with the other fusion drivers.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 14:39:55 -06:00
Moore, Eric
fda4c2c8d0 [SCSI] fusion: bump version
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 14:39:42 -06:00
Michael Reed
3bc7bf1d12 [SCSI] fusion: FC rport code fixes
This fix's problems with recent fc submission regarding
i/o being redirected to the wrong target.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 14:39:41 -06:00
Moore, Eric
79de278e86 [SCSI] fusion: move sas persistent event handling over to the mptsas module
This moves code intented for SAS from
the generic mptscsih module over to the
mptsas module.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 14:39:39 -06:00
Moore, Eric
816aa907b9 [SCSI] fusion - adding raid support in mptsas
The SAS RAID volumes are reported beyond the expected number of phys.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:06 -06:00
Michael Reed
05e8ec17f4 [SCSI] mptfusion - fc transport attributes
Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:02 -06:00
Christoph Hellwig
eeb846cefd [SCSI] fusion: convert semaphores to mutexes
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:54:57 -06:00
Christoph Hellwig
9a28f49adb [SCSI] mptsas: support basic hotplug
Adds hotplug support for SAS end devices.  Unfortunately the fusion
firmware doesn't generate similar events for expanders addition/removal
so we can't support them yet.  Eric has an idea about a clever scheme to
find out about expander changes so that'll be added later on.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:54:56 -06:00
Moore, Eric Dean
f61c1c41b6 [SCSI] mptfusion - bump version
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:41:48 -07:00
Moore, Eric Dean
c7c82987b4 [SCSI] mptfusion - mapping fixs required support for transport layers.
This utilizes the hostdata area that is hung off of scsi_target and
scsi_device for saving unique firmware mapping. This will be required
for supporting new Fibre and SPI transport support.

This also fixs problems in error handling error code for SAS
controllers, in which the incorrect mapping was passed to the
firmware.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:41:15 -07:00
Moore, Eric Dean
a9b2937a1e [SCSI] mptfusion - bus_type, change SCSI to SPI
This changes to SPI for the bus_type enumeration.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:40:08 -07:00
Linus Torvalds
2741049e66 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 2005-12-02 14:32:44 -08:00
Moore, Eric Dean
2a238ea5fb [SCSI] mptfusion : dv performance fix
Syncronization for Domain Validation workqueue and the initiation of the
alternate controller.  Its possible that dv could be terminated if the
workqueue on the 1st channel doesn complete in time before the 2nd channel
begins initialization.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-01 15:59:51 -06:00
Linus Torvalds
f747307ed1 Revert "[PATCH] drivers/message/fusion/mptbase.c: make code static"
This reverts commit 252ac86553.

It impacts the LSI customers using the mptstm target mode drivers
(source tar-ball at

  ftp://ftp.lsil.com/HostAdapterDrivers/linux/Fusion-MPT/mptstm-1.00.13-src.tar.gz

for those who care).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-29 14:21:57 -08:00
Adrian Bunk
252ac86553 [PATCH] drivers/message/fusion/mptbase.c: make code static
This patch makes the following previously global and EXPORT_SYMBOL'ed
code static:
- struct mpt_proc_root_dir
- int mpt_stm_index

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:41 -08:00
Olaf Hering
733482e445 [PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reason
This patch removes almost all inclusions of linux/version.h.  The 3
#defines are unused in most of the touched files.

A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is
unfortunatly in linux/version.h.

There are also lots of #ifdef for long obsolete kernels, this was not
touched.  In a few places, the linux/version.h include was move to where
the LINUX_VERSION_CODE was used.

quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'`

search pattern:
/UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:57 -08:00
Christoph Hellwig
f9a2d2e0c8 [SCSI] mptsas: white space fixes and version bump
Various whitespace and comment fixes from Eric, aswell as a version
bump.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 19:10:34 -05:00
Christoph Hellwig
da4fa65596 [SCSI] mptsas: add support for PHY resets
Support PHY resets in mptsas.  Thanks to Eric for various bug fixes
and improvements.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 19:09:31 -05:00
Moore, Eric Dean
466544d889 [SCSI] fusion SAS support (mptsas driver) updates
Summary of Changes:
* splitting mpt_interrupt per Christophs suggestion
about a month ago
* rename ScsiCfgData to SpiCfgData structure,
then move all the raid related info into
new structure called RaidCfgData.  This is
done because SAS supports RAID, as well as SPI,
so the raid stuff should be seperate.
* incorrect timeout calculation for cntdn
inside WaitForDoorbellAck and WaitForDoortbellInt
* add support for interpreting SAS Log Info
* Increase Event Log Size from 0xA to 0x32
* Fix bug in mptsas/mptfc/mptspi - when controller
has Initiator Mode Disabled, and only running in
TargetMode, the mptctl would panic when loading.
The fix is to return 0, instead of -ENODEV, in
SCSI LLD respective probe routines
* Fix bug in mptlan.c - driver will panic if
there is host reset, due to dev being set to
zero in mpt_lan_ioc_reset
* Fix's for SPI - Echo Buffer
* Several fix's in mptscsih_io_done - FCP Response
info, RESIDUAL_MISMATCH, Data Underrun, etc.
* Cleanup Error Handling - EH handlers,
mptscsih_flush_cmds, and zeroing out ScsiLookup
from mptscsih_qcmd
* Cleanup asyn event handling from
mptscsih -> mptscsih_event_process.  Also
added support for SAS Persistent Table Full,
an asyn event

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19 12:45:38 -05:00
Christoph Hellwig
82ffb67164 [SCSI] fusion core changes for SAS support
- various bits for SAS support from the LSI driver.
 - use the device private data for the fusion target private data.
   this should be using the midlayer target data framework, but we
   can't move over to that until fusion has been switched to the
   generic DV code
 - use target ID and channel from the fusion target private data,
   because those in scsi_device will be different for mptsas

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19 12:42:31 -05:00
Christoph Hellwig
69218ee518 [SCSI] fusion: extended config header support
Acked by: Moore, Eric Dean <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:48:06 -05:00
Moore, Eric Dean
7e8a226147 [SCSI] fusion - bump driver version to 3.03.02
Bump driver version to 3.03.02

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:47:58 -05:00
Moore, Eric Dean
3fadc59d60 [SCSI] fusion - Adding pci recog support for Fibre 949X and 939X chips
* adding pci id support for new Fibre chips, 949X and 939X
* adding errata workaround - disabling PIO access except during fwdlb.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:47:53 -05:00
Moore, Eric Dean
d335cc38c7 [SCSI] mptfusion: fix panic loading driver statically compiled
Adjust link ordering in the Makefile.  Also, the ioc->DoneCtx handles
for mptspi/mptfc in the message frame.  And I'm now not seeing the
panic.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:42 -05:00
Moore, Eric Dean
7fadc87e5c [SCSI] mptfusion: mptbase cleanup, split driver support, DMA 32_BIT_MASK
(1) mptbase.c: Move registering pci ids to scsi lld drivers 
(2) mptbase.c: Use the DMA_32BIT_MASK constant
(3) mptbase.c: Fix for multiple pci domains
(4) mptbase.c: Remove le32 conversion from BlockSize, which was u8 size
(5) mptbase.c: Remove credits, -sralston references , update copyright
(6) mptbase.c: split driver support

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:17 -05:00
Pavel Machek
8d189f7298 [PATCH] fix u32 vs. pm_message_t in drivers/message
This fixes u32 vs. pm_message_t in drivers/message.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:28 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00