Commit Graph

27 Commits

Author SHA1 Message Date
Ingo Molnar
edb35028e4 Merge branches 'irq/genirq' and 'linus' into irq/core 2009-03-16 09:20:13 +01:00
Ralf Baechle
5312dc6bc0 Revert "MIPS: Print irq handler description"
This reverts commit 558d1de8ba.
2009-02-27 17:56:35 +00:00
Ingo Molnar
8f8573ae9f Merge branches 'irq/genirq', 'irq/sparseirq' and 'irq/urgent' into irq/core 2009-02-13 11:57:18 +01:00
Yinghai Lu
0b0f0b1c2c sparseirq: use kstat_irqs_cpu on non-x86 architectures too
so we could move kstat_irqs array to irq_desc struct.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12 20:01:12 +01:00
Yinghai Lu
dee4102a9a sparseirq: use kstat_irqs_cpu instead
Impact: build fix

Ingo Molnar wrote:

> tip/arch/blackfin/kernel/irqchip.c: In function 'show_interrupts':
> tip/arch/blackfin/kernel/irqchip.c:85: error: 'struct kernel_stat' has no member named 'irqs'
> make[2]: *** [arch/blackfin/kernel/irqchip.o] Error 1
> make[2]: *** Waiting for unfinished jobs....
>

So could move kstat_irqs array to irq_desc struct.

(s390, m68k, sparc) are not touched yet, because they don't support genirq

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11 15:53:13 +01:00
Manuel Lauss
558d1de8ba MIPS: Print irq handler description
Add the name set by set_irq_chip_and_handler_name() to the output of
/proc/interrupts, like so:

db1200 ~ # cat /proc/interrupts
           CPU0
  8:         52     Alchemy-IC0-hilevel   serial
 10:        171     Alchemy-IC0-hilevel   au1xxx-mmc
 11:         47     Alchemy-IC0-hilevel   Au1xxx dbdma
 18:          1     Alchemy-IC0-hilevel   au1550-spi
 29:    1250997     Alchemy-IC0-riseedge  timer
 37:        211     Alchemy-IC0-hilevel   ehci_hcd:usb1, ohci_hcd:usb2
 38:          0     Alchemy-IC0-hilevel   lcd
 72:       2623     DB1200 CPLD-level     ide0
 73:        257     DB1200 CPLD-level     eth0
 84:          1     DB1200 CPLD-level     sd_insert
 85:          0     DB1200 CPLD-level     sd_eject

ERR:          0

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:26 +00:00
Jason Wessel
8854700115 [MIPS] kgdb: add arch support for the kernel's kgdb core
The new kgdb architecture specific handler registers and unregisters
dynamically for exceptions depending on when you configure a kgdb I/O
driver.

Aside from initializing the exceptions earlier in the boot process,
kgdb should have no impact on a device when it is compiled in so long
as an I/O module is not configured for use.

There have been quite a number of contributors during the existence of
this patch (see arch/mips/kernel/kgdb.c).  Most recently Jason
re-wrote the mips kgdb logic to use the die notification handlers.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30 21:54:42 +01:00
Jason Wessel
8d60a903d9 [MIPS] kgdb: Remove existing implementation
This patch explicitly removes the kgdb implementation, for mips which
is intended to be followed by a patch that adds a kgdb implementation
for MIPS that makes use of the kgdb core in the kernel.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-30 21:54:42 +01:00
Dmitri Vorobiev
f366e2085f [MIPS] unexport {allocate,free}_irqno
The following routines

allocate_irqno()
free_irqno()

seem not to be used outside of the core kernel code, hence
exporting these functions is pointless. This patch removes
the export.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:29 +01:00
Ralf Baechle
24649c00ca MIPS: Mark all but i8259 interrupts as no-probe.
Use set_irq_noprobe() to mark all MIPS interrupts as non-probe.  Override that
default for i8259 interrupts.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-and-tested-by: Rob Landley <rob@landley.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:42 -08:00
Ralf Baechle
21a151d8ca [MIPS] checkfiles: Fix "need space after that ','" errors.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11 23:46:15 +01:00
Ralf Baechle
1146fe3050 [MIPS] SMTC: Make ack_bad_irq() safe with no IM backstop.
Issue reported and original patch by Kevin Kissel, cleaner (imho)
implementation by me.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-09-24 18:13:02 +01:00
Atsushi Nemoto
f543110da7 [MIPS] Drop __devinit tag from allocate_irqno() and free_irqno()
This fix these warnings:

WARNING: arch/mips/kernel/built-in.o - Section mismatch: reference to .init.text:free_irqno from __ksymtab_gpl between '__ksymtab_free_irqno' (at offset 0x0) and '__ksymtab_allocate_irqno'
WARNING: arch/mips/kernel/built-in.o - Section mismatch: reference to .init.text:allocate_irqno from __ksymtab_gpl after '__ksymtab_allocate_irqno' (at offset 0x8)

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-05-11 14:28:31 +01:00
Atsushi Nemoto
1ccd1c1c35 [MIPS] genirq: use name instead of typename
The "typename" field was obsoleted by the "name" field.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-06 20:16:08 +00:00
Atsushi Nemoto
187933f236 [MIPS] do_IRQ cleanup
Now we have both function and macro version of do_IRQ() and the former
is used only by DEC and non-preemptive kernel.  This patch makes
everyone use the macro version and removes the function version.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30 01:14:49 +00:00
Atsushi Nemoto
1603b5aca4 [MIPS] IRQ cleanups
This is a big irq cleanup patch.

* Use set_irq_chip() to register irq_chip.
* Initialize .mask, .unmask, .mask_ack field.  Functions for these
  method are already exist in most case.
* Do not initialize .startup, .shutdown, .enable, .disable fields if
  default routines provided by irq_chip_set_defaults() were suitable.
* Remove redundant irq_desc initializations.
* Remove unnecessary local_irq_save/local_irq_restore, spin_lock.

With this cleanup, it would be easy to switch to slightly lightwait
irq flow handlers (handle_level_irq(), etc.) instead of __do_IRQ().

Though whole this patch is quite large, changes in each irq_chip are
not quite simple.  Please review and test on your platform.  Thanks.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30 01:14:46 +00:00
Ralf Baechle
4a4cf77923 [MIPS] Make irq number allocator generally available for fixing EV64120.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-06 20:55:38 +00:00
Ralf Baechle
937a801576 [MIPS] Complete fixes after removal of pt_regs argument to int handlers.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08 02:38:28 +01:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Ralf Baechle
94dee171df [MIPS] Eleminate interrupt migration helper use.
> #define hw_interrupt_type       irq_chip
> typedef struct irq_chip         hw_irq_controller;
> #define no_irq_type             no_irq_chip
> typedef struct irq_desc         irq_desc_t;

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13 21:25:58 +01:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Ingo Molnar
d1bef4ed5f [PATCH] genirq: rename desc->handler to desc->chip
This patch-queue improves the generic IRQ layer to be truly generic, by adding
various abstractions and features to it, without impacting existing
functionality.

While the queue can be best described as "fix and improve everything in the
generic IRQ layer that we could think of", and thus it consists of many
smaller features and lots of cleanups, the one feature that stands out most is
the new 'irq chip' abstraction.

The irq-chip abstraction is about describing and coding and IRQ controller
driver by mapping its raw hardware capabilities [and quirks, if needed] in a
straightforward way, without having to think about "IRQ flow"
(level/edge/etc.) type of details.

This stands in contrast with the current 'irq-type' model of genirq
architectures, which 'mixes' raw hardware capabilities with 'flow' details.
The patchset supports both types of irq controller designs at once, and
converts i386 and x86_64 to the new irq-chip design.

As a bonus side-effect of the irq-chip approach, chained interrupt controllers
(master/slave PIC constructs, etc.) are now supported by design as well.

The end result of this patchset intends to be simpler architecture-level code
and more consolidation between architectures.

We reused many bits of code and many concepts from Russell King's ARM IRQ
layer, the merging of which was one of the motivations for this patchset.

This patch:

rename desc->handler to desc->chip.

Originally i did not want to do this, because it's a big patch.  But having
both "desc->handler", "desc->handle_irq" and "action->handler" caused a
large degree of confusion and made the code appear alot less clean than it
truly is.

I have also attempted a dual approach as well by introducing a
desc->chip alias - but that just wasnt robust enough and broke
frequently.

So lets get over with this quickly.  The conversion was done automatically
via scripts and converts all the code in the kernel.

This renaming patch is the first one amongst the patches, so that the
remaining patches can stay flexible and can be merged and split up
without having some big monolithic patch act as a merge barrier.

[akpm@osdl.org: build fix]
[akpm@osdl.org: another build fix]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 10:26:21 -07:00
Ralf Baechle
41c594ab65 [MIPS] MT: Improved multithreading support.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-19 04:14:28 +02:00
Ralf Baechle
93373ed4d8 [MIPS] Rewrite spurious_interrupt from assembler to C.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-19 04:14:18 +02:00
Andrew Morton
394e3902c5 [PATCH] more for_each_cpu() conversions
When we stop allocating percpu memory for not-possible CPUs we must not touch
the percpu data for not-possible CPUs at all.  The correct way of doing this
is to test cpu_possible() or to use for_each_cpu().

This patch is a kernel-wide sweep of all instances of NR_CPUS.  I found very
few instances of this bug, if any.  But the patch converts lots of open-coded
test to use the preferred helper macros.

Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Kyle McMartin <kyle@parisc-linux.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Christian Zankel <chris@zankel.net>
Cc: Philippe Elie <phil.el@wanadoo.fr>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Jens Axboe <axboe@suse.de>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 07:38:17 -08:00
Ralf Baechle
42a3b4f25a [PATCH] mips: nuke trailing whitespace
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:07 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00