Commit Graph

153 Commits

Author SHA1 Message Date
Linus Torvalds
5e152b4c9e Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits)
  PCI: Don't use dmi_name_in_vendors in quirk
  PCI: remove unused AER functions
  PCI/sysfs: move bus cpuaffinity to class dev_attrs
  PCI: add rescan to /sys/.../pci_bus/.../
  PCI: update bridge resources to get more big ranges when allocating space (again)
  KVM: Use pci_store/load_saved_state() around VM device usage
  PCI: Add interfaces to store and load the device saved state
  PCI: Track the size of each saved capability data area
  PCI/e1000e: Add and use pci_disable_link_state_locked()
  x86/PCI: derive pcibios_last_bus from ACPI MCFG
  PCI: add latency tolerance reporting enable/disable support
  PCI: add OBFF enable/disable support
  PCI: add ID-based ordering enable/disable support
  PCI hotplug: acpiphp: assume device is in state D0 after powering on a slot.
  PCI: Set PCIE maxpayload for card during hotplug insertion
  PCI/ACPI: Report _OSC control mask returned on failure to get control
  x86/PCI: irq and pci_ids patch for Intel Panther Point DeviceIDs
  PCI: handle positive error codes
  PCI: check pci_vpd_pci22_wait() return
  PCI: Use ICH6_GPIO_EN in ich6_lpc_acpi_gpio
  ...

Fix up trivial conflicts in include/linux/pci_ids.h: commit a6e5e2be44
moved the intel SMBUS ID definitons to the i2c-i801.c driver.
2011-05-23 15:39:34 -07:00
Gleb Natapov
8fa2206821 KVM: make guest mode entry to be rcu quiescent state
KVM does not hold any references to rcu protected data when it switches
CPU into a guest mode. In fact switching to a guest mode is very similar
to exiting to userspase from rcu point of view. In addition CPU may stay
in a guest mode for quite a long time (up to one time slice). Lets treat
guest mode as quiescent state, just like we do with user-mode execution.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-22 08:48:09 -04:00
Alex Williamson
f8fcfd7755 KVM: Use pci_store/load_saved_state() around VM device usage
Store the device saved state so that we can reload the device back
to the original state when it's unassigned.  This has the benefit
that the state survives across pci_reset_function() calls via
the PCI sysfs reset interface while the VM is using the device.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-21 12:17:10 -07:00
Jeff Mahoney
b42fc3cbc3 KVM: Fix off by one in kvm_for_each_vcpu iteration
This patch avoids gcc issuing the following warning when KVM_MAX_VCPUS=1:
warning: array subscript is above array bounds

kvm_for_each_vcpu currently checks to see if the index for the vcpu is
valid /after/ loading it. We don't run into problems because the address
is still inside the enclosing struct kvm and we never deference or write
to it, so this isn't a security issue.

The warning occurs when KVM_MAX_VCPUS=1 because the increment portion of
the loop will *always* cause the loop to load an invalid location since
++idx will always be > 0.

This patch moves the load so that the check occurs before the load and
we don't run into the compiler warning.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:57:09 -04:00
Avi Kivity
cef4dea07f KVM: 16-byte mmio support
Since sse instructions can issue 16-byte mmios, we need to support them.  We
can't increase the kvm_run mmio buffer size to 16 bytes without breaking
compatibility, so instead we break the large mmios into two smaller 8-byte
ones.  Since the bus is 64-bit we aren't breaking any atomicity guarantees.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:58 -04:00
Marcelo Tosatti
c761e5868e Revert "KVM: Fix race between nmi injection and enabling nmi window"
This reverts commit f86368493e.

Simpler fix to follow.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-05-11 07:56:57 -04:00
Xiao Guangrong
0ee8dcb87e KVM: cleanup memslot_id function
We can get memslot id from memslot->id directly

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:56:53 -04:00
Avi Kivity
f86368493e KVM: Fix race between nmi injection and enabling nmi window
The interrupt injection logic looks something like

  if an nmi is pending, and nmi injection allowed
    inject nmi
  if an nmi is pending
    request exit on nmi window

the problem is that "nmi is pending" can be set asynchronously by
the PIT; if it happens to fire between the two if statements, we
will request an nmi window even though nmi injection is allowed.  On
SVM, this has disasterous results, since it causes eflags.TF to be
set in random guest code.

The fix is simple; make nmi_pending synchronous using the standard
vcpu->requests mechanism; this ensures the code above is completely
synchronous wrt nmi_pending.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-03-17 13:08:30 -03:00
Rik van Riel
217ece6129 KVM: use yield_to instead of sleep in kvm_vcpu_on_spin
Instead of sleeping in kvm_vcpu_on_spin, which can cause gigantic
slowdowns of certain workloads, we instead use yield_to to get
another VCPU in the same KVM guest to run sooner.

This seems to give a 10-15% speedup in certain workloads.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-03-17 13:08:29 -03:00
Rik van Riel
34bb10b79d KVM: keep track of which task is running a KVM vcpu
Keep track of which task is running a KVM vcpu.  This helps us
figure out later what task to wake up if we want to boost a
vcpu that got preempted.

Unfortunately there are no guarantees that the same task
always keeps the same vcpu, so we can only track the task
across a single "run" of the vcpu.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-03-17 13:08:29 -03:00
Xiao Guangrong
3cba41307a KVM: make make_all_cpus_request() lockless
Now, we have 'vcpu->mode' to judge whether need to send ipi to other
cpus, this way is very exact, so checking request bit is needless,
then we can drop the spinlock let it's collateral

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-03-17 13:08:26 -03:00
Xiao Guangrong
6b7e2d0991 KVM: Add "exiting guest mode" state
Currently we keep track of only two states: guest mode and host
mode.  This patch adds an "exiting guest mode" state that tells
us that an IPI will happen soon, so unless we need to wait for the
IPI, we can avoid it completely.

Also
1: No need atomically to read/write ->mode in vcpu's thread

2: reorganize struct kvm_vcpu to make ->mode and ->requests
   in the same cache line explicitly

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-03-17 13:08:26 -03:00
Avi Kivity
5c663a1534 KVM: Fix build error on s390 due to missing tlbs_dirty
Make it available for all archs.

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:50 +02:00
Takuya Yoshikawa
d4dbf47009 KVM: MMU: Make the way of accessing lpage_info more generic
Large page information has two elements but one of them, write_count, alone
is accessed by a helper function.

This patch replaces this helper function with more generic one which returns
newly named kvm_lpage_info structure and use it to access the other element
rmap_pde.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:30:47 +02:00
Xiao Guangrong
a4ee1ca4a3 KVM: MMU: delay flush all tlbs on sync_page path
Quote from Avi:
| I don't think we need to flush immediately; set a "tlb dirty" bit somewhere
| that is cleareded when we flush the tlb.  kvm_mmu_notifier_invalidate_page()
| can consult the bit and force a flush if set.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:51 +02:00
Alexander Graf
27923eb19c KVM: PPC: Fix compile warning
KVM compilation fails with the following warning:

include/linux/kvm_host.h: In function 'kvm_irq_routing_update':
include/linux/kvm_host.h:679:2: error: 'struct kvm' has no member named 'irq_routing'

That function is only used and reasonable to have on systems that implement
an in-kernel interrupt chip. PPC doesn't.

Fix by #ifdef'ing it out when no irqchip is available.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:29:42 +02:00
Michael S. Tsirkin
bd2b53b20f KVM: fast-path msi injection with irqfd
Store irq routing table pointer in the irqfd object,
and use that to inject MSI directly without bouncing out to
a kernel thread.

While we touch this structure, rearrange irqfd fields to make fastpath
better packed for better cache utilization.

This also adds some comments about locking rules and rcu usage in code.

Some notes on the design:
- Use pointer into the rt instead of copying an entry,
  to make it possible to use rcu, thus side-stepping
  locking complexities.  We also save some memory this way.
- Old workqueue code is still used for level irqs.
  I don't think we DTRT with level anyway, however,
  it seems easier to keep the code around as
  it has been thought through and debugged, and fix level later than
  rip out and re-instate it later.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:29:38 +02:00
Jan Kiszka
1e001d49f9 KVM: Refactor IRQ names of assigned devices
Cosmetic change, but it helps to correlate IRQs with PCI devices.

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:21 +02:00
Jan Kiszka
0645211c43 KVM: Switch assigned device IRQ forwarding to threaded handler
This improves the IRQ forwarding for assigned devices: By using the
kernel's threaded IRQ scheme, we can get rid of the latency-prone work
queue and simplify the code in the same run.

Moreover, we no longer have to hold assigned_dev_lock while raising the
guest IRQ, which can be a lenghty operation as we may have to iterate
over all VCPUs. The lock is now only used for synchronizing masking vs.
unmasking of INTx-type IRQs, thus is renames to intx_lock.

Acked-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:29:20 +02:00
Jan Kiszka
d89f5eff70 KVM: Clean up vm creation and release
IA64 support forces us to abstract the allocation of the kvm structure.
But instead of mixing this up with arch-specific initialization and
doing the same on destruction, split both steps. This allows to move
generic destruction calls into generic code.

It also fixes error clean-up on failures of kvm_create_vm for IA64.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:29:09 +02:00
Takuya Yoshikawa
515a01279a KVM: pre-allocate one more dirty bitmap to avoid vmalloc()
Currently x86's kvm_vm_ioctl_get_dirty_log() needs to allocate a bitmap by
vmalloc() which will be used in the next logging and this has been causing
bad effect to VGA and live-migration: vmalloc() consumes extra systime,
triggers tlb flush, etc.

This patch resolves this issue by pre-allocating one more bitmap and switching
between two bitmaps during dirty logging.

Performance improvement:
  I measured performance for the case of VGA update by trace-cmd.
  The result was 1.5 times faster than the original one.

  In the case of live migration, the improvement ratio depends on the workload
  and the guest memory size. In general, the larger the memory size is the more
  benefits we get.

Note:
  This does not change other architectures's logic but the allocation size
  becomes twice. This will increase the actual memory consumption only when
  the new size changes the number of pages allocated by vmalloc().

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:28:46 +02:00
Marcelo Tosatti
612819c3c6 KVM: propagate fault r/w information to gup(), allow read-only memory
As suggested by Andrea, pass r/w error code to gup(), upgrading read fault
to writable if host pte allows it.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12 11:28:40 +02:00
Gleb Natapov
344d9588a9 KVM: Add PV MSR to enable asynchronous page faults delivery.
Guest enables async PF vcpu functionality using this MSR.

Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:12 +02:00
Gleb Natapov
49c7754ce5 KVM: Add memory slot versioning and use it to provide fast guest write interface
Keep track of memslots changes by keeping generation number in memslots
structure. Provide kvm_write_guest_cached() function that skips
gfn_to_hva() translation if memslots was not changed since previous
invocation.

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:23:08 +02:00
Gleb Natapov
af585b921e KVM: Halt vcpu if page it tries to access is swapped out
If a guest accesses swapped out memory do not swap it in from vcpu thread
context. Schedule work to do swapping and put vcpu into halted state
instead.

Interrupts will still be delivered to the guest and if interrupt will
cause reschedule guest will continue to run another task.

[avi: remove call to get_user_pages_noio(), nacked by Linus; this
      makes everything synchrnous again]

Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12 11:21:39 +02:00
Linus Torvalds
1765a1fe5d Merge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (321 commits)
  KVM: Drop CONFIG_DMAR dependency around kvm_iommu_map_pages
  KVM: Fix signature of kvm_iommu_map_pages stub
  KVM: MCE: Send SRAR SIGBUS directly
  KVM: MCE: Add MCG_SER_P into KVM_MCE_CAP_SUPPORTED
  KVM: fix typo in copyright notice
  KVM: Disable interrupts around get_kernel_ns()
  KVM: MMU: Avoid sign extension in mmu_alloc_direct_roots() pae root address
  KVM: MMU: move access code parsing to FNAME(walk_addr) function
  KVM: MMU: audit: check whether have unsync sps after root sync
  KVM: MMU: audit: introduce audit_printk to cleanup audit code
  KVM: MMU: audit: unregister audit tracepoints before module unloaded
  KVM: MMU: audit: fix vcpu's spte walking
  KVM: MMU: set access bit for direct mapping
  KVM: MMU: cleanup for error mask set while walk guest page table
  KVM: MMU: update 'root_hpa' out of loop in PAE shadow path
  KVM: x86 emulator: Eliminate compilation warning in x86_decode_insn()
  KVM: x86: Fix constant type in kvm_get_time_scale
  KVM: VMX: Add AX to list of registers clobbered by guest switch
  KVM guest: Move a printk that's using the clock before it's ready
  KVM: x86: TSC catchup mode
  ...
2010-10-24 12:47:25 -07:00
Jan Kiszka
d7a79b6c80 KVM: Fix signature of kvm_iommu_map_pages stub
Breaks otherwise if CONFIG_IOMMU_API is not set.

KVM-Stable-Tag.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:15 +02:00
Zachary Amsden
34c238a1d1 KVM: x86: Rename timer function
This just changes some names to better reflect the usage they
will be given.  Separated out to keep confusion to a minimum.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:53:05 +02:00
Avi Kivity
3842d135ff KVM: Check for pending events before attempting injection
Instead of blindly attempting to inject an event before each guest entry,
check for a possible event first in vcpu->requests.  Sites that can trigger
event injection are modified to set KVM_REQ_EVENT:

- interrupt, nmi window opening
- ppr updates
- i8259 output changes
- local apic irr changes
- rflags updates
- gif flag set
- event set on exit

This improves non-injecting entry performance, and sets the stage for
non-atomic injection.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:50 +02:00
Joerg Roedel
c30a358d33 KVM: MMU: Add infrastructure for two-level page walker
This patch introduces a mmu-callback to translate gpa
addresses in the walk_addr code. This is later used to
translate l2_gpa addresses into l1_gpa addresses.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:52:34 +02:00
Xiao Guangrong
365fb3fdf6 KVM: MMU: rewrite audit_mappings_page() function
There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in
atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection).

This patch fix it by:
- introduce gfn_to_pfn_atomic instead of gfn_to_pfn
- get the mapping gfn from kvm_mmu_page_get_gfn()

And it adds 'notrap' ptes check in unsync/direct sps

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24 10:51:48 +02:00
Xiao Guangrong
48987781eb KVM: MMU: introduce gfn_to_page_many_atomic() function
Introduce this function to get consecutive gfn's pages, it can reduce
gup's overload, used by later patch

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:26 +02:00
Xiao Guangrong
887c08ac19 KVM: MMU: introduce hva_to_pfn_atomic function
Introduce hva_to_pfn_atomic(), it's the fast path and can used in atomic
context, the later patch will use it

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24 10:51:26 +02:00
Arnd Bergmann
4b6a2872a2 kvm: add __rcu annotations
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:01 -07:00
Gleb Natapov
4a994358b9 KVM: Convert mask notifiers to use irqchip/pin instead of gsi
Devices register mask notifier using gsi, but irqchip knows about
irqchip/pin, so conversion from irqchip/pin to gsi should be done before
looking for mask notifier to call.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:39 +03:00
Gleb Natapov
edba23e515 KVM: Return EFAULT from kvm ioctl when guest accesses bad area
Currently if guest access address that belongs to memory slot but is not
backed up by page or page is read only KVM treats it like MMIO access.
Remove that capability. It was never part of the interface and should
not be relied upon.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:33 +03:00
Avi Kivity
e36d96f7cf KVM: Keep slot ID in memory slot structure
May be used for distinguishing between internal and user slots, or for sorting
slots in size order.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:07 +03:00
Avi Kivity
0719837c08 KVM: Reduce atomic operations on vcpu->requests
Usually the vcpu->requests bitmap is sparse, so a test_and_clear_bit() for
each request generates a large number of unneeded atomics if a bit is set.

Replace with a separate test/clear sequence.  This is safe since there is
no clear_bit() outside the vcpu thread.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:06 +03:00
Avi Kivity
a8eeb04a44 KVM: Add mini-API for vcpu->requests
Makes it a little more readable and hackable.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:05 +03:00
Avi Kivity
a1f4d39500 KVM: Remove memory alias support
As advertised in feature-removal-schedule.txt.  Equivalent support is provided
by overlapping memory regions.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:00 +03:00
Dexuan Cui
2acf923e38 KVM: VMX: Enable XSAVE/XRSTOR for guest
This patch enable guest to use XSAVE/XRSTOR instructions.

We assume that host_xcr0 would use all possible bits that OS supported.

And we loaded xcr0 in the same way we handled fpu - do it as late as we can.

Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:31 +03:00
Avi Kivity
d94e1dc9af KVM: Get rid of KVM_REQ_KICK
KVM_REQ_KICK poisons vcpu->requests by having a bit set during normal
operation.  This causes the fast path check for a clear vcpu->requests
to fail all the time, triggering tons of atomic operations.

Fix by replacing KVM_REQ_KICK with a vcpu->guest_mode atomic.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:37 +03:00
Huang Ying
bf998156d2 KVM: Avoid killing userspace through guest SRAO MCE on unmapped pages
In common cases, guest SRAO MCE will cause corresponding poisoned page
be un-mapped and SIGBUS be sent to QEMU-KVM, then QEMU-KVM will relay
the MCE to guest OS.

But it is reported that if the poisoned page is accessed in guest
after unmapping and before MCE is relayed to guest OS, userspace will
be killed.

The reason is as follows. Because poisoned page has been un-mapped,
guest access will cause guest exit and kvm_mmu_page_fault will be
called. kvm_mmu_page_fault can not get the poisoned page for fault
address, so kernel and user space MMIO processing is tried in turn. In
user MMIO processing, poisoned page is accessed again, then userspace
is killed by force_sig_info.

To fix the bug, kvm_mmu_page_fault send HWPOISON signal to QEMU-KVM
and do not try kernel and user space MMIO processing for poisoned
page.

[xiao: fix warning introduced by avi]

Reported-by: Max Asbock <masbock@linux.vnet.ibm.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:26 +03:00
Avi Kivity
0ee75bead8 KVM: Let vcpu structure alignment be determined at runtime
vmx and svm vcpus have different contents and therefore may have different
alignmment requirements.  Let each specify its required alignment.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:29 +03:00
Gui Jianfeng
2a059bf444 KVM: Get rid of dead function gva_to_page()
Nobody use gva_to_page() anymore, get rid of it.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:10 +03:00
Lai Jiangshan
90d83dc3d4 KVM: use the correct RCU API for PROVE_RCU=y
The RCU/SRCU API have already changed for proving RCU usage.

I got the following dmesg when PROVE_RCU=y because we used incorrect API.
This patch coverts rcu_deference() to srcu_dereference() or family API.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
arch/x86/kvm/mmu.c:3020 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
2 locks held by qemu-system-x86/8550:
 #0:  (&kvm->slots_lock){+.+.+.}, at: [<ffffffffa011a6ac>] kvm_set_memory_region+0x29/0x50 [kvm]
 #1:  (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa012262d>] kvm_arch_commit_memory_region+0xa6/0xe2 [kvm]

stack backtrace:
Pid: 8550, comm: qemu-system-x86 Not tainted 2.6.34-rc4-tip-01028-g939eab1 #27
Call Trace:
 [<ffffffff8106c59e>] lockdep_rcu_dereference+0xaa/0xb3
 [<ffffffffa012f6c1>] kvm_mmu_calculate_mmu_pages+0x44/0x7d [kvm]
 [<ffffffffa012263e>] kvm_arch_commit_memory_region+0xb7/0xe2 [kvm]
 [<ffffffffa011a5d7>] __kvm_set_memory_region+0x636/0x6e2 [kvm]
 [<ffffffffa011a6ba>] kvm_set_memory_region+0x37/0x50 [kvm]
 [<ffffffffa015e956>] vmx_set_tss_addr+0x46/0x5a [kvm_intel]
 [<ffffffffa0126592>] kvm_arch_vm_ioctl+0x17a/0xcf8 [kvm]
 [<ffffffff810a8692>] ? unlock_page+0x27/0x2c
 [<ffffffff810bf879>] ? __do_fault+0x3a9/0x3e1
 [<ffffffffa011b12f>] kvm_vm_ioctl+0x364/0x38d [kvm]
 [<ffffffff81060cfa>] ? up_read+0x23/0x3d
 [<ffffffff810f3587>] vfs_ioctl+0x32/0xa6
 [<ffffffff810f3b19>] do_vfs_ioctl+0x495/0x4db
 [<ffffffff810e6b2f>] ? fget_light+0xc2/0x241
 [<ffffffff810e416c>] ? do_sys_open+0x104/0x116
 [<ffffffff81382d6d>] ? retint_swapgs+0xe/0x13
 [<ffffffff810f3ba6>] sys_ioctl+0x47/0x6a
 [<ffffffff810021db>] system_call_fastpath+0x16/0x1b

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:01 +03:00
Takuya Yoshikawa
660c22c425 KVM: limit the number of pages per memory slot
This patch limits the number of pages per memory slot to make
us free from extra care about type issues.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:41 +03:00
Sridhar Samudrala
e80e2a60ff KVM: Increase NR_IOBUS_DEVS limit to 200
This patch increases the current hardcoded limit of NR_IOBUS_DEVS
from 6 to 200. We are hitting this limit when creating a guest with more
than 1 virtio-net device using vhost-net backend. Each virtio-net
device requires 2 such devices to service notifications from rx/tx queues.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-20 13:08:30 +03:00
Takuya Yoshikawa
87bf6e7de1 KVM: fix the handling of dirty bitmaps to avoid overflows
Int is not long enough to store the size of a dirty bitmap.

This patch fixes this problem with the introduction of a wrapper
function to calculate the sizes of dirty bitmaps.

Note: in mark_page_dirty(), we have to consider the fact that
  __set_bit() takes the offset as int, not long.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-04-20 13:06:55 +03:00
Avi Kivity
70e335e168 KVM: Convert kvm->requests_lock to raw_spinlock_t
The code relies on kvm->requests_lock inhibiting preemption.

Noted by Jan Kiszka.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:13 -03:00