Commit Graph

149 Commits

Author SHA1 Message Date
Linus Torvalds
db5e53fbf0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slub: avoid leaking caches or refcounts on sysfs error
  slab: Fix comment on #endif
  slab: remove GFP_THISNODE clearing from alloc_slabmgmt()
  slub: Add might_sleep_if() to slab_alloc()
  SLUB: failslab support
  slub: Fix incorrect use of loose
  slab: Update the kmem_cache_create documentation regarding the name parameter
  slub: make early_kmem_cache_node_alloc void
  slab: unsigned slabp->inuse cannot be less than 0
  slub - fix get_object_page comment
  SLUB: Replace __builtin_return_address(0) with _RET_IP_.
  SLUB: cleanup - define macros instead of hardcoded numbers
2008-12-30 17:28:09 -08:00
Akinobu Mita
773ff60e84 SLUB: failslab support
Currently fault-injection capability for SLAB allocator is only
available to SLAB. This patch makes it available to SLUB, too.

[penberg@cs.helsinki.fi: unify slab and slub implementations]
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-12-29 11:27:46 +02:00
Ingo Molnar
6638101c11 Merge branches 'core/debugobjects', 'core/iommu', 'core/locking', 'core/printk', 'core/rcu', 'core/resources', 'core/softirq' and 'core/stacktrace' into core/core 2008-12-25 14:06:29 +01:00
Paul E. McKenney
64db4cfff9 "Tree RCU": scalable classic RCU implementation
This patch fixes a long-standing performance bug in classic RCU that
results in massive internal-to-RCU lock contention on systems with
more than a few hundred CPUs.  Although this patch creates a separate
flavor of RCU for ease of review and patch maintenance, it is intended
to replace classic RCU.

This patch still handles stress better than does mainline, so I am still
calling it ready for inclusion.  This patch is against the -tip tree.
Nevertheless, experience on an actual 1000+ CPU machine would still be
most welcome.

Most of the changes noted below were found while creating an rcutiny
(which should permit ejecting the current rcuclassic) and while doing
detailed line-by-line documentation.

Updates from v9 (http://lkml.org/lkml/2008/12/2/334):

o	Fixes from remainder of line-by-line code walkthrough,
	including comment spelling, initialization, undesirable
	narrowing due to type conversion, removing redundant memory
	barriers, removing redundant local-variable initialization,
	and removing redundant local variables.

	I do not believe that any of these fixes address the CPU-hotplug
	issues that Andi Kleen was seeing, but please do give it a whirl
	in case the machine is smarter than I am.

	A writeup from the walkthrough may be found at the following
	URL, in case you are suffering from terminal insomnia or
	masochism:

	http://www.kernel.org/pub/linux/kernel/people/paulmck/tmp/rcutree-walkthrough.2008.12.16a.pdf

o	Made rcutree tracing use seq_file, as suggested some time
	ago by Lai Jiangshan.

o	Added a .csv variant of the rcudata debugfs trace file, to allow
	people having thousands of CPUs to drop the data into
	a spreadsheet.	Tested with oocalc and gnumeric.  Updated
	documentation to suit.

Updates from v8 (http://lkml.org/lkml/2008/11/15/139):

o	Fix a theoretical race between grace-period initialization and
	force_quiescent_state() that could occur if more than three
	jiffies were required to carry out the grace-period
	initialization.  Which it might, if you had enough CPUs.

o	Apply Ingo's printk-standardization patch.

o	Substitute local variables for repeated accesses to global
	variables.

o	Fix comment misspellings and redundant (but harmless) increments
	of ->n_rcu_pending (this latter after having explicitly added it).

o	Apply checkpatch fixes.

Updates from v7 (http://lkml.org/lkml/2008/10/10/291):

o	Fixed a number of problems noted by Gautham Shenoy, including
	the cpu-stall-detection bug that he was having difficulty
	convincing me was real.  ;-)

o	Changed cpu-stall detection to wait for ten seconds rather than
	three in order to reduce false positive, as suggested by Ingo
	Molnar.

o	Produced a design document (http://lwn.net/Articles/305782/).
	The act of writing this document uncovered a number of both
	theoretical and "here and now" bugs as noted below.

o	Fix dynticks_nesting accounting confusion, simplify WARN_ON()
	condition, fix kerneldoc comments, and add memory barriers
	in dynticks interface functions.

o	Add more data to tracing.

o	Remove unused "rcu_barrier" field from rcu_data structure.

o	Count calls to rcu_pending() from scheduling-clock interrupt
	to use as a surrogate timebase should jiffies stop counting.

o	Fix a theoretical race between force_quiescent_state() and
	grace-period initialization.  Yes, initialization does have to
	go on for some jiffies for this race to occur, but given enough
	CPUs...

Updates from v6 (http://lkml.org/lkml/2008/9/23/448):

o	Fix a number of checkpatch.pl complaints.

o	Apply review comments from Ingo Molnar and Lai Jiangshan
	on the stall-detection code.

o	Fix several bugs in !CONFIG_SMP builds.

o	Fix a misspelled config-parameter name so that RCU now announces
	at boot time if stall detection is configured.

o	Run tests on numerous combinations of configurations parameters,
	which after the fixes above, now build and run correctly.

Updates from v5 (http://lkml.org/lkml/2008/9/15/92, bad subject line):

o	Fix a compiler error in the !CONFIG_FANOUT_EXACT case (blew a
	changeset some time ago, and finally got around to retesting
	this option).

o	Fix some tracing bugs in rcupreempt that caused incorrect
	totals to be printed.

o	I now test with a more brutal random-selection online/offline
	script (attached).  Probably more brutal than it needs to be
	on the people reading it as well, but so it goes.

o	A number of optimizations and usability improvements:

	o	Make rcu_pending() ignore the grace-period timeout when
		there is no grace period in progress.

	o	Make force_quiescent_state() avoid going for a global
		lock in the case where there is no grace period in
		progress.

	o	Rearrange struct fields to improve struct layout.

	o	Make call_rcu() initiate a grace period if RCU was
		idle, rather than waiting for the next scheduling
		clock interrupt.

	o	Invoke rcu_irq_enter() and rcu_irq_exit() only when
		idle, as suggested by Andi Kleen.  I still don't
		completely trust this change, and might back it out.

	o	Make CONFIG_RCU_TRACE be the single config variable
		manipulated for all forms of RCU, instead of the prior
		confusion.

	o	Document tracing files and formats for both rcupreempt
		and rcutree.

Updates from v4 for those missing v5 given its bad subject line:

o	Separated dynticks interface so that NMIs and irqs call separate
	functions, greatly simplifying it.  In particular, this code
	no longer requires a proof of correctness.  ;-)

o	Separated dynticks state out into its own per-CPU structure,
	avoiding the duplicated accounting.

o	The case where a dynticks-idle CPU runs an irq handler that
	invokes call_rcu() is now correctly handled, forcing that CPU
	out of dynticks-idle mode.

o	Review comments have been applied (thank you all!!!).
	For but one example, fixed the dynticks-ordering issue that
	Manfred pointed out, saving me much debugging.  ;-)

o	Adjusted rcuclassic and rcupreempt to handle dynticks changes.

Attached is an updated patch to Classic RCU that applies a hierarchy,
greatly reducing the contention on the top-level lock for large machines.
This passes 10-hour concurrent rcutorture and online-offline testing on
128-CPU ppc64 without dynticks enabled, and exposes some timekeeping
bugs in presence of dynticks (exciting working on a system where
"sleep 1" hangs until interrupted...), which were fixed in the
2.6.27 kernel.  It is getting more reliable than mainline by some
measures, so the next version will be against -tip for inclusion.
See also Manfred Spraul's recent patches (or his earlier work from
2004 at http://marc.info/?l=linux-kernel&m=108546384711797&w=2).
We will converge onto a common patch in the fullness of time, but are
currently exploring different regions of the design space.  That said,
I have already gratefully stolen quite a few of Manfred's ideas.

This patch provides CONFIG_RCU_FANOUT, which controls the bushiness
of the RCU hierarchy.  Defaults to 32 on 32-bit machines and 64 on
64-bit machines.  If CONFIG_NR_CPUS is less than CONFIG_RCU_FANOUT,
there is no hierarchy.  By default, the RCU initialization code will
adjust CONFIG_RCU_FANOUT to balance the hierarchy, so strongly NUMA
architectures may choose to set CONFIG_RCU_FANOUT_EXACT to disable
this balancing, allowing the hierarchy to be exactly aligned to the
underlying hardware.  Up to two levels of hierarchy are permitted
(in addition to the root node), allowing up to 16,384 CPUs on 32-bit
systems and up to 262,144 CPUs on 64-bit systems.  I just know that I
am going to regret saying this, but this seems more than sufficient
for the foreseeable future.  (Some architectures might wish to set
CONFIG_RCU_FANOUT=4, which would limit such architectures to 64 CPUs.
If this becomes a real problem, additional levels can be added, but I
doubt that it will make a significant difference on real hardware.)

In the common case, a given CPU will manipulate its private rcu_data
structure and the rcu_node structure that it shares with its immediate
neighbors.  This can reduce both lock and memory contention by multiple
orders of magnitude, which should eliminate the need for the strange
manipulations that are reported to be required when running Linux on
very large systems.

Some shortcomings:

o	More bugs will probably surface as a result of an ongoing
	line-by-line code inspection.

	Patches will be provided as required.

o	There are probably hangs, rcutorture failures, &c.  Seems
	quite stable on a 128-CPU machine, but that is kind of small
	compared to 4096 CPUs.  However, seems to do better than
	mainline.

	Patches will be provided as required.

o	The memory footprint of this version is several KB larger
	than rcuclassic.

	A separate UP-only rcutiny patch will be provided, which will
	reduce the memory footprint significantly, even compared
	to the old rcuclassic.  One such patch passes light testing,
	and has a memory footprint smaller even than rcuclassic.
	Initial reaction from various embedded guys was "it is not
	worth it", so am putting it aside.

Credits:

o	Manfred Spraul for ideas, review comments, and bugs spotted,
	as well as some good friendly competition.  ;-)

o	Josh Triplett, Ingo Molnar, Peter Zijlstra, Mathieu Desnoyers,
	Lai Jiangshan, Andi Kleen, Andy Whitcroft, and Andrew Morton
	for reviews and comments.

o	Thomas Gleixner for much-needed help with some timer issues
	(see patches below).

o	Jon M. Tollefson, Tim Pepper, Andrew Theurer, Jose R. Santos,
	Andy Whitcroft, Darrick Wong, Nishanth Aravamudan, Anton
	Blanchard, Dave Kleikamp, and Nathan Lynch for keeping machines
	alive despite my heavy abuse^Wtesting.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18 21:56:04 +01:00
Ingo Molnar
3ae7020543 debugobjects: add boot parameter default value
Impact: add .config driven boot parameter default value

Right now debugobjects can only be activated if the debug_objects
boot parameter is passed in via the boot command line.

Make this more convenient (and randomizable) by also providing
a .config method. Enable it by default. (DEBUG_OBJECTS itself
is default-off)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 10:07:06 +01:00
Ingo Molnar
b19b3c74c7 Merge branches 'core/debug', 'core/futexes', 'core/locking', 'core/rcu', 'core/signal', 'core/urgent' and 'core/xen' into core/core 2008-11-24 17:44:55 +01:00
Tejun Heo
0e11e342ba block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT
CONFIG_DEBUG_BLOCK_EXT_DEVT can break booting even on some modern
distros.  Add BIG FAT WARNING to keep people at a safe distance.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:56 +02:00
Jason Baron
346e15beb5 driver core: basic infrastructure for per-module dynamic debug messages
Base infrastructure to enable per-module debug messages.

I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes
control of debugging statements on a per-module basis in one /proc file,
currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG,
is not set, debugging statements can still be enabled as before, often by
defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no
affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set.

The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That
is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls
can be dynamically enabled/disabled on a per-module basis.

Future plans include extending this functionality to subsystems, that define 
their own debug levels and flags.

Usage:

Dynamic debugging is controlled by the debugfs file, 
<debugfs>/dynamic_printk/modules. This file contains a list of the modules that
can be enabled. The format of the file is as follows:

	<module_name> <enabled=0/1>
		.
		.
		.

	<module_name> : Name of the module in which the debug call resides
	<enabled=0/1> : whether the messages are enabled or not

For example:

	snd_hda_intel enabled=0
	fixup enabled=1
	driver enabled=0

Enable a module:

	$echo "set enabled=1 <module_name>" > dynamic_printk/modules

Disable a module:

	$echo "set enabled=0 <module_name>" > dynamic_printk/modules

Enable all modules:

	$echo "set enabled=1 all" > dynamic_printk/modules

Disable all modules:

	$echo "set enabled=0 all" > dynamic_printk/modules

Finally, passing "dynamic_printk" at the command line enables
debugging for all modules. This mode can be turned off via the above
disable command.

[gkh: minor cleanups and tweaks to make the build work quietly]

Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:47 -07:00
Ingo Molnar
8daf14cf56 Merge branches 'x86/xen', 'x86/build', 'x86/microcode', 'x86/mm-debug-v2', 'x86/memory-corruption-check', 'x86/early-printk', 'x86/xsave', 'x86/ptrace-v2', 'x86/quirks', 'x86/setup', 'x86/spinlocks' and 'x86/signal' into x86/core-v2 2008-10-12 15:50:02 +02:00
Linus Torvalds
b922df7383 Merge branch 'rcu-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'rcu-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (21 commits)
  rcu: RCU-based detection of stalled CPUs for Classic RCU, fix
  rcu: RCU-based detection of stalled CPUs for Classic RCU
  rcu: add rcu_read_lock_sched() / rcu_read_unlock_sched()
  rcu: fix sparse shadowed variable warning
  doc/RCU: fix pseudocode in rcuref.txt
  rcuclassic: fix compiler warning
  rcu: use irq-safe locks
  rcuclassic: fix compilation NG
  rcu: fix locking cleanup fallout
  rcu: remove redundant ACCESS_ONCE definition from rcupreempt.c
  rcu: fix classic RCU locking cleanup lockdep problem
  rcu: trace fix possible mem-leak
  rcu: just rename call_rcu_bh instead of making it a macro
  rcu: remove list_for_each_rcu()
  rcu: fixes to include/linux/rcupreempt.h
  rcu: classic RCU locking and memory-barrier cleanups
  rcu: prevent console flood when one CPU sees another AWOL via RCU
  rcu, debug: detect stalled grace periods, cleanups
  rcu, debug: detect stalled grace periods
  rcu classic: new algorithm for callbacks-processing(v2)
  ...
2008-10-10 13:10:51 -07:00
Jens Axboe
581d4e28d9 block: add fault injection mechanism for faking request timeouts
Only works for the generic request timer handling. Allows one to
sporadically ignore request completions, thus exercising the timeout
handling.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:17 +02:00
Tejun Heo
55dc7db70a init: DEBUG_BLOCK_EXT_DEVT requires explicit root= param
DEBUG_BLOCK_EXT_DEVT shuffles SCSI and IDE device numbers and root
device number set using rdev become meaningless.  Root devices should
be explicitly specified using textual names.  Warn about it if root
can't be found and DEBUG_BLOCK_EXT_DEVT is enabled.  Also, add warning
to the help text.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:11 +02:00
Jens Axboe
759f8ca304 Change default value of CONFIG_DEBUG_BLOCK_EXT_DEVT to 'n'
It's a debug option that you would explicitly enable to test this
feature, we should default it to 'n' to prevent accidental surprises
for now.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:11 +02:00
Tejun Heo
870d665612 block: implement CONFIG_DEBUG_BLOCK_EXT_DEVT
Extended devt introduces non-contiguos device numbers.  This patch
implements a debug option which forces most devt allocations to be
from the extended area and spreads them out.  This is enabled by
default if DEBUG_KERNEL is set and achieves...

1. Detects code paths in kernel or userland which expect predetermined
   consecutive device numbers.

2. When something goes wrong, avoid corruption as adding to the minor
   of earlier partition won't lead to the wrong but valid device.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:06 +02:00
Paul E. McKenney
2133b5d7ff rcu: RCU-based detection of stalled CPUs for Classic RCU
This patch adds stalled-CPU detection to Classic RCU.  This capability
is enabled by a new config variable CONFIG_RCU_CPU_STALL_DETECTOR, which
defaults disabled.

This is a debugging feature to detect infinite loops in kernel code, not
something that non-kernel-hackers would be expected to care about.

This feature can detect looping CPUs in !PREEMPT builds and looping CPUs
with preemption disabled in PREEMPT builds.  This is essentially a port of
this functionality from the treercu patch, replacing the stall debug patch
that is already in tip/core/rcu (commit 67182ae1c4).

The changes from the patch in tip/core/rcu include making the config
variable name match that in treercu, changing from seconds to jiffies to
avoid spurious warnings, and printing a boot message when this feature
is enabled.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-03 10:36:08 +02:00
Ingo Molnar
6003ab0bad Merge branch 'linus' into core/debug
Conflicts:
	lib/vsprintf.c

Manual merge:

	include/linux/kernel.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-10 09:09:51 +02:00
Arjan van de Ven
1b2439dbb7 debug: add notifier chain debugging
during some development we suspected a case where we left something
in a notifier chain that was from a module that was unloaded already...
and that sort of thing is rather hard to track down.

This patch adds a very simple sanity check (which isn't all that
expensive) to make sure the notifier we're about to call is
actually from either the kernel itself of from a still-loaded
module, avoiding a hard-to-chase-down crash.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-10 09:08:50 +02:00
Ingo Molnar
429b022af4 Merge commit 'v2.6.27-rc6' into core/rcu 2008-09-10 08:35:40 +02:00
Tony Breeds
7563dc6458 powerpc: Work around gcc's -fno-omit-frame-pointer bug
This bug is causing random crashes
(http://bugzilla.kernel.org/show_bug.cgi?id=11414).

-fno-omit-frame-pointer is only needed on powerpc when -pg is also
supplied, and there is a gcc bug that causes incorrect code generation
on 32-bit powerpc when -fno-omit-frame-pointer is used---it uses stack
locations below the stack pointer, which is not allowed by the ABI
because those locations can and sometimes do get corrupted by an
interrupt.

This ensures that CONFIG_FRAME_POINTER is only selected by ftrace.
When CONFIG_FTRACE is enabled we also pass -mno-sched-epilog to work
around the gcc codegen bug.

Patch based on work by:
	Andreas Schwab <schwab@suse.de>
	Segher Boessenkool <segher@kernel.crashing.org>

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-03 20:53:34 +10:00
Andi Kleen
9e94cd325b Move sysctl check into debugging section and don't make it default y
I noticed that sysctl_check.o was the largest object file in
a allnoconfig build in kernel/*.

  36243       0       0   36243    8d93 kernel/sysctl_check.o

This is because it was default y and && EMBEDDED. But I don't
really see a need for a non kernel developer to have their
sysctls checked all the time.

So move the Kconfig into the kernel debugging section and
also drop the default y and the EMBEDDED check.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-16 17:13:43 -07:00
Randy Dunlap
3794f3e812 docsrc: build Documentation/ sources
Currently source files in the Documentation/ sub-dir can easily bit-rot
since they are not generally buildable, either because they are hidden in
text files or because there are no Makefile rules for them.  This needs to
be fixed so that the source files remain usable and good examples of code
instead of bad examples.

Add the ability to build source files that are in the Documentation/ dir.
Add to Kconfig as "BUILD_DOCSRC" config symbol.

Use "CONFIG_BUILD_DOCSRC=1 make ..." to build objects from the
Documentation/ sources.  Or enable BUILD_DOCSRC in the *config system.
However, this symbol depends on HEADERS_CHECK since the header files need
to be installed (for userspace builds).

Built (using cross-tools) for x86-64, i386, alpha, ia64, sparc32,
sparc64, powerpc, sh, m68k, & mips.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12 16:07:30 -07:00
Paul E. McKenney
67182ae1c4 rcu, debug: detect stalled grace periods
this is a diagnostic patch for Classic RCU.

The approach is to record a timestamp at the beginning
of the grace period (in rcu_start_batch()), then have
rcu_check_callbacks() complain if:

 1.	it is running on a CPU that has holding up grace periods for
 	a long time (say one second).  This will identify the culprit
 	assuming that the culprit has not disabled hardware irqs,
 	instruction execution, or some such.

 2.	it is running on a CPU that is not holding up grace periods,
 	but grace periods have been held up for an even longer time
 	(say two seconds).

It is enabled via the default-off CONFIG_DEBUG_RCU_STALL kernel parameter.

Rather than exponential backoff, it backs off to once per 30 seconds.
My feeling upon thinking on it was that if you have stalled RCU grace
periods for that long, a few extra printk() messages are probably the
least of your worries...

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: David Witbrodt <dawitbro@sbcglobal.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 13:35:18 +02:00
Mel Gorman
6b74ab97bc mm: add a basic debugging framework for memory initialisation
Boot initialisation is very complex, with significant numbers of
architecture-specific routines, hooks and code ordering.  While significant
amounts of the initialisation is architecture-independent, it trusts the data
received from the architecture layer.  This is a mistake, and has resulted in
a number of difficult-to-diagnose bugs.

This patchset adds some validation and tracing to memory initialisation.  It
also introduces a few basic defensive measures.  The validation code can be
explicitly disabled for embedded systems.

This patch:

Add additional debugging and verification code for memory initialisation.

Once enabled, the verification checks are always run and when required
additional debugging information may be outputted via a mminit_loglevel=
command-line parameter.

The verification code is placed in a new file mm/mm_init.c.  Ideally other mm
initialisation code will be moved here over time.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:13 -07:00
Linus Torvalds
d7b6de14a0 Merge branch 'core/softlockup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core/softlockup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  softlockup: fix invalid proc_handler for softlockup_panic
  softlockup: fix watchdog task wakeup frequency
  softlockup: fix watchdog task wakeup frequency
  softlockup: show irqtrace
  softlockup: print a module list on being stuck
  softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression
  softlockup: fix false positives on nohz if CPU is 100% idle for more than 60 seconds
  softlockup: fix softlockup_thresh fix
  softlockup: fix softlockup_thresh unaligned access and disable detection at runtime
  softlockup: allow panic on lockup
2008-07-23 18:34:13 -07:00
Robert P. J. Day
ff543332ec debugfs: Add a reference to the debugfs API documentation.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:40 -07:00
Ingo Molnar
1e09481365 Merge branch 'linus' into core/softlockup
Conflicts:

	kernel/softlockup.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15 23:12:58 +02:00
Ingo Molnar
6c9fcaf2ee Merge branch 'core/rcu' into core/rcu-for-linus 2008-07-15 21:10:12 +02:00
Linus Torvalds
af5329cdf5 Merge branch 'core/stacktrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core/stacktrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  generic-ipi: powerpc/generic-ipi tree build failure
  stacktrace: fix build failure on sparc64
  stacktrace: export save_stack_trace[_tsk]
  stacktrace: fix modular build, export print_stack_trace and save_stack_trace
  backtrace: replace timer with tasklet + completions
  stacktrace: add saved stack traces to backtrace self-test
  stacktrace: print_stack_trace() cleanup
  debugging: make stacktrace independent from DEBUG_KERNEL
  stacktrace: don't crash on invalid stack trace structs
2008-07-15 10:31:35 -07:00
Vegard Nossum
ad118c54a3 stacktrace: add saved stack traces to backtrace self-test
This patch adds saved stack-traces to the backtrace suite of self-tests.

Note that we don't depend on or unconditionally enable CONFIG_STACKTRACE
because not all architectures may have it (and we still want to enable the
other tests for those architectures).

Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 18:09:15 +02:00
Jiri Slaby
59ea746337 MM: virtual address debug
Add some (configurable) expensive sanity checking to catch wrong address
translations on x86.

- create linux/mmdebug.h file to be able include this file in
  asm headers to not get unsolvable loops in header files
- __phys_addr on x86_32 became a function in ioremap.c since
  PAGE_OFFSET, is_vmalloc_addr and VMALLOC_* non-constasts are undefined
  if declared in page_32.h
- add __phys_addr_const for initializing doublefault_tss.__cr3

Tested on 386, 386pae, x86_64 and x86_64 numa=fake=2.

Contains Andi's enable numa virtual address debug patch.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-19 13:31:42 +02:00
Paul E. McKenney
31a72bce0b rcu: make rcutorture more vicious: reinstate boot-time testing
This patch re-institutes the ability to build rcutorture directly into
the Linux kernel.  The reason that this capability was removed was that
this could result in your kernel being pretty much useless, as rcutorture
would be running starting from early boot.  This problem has been avoided
by (1) making rcutorture run only three seconds of every six by default,
(2) adding a CONFIG_RCU_TORTURE_TEST_RUNNABLE that permits rcutorture
to be quiesced at boot time, and (3) adding a sysctl in /proc named
/proc/sys/kernel/rcutorture_runnable that permits rcutorture to be
quiesced and unquiesced when built into the kernel.

Please note that this /proc file is -not- available when rcutorture
is built as a module.  Please also note that to get the earlier
take-no-prisoners behavior, you must use the boot command line to set
rcutorture's "stutter" parameter to zero.

The rcutorture quiescing mechanism is currently quite crude: loops
in each rcutorture process that poll a global variable once per tick.
Suggestions for improvement are welcome.  The default action will
be to reduce the polling rate to a few times per second.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-19 11:22:15 +02:00
Ingo Molnar
1462a20005 Revert "prohibit rcutorture from being compiled into the kernel"
This reverts commit 9aaffc898f.

That commit was a very bad idea. RCU_TORTURE found many boot timing
bugs and other sorts of bugs in the past, so excluding it from
boot images is very silly.

The option already depends on DEBUG_KERNEL and is disabled by default.
Even when it runs, the test threads are reniced. If it annoys people
we could add a runtime sysctl.
2008-06-16 08:40:04 +02:00
Ingo Molnar
886dd58258 debugging: make stacktrace independent from DEBUG_KERNEL
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25 15:55:20 +02:00
Ingo Molnar
9c44bc03ff softlockup: allow panic on lockup
allow users to configure the softlockup detector to generate a panic
instead of a warning message.

high-availability systems might opt for this strict method (combined
with panic_timeout= boot option/sysctl), instead of generating
softlockup warnings ad infinitum.

also, automated tests work better if the system reboots reliably (into
a safe kernel) in case of a lockup.

The full spectrum of configurability is supported: boot option, sysctl
option and Kconfig option.

it's default-disabled.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25 06:34:44 +02:00
Arnaldo Carvalho de Melo
16444a8a40 ftrace: add basic support for gcc profiler instrumentation
If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is
set to a non-zero value the ftrace routine will be called everytime
we enter a kernel function that is not marked with the "notrace"
attribute.

The ftrace routine will then call a registered function if a function
happens to be registered.

[ This code has been highly hacked by Steven Rostedt and Ingo Molnar,
  so don't blame Arnaldo for all of this ;-) ]

Update:
  It is now possible to register more than one ftrace function.
  If only one ftrace function is registered, that will be the
  function that ftrace calls directly. If more than one function
  is registered, then ftrace will call a function that will loop
  through the functions to call.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 20:31:58 +02:00
Thomas Gleixner
c6f3a97f86 debugobjects: add timer specific object debugging code
Add calls to the generic object debugging infrastructure and provide fixup
functions which allow to keep the system alive when recoverable problems have
been detected by the object debugging core code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:53 -07:00
Thomas Gleixner
3ac7fe5a4a infrastructure to debug (dynamic) objects
We can see an ever repeating problem pattern with objects of any kind in the
kernel:

1) freeing of active objects
2) reinitialization of active objects

Both problems can be hard to debug because the crash happens at a point where
we have no chance to decode the root cause anymore.  One problem spot are
kernel timers, where the detection of the problem often happens in interrupt
context and usually causes the machine to panic.

While working on a timer related bug report I had to hack specialized code
into the timer subsystem to get a reasonable hint for the root cause.  This
debug hack was fine for temporary use, but far from a mergeable solution due
to the intrusiveness into the timer code.

The code further lacked the ability to detect and report the root cause
instantly and keep the system operational.

Keeping the system operational is important to get hold of the debug
information without special debugging aids like serial consoles and special
knowledge of the bug reporter.

The problems described above are not restricted to timers, but timers tend to
expose it usually in a full system crash.  Other objects are less explosive,
but the symptoms caused by such mistakes can be even harder to debug.

Instead of creating specialized debugging code for the timer subsystem a
generic infrastructure is created which allows developers to verify their code
and provides an easy to enable debug facility for users in case of trouble.

The debugobjects core code keeps track of operations on static and dynamic
objects by inserting them into a hashed list and sanity checking them on
object operations and provides additional checks whenever kernel memory is
freed.

The tracked object operations are:
- initializing an object
- adding an object to a subsystem list
- deleting an object from a subsystem list

Each operation is sanity checked before the operation is executed and the
subsystem specific code can provide a fixup function which allows to prevent
the damage of the operation.  When the sanity check triggers a warning message
and a stack trace is printed.

The list of operations can be extended if the need arises.  For now it's
limited to the requirements of the first user (timers).

The core code enqueues the objects into hash buckets.  The hash index is
generated from the address of the object to simplify the lookup for the check
on kfree/vfree.  Each bucket has it's own spinlock to avoid contention on a
global lock.

The debug code can be compiled in without being active.  The runtime overhead
is minimal and could be optimized by asm alternatives.  A kernel command line
option enables the debugging code.

Thanks to Ingo Molnar for review, suggestions and cleanup patches.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:53 -07:00
Andi Kleen
35bb5b1e0e Add option to enable -Wframe-larger-than= on gcc 4.4
Add option to enable -Wframe-larger-than= on gcc 4.4

gcc mainline (upcoming 4.4) added a new -Wframe-larger-than=...
option to warn at build time about too large stack frames. Add a config
option to enable this warning, since this very useful for the kernel.

I choose (somewhat arbitarily) 2048 as default warning threshold for 64bit
and 1024 as default for 32bit architectures.  With some research and
fixing all the code for smaller values these defaults should be probably
lowered.

With the default allyesconfigs have some new warnings, but I think
that is all code that should be just fixed.

At some point (when gcc 4.4 is released and widely used) this should
obsolete make checkstack

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-25 20:23:47 +02:00
Dave Hansen
ad775f5a8f [PATCH] r/o bind mounts: debugging for missed calls
There have been a few oopses caused by 'struct file's with NULL f_vfsmnts.
There was also a set of potentially missed mnt_want_write()s from
dentry_open() calls.

This patch provides a very simple debugging framework to catch these kinds of
bugs.  It will WARN_ON() them, but should stop us from having any oopses or
mnt_writer count imbalances.

I'm quite convinced that this is a good thing because it found bugs in the
stuff I was working on as soon as I wrote it.

[hch: made it conditional on a debug option.
      But it's still a little bit too ugly]

[hch: merged forced remount r/o fix from Dave and akpm's fix for the fix]

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-19 00:29:28 -04:00
Linus Torvalds
eddeb0e2d8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (43 commits)
  firewire: cleanups
  firewire: fix synchronization of gap counts
  firewire: wait until PHY configuration packet was transmitted (fix bus reset loop)
  firewire: remove unused struct member
  firewire: use bitwise and to get reg in handle_registers
  firewire: replace more hex values with defined csr constants
  firewire: reread config ROM when device reset the bus
  firewire: replace static ROM cache by allocated cache
  firewire: fw-ohci: work around generation bug in TI controllers (fix AV/C and more)
  firewire: fw-ohci: extend logging of bus generations and node ID
  firewire: fw-ohci: conditionally log busReset interrupts
  firewire: fw-ohci: don't append to AT context when it's not active
  firewire: fw-ohci: log regAccessFail events
  firewire: fw-ohci: make sure HCControl register LPS bit is set
  firewire: fw-ohci: missing PPC PMac feature calls in failure path
  firewire: fw-ohci: untangle a mixed unsigned/signed expression
  firewire: debug interrupt events
  firewire: fw-ohci: catch self_id_count == 0
  firewire: fw-ohci: add self ID error check
  firewire: fw-ohci: refactor probe, remove, suspend, resume
  ...
2008-04-18 11:24:29 -07:00
Stefan Richter
080de8c2c5 firewire: fw-ohci: add option for remote debugging
This way firewire-ohci can be used for remote debugging like ohci1394.
Version with amendment from Fri, 11 Apr 2008 00:08:08 +0200.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Bernhard Kaindl <bk@suse.de>
2008-04-18 17:55:33 +02:00
Linus Torvalds
9732b61123 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-kgdb
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-kgdb:
  kgdb: always use icache flush for sw breakpoints
  kgdb: fix SMP NMI kgdb_handle_exception exit race
  kgdb: documentation fixes
  kgdb: allow static kgdbts boot configuration
  kgdb: add documentation
  kgdb: Kconfig fix
  kgdb: add kgdb internal test suite
  kgdb: fix several kgdb regressions
  kgdb: kgdboc pl011 I/O module
  kgdb: fix optional arch functions and probe_kernel_*
  kgdb: add x86 HW breakpoints
  kgdb: print breakpoint removed on exception
  kgdb: clocksource watchdog
  kgdb: fix NMI hangs
  kgdb: fix kgdboc dynamic module configuration
  kgdb: document parameters
  x86: kgdb support
  consoles: polling support, kgdboc
  kgdb: core
  uaccess: add probe_kernel_write()
2008-04-18 08:37:01 -07:00
Linus Torvalds
d7bb545d86 Merge branch 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc
* 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc:
  Remove DEBUG_SEMAPHORE from Kconfig
  Improve semaphore documentation
  Simplify semaphore implementation
  Add down_timeout and change ACPI to use it
  Introduce down_killable()
  Generic semaphore implementation
  Add semaphore.h to kernel_lock.c
  Fix quota.h includes
2008-04-18 08:25:29 -07:00
Jason Wessel
dc7d552705 kgdb: core
kgdb core code. Handles the protocol and the arch details.

[ mingo@elte.hu: heavily modified, simplified and cleaned up. ]
[ xemul@openvz.org: use find_task_by_pid_ns ]

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 20:05:37 +02:00
Matthew Wilcox
2342e51ba2 Remove DEBUG_SEMAPHORE from Kconfig
Alpha and FRV mutexes had an option to print lots of debugging messages
in their semaphore implementation.  This feature has not been carried
over to the generic semaphores, so remove the stale Kconfig option.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-17 10:53:01 -04:00
Christoph Lameter
5b06c853ad slub: Deal with config variable dependencies
count_partial() is used by both slabinfo and the sysfs proc support. Move
the function directly before the beginning of the sysfs code so that it can
be easily found. Rework the preprocessor conditional to take into account
that slub sysfs support depends on CONFIG_SYSFS *and* CONFIG_SLUB_DEBUG.

Make CONFIG_SLUB_STATS depend on CONFIG_SLUB_DEBUG and CONFIG_SYSFS. There
is no point of keeping statistics if no one can restrive them.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2008-04-14 18:51:34 +03:00
Chris Snook
fddd9cf82c make LKDTM depend on BLOCK
Make LKDTM depend on BLOCK to prevent build failures with certain configs.

Signed-off-by: Chris Snook <csnook@redhat.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23 17:12:13 -08:00
Sam Ravnborg
fa2144ba9a kbuild: explain why DEBUG_SECTION_MISMATCH is UNDEFINED
We started to see patches enabling this - so explain why
it is disabled and the condition to enable it again.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-15 13:53:11 +01:00
Harvey Harrison
185c045c24 x86, core: remove CONFIG_FORCED_INLINING
Other than the defconfigs, remove the entry in compiler-gcc4.h,
Kconfig.debug and feature-removal-schedule.txt.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 23:24:09 +01:00
David Howells
b920de1b77 mn10300: add the MN10300/AM33 architecture to the kernel
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:30 -08:00