Commit Graph

51 Commits

Author SHA1 Message Date
Andreas Herrmann
9d260ebc09 x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config space
Use NodeId MSR to get NodeId and number of nodes per processor.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20091216144355.GB28798@alberich.amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-16 15:06:23 -08:00
Mike Travis
2eaad1fddd x86: Limit the number of processor bootup messages
When there are a large number of processors in a system, there
is an excessive amount of messages sent to the system console.
It's estimated that with 4096 processors in a system, and the
console baudrate set to 56K, the startup messages will take
about 84 minutes to clear the serial port.

This set of patches limits the number of repetitious messages
which contain no additional information.  Much of this information
is obtainable from the /proc and /sysfs.   Some of the messages
are also sent to the kernel log buffer as KERN_DEBUG messages so
dmesg can be used to examine more closely any details specific to
a problem.

The new cpu bootup sequence for system_state == SYSTEM_BOOTING:

Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
Booting Node   1, Processors  #8 #9 #10 #11 #12 #13 #14 #15 Ok.
...
Booting Node   3, Processors  #56 #57 #58 #59 #60 #61 #62 #63 Ok.
Brought up 64 CPUs

After the system is running, a single line boot message is displayed
when CPU's are hotplugged on:

    Booting Node %d Processor %d APIC 0x%x

Status of the following lines:

    CPU: Physical Processor ID:		printed once (for boot cpu)
    CPU: Processor Core ID:		printed once (for boot cpu)
    CPU: Hyper-Threading is disabled	printed once (for boot cpu)
    CPU: Thermal monitoring enabled	printed once (for boot cpu)
    CPU %d/0x%x -> Node %d:		removed
    CPU %d is now offline:		only if system_state == RUNNING
    Initializing CPU#%d:		KERN_DEBUG

Signed-off-by: Mike Travis <travis@sgi.com>
LKML-Reference: <4B219E28.8080601@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-11 15:16:00 -08:00
Borislav Petkov
27c13ecec4 x86, cpu: mv display_cacheinfo -> cpu_detect_cache_sizes
display_cacheinfo() doesn't display anything anymore and it is used to
detect CPU cache sizes. Rename it accordingly.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
LKML-Reference: <20091121130145.GA31357@liondog.tnic>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-11-23 11:59:53 -08:00
Michael Tokarev
7da8b6ddc7 trivial: fix missing printk space in amd_k7_smp_check
This trivial patch fixes one missing space in printk.

I already fixed it about half a year ago or more, but the change (in
arch/x86/kernel/cpu/smpboot.c at that time) didn't made into
mainline yet.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

index 28e5f59..6c139ed 100644
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:56 +02:00
Andreas Herrmann
6a8126911a x86, EDAC: Provide function to return NodeId of a CPU
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
2009-09-16 11:33:40 +02:00
Linus Torvalds
c7208de304 Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (22 commits)
  x86: Fix code patching for paravirt-alternatives on 486
  x86, msr: change msr-reg.o to obj-y, and export its symbols
  x86: Use hard_smp_processor_id() to get apic id for AMD K8 cpus
  x86, sched: Workaround broken sched domain creation for AMD Magny-Cours
  x86, mcheck: Use correct cpumask for shared bank4
  x86, cacheinfo: Fixup L3 cache information for AMD multi-node processors
  x86: Fix CPU llc_shared_map information for AMD Magny-Cours
  x86, msr: Fix msr-reg.S compilation with gas 2.16.1, on 32-bit too
  x86: Move kernel_fpu_using to irq_fpu_usable in asm/i387.h
  x86, msr: fix msr-reg.S compilation with gas 2.16.1
  x86, msr: Export the register-setting MSR functions via /dev/*/msr
  x86, msr: Create _on_cpu helpers for {rw,wr}msr_safe_regs()
  x86, msr: Have the _safe MSR functions return -EIO, not -EFAULT
  x86, msr: CFI annotations, cleanups for msr-reg.S
  x86, asm: Make _ASM_EXTABLE() usable from assembly code
  x86, asm: Add 32-bit versions of the combined CFI macros
  x86, AMD: Disable wrongly set X86_FEATURE_LAHF_LM CPUID bit
  x86, msr: Rewrite AMD rd/wrmsr variants
  x86, msr: Add rd/wrmsr interfaces with preset registers
  x86: add specific support for Intel Atom architecture
  ...
2009-09-14 07:57:32 -07:00
Yinghai Lu
0d96b9ff74 x86: Use hard_smp_processor_id() to get apic id for AMD K8 cpus
Otherwise, system with apci id lifting will have wrong apicid in
/proc/cpuinfo.

and use that in srat_detect_node().

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <4A998CCA.1040407@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-04 09:55:29 +02:00
Andreas Herrmann
4a376ec3a2 x86: Fix CPU llc_shared_map information for AMD Magny-Cours
Construct entire NodeID and use it as cpu_llc_id. Thus internal node
siblings are stored in llc_shared_map.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-09-03 15:09:59 -07:00
Borislav Petkov
6b0f43ddfa x86, AMD: Disable wrongly set X86_FEATURE_LAHF_LM CPUID bit
fbd8b1819e turns off the bit for
/proc/cpuinfo. However, a proper/full fix would be to additionally
turn off the bit in the CPUID output so that future callers get
correct CPU features info.

Do that by basically reversing what the BIOS wrongfully does at boot.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1251705011-18636-3-git-send-email-petkovbb@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-31 15:14:29 -07:00
Ingo Molnar
5f9ece0240 Merge commit 'v2.6.31-rc7' into x86/cleanups
Merge reason: we were on -rc1 before - go up to -rc7

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-24 12:25:54 +02:00
Kevin Winchester
fbd8b1819e x86: Clear incorrectly forced X86_FEATURE_LAHF_LM flag
Due to an erratum with certain AMD Athlon 64 processors, the
BIOS may need to force enable the LAHF_LM capability.
Unfortunately, in at least one case, the BIOS does this even
for processors that do not support the functionality.

Add a specific check that will clear the feature bit for
processors known not to support the LAHF/SAHF instructions.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Acked-by: Borislav Petkov <petkovbb@googlemail.com>
LKML-Reference: <4A80A5AD.2000209@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-11 13:34:54 +02:00
Jeremy Fitzhardinge
2cb078603a x86, amd: Don't probe for extended APIC ID if APICs are disabled
If we've logically disabled apics, don't probe the PCI space for the
AMD extended APIC ID.

[ Impact: prevent boot crash under Xen. ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Reported-by: Bastian Blank <bastian@waldi.eu.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-22 10:06:49 -07:00
Alan Cox
8bdbd962ec x86/cpu: Clean up various files a bit
No code changes except printk levels (although some of the K6
mtrr code might be clearer if there were a few as would
splitting out some of the intel cache code).

Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11 11:24:09 +02:00
Andreas Herrmann
99bd0c0fc4 x86: Set cpu_llc_id on AMD CPUs
This counts when building sched domains in case NUMA information
is not available.

( See cpu_coregroup_mask() which uses llc_shared_map which in turn is
  created based on cpu_llc_id. )

Currently Linux builds domains as follows:
(example from a dual socket quad-core system)

 CPU0 attaching sched-domain:
  domain 0: span 0-7 level CPU
   groups: 0 1 2 3 4 5 6 7

  ...

 CPU7 attaching sched-domain:
  domain 0: span 0-7 level CPU
   groups: 7 0 1 2 3 4 5 6

Ever since that is borked for multi-core AMD CPU systems.
This patch fixes that and now we get a proper:

 CPU0 attaching sched-domain:
  domain 0: span 0-3 level MC
   groups: 0 1 2 3
   domain 1: span 0-7 level CPU
    groups: 0-3 4-7

  ...

 CPU7 attaching sched-domain:
  domain 0: span 4-7 level MC
   groups: 7 4 5 6
   domain 1: span 0-7 level CPU
    groups: 4-7 0-3

This allows scheduler to assign tasks to cores on different sockets
(i.e. that don't share last level cache) for performance reasons.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20090619085909.GJ5218@alberich.amd.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-21 10:13:32 +02:00
Linus Torvalds
9b29e8228a Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Clear TS in irq_ts_save() when in an atomic section
  x86: Detect use of extended APIC ID for AMD CPUs
  x86: memtest: remove 64-bit division
  x86, UV: Fix macros for multiple coherency domains
  x86: Fix non-lazy GS handling in sys_vm86()
  x86: Add quirk for reboot stalls on a Dell Optiplex 360
  x86: Fix UV BAU activation descriptor init
2009-06-10 16:15:14 -07:00
Andreas Herrmann
42937e81a8 x86: Detect use of extended APIC ID for AMD CPUs
Booting a 32-bit kernel on Magny-Cours results in the following panic:

  ...
  Using APIC driver default
  ...
  Overriding APIC driver with bigsmp
  ...
  Getting VERSION: 80050010
  Getting VERSION: 80050010
  Getting ID: 10000000
  Getting ID: ef000000
  Getting LVT0: 700
  Getting LVT1: 10000
  Kernel panic - not syncing: Boot APIC ID in local APIC unexpected (16 vs 0)
  Pid: 1, comm: swapper Not tainted 2.6.30-rcX #2
  Call Trace:
   [<c05194da>] ? panic+0x38/0xd3
   [<c0743102>] ? native_smp_prepare_cpus+0x259/0x31f
   [<c073b19d>] ? kernel_init+0x3e/0x141
   [<c073b15f>] ? kernel_init+0x0/0x141
   [<c020325f>] ? kernel_thread_helper+0x7/0x10

The reason is that default_get_apic_id handled extension of local APIC
ID field just in case of XAPIC.

Thus for this AMD CPU, default_get_apic_id() returns 0 and
bigsmp_get_apic_id() returns 16 which leads to the respective kernel
panic.

This patch introduces a Linux specific feature flag to indicate
support for extended APIC id (8 bits instead of 4 bits width) and sets
the flag on AMD CPUs if applicable.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: <stable@kernel.org>
LKML-Reference: <20090608135509.GA12431@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-09 15:28:46 +02:00
Yinghai Lu
2759c3287d x86: don't call read_apic_id if !cpu_has_apic
should not call that if apic is disabled.

[ Impact: fix crash on certain UP configs ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <4A09CCBB.2000306@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 08:43:25 +02:00
Jan Beulich
02dde8b45c x86: move various CPU initialization objects into .cpuinit.rodata
Impact: debuggability and micro-optimization

Putting whatever is possible into the (final) .rodata section increases
the likelihood of catching memory corruption bugs early, and reduces
false cache line sharing.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <49B90961.76E4.0078.0@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12 13:13:07 +01:00
Yinghai Lu
1f442d70c8 x86: remove smp_apply_quirks()/smp_checks()
Impact: cleanup and code size reduction on 64-bit

This code is only applied to Intel Pentium and AMD K7 32-bit cpus.

Move those checks to intel_init()/amd_init() for 32-bit
so 64-bit will not build this code.

Also change to use cpu_index check to see if we need to emit warning.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <49B377D2.8030108@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-08 16:22:56 +01:00
Ingo Molnar
e641f5f525 x86, apic: remove duplicate asm/apic.h inclusions
Impact: cleanup

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 17:52:44 +01:00
Ingo Molnar
7b6aa335ca x86, apic: remove genapic.h
Impact: cleanup

Remove genapic.h and remove all references to it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 17:52:44 +01:00
Ingo Molnar
1dcdd3d15e x86: remove mach_apic.h
Spread mach_apic.h definitions into genapic.h. (with some knock-on effects
on smp.h and apic.h.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 14:16:42 +01:00
Venki Pallipadi
40fb17152c x86: support always running TSC on Intel CPUs
Impact: reward non-stop TSCs with good TSC-based clocksources, etc.

Add support for CPUID_0x80000007_Bit8 on Intel CPUs as well. This bit means
that the TSC is invariant with C/P/T states and always runs at constant
frequency.

With Intel CPUs, we have 3 classes
* CPUs where TSC runs at constant rate and does not stop n C-states
* CPUs where TSC runs at constant rate, but will stop in deep C-states
* CPUs where TSC rate will vary based on P/T-states and TSC will stop in deep
  C-states.

To cover these 3, one feature bit (CONSTANT_TSC) is not enough. So, add a
second bit (NONSTOP_TSC). CONSTANT_TSC indicates that the TSC runs at
constant frequency irrespective of P/T-states, and NONSTOP_TSC indicates
that TSC does not stop in deep C-states.

CPUID_0x8000000_Bit8 indicates both these feature bit can be set.
We still have CONSTANT_TSC _set_ and NONSTOP_TSC _not_set_ on some older Intel
CPUs, based on model checks. We can use TSC on such CPUs for time, as long as
those CPUs do not support/enter deep C-states.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-16 21:02:50 +01:00
Yinghai Lu
823b259b80 x86: print out apic id in hex format
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16 16:53:09 +02:00
Yinghai Lu
6c62aa4a3c x86: make amd.c have 64bit support code
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-08 15:32:02 +02:00
Yinghai Lu
8d71a2ea0a x86: merge header in amd_64.c
Singed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-08 15:32:01 +02:00
Yinghai Lu
11fdd252bb x86: cpu make amd.c more like amd_64.c v2
1. make 32bit have early_init_amd_mc and amd_detect_cmp
2. seperate init_amd_k5/k6/k7 ...

v2: fix compiling for !CONFIG_SMP

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-08 15:31:58 +02:00
Yinghai Lu
e322423471 x86, cpu init: call early_init_xxx in init_xxx
so we:

 1. could set some cap to ap
 2. restore some cap after memset in identify_cpu for boot cpu

esp for CONSTANT_TSC this matters, as:

before this patch:
 flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow rep_good nopl pni monitor cx16 lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs

after this patch:
 flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl pni monitor cx16 lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs

so constant_tsc is back...

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06 14:09:14 +02:00
Yinghai Lu
1b05d60d60 x86: remove duplicated get_model_name() calling
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06 14:09:12 +02:00
Yinghai Lu
10a434fcb2 x86: remove cpu_vendor_dev
1. add c_x86_vendor into cpu_dev
2. change cpu_devs to static
3. check c_x86_vendor before put that cpu_dev into array
4. remove alignment for 64bit
5. order the sequence in cpu_devs according to link sequence...
   so could put intel at first, then amd...

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-04 21:09:45 +02:00
Yinghai Lu
5fef55fddb x86: move mtrr cpu cap setting early in early_init_xxxx
Krzysztof Helt found MTRR is not detected on k6-2

root cause:
	we moved mtrr_bp_init() early for mtrr trimming,
and in early_detect we only read the CPU capability from cpuid,
so some cpu doesn't have that bit in cpuid.

So we need to add early_init_xxxx to preset those bit before mtrr_bp_init
for those earlier cpus.

this patch is for v2.6.27

Reported-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-04 21:09:43 +02:00
Jan Beulich
08ad8afaa0 x86: reduce force_mwait visibility
It's not used anywhere outside its single referencing file.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-18 15:55:09 -07:00
Robert Richter
3a27dd1ce5 x86: Move PCI IO ECS code to x86/pci
"Form follows function". Code is now where it belongs to.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 07:47:39 +02:00
Thomas Gleixner
aa276e1caf x86, clockevents: add C1E aware idle function
C1E on AMD machines is like C3 but without control from the OS. Up to
now we disabled the local apic timer for those machines as it stops
when the CPU goes into C1E. This excludes those machines from high
resolution timers / dynamic ticks, which hurts especially X2 based
laptops.

The current boot time C1E detection has another, more serious flaw
as well: some BIOSes do not enable C1E until the ACPI processor module
is loaded. This causes systems to stop working after that point.

To work nicely with C1E enabled machines we use a separate idle
function, which checks on idle entry whether C1E was enabled in the
Interrupt Pending Message MSR. This allows us to do timer broadcasting
for C1E and covers the late enablement of C1E as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 07:47:18 +02:00
Thomas Gleixner
732d7be17b x86: use cpuinfo to check for interrupt pending message msr
Simplify code: no need to do a cpuid(1) again. The cpuinfo structure
has all necessary information already.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-10 15:52:14 +02:00
Thomas Gleixner
aa83f3f2cf x86: cleanup C1E enabled detection
Rename the "MSR_K8_ENABLE_C1E" MSR to INT_PENDING_MSG, which is the
name in the data sheet as well. Move the C1E mask to the header file.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-10 15:52:07 +02:00
Robert Richter
9e26d84273 fix build bug in "x86: add PCI extended config space access for AMD Barcelona"
Also much less code now.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-10 12:32:53 +02:00
Ingo Molnar
1a5726528a fix build bug in "x86: add PCI extended config space access for AMD Barcelona" 2008-06-02 12:26:21 +02:00
Robert Richter
831d991821 x86: add PCI extended config space access for AMD Barcelona
This patch implements PCI extended configuration space access for
AMD's Barcelona CPUs. It extends the method using CF8/CFC IO
addresses. An x86 capability bit has been introduced that is set for
CPUs supporting PCI extended config space accesses.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02 11:51:19 +02:00
Dmitri Vorobiev
f3b14a32db x86: remove unused function amd_init_cpu()
There are no users for the function amd_init_cpu() defined in
arch/x86/kernel/cpu/amd.c. This patch removes this routine.

This patch was build-tested using defconfigs for i386 and x86_64,
and a few randconfig instances. Runtime tests were performed by
booting 32- and 64-bit x86 boxen up to the shell prompt.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 17:35:46 +02:00
Glauber Costa
dd46e3ca73 x86: move apic declarations to mach_apic.h
take them out of the x86_64-specific asm/mach_apic.h

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:41:30 +02:00
Ingo Molnar
16282a8e25 x86: clean up cpu capabilities accesses, amd.c
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:50 +02:00
Paolo Ciarrocchi
fb87a298fb x86: coding style fixes to arch/x86/kernel/cpu/amd.c
Before:
   total: 42 errors, 26 warnings, 350 lines checked
After:
   total: 0 errors, 26 warnings, 352 lines checked

No code changed:

arch/x86/kernel/cpu/amd.o:

   text	   data	    bss	    dec	    hex	filename
   1936	    328	      0	   2264	    8d8	amd.o.before
   1936	    328	      0	   2264	    8d8	amd.o.after

md5:
   873430a88faaf31bb4bbfe3a2a691e45  amd.o.before.asm
   873430a88faaf31bb4bbfe3a2a691e45  amd.o.after.asm

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:50 +02:00
Thomas Petazzoni
03ae5768b6 x86: use ELF section to list CPU vendor specific code
Replace the hardcoded list of initialization functions for each CPU
vendor by a list in an ELF section, which is read at initialization in
arch/x86/kernel/cpu/cpu.c to fill the cpu_devs[] array. The ELF
section, named .x86cpuvendor.init, is reclaimed after boot, and
contains entries of type "struct cpu_vendor_dev" which associates a
vendor number with a pointer to a "struct cpu_dev" structure.

This first modification allows to remove all the VENDOR_init_cpu()
functions.

This patch also removes the hardcoded calls to early_init_amd() and
early_init_intel(). Instead, we add a "c_early_init" member to the
cpu_dev structure, which is then called if not NULL by the generic CPU
initialization code. Unfortunately, in early_cpu_detect(), this_cpu is
not yet set, so we have to use the cpu_devs[] array directly.

This patch is part of the Linux Tiny project, and is needed for
further patch that will allow to disable compilation of unused CPU
support code.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 17:40:47 +02:00
Ingo Molnar
aa62999269 x86: fix bootup crash in native_read_tsc()
fix bootup crash in native_read_tsc() that was reported on an Athlon-XP
and bisected. The correct feature boundary for X86_FEATURE_MFENCE_RDTSC
is not XMM but XMM2.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-02 10:00:26 +11:00
Andi Kleen
0c07ee38c9 x86: use the correct cpuid method to detect MWAIT support for C states
Previously there was a AMD specific quirk to handle the case of
AMD Fam10h MWAIT not supporting any C states. But it turns out
that CPUID already has ways to detectly detect that without
using special quirks.

The new code simply checks if MWAIT supports at least C1 and doesn't
use it if it doesn't. No more vendor specific code.

Note this is does not simply clear MWAIT because MWAIT can be still
useful even without C states.

Credit goes to Ben Serebrin for pointing out the (nearly) obvious.

Cc: "Andreas Herrmann" <andreas.herrmann3@amd.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:16 +01:00
Andi Kleen
2b16a23538 x86: move X86_FEATURE_CONSTANT_TSC into early cpu feature detection
Need this in the next patch in time_init and that happens early.

This includes a minor fix on i386 where early_intel_workarounds()
[which is now called early_init_intel] really executes early as
the comments say.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:40 +01:00
Andi Kleen
de4218634e x86: implement support to synchronize RDTSC through MFENCE on AMD CPUs
According to AMD RDTSC can be synchronized through MFENCE.
Implement the necessary CPUID bit for that.

Cc: andreas.herrmann3@amd.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:37 +01:00
Simon Arlott
27b46d7661 spelling fixes: arch/i386/
Spelling fixes in arch/i386/.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 01:13:56 +02:00
Thomas Gleixner
c1e3619edd x86: print info about late C1E detection on 32bit as well
Some BIOSes set the C1E flag only on the second core. Print a warning so
the Firmware Toolkit can check for it.

mingo: fix C1E build bug on 32-bit

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-17 20:16:50 +02:00