Commit Graph

93 Commits

Author SHA1 Message Date
Linus Torvalds
84db18bbeb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: mixart: range checking proc file
  ALSA: hda - Fix a wrong array range check in patch_realtek.c
  ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_stream
  ALSA: hda - Enable amplifiers on Acer Inspire 6530G
  ASoC: Only do WM8994 bias off transition from standby
  ASoC: Don't use DCS_DATAPATH_BUSY for WM hubs devices
  ASoC: Don't do runtime wm_hubs DC servo updates if using offset correction
  ASoC: Support second DC servo readback method for wm_hubs
  ASoC: Avoid wraparound in wm_hubs DC servo correction
  ALSA: echoaudio - Eliminate use after free
  ALSA: i2c: cleanup: change parameter to pointer
  ALSA: hda - Add MSI blacklist for Aopen MZ915-M
  ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with recent ALSA PCM code
  ALSA: hda - Update document about MSI and interrupts
  ALSA: hda: Fix 0 dB offset for Lenovo Thinkpad models using AD1981
  ALSA: hda - Add missing printk argument in previous patch
  ASoC: Fix passing platform_data to ac97 bus users and fix a leak
  ALSA: hda - Fix ADC/MUX assignment of ALC269 codec
  ALSA: hda - Fix invalid bit values passed to snd_hda_codec_amp_stereo()
  ASoC: wm8994: playback => capture
2010-04-07 08:42:25 -07:00
Daniel Mack
5f712b2b73 ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_stream
This fixes a memory corruption when ASoC devices are used in
full-duplex mode. Specifically for pxa-ssp code, where this pointer
is dynamically allocated for each direction and destroyed upon each
stream start.

All other platforms are fixed blindly, I couldn't even compile-test
them. Sorry for any breakage I may have caused.

[Note that this is a backported version for 2.6.34.
 Upstream commit is fd23b7dee]

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Reported-by: Sven Neumann <s.neumann@raumfeld.com>
Reported-by: Michael Hirsch <m.hirsch@raumfeld.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-04-05 19:14:11 +01:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Chaithrika U S
e473b84742 ASoC: DaVinci: Fix stream restart error
Sometimes after a suspend-resume cycle, the ALSA application
restarts the stream when resume fails and McASP fails to work
as the clock is not enabled. This patch corrects this bug.

Testes on TI DA850/OMAP-L138 EVM.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-26 11:55:54 +00:00
Chaithrika U S
a47979b5aa ASoC: DaVinci: Update suspend/resume support for McASP driver
Add clock enable and disable calls to resume and suspend respectively.
Also add a member to the audio device data structure which tracks the clock
status.

Tested on DA850/OMAP-L138 EVM. For the purpose of testing, the patches[1] which
add suspend-to-RAM support to DA850/OMAP-L138 SoC were applied.

[1] http://linux.davincidsp.com/pipermail/davinci-linux-open-source/
2009-November/016958.html

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-04 10:49:45 +00:00
Troy Kisky
2b7b250df7 ASoC: DaVinci: use edma_pause, edma_resume
Use edma_pause and edma_resume to make missing dma_events
less likely. This may not be needed, but it looks better.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-19 10:48:27 +00:00
Troy Kisky
1e224f322b ASoC: DaVinci: pcm, fix underrun by using sram
Fix underruns by using dma to copy 1st to sram
in a ping/pong buffer style and then copying from
the sram to the ASP. This also has the advantage
of tolerating very long interrupt latency on dma
completion.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-19 10:48:08 +00:00
Troy Kisky
1587ea3157 ASoC: DaVinci: pcm, rename variables in prep for ping/pong
Rename variable master_lch to asp_channel
Rename variable slave_lch to asp_link[0]
Rename local variables:
	lch to link
	count to asp_count
	src to asp_src
	dst to asp_dst

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-19 10:47:56 +00:00
Troy Kisky
0d6c977429 ASoC: DaVinci: i2s, reduce underruns by combining into 1 element
Allow the left and right 16 bit samples to be shifted out as 1
32 bit sample.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-19 10:47:38 +00:00
Troy Kisky
57512c6432 ASoC: DaVinci: remove requirement that dma_params is 1st in structure
Remove requirement that dma_params is 1st in the structures
davinci_audio_dev and davinci_mcbsp_dev.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-18 13:35:06 +00:00
Mark Brown
907bc6c7fc Merge branch 'for-2.6.32' into for-2.6.33 2009-10-06 16:01:27 +01:00
Linus Torvalds
f0a221ef47 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (21 commits)
  ALSA: usb - Use strlcat() correctly
  ALSA: Fix invalid __exit in sound/mips/*.c
  ALSA: hda - Fix / improve ALC66x parser
  ALSA: ctxfi: Swapped SURROUND-SIDE mute
  sound: Make keywest_driver static
  ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-B1VP
  ALSA: hda - Fix digita/analog mic auto-switching with IDT codecs
  ASoC: fix kconfig order of Blackfin drivers
  ALSA: hda - Added quirk to enable sound on Toshiba NB200
  ASoC: Fix dependency of CONFIG_SND_PXA2XX_SOC_IMOTE2
  ALSA: Don't assume i2c device probing always succeeds
  ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-T350P
  ALSA: echoaudio - Re-enable the line-out control for the Mia card
  ALSA: hda - Resurrect input-source mixer of ALC268 model=acer
  ALSA: hda - Analog Devices AD1984A add HP Touchsmart model
  ALSA: hda - Add HP Pavilion dv4t-1300 to MSI whitelist
  ALSA: hda - CD-audio sound for hda-intel conexant benq laptop
  ASoC: DaVinci: Correct McASP FIFO initialization
  ASoC: Davinci: Fix race with cpu_dai->dma_data
  ASoC: DaVinci: Fix divide by zero error during 1st execution
  ...
2009-10-03 11:25:30 -07:00
Chaithrika U S
4fa9c1a595 ASoC: DaVinci: McASP FIFO related updates
The DMA params for McASP with FIFO has been updated so that it works for
various FIFO levels. A member- 'fifo_level' has been added to the DMA
params data structure. The fifo_level can be adjusted by the tx[rx]_numevt
platform data. This is relevant only for DA8xx/OMAP-L1xx platforms. This
implementation has been tested for numevt values 1, 2, 4, 8.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-30 13:43:55 +01:00
Mark Brown
2c9ee33d37 Merge branch 'for-2.6.32' into for-2.6.33 2009-09-23 10:54:06 -07:00
Chaithrika U S
539d3d8cbe ASoC: DaVinci: Correct McASP FIFO initialization
McASP write FIFO registers should be modified for playback and read FIFO
registers for capture. Check the PCM mode before manipulating the
FIFO registers. Currently, irrespective of playback/capture both the
FIFOs are enabled or disbaled. This resulted in errors in audio loopback
mode.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-23 10:37:08 -07:00
Troy Kisky
92e2a6f682 ASoC: Davinci: Fix race with cpu_dai->dma_data
This patch removes references to cpu_dai->dma_data.
It makes struct davinci_pcm_dma_params part of
struct davinci_mcbsp_dev or struct davinci_audio_dev.

It removes the unused name variable from davinci_pcm_dma_params.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-23 10:08:57 -07:00
Troy Kisky
81ac55aa14 ASoC: DaVinci: Fix divide by zero error during 1st execution
When both playback and capture stream were open
davinci_i2s_hw_params was setting parameters for
the wrong stream. The fix for davinci_i2s_hw_params
is sufficient, but it looks like a race still happens
in davici_pcm_open. This patch also makes the race smaller
but the next patch provides a better fix.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-23 10:08:56 -07:00
Linus Torvalds
fe61c99a12 Merge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: wm8753: fix mapping when MONOMIX is set to Stereo
  ASoC: some minor changes for AD1836 and AD1938 codec drivers
  ASoC: DaVinci: Fixes to McASP configuration
  ASoC: Blackfin I2S: fix resuming when device hasn't been used
  ASoC: Blackfin I2S: add lost platform_device parameter to resume function
  ASoC: fix typos in Blackfin headers
  ASoC: bf5xx-sport: the irq save/restore funcs take an unsigned long
  ASoC: Blackfin AC97: add a few missing multichannel define handling
2009-09-23 10:02:43 -07:00
Linus Torvalds
6f128fa344 Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci
* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (62 commits)
  DaVinci: DM646x - platform changes for vpif capture and display drivers
  davinci: DM355 - platform changes for vpfe capture
  davinci: DM644x platform changes for vpfe capture
  davinci: audio: move tlv320aic33 i2c setup into board files
  DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs
  DaVinci: DM365: Adding entries for DM365 IRQ's
  DaVinci: DM355: Adding PINMUX entries for DM355 Display
  davinci: Handle pinmux conflict between mmc/sd and nor flash
  davinci: Add NOR flash support for da850/omap-l138
  davinci: Add NAND flash support for DA850/OMAP-L138
  davinci: Add MMC/SD support for da850/omap-l138
  davinci: Add platform support for da850/omap-l138 GLCD
  davinci: Macro to convert GPIO signal to GPIO pin number
  davinci: Audio support for DA850/OMAP-L138 EVM
  davinci: Audio support for DA830 EVM
  davinci: Correct the number of GPIO pins for da850/omap-l138
  davinci: Configure MDIO pins for EMAC
  DaVinci: DM365: Add Support for new Revision of silicon
  DaVinci: DM365: Fix Compilation issue due to PINMUX entry
  DaVinci: EDMA: Updating default queue handling
  ...
2009-09-18 09:20:37 -07:00
Mark Brown
9f072b7b22 Merge branch 'for-2.6.32' into for-2.6.33 2009-09-18 15:09:44 +01:00
Chaithrika U S
0c31cf3e4a ASoC: DaVinci: Fixes to McASP configuration
McASP register settings are not correct for DSP mode of operation.
There is a channel swap initally. This patch provides fixes to
the register values for proper working.

Tested on DA830/OMAP-L137 EVM, DM6467 EVM.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-18 15:08:31 +01:00
Miguel Aguilar
9b95b16678 ASoC: Davinci: Add audio codec support for DM365 EVM
This patch enables tlv320aic3101 support on DM365 EVM and
it was tested on DM365 EVM rev c.

Note: this patch was created based on temp/asoc branch.

Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-15 19:31:05 +01:00
Chaithrika U S
f4890b5c04 ASoC: davinci: i2c device creation moved into board files
Also, the codec setup data structure has to remain for successful
probe.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-28 10:33:10 +01:00
Sudhakar Rajashekhara
60902a2cb1 davinci: EDMA: multiple CCs, channel mapping and API changes
- restructure to support multiple channel controllers by using
  additional struct resources for each CC

- interface changes visible to EDMA clients

  Introduce macros to build IDs from controller and channel number,
  and to extract them. Modify the edma_alloc_slot function to take an
  extra argument for the controller.

  Also update ASoC drivers to use API.  ASoC changes
  Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

- Move queue related mappings to dm<soc>.c

  EDMA in DM355 and DM644x has two transfer controllers while DM646x
  has four transfer controllers. Moving the queue to tc mapping and
  queue priority mapping to dm<soc>.c will be helpful to probe these
  mappings from platform device so that the machine_is_* testing will
  be avoided.

- add channel mapping logic

  Channel mapping logic is introduced in dm646x EDMA. This implies
  that there is no fixed association for a channel number to a
  parameter entry number. In other words, using the DMA channel
  mapping registers (DCHMAPn), a PaRAM entry can be mapped to any
  channel. While in the case of dm644x and dm355 there is a fixed
  mapping between the EDMA channel and Param entry number.

Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Reviewed-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-26 10:56:56 +03:00
Ben Dooks
aa6b904e66 ASoC: tlv320aic3x: fixup board device changes
Fixup the device changes by modifying the files that we just removed the
explicit device creation from with i2c_register_board_info() until this
can be moved into the relevant board files.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21 10:52:57 +01:00
Ben Dooks
cb3826f524 ASoC: tlv320aic3x: Change to use device model
The tlv320aic3x driver managed its own i2c device, instead of an extant
one created by the board support code. Change the code to make it so that
the driver binds to an extant (in this case i2c) device.

Add explict tlv320aic33 as well as tlv320aic3x to the supported device
table and remove the old driver bindings from the users of this code.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21 10:52:49 +01:00
Chaithrika U S
30230f4cd7 ASoC: DaVinci: Add audio support fot DA850/OMAP-L138 EVM
There is one instance of McASP on DA850/OMAP-L138 SoC. This is
connected to TLV320AIC3106 codec for audio playback and capture.
This patch adds audio support on this platform. Some of the
structure prefix names which are common for DA830/OMAP-L137 EVM and
DA850/OMAP-L138 EVM have been renamed to da8xx from da830.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13 22:19:36 +01:00
Chaithrika U S
517ee6cf69 ASoC: DaVinci: Add a DAI format to McASP driver
The patch adds a DAI format: Codec bit clock master and frame sync slave,
to the driver.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13 22:19:35 +01:00
Chaithrika U S
6a99fb5fb8 ASoC: DaVinci: McASP driver enhacements
On DA830/OMAP-L137 and DA850/OMAP-L138 SoCs, the McASP peripheral has FIFO
support. This FIFO provides additional data buffering. It also provides
tolerance to variation in host/DMA controller response times.
The read and write FIFO sizes are 256 bytes each. If FIFO is enabled,
the DMA events from McASP are sent to the FIFO which in turn sends DMA requests
to the host CPU according to the thresholds programmed.
More details of the FIFO operation can be found at
http://focus.ti.com/general/docs/lit/getliterature.tsp?literatureNumber=
sprufm1&fileType=pdf

This patch adds support for FIFO configuration. The platform data has a
version field which differentiates the McASP on different SoCs.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13 22:19:35 +01:00
Chaithrika U S
7ae5945f0c ASoC: DaVinci: Support Audio on DA830 EVM
Add support for audio on DA830 EVM- here McASP1 is interfaced to
TLV320AIC3106 codec.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-08 09:12:54 +01:00
Troy Kisky
6a90d536fe ASoC: DaVinci: pcm, constrain buffer size to multiple of period
The dma setup code assumes that the buffer size is a multiple
of the period size.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-07 11:38:29 +01:00
Troy Kisky
9bb7415056 ASoC: DaVinci: i2s: don't bounce through rtd to get dai
dai is a parameter to the functions, so use it instead of
looking it up.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-07 11:38:29 +01:00
Kevin Hilman
3e46a44739 ASoC: davinci: don't use clock names
clock name strings are no longer passed on platform_data.  Instead,
we rely entirely on struct device and clkdev to find the right clock.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-16 10:59:52 +01:00
Mark Brown
ff7d04b130 ASoC: DaVinci I2S needs mach/asp.h
Reported-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08 17:18:30 +01:00
Troy Kisky
6e5414750a ASoC: DaVinci: pcm, don't play 1st sound period twice
Update the dma link with correct data as soon as
the master channel has copied it. Otherwise, the
1st period will play twice.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-08 16:00:20 +01:00
Mark Brown
3f405b46a9 Merge branch 'davinci' into for-2.6.32
Conflicts:
	sound/soc/davinci/davinci-i2s.c
2009-07-07 19:18:46 +01:00
Troy Kisky
af0adf3e81 ASoC: DaVinci: i2s, add davinci_i2s_prepare and shutdown
If the codec is master then prepare should call
mcbsp_start, not trigger.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 13:14:35 +01:00
Troy Kisky
f5cfa954e6 ASoC: DaVinci: i2s, fix mcbsp_word_length update
Code previously just "ors" in this field without clearing
first. Fix, by never reading this register.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:08 +01:00
Troy Kisky
9333b594a0 ASoC: DaVinci: i2s, minor cleanup of davinci_i2s_startup
Save a few lines of code.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:08 +01:00
Troy Kisky
1bef449989 ASoC: DaVinci: i2s, only start sample generator if needed
Only start sample generator if needed, and more
cleanup on davinci_mcbsp_start.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:07 +01:00
Troy Kisky
eba575c30b ASoC: DaVinci: i2s cleanup
Move variable declaration closer to use.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:07 +01:00
Troy Kisky
f9af37cc63 ASoc: DaVinci: i2s, minor cleanup
Add davinci_mcbsp_dev as argument to davinci_mcbsp_start
and davinci_mcbsp_stop.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:07 +01:00
Troy Kisky
c392bec716 ASoC: DaVinci: i2s toggle clock to complete reset
Add toggle_clock function to complete i2s reset earlier.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:06 +01:00
Troy Kisky
35cf63583d ASoC: DaVinci: i2s, remove MOD_REG_BIT macro
No functional changes. Rename variable w to something
more meaningful. Remove code obfuscating macro MOD_REG_BIT.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:06 +01:00
Chaithrika U S
efd13be09e ASoC: Minor fixes to DaVinci I2S probe function
Assign proper errors when platform resource claims fail.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-08 14:55:12 +01:00
Chaithrika U S
04f80f5c48 ASoC: Add machine driver support for DM646x
This patch does the following:
(1) Add support for the DM646x machine
(2) Modifications required to introduce the platform driver model to get
platform data for all the machines including dm355 and dm644x.

Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com>
Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-07 20:23:40 +01:00
Chaithrika U S
b67f448729 ASoC: Add mcasp support for DM646x
Adds driver support for the two instances of McASP on TI's DM646x.

The multichannel audio serial port (McASP) functions as a general-purpose audio
serial port optimized for the needs of multichannel audio application.
(http://www.ti.com/litv/pdf/spruer1b).

There are two instances of McASP on DM646x. The McASP0 module includes up to 4
serializers that can be individually enabled to either transmit or receive
in different modes. The McASP1 module is limited with only 1 pinned-out
serializer that can be enabled to only transmit in DIT mode (neither receiving
in any mode nor transmitting in either Burst or TDM mode is supported).

McASP0 consists of transmit and receive sections that may operate
synchronized, or completely independently with separate master clocks, bit
clocks, and frame syncs, and using different transmit modes with different
bit-stream formats.

Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com>
Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-07 20:10:01 +01:00
Chaithrika U S
5204d49676 ASoC: Introduce platform driver model for dm644x, dm355
Introduce the platform driver model to get platform data for dm355 and dm644x.
Register platform driver and acquire the resources in the probe function Since
the platform specific code had been moved from machine driver to dm<soc>.c

Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-07 20:08:40 +01:00
David Brownell
f492ec9f02 ASoC: DaVinci EVM board support buildfixes
This is a build fix, resyncing the DaVinci EVM ASoC board code
with the version in the DaVinci tree.  That resync includes
support for the DM355 EVM, although that board isn't yet in
mainline.

(NOTE:  also includes a bugfix to the platform_add_resources
call, recently sent by Chaithrika U S <chaithrika@ti.com> but
not yet merged into the DaVinci tree.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-15 08:59:07 +01:00
David Brownell
a62114cb90 ASoC: DaVinci I2S updates
This resyncs the DaVinci I2S code with the version in the DaVinci
tree.  The behavioral change uses updated clock interfaces which
recently merged to mainline.  Two other changes include adding a
comment on the ASP/McBSP/McASP confusion, and dropping pdev->id in
order to support more boards than just the DM644x EVM.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-15 08:58:58 +01:00