If an attempt is made to transmit a packet that is over the device's
MTU then we log it using the datapath's name. However, it is much
more helpful to use the device name instead.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Pull ext4 bugfix from Ted Ts'o:
"This fixes the root cause of the ext4 data corruption bug which raised
a ruckus on LWN, Phoronix, and Slashdot.
This bug only showed up when non-standard mount options
(journal_async_commit and/or journal_checksum) were enabled, and when
the file system was not cleanly unmounted, but the root cause was the
inode bitmap modifications was not being properly journaled.
This could potentially lead to minor file system corruptions (pass 5
complaints with the inode allocation bitmap) after an unclean shutdown
under the wrong/unlucky workloads, but it turned into major failure if
the journal_checksum and/or jouaral_async_commit was enabled."
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix unjournaled inode bitmap modification
Pull block driver update from Jens Axboe:
"Distilled down variant, the rest will pass over to 3.8. I pulled it
into the for-linus branch I had waiting for a pull request as well, in
case you are wondering why there are new entries in here too. This
also got rid of two reverts and the ones of the mtip32xx patches that
went in later in the 3.6 cycle, so the series looks a bit cleaner."
* 'for-linus' of git://git.kernel.dk/linux-block:
loop: Make explicit loop device destruction lazy
mtip32xx:Added appropriate timeout value for secure erase
xen/blkback: Change xen_vbd's flush_support and discard_secure to have type unsigned int, rather than bool
cciss: select CONFIG_CHECK_SIGNATURE
cciss: remove unneeded memset()
xen/blkback: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
pktcdvd: update MAINTAINERS
floppy: remove dr, reuse drive on do_floppy_init
floppy: use common function to check if floppies can be registered
floppy: properly handle failure on add_disk loop
floppy: do put_disk on current dr if blk_init_queue fails
floppy: don't call alloc_ordered_workqueue inside the alloc_disk loop
xen/blkback: Fix compile warning
block: Add blk_rq_pos(rq) to sort rq when plushing
drivers/block: remove CONFIG_EXPERIMENTAL
block: remove CONFIG_EXPERIMENTAL
vfs: fix: don't increase bio_slab_max if krealloc() fails
blkcg: stop iteration early if root_rl is the only request list
blkcg: Fix use-after-free of q->root_blkg and q->root_rl.blkg
Due to the SMP nature of some of the chips, which have per CPU
registers, the driver does not use the generic irq_gc_mask_set_bit() &
irq_gc_mask_clr_bit() functions, which only support a single register.
The driver has its own implementation of these functions, which can
pick the correct register depending on the CPU being used. The
functions do however use the gc->mask_cache value.
The call to irq_setup_generic_chip() was passing
IRQ_GC_INIT_MASK_CACHE, which caused the gc->mask_cache to be
initialized to the contents of some random register. This resulted in
unexpected interrupts been delivered from random GPIO lines.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The reg property contains <base length> not <base last_offset>. Fix
the length values to be length not last_offset.
Cc: stable@vger.kernel.org
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Since there's no possible caller of dbgp_external_startup() and
dbgp_reset_prep() when !USB_EHCI_HCD, there's no point in building and
exporting these functions in that case. This eliminates a build error
under the conditions listed in the subject, introduced with the merge
f1c6872e49.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ath9k xmit functions for AMPDUs can send frames as non-aggregate in case
only one frame is currently available. The client will then answer using a
normal Ack instead of a BlockAck. This acknowledgement has no TID stored and
therefore the hardware is not able to provide us the corresponding TID.
The TID set by the hardware in the tx status descriptor has to be seen as
undefined and not as a valid TID value for normal acknowledgements. Doing
otherwise results in a massive amount of retransmissions and stalls of
connections.
Users may experience low bandwidth and complete connection stalls in
environments with transfers using multiple TIDs.
This regression was introduced in b11b160def
("ath9k: validate the TID in the tx status information").
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: stable@vger.kernel.org
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Some hardware has correct (!= 0xff) value of tssi_bounds[4] in the
EEPROM, but step is equal to 0xff. This results on ridiculous delta
calculations and completely broke TX power settings.
Reported-and-tested-by: Pavel Lucik <pavel.lucik@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
usb: fixes for v3.7-rc4
We're reverting MUSB Mode 1 DMA patch which caused many regressions. Meanwhile
Roger is cooking a better version of that patch, which will hopefully be ready
for v3.8 merge window.
We also fix an undeclared error in ux5000_remove() and another build error
when we try to build USB_MUSB_OMAP2PLUS as a module.
Backend drivers shouldn't transistion to CLOSED unless the frontend is
CLOSED. If a backend does transition to CLOSED too soon then the
frontend may not see the CLOSING state and will not properly shutdown.
So, treat an unexpected backend CLOSED state the same as CLOSING.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Backend drivers shouldn't transistion to CLOSED unless the frontend is
CLOSED. If a backend does transition to CLOSED too soon then the
frontend may not see the CLOSING state and will not properly shutdown.
So, treat an unexpected backend CLOSED state the same as CLOSING.
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
map->kmap_ops allocated in gntdev_alloc_map() wasn't freed by
gntdev_put_map().
Add a gntdev_free_map() helper function to free everything allocated
by gntdev_alloc_map().
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
TWL4030_USB & TWL6030_USB must depend on USB_MUSB_OMAP2PLUS in Kconfig else
we get build errors with
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_TWL4030_USB=y
CONFIG_TWL6030_USB=y
LD init/built-in.o
drivers/built-in.o: In function `twl4030_usb_irq':
drivers/usb/otg/twl4030-usb.c:518: undefined reference to `omap_musb_mailbox'
drivers/built-in.o: In function `twl4030_usb_phy_init':
drivers/usb/otg/twl4030-usb.c:540: undefined reference to `omap_musb_mailbox'
drivers/built-in.o: In function `twl6030_usb_irq':
drivers/usb/otg/twl6030-usb.c:230: undefined reference to `omap_musb_mailbox'
drivers/usb/otg/twl6030-usb.c:225: undefined reference to `omap_musb_mailbox'
drivers/built-in.o: In function `twl6030_usbotg_irq':
drivers/usb/otg/twl6030-usb.c:259: undefined reference to `omap_musb_mailbox'
CC: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This was found during chasing down the header output regression. The
strbuf_addf() was checking buffer length with a result of vscnprintf()
which cannot be greater than that of strbuf_avail().
Since numa topology and pmu mapping info in header were converted to use
strbuf, it sometimes caused uninteresting behaviors with the broken
strbuf.
Fix it by using vsnprintf() which returns desired output string length
regardless of the available buffer size and grow the buffer if needed.
Reported-by: Andrew Jones <drjones@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Jones <drjones@redhat.com>
Link: http://lkml.kernel.org/r/1350999890-6920-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Evalation of the WM5102 has identified a number of register values which
should be written after SYSCLK is enabled on revision A in order to
improve performance.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
When disconnect callback is called, each component should wake up
sleepers and check card->shutdown flag for avoiding the endless sleep
blocking the proper resource release.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For more strict protection for wild disconnections, a refcount is
introduced to the card instance, and let it up/down when an object is
referred via snd_lookup_*() in the open ops.
The free-after-last-close check is also changed to check this refcount
instead of the empty list, too.
Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace mutex with rwsem for codec->shutdown protection so that
concurrent accesses are allowed.
Also add the protection to snd_usb_autosuspend() and
snd_usb_autoresume(), too.
Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Close some races at disconnection of a USB audio device by adding the
chip->shutdown_mutex and chip->shutdown check at appropriate places.
The spots to put bandaids are:
- PCM prepare, hw_params and hw_free
- where the usb device is accessed for communication or get speed, in
mixer.c and others; the device speed is now cached in subs->speed
instead of accessing to chip->dev
The accesses in PCM open and close don't need the mutex protection
because these are already handled in the core PCM disconnection code.
The autosuspend/autoresume codes are still uncovered by this patch
because of possible mutex deadlocks. They'll be covered by the
upcoming change to rwsem.
Also the mixer codes are untouched, too. These will be fixed in
another patch, too.
Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix races at PCM disconnection:
- while a PCM device is being opened or closed
- while the PCM state is being changed without lock in prepare,
hw_params, hw_free ops
Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some CE4100 devices such as the:
- DFX module (01:0b.7)
- entertainment encryption device (01:10.0)
- multimedia controller (01:12.0)
do not have a device interrupt at all.
This patch fixes the PCI controller code to declare the missing
PCI configuration register space, as well as a fixup method for
forcing the interrupt pin to be 0 for these devices. This is
required to ensure that pci drivers matching on these devices
will be able to honor the various PCI subsystem calls touching
the configuration space.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: rui.zhang@intel.com
Cc: alan@linux.intel.com
Link: http://lkml.kernel.org/r/1351518020-25556-4-git-send-email-ffainelli@freebox.fr
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The CE4100 platform is currently missing a proper pm_poweroff
implementation leading to poweroff making the CPU spin forever
and the CE4100 platform does not enter a low-power mode where
the external Power Management Unit can properly power off the
system. Power off on this platform is implemented pretty much
like reboot, by writing to the SoC built-in 8051 microcontroller
mapped at I/O port 0xcf9, the value 0x4.
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: rui.zhang@intel.com
Cc: alan@linux.intel.com
Link: http://lkml.kernel.org/r/1351518020-25556-2-git-send-email-ffainelli@freebox.fr
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I've been trying to get hardware breakpoints with perf to work
on POWER7 but I'm getting the following:
% perf record -e mem:0x10000000 true
Error: sys_perf_event_open() syscall returned with 28 (No space left on device). /bin/dmesg may provide additional information.
Fatal: No CONFIG_PERF_EVENTS=y kernel support configured?
true: Terminated
(FWIW adding -a and it works fine)
Debugging it seems that __reserve_bp_slot() is returning ENOSPC
because it thinks there are no free breakpoint slots on this
CPU.
I have a 2 CPUs, so perf userspace is doing two perf_event_open
syscalls to add a counter to each CPU [1]. The first syscall
succeeds but the second is failing.
On this second syscall, fetch_bp_busy_slots() sets slots.pinned
to be 1, despite there being no breakpoint on this CPU. This is
because the call the task_bp_pinned, checks all CPUs, rather
than just the current CPU. POWER7 only has one hardware
breakpoint per CPU (ie. HBP_NUM=1), so we return ENOSPC.
The following patch fixes this by checking the associated CPU
for each breakpoint in task_bp_pinned. I'm not familiar with
this code, so it's provided as a reference to the above issue.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Jovi Zhang <bookjovi@gmail.com>
Cc: K Prasad <prasad@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1351268936-2956-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
xfstests has always had random failures of tests due to loop devices
failing to be torn down and hence leaving filesytems that cannot be
unmounted. This causes test runs to immediately stop.
Over the past 6 or 7 years we've added hacks like explicit unmount
-d commands for loop mounts, losetup -d after unmount -d fails, etc,
but still the problems persist. Recently, the frequency of loop
related failures increased again to the point that xfstests 259 will
reliably fail with a stray loop device that was not torn down.
That is despite the fact the test is above as simple as it gets -
loop 5 or 6 times running mkfs.xfs with different paramters:
lofile=$(losetup -f)
losetup $lofile "$testfile"
"$MKFS_XFS_PROG" -b size=512 $lofile >/dev/null || echo "mkfs failed!"
sync
losetup -d $lofile
And losteup -d $lofile is failing with EBUSY on 1-3 of these loops
every time the test is run.
Turns out that blkid is running simultaneously with losetup -d, and
so it sees an elevated reference count and returns EBUSY. But why
is blkid running? It's obvious, isn't it? udev has decided to try
and find out what is on the block device as a result of a creation
notification. And it is racing with mkfs, so might still be scanning
the device when mkfs finishes and we try to tear it down.
So, make losetup -d force autoremove behaviour. That is, when the
last reference goes away, tear down the device. xfstests wants it
*gone*, not causing random teardown failures when we know that all
the operations the tests have specifically run on the device have
completed and are no longer referencing the loop device.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Added appropriate timeout value for secure erase based on identify device data
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Changing the type of bdev parameters to be unsigned int :1, rather than bool.
This is more consistent with the types of other features in the block drivers.
Signed-off-by: Oliver Chick <oliver.chick@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Peter is not going to maintain the driver any more. I have the
hardware.
Acked-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is a small cleanup, that also may turn error handling of
unitialized disks more readable. We don't need a separate variable to
track allocated disks, remove dr and reuse drive variable instead.
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The same checks to see if a drive can be or is registered are
repeated through the code, factor out the checks in a common function
and replace the repeated checks with it.
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On floppy initialization, if something failed inside the loop we call
add_disk, there was no cleanup of previous iterations in the error
handling.
Cc: stable@vger.kernel.org
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 070ad7e ("floppy: convert to delayed work and single-thread
wq"), we end up calling alloc_ordered_workqueue multiple times inside
the loop, which shouldn't be intended. Besides the leak, other side
effect in the current code is if blk_init_queue fails, we would end up
calling unregister_blkdev even if we didn't call yet register_blkdev.
Just moved the allocation of floppy_wq before the loop, and adjusted the
code accordingly.
Cc: stable@vger.kernel.org # 3.5+
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
drivers/block/xen-blkback/xenbus.c:260:5: warning: symbol 'xenvbd_sysfs_addif' was not declared. Should it be static?
drivers/block/xen-blkback/xenbus.c:284:6: warning: symbol 'xenvbd_sysfs_delif' was not declared. Should it be static?
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This adds a "select" dependency of KEYBOARD_LPC32XX on INPUT_MATRIXKMAP,
as the other drivers are doing in this regard. This fixes the following
compile error if KEYBOARD_LPC32XX is enabled but INPUT_MATRIXKMAP is not:
drivers/input/keyboard/lpc32xx-keys.c:230: undefined reference to
`matrix_keypad_build_keymap'
Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
