Pull drm fixes from Dave Airlie:
"The three nouveau fixes quiten unneeded dmesg spam that people are
seeing and pondering,
The udl fix stops it from trying to driver monitors that are too big,
where we get a black screen.
And a vmware memory alloc problem."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
drm/udl: limit modes to the sku pixel limits.
vmwgfx: corruption in vmw_event_fence_action_create()
drm/nvc0/ltcg: mask off intr 0x10
drm/nouveau: silence a debug message triggered by newer userspace
Pull USB fixes from Greg Kroah-Hartman:
"Here are two USB bugfixes for your 3.6-rc7 tree.
The OHCI fix has been reported a number of times and is a regression
from 3.5, and the patch that causes the regression was on the way to
the -stable trees before I was reminded (again) that this fix needed
to get to your tree soon.
The host controller bugfix was reported in older kernels as being
pretty easy to trigger, and has been tested by Red Hat and their
customers.
Both have been in the usb-next branch in the -next tree for a while
now, I just cherry-picked them out to get to you in time for the 3.6
release.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'usb-3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: Fix race condition when removing host controllers
USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
Also fix the calls to next_packet_size() for the pause case. This was
missed in 245baf983 ("ALSA: snd-usb: fix calls to next_packet_size").
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reported-and-tested-by: Christian Tefzer <ctrefzer@gmx.de>
Cc: stable@kernel.org
[ Taking directly because Takashi is on vacation - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ASoC update from Mark Brown:
"One small and obvious driver-specific fix.
Takashi is on vacation now so he asked me to send directly, it's a
pretty bad bug with low regression risk."
* tag 'asoc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound:
ASoC: wm2000: Correct register size
When jiffies wraps around (for example, 5 minutes after the boot, see
INITIAL_JIFFIES) and peer has just been created, now - peer->rate_last can be
< XRLIM_BURST_FACTOR * timeout, so token is not set to the maximum value, thus
some icmp packets can be unexpectedly dropped.
Fix this case by initializing last_rate to 60 seconds in the past.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit c0357e975a modified bnx2 to switch from
using ioremap/iounmap to pci_iomap/pci_iounmap. They missed a spot in the error
path of bnx2_init_one though. This patch just cleans that up.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Michael Chan <mcan@broadcom.com>
CC: "David S. Miller" <davem@davemloft.net>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull one more arm-soc bugfix from Olof Johansson:
"Here's a bugfix for orion5x. Without this, PCI doesn't initialize
properly because of too small coherent pool to cover the allocations
needed.
A similar fix has already been done on kirkwood."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: Orion5x: Fix too small coherent pool.
Pull ARM dma-mapping fix from Marek Szyprowski:
"This patch fixes a potential memory leak in the ARM dma-mapping code."
* 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
ARM: dma-mapping: Fix potential memory leak in atomic_pool_init()
Pull GPIO fix from Linus Walleij:
"A late GPIO fix: Roland Stigge found a problem in the LPC32xx driver
where a callback ignores one of its arguments. It needs to go into
stable too so sending this upstream immediately."
* tag 'gpio-fixes-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio-lpc32xx: Fix value handling of gpio_direction_output()
Pull two md bugfixes from NeilBrown:
"One (missing spinlock init) was only introduced recently. The other
has been present as long as raid10 has been supported, so is tagged
for -stable."
* tag 'md-3.6-fixes' of git://neil.brown.name/md:
md/raid10: fix "enough" function for detecting if array is failed.
md/raid5: add missing spin_lock_init.
Pull EDAC fixes from Mauro Carvalho Chehab:
"Three edac fixes at the memory enumeration logic:
- i3200_edac: Fixes a regression at the memory rank size, when the
memorias are dual-rank;
- i5000_edac: Fix a longstanding bug when calculating the memory
size: before Kernel 3.6, the memory size were right only
with one specific configuration;
- sb_edac: Fixes a bug since the initial release of the driver:
with 16GB DIMMs, there's an overflow at the memory size,
causing the number of pages per dimm (an unsigned value)
to have the highest bit equal to 1, effectively mangling
the memory size.
The third bug can potentially affect the error decoding logic as well."
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
sb_edac: Avoid overflow errors at memory size calculation
i5000: Fix the memory size calculation with 2R memories
i3200_edac: Fix memory rank size
The userspace part of UML uses the asm-offsets.h generator mechanism to
create definitions for UM_KERN_<LEVEL> that match the in-kernel
KERN_<LEVEL> constant definitions.
As of commit 04d2c8c83d ("printk: convert
the format for KERN_<LEVEL> to a 2 byte pattern"), KERN_<LEVEL> is no
longer expanded to the literal '"<LEVEL>"', but to '"\001" "LEVEL"', i.e.
it contains two parts.
However, the combo of DEFINE_STR() in
arch/x86/um/shared/sysdep/kernel-offsets.h and sed-y in Kbuild doesn't
support string literals consisting of multiple parts. Hence for all
UM_KERN_<LEVEL> definitions, only the SOH character is retained in the actual
definition, while the remainder ends up in the comment. E.g. in
include/generated/asm-offsets.h we get
#define UM_KERN_INFO "\001" /* "6" KERN_INFO */
instead of
#define UM_KERN_INFO "\001" "6" /* KERN_INFO */
This causes spurious '^A' output in some kernel messages:
Calibrating delay loop... 4640.76 BogoMIPS (lpj=23203840)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
^AChecking that host ptys support output SIGIO...Yes
^AChecking that host ptys support SIGIO on close...No, enabling workaround
^AUsing 2.6 host AIO
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource itimer
To fix this:
- Move the mapping from UM_KERN_<LEVEL> to KERN_<LEVEL> from
arch/um/include/shared/common-offsets.h to
arch/um/include/shared/user.h, which is preincluded for all userspace
parts,
- Preinclude include/linux/kern_levels.h for all userspace parts, to
obtain the in-kernel KERN_<LEVEL> constant definitions. This doesn't
violate the kernel/userspace separation, as include/linux/kern_levels.h
is self-contained and doesn't expose any other kernel internals.
- Remove the now unused STR() and DEFINE_STR() macros.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
commit c1d7e01d (ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION)
forgot UML and broke IPC on it.
Also UML has to select ARCH_WANT_IPC_PARSE_VERSION usin Kconfig.
Reported-and-tested-by: <Toralf Förster toralf.foerster@gmx.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
In case of error, the function of_phy_connect() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of error, the function genlmsg_put() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of error, the function genlmsg_put() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
If time allows, I'd appreciate if you can take the following fix
for the xt_limit match.
As Jan indicates, random things may occur while using the xt_limit
match due to use of uninitialized memory.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The ACPI spec doesn't provide for a way for the bios to pass down
recommended thresholds to the OS on a _per-bank_ basis. This patch adds
a new boot option, which if passed, tells Linux to use CMCI thresholds
set by the bios.
As fail-safe, we initialize threshold to 1 if some banks have not been
initialized by the bios and warn the user.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
This patch (as1607) fixes a race that can occur if a USB host
controller is removed while a process is reading the
/sys/kernel/debug/usb/devices file.
The usb_device_read() routine uses the bus->root_hub pointer to
determine whether or not the root hub is registered. The is not a
valid test, because the pointer is set before the root hub gets
registered and remains set even after the root hub is unregistered and
deallocated. As a result, usb_device_read() or usb_device_dump() can
access freed memory, causing an oops.
The patch changes the test to use the hcd->rh_registered flag, which
does get set and cleared at the appropriate times. It also makes sure
to hold the usb_bus_list_lock mutex while setting the flag, so that
usb_device_read() will become aware of new root hubs as soon as they
are registered.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Don Zickus <dzickus@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
we only use that to tell copy_thread() done by syscall from that
done by kernel_thread(). However, it's easier to do simply by
checking PF_KTHREAD in thread flags.
Merge sys_clone() guts for 32bit and 64bit, while we are at it...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The newly added trace command requires an external audit library.
However it can cause a build error because it's not checked whether the
libaudit is installed on system:
CC builtin-trace.o
builtin-trace.c:7:22: fatal error: libaudit.h: No such file or directory
compilation terminated.
make: *** [builtin-trace.o] Error 1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348745018-21744-1-git-send-email-namhyung@kernel.org
[ committer note: Added ", disables 'trace tool' to the feature warning msg ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Another spurious dmesg quitening.
* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
Pull the RCU adaptive-idle feature from Paul E. McKenney:
"This series adds RCU APIs that allow non-idle tasks to
enter RCU idle mode and provides x86 code to make use of them, allowing
RCU to treat user-mode execution as an extended quiescent state when the
new RCU_USER_QS kernel configuration parameter is specified. Work is
in progress to port this to a few other architectures, but is not part
of this series."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 'enough' function is written to work with 'near' arrays only
in that is implicitly assumes that the offset from one 'group' of
devices to the next is the same as the number of copies.
In reality it is the number of 'near' copies.
So change it to make this number explicit.
This bug makes it possible to run arrays without enough drives
present, which is dangerous.
It is appropriate for an -stable kernel, but will almost certainly
need to be modified for some of them.
Cc: stable@vger.kernel.org
Reported-by: Jakub Husák <jakub@gooseman.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
Some Orion5x devices allocate their coherent buffers from atomic
context. Increase size of atomic coherent pool to make sure such the
allocations won't fail during boot.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Olof Johansson <olof@lixom.net>
Initially should look loosely like the venerable 'strace' tool, but
using the infrastructure in the perf tools to allow tracing extra
targets:
[acme@sandy linux]$ perf trace --hell
Error: unknown option `hell'
usage: perf trace <PID>
-p, --pid <pid> trace events on existing process id
--tid <tid> trace events on existing thread id
--all-cpus system-wide collection from all CPUs
--cpu <cpu> list of cpus to monitor
--no-inherit child tasks do not inherit counters
--mmap-pages <n> number of mmap data pages
--uid <user> user to profile
[acme@sandy linux]$
Those should have the same semantics as when using with 'perf record'.
It gets stuck sometimes, but hey, it works sometimes too!
In time it should support perf.data based workloads, i.e. it should have
a:
-o filename
Command line option that will produce a perf.data file that can then be
used with 'perf trace' or any of the other perf tools (script, report,
etc).
It will also eventually have the set of functionalities described in the
previous 'trace' prototype by Thomas Gleixner:
"Announcing a new utility: 'trace'"
http://lwn.net/Articles/415728/
Also planned is to have some of the features suggested in the comments
of that LWN article.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PFIFO_INTR = 0x40000000 appears to be a normal case on nvc0/nve0 PFIFO,
the binary driver appears to completely ignore it in its PFIFO interrupt
handler and even masks off the bit (as we do) in PFIFO_INTR_EN at init
time.
The bits still light up in the hardware sometimes though, so lets just
ignore any bits we haven't explicitely requested.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch fixes sector_t overflow checking in dm-verity.
Without this patch, the code checks for overflow only if sector_t is
smaller than long long, not if sector_t and long long have the same size.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
The discard limits that get established for a thin-pool or thin device
may be incompatible with the pool's data device. Avoid this by checking
the discard limits of the pool's data device. If an incompatibility is
found then the pool's 'discard passdown' feature is disabled.
Change thin_io_hints to ensure that a thin device always uses the same
queue limits as its pool device.
Introduce requested_pf to track whether or not the table line originally
contained the no_discard_passdown flag and use this directly for table
output. We prepare the correct setting for discard_passdown directly in
bind_control_target (called from pool_io_hints) and store it in
adjusted_pf rather than waiting until we have access to pool->pf in
pool_preresume.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
A little thin discard code refactoring to make the next patch (dm thin:
fix discard support for data devices) more readable.
Pull out a couple of functions (and uses bools instead of unsigned for
features).
No functional changes.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Add a safety net that will re-use the DM device's existing limits in the
event that DM device has a temporary table that doesn't have any
component devices. This is to reduce the chance that requests not
respecting the hardware limits will reach the device.
DM recalculates queue limits based only on devices which currently exist
in the table. This creates a problem in the event all devices are
temporarily removed such as all paths being lost in multipath. DM will
reset the limits to the maximum permissible, which can then assemble
requests which exceed the limits of the paths when the paths are
restored. The request will fail the blk_rq_check_limits() test when
sent to a path with lower limits, and will be retried without end by
multipath. This became a much bigger issue after v3.6 commit fe86cdcef
("block: do not artificially constrain max_sectors for stacking
drivers").
Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Always clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not
have it set. Otherwise devices with predictable characteristics may
contribute entropy.
QUEUE_FLAG_ADD_RANDOM specifies whether or not queue IO timings
contribute to the random pool.
For bio-based targets this flag is always 0 because such devices have no
real queue.
For request-based devices this flag was always set to 1 by default.
Now set it according to the flags on underlying devices. If there is at
least one device which should not contribute, set the flag to zero: If a
device, such as fast SSD storage, is not suitable for supplying entropy,
a request-based queue stacked over it will not be either.
Because the checking logic is exactly same as for the rotational flag,
share the iteration function with device_is_nonrot().
Signed-off-by: Milan Broz <mbroz@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
The access beyond the end of device BUG_ON that was introduced to
dm_request_fn via commit 29e4013de7 ("dm: implement
REQ_FLUSH/FUA support for request-based dm") was an overly
drastic (but simple) response to this situation.
I have received a report that this BUG_ON was hit and now think
it would be better to use dm_kill_unmapped_request() to fail the clone
and original request with -EIO.
map_request() will assign the valid target returned by
dm_table_find_target to tio->ti. But when the target
isn't valid tio->ti is never assigned (because map_request isn't
called); so add a check for tio->ti != NULL to dm_done().
Reported-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@vger.kernel.org # v2.6.37+
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
When there are no paths and multipath receives an ioctl, it waits until
a path becomes available. This behaviour is incorrect if the
"queue_if_no_path" setting was not specified, as then the ioctl should
be rejected immediately, which this patch now does.
commit 35991652b ("dm mpath: allow ioctls to trigger pg init") should
have checked if queue_if_no_path was configured before queueing IO.
Checking for the queue_if_no_path feature, like is done in map_io(),
allows the following table load to work without blocking in the
multipath_ioctl retry loop:
echo "0 1024 multipath 0 0 0 0" | dmsetup create mpath_nodevs
Without this fix the multipath_ioctl will block with the following stack
trace:
blkid D 0000000000000002 0 23936 1 0x00000000
ffff8802b89e5cd8 0000000000000082 ffff8802b89e5fd8 0000000000012440
ffff8802b89e4010 0000000000012440 0000000000012440 0000000000012440
ffff8802b89e5fd8 0000000000012440 ffff88030c2aab30 ffff880325794040
Call Trace:
[<ffffffff814ce099>] schedule+0x29/0x70
[<ffffffff814cc312>] schedule_timeout+0x182/0x2e0
[<ffffffff8104dee0>] ? lock_timer_base+0x70/0x70
[<ffffffff814cc48e>] schedule_timeout_uninterruptible+0x1e/0x20
[<ffffffff8104f840>] msleep+0x20/0x30
[<ffffffffa0000839>] multipath_ioctl+0x109/0x170 [dm_multipath]
[<ffffffffa06bfb9c>] dm_blk_ioctl+0xbc/0xd0 [dm_mod]
[<ffffffff8122a408>] __blkdev_driver_ioctl+0x28/0x30
[<ffffffff8122a79e>] blkdev_ioctl+0xce/0x730
[<ffffffff811970ac>] block_ioctl+0x3c/0x40
[<ffffffff8117321c>] do_vfs_ioctl+0x8c/0x340
[<ffffffff81166293>] ? sys_newfstat+0x33/0x40
[<ffffffff81173571>] sys_ioctl+0xa1/0xb0
[<ffffffff814d70a9>] system_call_fastpath+0x16/0x1b
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.5+
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
The dm thin pool target claims to support the zeroing of discarded
data areas. This turns out to be incorrect when processing discards
that do not exactly cover a complete number of blocks, so the target
must always set discard_zeroes_data_unsupported.
The thin pool target will zero blocks when they are allocated if the
skip_block_zeroing feature is not specified. The block layer
may send a discard that only partly covers a block. If a thin pool
block is partially discarded then there is no guarantee that the
discarded data will get zeroed before it is accessed again.
Due to this, thin devices cannot claim discards will always zero data.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
