Commit Graph

1238 Commits

Author SHA1 Message Date
Magnus Damm
f686359e0d sh: fix sh-sci / early printk build on sh7723
This patch adds the SCSPTR register to the sh-sci driver in
the case of sh7723 to make sure early printk builds properly.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:44:32 +09:00
Paul Mundt
fd88cac905 serial: sh-sci: Fix up SH7720/SH7721 SCI build.
Missing definitions for PORT_xxx defs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:44:04 +09:00
Matthias Fuchs
0025e75357 serial: Add 16850 uart type support to OF uart driver
This patch adds support for "ns16850" as supported value
of the compatible node in flat device tree uart descriptions.

This is needed for example when you have a XR16C2850 uart
connected to a PPC405's external bus controller.

Signed-off-by: Matthias Fuchs <mfuchs@ma-fu.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16 16:15:17 +11:00
Itai Levi
1f14081d8b atmel_serial: fix flow control bug
Fix the following problem, related to hardware flow control (CTS/RTS):
Transmitting while CTS line is asserted in DMA mode, due to not checking
for tx-stopped condition.

We found these problems while testing the UARTs with hardware
flow-control.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: "Andrew Victor" <avictor.za@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 16:39:35 -08:00
Mischa Jonker
cd1e40f098 When a break signal is detected, the next character should be ignored.
This was not implemented correctly for the pnx8xxx_uart driver.

[From further discussion:
Correct, you can look to it as two separate bugs:
a) the next character is not ignored while it should;
b) the status bits 31-8 are copied to the 'ch' variable while they shouldn't.

Both bugs prevent correct break signal handling (and therefore correct
behaviour of the magic SysRq key). Bug b didn't cause too much trouble
earlier because in most situations the status bits are all zero; for
this case they unfortunately aren't.
]

Signed-off-by: Mischa Jonker <mischa.jonker@nxp.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 12:48:36 -08:00
Daniel Gagnon
7fdd4f76e9 serial: Add SupraExpress 336i PnP Voice Modem
Add SupraExpress 336i PnP Voice Modem

Tested and working with the following device: (output from lspnp -v)
01:01.00 SUP1381 (unknown)
    state = active
	io 0x2f8-0x2ff
	irq 3

Signed-off-by: Daniel Gagnon <daniel.gagnon@yahoo.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 12:48:36 -08:00
Jiri Slaby
25cf9bc1fc 8250_pci: add support for netmos 9835 IBM devices
Most of netmos 9835 hardware is handled by parport-serial.  IBM introduces
a device which doesn't have any parallel ports and have screwed subdevice
PCI id (not corresponding to port numbers).

Handle this device (9710:9835 1014:0299) properly.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 12:48:35 -08:00
Helge Deller
125c97d8a5 fix early_serial_setup() regression
Commit b430428a18 ("8250: Don't clobber
spinlocks.") introduced a regression on the parisc architecture, which
broke the handover to the serial port at boottime.

early_serial_setup() was changed to only copy a subset of the uart_port
fields, and sadly the "type" and "line" fields were forgotten and thus
the serial port was not initialized and could not be used for a
handover.  This patch fixes this by copying the missing fields.

As this change to early_serial_setup() doesn't need an initialized
spinlock in the uart_port struct any longer, we can drop the spinlock
initialization in the superio driver.

Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-13 14:03:43 -08:00
Alan Cox
21b56ec4e9 neo: Remove a bogus NULL check
Julia Lawall found an un-needed check in the neo driver. Her patch moves
the check to cover the code dereferencing it, however it cannot be NULL
anyway so remove the NULL check instead.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12 16:37:00 -08:00
Linus Torvalds
ce279e6ec9 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits)
  [ARM] fix pxa930_trkball build errors
  [ARM] fix netx
  [ARM] fix pnx4008
  [ARM] fix pxa
  [ARM] remove missed CLPS7500 defconfig
  [ARM] clps711x: fix warning in edb7211-mm.c
  [ARM] clps711x: fix warning in fortunet
  [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c
  [ARM] Fix realview build
  [ARM] 5357/1: Kirkwood: add missing ge01 tclk initialization
  [ARM] 5358/1: AT2440EVB: Use new include path of mci.h
  [ARM] 5361/1: mv78xx0: fix compilation error
  [ARM] 5360/1: Orion: fix compilation error
  [ARM] 5359/1: Kirkwood: fix compilation error
  [ARM] S3C64XX: Fix EINT group macro definition
  [ARM] Ensure CONFIG_SERIAL_SAMSUNG_UARTS is always set.
  [ARM] S3C24XX: Add gpio_to_irq implementation
  [ARM] S3C24XX: Add gpio_to_irq() facility
  [ARM] footbridge: dc21285.c warning fixes
  [ARM] footbridge: add isa_init_irq() to common header
  ...
2009-01-08 14:25:00 -08:00
Ben Dooks
2fafae3f6d [ARM] Ensure CONFIG_SERIAL_SAMSUNG_UARTS is always set.
Always set CONFIG_SERIAL_SAMSUNG_UARTS when building any
of the S3C platforms as even if the driver is not selected
there it is still the facility for the machine files to
register configuration data for the possibility of the
driver being built.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-01-08 16:24:14 +00:00
Benjamin Krill
5886188dc7 serial: Add driver for the Cell Network Processor serial port NWP device
Add support for the nwp serial device which is connected to a DCR bus. It
uses the of_serial device driver to determine necessary properties from
the device tree.  The supported device is added as serial port number 85.

NWP stands for network processor and it is part of the QPACE - Quantum
Chromodynamics Parallel Computing on the Cell Broadband Engine project.
The implementation is a lightweight uart implementation with the focus
to consume as little resources as possible and it is connected to a
DCR bus.

Signed-off-by: Benjamin Krill <ben@codiert.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-08 16:25:18 +11:00
Linus Torvalds
57c44c5f6f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
  trivial: chack -> check typo fix in main Makefile
  trivial: Add a space (and a comma) to a printk in 8250 driver
  trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx
  trivial: Fix misspelling of "firmware" in powerpc Makefile
  trivial: Fix misspelling of "firmware" in usb.c
  trivial: Fix misspelling of "firmware" in qla1280.c
  trivial: Fix misspelling of "firmware" in a100u2w.c
  trivial: Fix misspelling of "firmware" in megaraid.c
  trivial: Fix misspelling of "firmware" in ql4_mbx.c
  trivial: Fix misspelling of "firmware" in acpi_memhotplug.c
  trivial: Fix misspelling of "firmware" in ipw2100.c
  trivial: Fix misspelling of "firmware" in atmel.c
  trivial: Fix misspelled firmware in Kconfig
  trivial: fix an -> a typos in documentation and comments
  trivial: fix then -> than typos in comments and documentation
  trivial: update Jesper Juhl CREDITS entry with new email
  trivial: fix singal -> signal typo
  trivial: Fix incorrect use of "loose" in event.c
  trivial: printk: fix indentation of new_text_line declaration
  trivial: rtc-stk17ta8: fix sparse warning
  ...
2009-01-07 11:31:52 -08:00
Kay Sievers
4bfe090b0a serial: struct device - replace bus_id with dev_name(), dev_set_name()
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:37 -08:00
Paul Bolle
f1fb9bb859 trivial: Add a space (and a comma) to a printk in 8250 driver
Commit d87a6d9 ("drivers/serial/: remove CVS keywords") removed one
space too many in the printk in serial8250_init(). Put it back in (and
add a comma for clarity).

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06 11:28:09 +01:00
Frederik Schwarzer
025dfdafe7 trivial: fix then -> than typos in comments and documentation
- (better, more, bigger ...) then -> (...) than

Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06 11:28:06 +01:00
Flavio Leitner
e65f0f8271 serial_8250: support for Sealevel Systems Model 7803 COMM+8
Add support for Sealevel Systems Model 7803 COMM+8

Signed-off-by: Flavio Leitner <fleitner@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:44 -08:00
David Daney
6b06f19151 Serial: UART driver changes for Cavium OCTEON.
Cavium UART implementation is not covered by existing uart_configS.
Define a new uart_config (PORT_OCTEON) which is specified by OCTEON
platform device registration code.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:43 -08:00
David Daney
8e23fcc89c Serial: Allow port type to be specified when calling serial8250_register_port.
Add flag value UPF_FIXED_TYPE which specifies that the UART type is
known and should not be probed.  For this case the UARTs properties
are just copied out of the uart_config entry.

This allows us to keep SOC specific 8250 probe code out of 8250.c.  In
this case we know the serial hardware will not be changing as it is on
the same silicon as the CPU, and we can specify it with certainty in
the board/cpu setup code.

The alternative is to load up 8250.c with a bunch of OCTEON specific
special cases in the probing code.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:43 -08:00
David Daney
7d6a07d123 8250: Serial driver changes to support future Cavium OCTEON serial patches.
In order to use Cavium OCTEON specific serial i/o drivers, we first
patch the 8250 driver to use replaceable I/O functions.  Compatible
I/O functions are added for existing iotypeS.

An added benefit of this change is that it makes it easy to factor
some of the existing special cases out to board/SOC specific support
code.

The alternative is to load up 8250.c with a bunch of OCTEON specific
iotype code and bug work-arounds.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:43 -08:00
David Daney
b430428a18 8250: Don't clobber spinlocks.
In serial8250_isa_init_ports(), the port's lock is initialized.  We
should not overwrite it.  In early_serial_setup(), only copy in the
fields we need.  Since the early console code only uses a subset of
the fields, these are sufficient.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:42 -08:00
Alexander Beregalov
bc3256288b fix for tty-serial-move-port
Hi Alan

next-20081204 crashes with the following message:

BUG: unable to handle kernel paging request at ffff88007d320248
IP: [<ffffffff803de934>] uart_remove_one_port+0xef/0x111
                kfree(info);
     393:       49 8d 7d 10             lea    0x10(%r13),%rdi
     397:       e8 00 00 00 00          callq  39c <uart_remove_one_port+0xef>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:42 -08:00
Alan Cox
f751928e0d tty: We want the port object to be persistent
Move the tty_port and uart_info bits around a little. By embedding the uart_info
into the uart_port we get rid of lots of corner case testing and also get the
ability to go port<->state<->info which is a bit more elegant than the current
data structures.

Downsides - we allocate a tiny bit more memory for unused ports, upside we've
removed as much code as it saved for most users..

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:42 -08:00
Harvey Harrison
6ef53066ff __FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:42 -08:00
Niels de Vos
39aced68d6 serial: set correct baud_base for Oxford Semiconductor Ltd EXSYS EX-41092 Dual 16950 Serial adapter
The PCI-card identified as "Oxford Semiconductor Ltd EXSYS EX-41092 Dual
16950 Serial adapter" is only usable with other devices (i.e. not the same
card) after doing a "setserial /dev/ttyS<n> baud_base 115200".  This
baud_base should be default for this card.

Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:40 -08:00
Russell King
975a1a7d88 And here's a patch (to be applied on top of the last) which prevents
this happening again by making use of 'const'.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:37 -08:00
Russell King
9f2a036aaa Convert the oxsemi tornado special cases to use the quirk interface and not
scribble on its own reference structures.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:37 -08:00
Sonic Zhang
e482a2378f Blackfin Serial Driver: Remove BI status for known_good_char
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:35 -08:00
Sonic Zhang
68a784cb1a Blackfin Serial Driver: Fix bug - BF527-EZKIT unable to receive large files over UART in DMA mode
Add spin_lock_irqsave() when receive and transfer data.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:34 -08:00
Sonic Zhang
b6efa1eabb Blackfin Serial Driver: Clean serial console and early prink code.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:34 -08:00
Graf Yang
80d5c474b8 Blackfin Serial Driver: fix bug - SIR driver stop receiving randomly
Bug description:
The IRDA receiver may can't receiving any more after processed some signals.

To duplicate this issue is put three IRDA devices together, one blackfin,
two none blackfin, they will detect each other. Let one none blackfin devices
irdaping the blackfin devices, when it stopped print out ping information,
it is the time that blackfin stoped receiving, the time is random.

The related register bit is OK, the other devices is sending data continuously.
But no interrupt come.

Fixing:
I tried Michael's suggestion that request the UARTx error interrupt, and reset
the IRDA when found FE error. This method helps much, but it can't completely
avoid stop.

Reset the IRDA before every time sending the data is more safe.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:34 -08:00
Sonic Zhang
52e15f0eae Blackfin Serial Driver: updates kgdb over Blackfin serial driver with kgdb framework
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02 10:19:34 -08:00
Linus Torvalds
14a3c4ab0e Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...
2008-12-30 17:36:49 -08:00
Linus Torvalds
3c92ec8ae9 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits)
  powerpc/44x: Support 16K/64K base page sizes on 44x
  powerpc: Force memory size to be a multiple of PAGE_SIZE
  powerpc/32: Wire up the trampoline code for kdump
  powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M
  powerpc/32: Allow __ioremap on RAM addresses for kdump kernel
  powerpc/32: Setup OF properties for kdump
  powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs()
  powerpc: Prepare xmon_save_regs for use with kdump
  powerpc: Remove default kexec/crash_kernel ops assignments
  powerpc: Make default kexec/crash_kernel ops implicit
  powerpc: Setup OF properties for ppc32 kexec
  powerpc/pseries: Fix cpu hotplug
  powerpc: Fix KVM build on ppc440
  powerpc/cell: add QPACE as a separate Cell platform
  powerpc/cell: fix build breakage with CONFIG_SPUFS disabled
  powerpc/mpc5200: fix error paths in PSC UART probe function
  powerpc/mpc5200: add rts/cts handling in PSC UART driver
  powerpc/mpc5200: Make PSC UART driver update serial errors counters
  powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver
  powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver
  ...

Fix trivial conflict in drivers/char/Makefile as per Paul's directions
2008-12-28 16:54:33 -08:00
Paul Mundt
b0c50ad717 serial: sh-sci: Fix up port pinmux for SH7366.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:49 +09:00
Paul Mundt
1f6fd5c916 serial: sh-sci: sci_poll_get_char() is only used by CONFIG_CONSOLE_POLL.
sci_poll_put_char() happens to also be used by the serial console,
while sci_poll_get_char() is only used by CONFIG_CONSOLE_POLL. Add
another gnarly ifdef to shut up the compiler.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:46 +09:00
Paul Mundt
d5701647f1 serial: sh-sci: Generalize port pin initialization.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:43 +09:00
Paul Mundt
d830fa4584 serial: sh-sci: Tidy up fifo overrun error handling.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:43 +09:00
Paul Mundt
762c69e3ca serial: sh-sci: pr_debug() -> dev_dbg() conversion.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:43 +09:00
Paul Mundt
027e687249 serial: sh-sci: Fix up the cpufreq notifier to use the proper port clock.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:43 +09:00
Paul Mundt
07d2a1a1cd serial: sh-sci: Implement CONSOLE_POLL support and kill off old kgdb console.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Peter Griffin
2825999e8a sh: Add support for SH7201 CPU subtype.
This patch adds support for the SH-2A FPU based SH7201 processor subtype.

Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:50 +09:00
Michael Trimarchi
e7c98dc76d serial: sh-sci: Codestyle cleanup patch.
Trivial coding style cleanups.

Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:52 +09:00
Wolfram Sang
418441d9eb powerpc/mpc5200: fix error paths in PSC UART probe function
- error cases for mapbase and irq were unbundled
- mapped irq now gets disposed on error

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21 02:54:32 -07:00
Wolfram Sang
aec739e010 powerpc/mpc5200: add rts/cts handling in PSC UART driver
Add RTS/CTS-support for the PSC of the MPC5200B. Tested with a Phytec
MPC5200B-IO.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21 02:54:32 -07:00
René Bürgel
b65149880d powerpc/mpc5200: Make PSC UART driver update serial errors counters
This patch adds the capability to the mpc52xx-uart to report framing
errors, parity errors, breaks and overruns to userspace. These values
may be requested in userspace by using the ioctl TIOCGICOUNT.

Signed-off-by: René Bürgel <r.buergel@unicontrol.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21 02:54:31 -07:00
Russell King
0bd5292f58 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel 2008-12-18 22:15:48 +00:00
Russell King
fdb0a1a67e Merge branch 'next-merged' of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2008-12-18 22:15:30 +00:00
Ben Dooks
7de40c216c [ARM] S3C: Remove cpufreq warnings for unset serial information
As noted by Russell King, do not print any warnings if the
uinfo or tty fields are not set when a CPU frequency change
is sent.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18 16:35:56 +00:00
Ben Dooks
bdd4915a9f [ARM] S3C: Update CONFIG_SERIAL_SAMSUNG_UARTS handling
Fix the usage of CONFIG_SERIAL_SAMSUNG_UARTS in several places
in the kernel where it had been missed. This finishes fixing a
long standing issue where S3C2443 and S3C64XX could not use the
4th UART

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18 16:26:14 +00:00