Commit Graph

8699 Commits

Author SHA1 Message Date
Linus Torvalds
a8f43ee7e1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  sit: Add missing kfree_skb() on pskb_may_pull() failure.
  tipc: Increase buffer header to support worst-case device
2008-05-09 08:01:19 -07:00
David S. Miller
36ca34cc3b sit: Add missing kfree_skb() on pskb_may_pull() failure.
Noticed by Paul Marks <paul@pmarks.net>.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08 23:40:26 -07:00
Allan Stephens
f08269d3ec tipc: Increase buffer header to support worst-case device
This patch increases the headroom TIPC reserves in each sk_buff
to accommodate the largest possible link level device header.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08 21:38:24 -07:00
Linus Torvalds
28a4acb485 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
  net: Added ASSERT_RTNL() to dev_open() and dev_close().
  can: Fix can_send() handling on dev_queue_xmit() failures
  netns: Fix arbitrary net_device-s corruptions on net_ns stop.
  netfilter: Kconfig: default DCCP/SCTP conntrack support to the protocol config values
  netfilter: nf_conntrack_sip: restrict RTP expect flushing on error to last request
  macvlan: Fix memleak on device removal/crash on module removal
  net/ipv4: correct RFC 1122 section reference in comment
  tcp FRTO: SACK variant is errorneously used with NewReno
  e1000e: don't return half-read eeprom on error
  ucc_geth: Don't use RX clock as TX clock.
  cxgb3: Use CAP_SYS_RAWIO for firmware
  pcnet32: delete non NAPI code from driver.
  fs_enet: Fix a memory leak in fs_enet_mdio_probe
  [netdrvr] eexpress: IPv6 fails - multicast problems
  3c59x: use netstats in net_device structure
  3c980-TX needs EXTRA_PREAMBLE
  fix warning in drivers/net/appletalk/cops.c
  e1000e: Add support for BM PHYs on ICH9
  uli526x: fix endianness issues in the setup frame
  uli526x: initialize the hardware prior to requesting interrupts
  ...
2008-05-08 19:03:26 -07:00
Huang Weiyi
625fc3a375 Remove duplicated include in net/sunrpc/svc.c
<linux/sched.h> we included twice.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-08 10:58:25 -07:00
Steven Rostedt
a1f2aa1be2 fix irq flags in mac80211 code
A file in the net/mac80211 directory uses "int" for flags.  This can cause
hard to find bugs on some architectures.  This patch converts the flags to use
"long" instead.

This bug was discovered by doing an allyesconfig make on the -rt kernel where
checks are done to ensure all flags are of size sizeof(long).

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-08 10:46:55 -07:00
Ben Hutchings
e46b66bc42 net: Added ASSERT_RTNL() to dev_open() and dev_close().
dev_open() and dev_close() must be called holding the RTNL, since they
call device functions and netdevice notifiers that are promised the RTNL.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08 02:53:17 -07:00
Oliver Hartkopp
c2ab7ac225 can: Fix can_send() handling on dev_queue_xmit() failures
The tx packet counting and the local loopback of CAN frames should
only happen in the case that the CAN frame has been enqueued to the
netdevice tx queue successfully.

Thanks to Andre Naujoks <nautsch@gmail.com> for reporting this issue.

Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: Urs Thuermann <urs@isnogud.escape.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08 02:49:55 -07:00
Pavel Emelyanov
aca51397d0 netns: Fix arbitrary net_device-s corruptions on net_ns stop.
When a net namespace is destroyed, some devices (those, not killed
on ns stop explicitly) are moved back to init_net.

The problem, is that this net_ns change has one point of failure -
the __dev_alloc_name() may be called if a name collision occurs (and
this is easy to trigger). This allocator performs a likely-to-fail
GFP_ATOMIC allocation to find a suitable number. Other possible 
conditions that may cause error (for device being ns local or not
registered) are always false in this case.

So, when this call fails, the device is unregistered. But this is
*not* the right thing to do, since after this the device may be
released (and kfree-ed) improperly. E. g. bridges require more
actions (sysfs update, timer disarming, etc.), some other devices 
want to remove their private areas from lists, etc.

I. e. arbitrary use-after-free cases may occur.

The proposed fix is the following: since the only reason for the
dev_change_net_namespace to fail is the name generation, we may
give it a unique fall-back name w/o %d-s in it - the dev<ifindex>
one, since ifindexes are still unique.

So make this change, raise the failure-case printk loglevel to 
EMERG and replace the unregister_netdevice call with BUG().

[ Use snprintf() -DaveM ]

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08 01:24:25 -07:00
Patrick McHardy
f3261aff35 netfilter: Kconfig: default DCCP/SCTP conntrack support to the protocol config values
When conntrack and DCCP/SCTP protocols are enabled, chances are good
that people also want DCCP/SCTP conntrack and NAT support.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08 01:16:04 -07:00
Patrick McHardy
ef75d49f11 netfilter: nf_conntrack_sip: restrict RTP expect flushing on error to last request
Some Inovaphone PBXs exhibit very stange behaviour: when dialing for
example "123", the device sends INVITE requests for "1", "12" and
"123" back to back.  The first requests will elicit error responses
from the receiver, causing the SIP helper to flush the RTP
expectations even though we might still see a positive response.

Note the sequence number of the last INVITE request that contained a
media description and only flush the expectations when receiving a
negative response for that sequence number.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08 01:15:21 -07:00
J.H.M. Dassen (Ray)
c67fa02799 net/ipv4: correct RFC 1122 section reference in comment
RFC 1122 does not have a section 3.1.2.2. The requirement to silently
discard datagrams with a bad checksum is in section 3.2.1.2 instead.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=10611

Signed-off-by: J.H.M. Dassen (Ray) <jdassen@debian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08 01:11:04 -07:00
Ilpo Järvinen
62ab222783 tcp FRTO: SACK variant is errorneously used with NewReno
Note: there's actually another bug in FRTO's SACK variant, which
is the causing failure in NewReno case because of the error
that's fixed here. I'll fix the SACK case separately (it's
a separate bug really, though related, but in order to fix that
I need to audit tp->snd_nxt usage a bit).

There were two places where SACK variant of FRTO is getting
incorrectly used even if SACK wasn't negotiated by the TCP flow.
This leads to incorrect setting of frto_highmark with NewReno
if a previous recovery was interrupted by another RTO.

An eventual fallback to conventional recovery then incorrectly
considers one or couple of segments as forward transmissions
though they weren't, which then are not LOST marked during
fallback making them "non-retransmittable" until the next RTO.
In a bad case, those segments are really lost and are the only
one left in the window. Thus TCP needs another RTO to continue.
The next FRTO, however, could again repeat the same events
making the progress of the TCP flow extremely slow.

In order for these events to occur at all, FRTO must occur
again in FRTOs step 3 while the key segments must be lost as
well, which is not too likely in practice. It seems to most
frequently with some small devices such as network printers
that *seem* to accept TCP segments only in-order. In cases
were key segments weren't lost, things get automatically
resolved because those wrongly marked segments don't need to be
retransmitted in order to continue.

I found a reproducer after digging up relevant reports (few
reports in total, none at netdev or lkml I know of), some
cases seemed to indicate middlebox issues which seems now
to be a false assumption some people had made. Bugzilla
#10063 _might_ be related. Damon L. Chesser <damon@damtek.com>
had a reproducable case and was kind enough to tcpdump it
for me. With the tcpdump log it was quite trivial to figure
out.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-08 01:09:11 -07:00
Linus Torvalds
4880d10927 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net_cls_act: act_simple dont ignore realloc code
  iwlwifi: make IWLWIFI a tristate
  Revert "atm: Do not free already unregistered net device."
  dccp: return -EINVAL on invalid feature length
  irda: fix !PNP support for drivers/net/irda/smsc-ircc2.c
  irda: fix !PNP support in drivers/net/irda/nsc-ircc.c
  net_cls_act: Make act_simple use of netlink policy.
  ip: Use inline function dst_metric() instead of direct access to dst->metric[]
  ip: Make use of the inline function dst_metric_locked()
  atm: Bad locking on br2684_devs modifications.
  atm: Do not free already unregistered net device.
  mac80211: Do not free net device after it is unregistered.
  bridge: Consolidate error paths in br_add_bridge().
  bridge: Net device leak in br_add_bridge().
  niu: Fix probing regression for maramba on-board chips.
  lapbeth: Release ->ethdev when unregistering device.
  xfrm: convert empty xfrm_audit_* macros to functions
  net: Fix useless comment reference loop.
  sch_htb: remove from event queue in htb_parent_to_leaf()
2008-05-06 07:49:20 -07:00
Jamal Hadi Salim
9d1045ad68 net_cls_act: act_simple dont ignore realloc code
reallocation of the policy data was being ignored. It could fail.
Simplify so that there is no need for reallocating.

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-06 00:10:24 -07:00
David S. Miller
5f6b1ea41b Revert "atm: Do not free already unregistered net device."
This reverts commit 65e4113684.

Unlike the other cases Pavel fixed, this case did not
setup a netdev->destructor of free_netdev, therefore this
change was not correct.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-06 00:00:16 -07:00
Chris Wright
19443178fb dccp: return -EINVAL on invalid feature length
dccp_feat_change() validates length and on error is returning 1.
This happens to work since call chain is checking for 0 == success,
but this is returned to userspace, so make it a real error value.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05 13:50:24 -07:00
Jamal Hadi Salim
fa1b1cff3d net_cls_act: Make act_simple use of netlink policy.
Convert to netlink helpers by using netlink policy validation.
As a side effect fixes a leak.

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-05 00:22:35 -07:00
Satoru SATOH
5ffc02a158 ip: Use inline function dst_metric() instead of direct access to dst->metric[]
There are functions to refer to the value of dst->metric[THE_METRIC-1]
directly without use of a inline function "dst_metric" defined in
net/dst.h.

The following patch changes them to use the inline function
consistently.

Signed-off-by: Satoru SATOH <satoru.satoh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-04 22:14:42 -07:00
Satoru SATOH
0bbeafd011 ip: Make use of the inline function dst_metric_locked()
Signed-off-by: Satoru SATOH <satoru.satoh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-04 22:12:43 -07:00
Pavel Emelyanov
1e0ba0060f atm: Bad locking on br2684_devs modifications.
The list_del happens under read-locked devs_lock.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-04 18:00:36 -07:00
Pavel Emelyanov
65e4113684 atm: Do not free already unregistered net device.
Both br2684_push and br2684_exit do so, but unregister_netdev()
releases the device itself.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-04 18:00:05 -07:00
Pavel Emelyanov
339a7c41c9 mac80211: Do not free net device after it is unregistered.
The error path in ieee80211_register_hw() may call the unregister_netdev()
and right after it - the free_netdev(), which is wrong, since the
unregister releases the device itself.

So the proposed fix is to NULL the local->mdev after unregister is done
and check this before calling free_netdev().

I checked - no code uses the local->mdev after unregister in this error
path (but even if some did this would be a BUG).

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-04 17:59:30 -07:00
Pavel Emelyanov
e340a90e6e bridge: Consolidate error paths in br_add_bridge().
This actually had to be merged with the patch #1, but I decided not to
mix two changes in one patch.

There are already two calls to free_netdev() in there, so merge them
into one.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-04 17:58:07 -07:00
Pavel Emelyanov
c37aa90b04 bridge: Net device leak in br_add_bridge().
In case the register_netdevice() call fails the device is leaked,
since the out: label is just rtnl_unlock()+return.

Free the device.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-04 17:57:29 -07:00
Johannes Berg
c800578510 net: Fix useless comment reference loop.
include/linux/skbuff.h says:
        /* These elements must be at the end, see alloc_skb() for details.  */

net/core/skbuff.c says:
	* See comment in sk_buff definition, just before the 'tail' member

This patch contains my guess as to the actual reason rather than a
dead comment reference loop.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-03 20:56:42 -07:00
Jarek Poplawski
3ba08b00e0 sch_htb: remove from event queue in htb_parent_to_leaf()
There is lack of removing a class from the event queue while changing
from parent to leaf which can cause corruption of this rb tree. This
patch fixes a bug introduced by my patch: "sch_htb: turn intermediate
classes into leaves" commit: 160d5e10f8.

Many thanks to Jan 'yanek' Bortl for finding a way to reproduce this
rare bug and narrowing the test case, which made possible proper
diagnosing.

This patch is recommended for all kernels starting from 2.6.20.

Reported-and-tested-by: Jan 'yanek' Bortl <yanek@ya.bofh.cz>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-03 20:46:29 -07:00
Linus Torvalds
afa26be86b Merge git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
  clocksource: allow read access to available/current_clocksource
  clocksource: Fix permissions for available_clocksource
  hrtimer: remove duplicate helper function
2008-05-03 13:51:10 -07:00
Linus Torvalds
4f9faaace2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  rose: Wrong list_lock argument in rose_node seqops
  netns: Fix reassembly timer to use the right namespace
  netns: Fix device renaming for sysfs
  bnx2: Update version to 1.7.5.
  bnx2: Update RV2P firmware for 5709.
  bnx2: Zero out context memory for 5709.
  bnx2: Fix register test on 5709.
  bnx2: Fix remote PHY initial link state.
  bnx2: Refine remote PHY locking.
  bridge: forwarding table information for >256 devices
  tg3: Update version to 3.92
  tg3: Add link state reporting to UMP firmware
  tg3: Fix ethtool loopback test for 5761 BX devices
  tg3: Fix 5761 NVRAM sizes
  tg3: Use constant 500KHz MI clock on adapters with a CPMU
  hci_usb.h: fix hard-to-trigger race
  dccp: ccid2.c, ccid3.c use clamp(), clamp_t()
  net: remove NR_CPUS arrays in net/core/dev.c
  net: use get/put_unaligned_* helpers
  bluetooth: use get/put_unaligned_* helpers
  ...
2008-05-03 10:18:21 -07:00
Oliver Hartkopp
4346f65426 hrtimer: remove duplicate helper function
The helper function hrtimer_callback_running() is used in
kernel/hrtimer.c as well as in the updated net/can/bcm.c which now
supports hrtimers. Moving the helper function to hrtimer.h removes the
duplicate definition in the C-files.

Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-03 18:11:48 +02:00
Bernard Pidoux
f37f2c62a2 rose: Wrong list_lock argument in rose_node seqops
In rose_node_start() as well as in rose_node_stop() __acquires() and
spin_lock_bh() were wrongly passing rose_neigh_list_lock instead of
rose_node_list_lock arguments.

Signed-off-by: Bernard Pidoux <f6bvp@amsat.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 17:03:22 -07:00
Daniel Lezcano
4ac2ccd016 netns: Fix reassembly timer to use the right namespace
This trivial fix retrieves the network namespace from frag queue
and use it to get the network device in the right namespace.

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 17:02:03 -07:00
Daniel Lezcano
aaf8cdc34d netns: Fix device renaming for sysfs
When a netdev is moved across namespaces with the
'dev_change_net_namespace' function, the 'device_rename' function is
used to fixup kobject and refresh the sysfs tree. The device_rename
function will call kobject_rename and this one will check if there is
an object with the same name and this is the case because we are
renaming the object with the same name.

The use of 'device_rename' seems for me wrong because we usually don't
rename it but just move it across namespaces. As we just want to do a
mini "netdev_[un]register", IMO the functions
'netdev_[un]register_kobject' should be used instead, like an usual
network device [un]registering.

This patch replace device_rename by netdev_unregister_kobject,
followed by netdev_register_kobject.

The netdev_register_kobject will call device_initialize and will raise
a warning indicating the device was already initialized. In order to
fix that, I split the device initialization into a separate function
and use it together with 'netdev_register_kobject' into
register_netdevice. So we can safely call 'netdev_register_kobject' in
'dev_change_net_namespace'.

This fix will allow to properly use the sysfs per namespace which is
coming from -mm tree.

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 17:00:58 -07:00
Stephen Hemminger
ae4f8fca40 bridge: forwarding table information for >256 devices
The forwarding table binary interface (my bad choice), only exposes
the port number of the first 8 bits. The bridge code was limited to
256 ports at the time, but now the kernel supports up 1024 ports, so
the upper bits are lost when doing:

   brctl showmacs

The fix is to squeeze the extra bits into small hole left in data
structure, to maintain binary compatiablity.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:53:33 -07:00
Harvey Harrison
84994e16f2 dccp: ccid2.c, ccid3.c use clamp(), clamp_t()
Makes the intention of the nested min/max clear.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:44:07 -07:00
Mike Travis
0c0b0aca66 net: remove NR_CPUS arrays in net/core/dev.c
Remove the fixed size channels[NR_CPUS] array in net/core/dev.c and
dynamically allocate array based on nr_cpu_ids.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:43:08 -07:00
Harvey Harrison
d3e2ce3bcd net: use get/put_unaligned_* helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:26:16 -07:00
Harvey Harrison
8398531939 bluetooth: use get/put_unaligned_* helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:25:46 -07:00
Harvey Harrison
260ffeed3f irda: use get_unaligned_* helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:21:52 -07:00
Arjan van de Ven
b4192bbd85 net: Add a WARN_ON_ONCE() to the transmit timeout function
WARN_ON_ONCE() gives a stack trace including the full module list.
Having this in the kernel dump for the timeout case in the
generic netdev watchdog will help us see quicker which driver
is involved. It also allows us to collect statistics 
and patterns in terms of which drivers have this event occuring.

Suggested by Andrew Morton

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:21:07 -07:00
Ilpo Järvinen
50aab54f30 net: Add missing braces to multi-statement if()s
One finds all kinds of crazy things with some shell pipelining.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:20:10 -07:00
Denis V. Lunev
8b169240e2 netfilter: assign PDE->data before gluing PDE into /proc tree
Replace proc_net_fops_create with proc_create_data.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 04:11:52 -07:00
Denis V. Lunev
52c0e111fa netfilter: assign PDE->fops before gluing PDE into /proc tree
Replace create_proc_entry with specially created for this purpose proc_create.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 04:10:57 -07:00
Denis V. Lunev
84841c3c6c ipv4: assign PDE->data before gluing PDE into /proc tree
The check for PDE->data != NULL becomes useless after the replacement
of proc_net_fops_create with proc_create_data.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 04:10:08 -07:00
Denis V. Lunev
1d3faa390d vlan: assign PDE->data before gluing PDE into /proc tree
Simply replace proc_create and further data assigned with proc_create_data.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 04:09:11 -07:00
Denis V. Lunev
0c89652a74 atm: assign PDE->data before gluing PDE into /proc tree
Simply replace proc_create and further data assigned with proc_create_data.
proc_atm_dev_ops holds proper referrence.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 04:08:30 -07:00
Denis V. Lunev
0bb53a66fe ipv6: assign PDE->data before gluing PDE into /proc tree
Simply replace proc_create and further data assigned with proc_create_data.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 02:46:55 -07:00
Denis V. Lunev
5efdccbcda net: assign PDE->data before gluing PDE into /proc tree
Simply replace proc_create and further data assigned with proc_create_data.
Additionally, there is no need to assign NULL to PDE->data after creation,
/proc generic has already done this for us.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 02:46:22 -07:00
Denis V. Lunev
6e79d85d9a netfilter: assign PDE->data before gluing PDE into /proc tree
Simply replace proc_create and further data assigned with proc_create_data.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 02:45:42 -07:00
Denis V. Lunev
e7fe23363b sunrpc: assign PDE->data before gluing PDE into /proc tree
Simply replace proc_create and further data assigned with proc_create_data.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 02:44:36 -07:00