Commit Graph

181 Commits

Author SHA1 Message Date
Sudeep Holla
bcb2b0b2ba ACPI: Eliminate CONFIG_.*{, _MODULE} #ifdef in favor of IS_ENABLED()
This commit removes all CONFIG_.*{,_MODULE} in ACPI code, replacing it
with IS_ENABLED().

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-15 03:05:45 +02:00
Rafael J. Wysocki
ef5f5de069 Merge branch 'acpi-pm'
* acpi-pm:
  ACPI / bus: Move duplicate code to a separate new function
  mfd: Add support for Intel Sunrisepoint LPSS devices
  dmaengine: add a driver for Intel integrated DMA 64-bit
  mfd: make mfd_remove_devices() iterate in reverse order
  driver core: implement device_for_each_child_reverse()
  klist: implement klist_prev()
  Driver core: wakeup the parent device before trying probe
  ACPI / PM: Attach ACPI power domain only once
  PM / QoS: Make it possible to expose device latency tolerance to userspace
  ACPI / PM: Update the copyright notice and description of power.c
2015-09-01 03:38:43 +02:00
Rafael J. Wysocki
73990fc810 Merge branches 'acpi-scan', 'acpi-processor' and 'acpi-assorted'
* acpi-scan:
  ACPI / bus: Move ACPI bus type registration
  ACPI / scan: Move bus operations and notification routines to bus.c
  ACPI / scan: Move device matching code to bus.c
  ACPI / scan: Move sysfs-related device code to a separate file

* acpi-processor:
  PCC: Disable compilation by default
  ACPI: Decouple ACPI idle and ACPI processor drivers
  ACPI: Split out ACPI PSS from ACPI Processor driver
  PCC: Initialize PCC Mailbox earlier at boot
  ACPI / processor: remove leftover __refdata annotations

* acpi-assorted:
  ACPI: fix acpi_debugfs_init prototype
  ACPI: Remove FSF mailing addresses
2015-09-01 03:38:22 +02:00
Rafael J. Wysocki
e91a398c31 ACPI / bus: Move duplicate code to a separate new function
After merging commit 712e960f0e (ACPI / PM: Attach ACPI power
domain only once) with commit 1dcc3d3362 (ACPI / bus: Move ACPI
bus type registration) there is some duplicate code in
acpi_device_is_first_physical_node() and acpi_companion_match()
that can be moved to a separate routine and called from both
places.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
2015-08-06 03:11:47 +02:00
Rafael J. Wysocki
3431e490b5 Merge branch 'acpi-scan' into acpi-pm
Conflicts:
	drivers/acpi/scan.c

The conflict is resolved by moving the just introduced
acpi_device_is_first_physical_node() to bus.c and using
the existing acpi_companion_match() from there.

There will be an additional commit to combine the two.
2015-07-29 23:57:51 +02:00
Rafael J. Wysocki
1dcc3d3362 ACPI / bus: Move ACPI bus type registration
Move the registration of the ACPI bus type to acpi_bus_init() and
avoid using ACPI going forward if it fails (too many things depend on
the presence of the ACPI bus type).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 22:54:09 +02:00
Rafael J. Wysocki
5894b0c46e ACPI / scan: Move bus operations and notification routines to bus.c
To reduce the size of scan.c and improve the readability of it, move
code related to device notification, the definitions of the ACPI bus
operations and the driver management code to drivers/acpi/bus.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 22:54:01 +02:00
Rafael J. Wysocki
68c6b148da ACPI / scan: Move device matching code to bus.c
To reduce the size of scan.c and improve the readability of it, move
code related device matching into drivers/acpi/bus.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-17 22:53:52 +02:00
Jarkko Nikula
4c62dbbce9 ACPI: Remove FSF mailing addresses
There is no need to carry potentially outdated Free Software Foundation
mailing address in file headers since the COPYING file includes it.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-08 02:27:32 +02:00
Rafael J. Wysocki
b064a8fa77 ACPI / init: Switch over platform to the ACPI mode later
Commit 73f7d1ca32 "ACPI / init: Run acpi_early_init() before
timekeeping_init()" moved the ACPI subsystem initialization,
including the ACPI mode enabling, to an earlier point in the
initialization sequence, to allow the timekeeping subsystem
use ACPI early.  Unfortunately, that resulted in boot regressions
on some systems and the early ACPI initialization was moved toward
its original position in the kernel initialization code by commit
c4e1acbb35 "ACPI / init: Invoke early ACPI initialization later".

However, that turns out to be insufficient, as boot is still broken
on the Tyan S8812 mainboard.

To fix that issue, split the ACPI early initialization code into
two pieces so the majority of it still located in acpi_early_init()
and the part switching over the platform into the ACPI mode goes into
a new function, acpi_subsystem_init(), executed at the original early
ACPI initialization spot.

That fixes the Tyan S8812 boot problem, but still allows ACPI
tables to be loaded earlier which is useful to the EFI code in
efi_enter_virtual_mode().

Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141
Fixes: 73f7d1ca32 "ACPI / init: Run acpi_early_init() before timekeeping_init()"
Reported-and-tested-by: Marius Tolzmann <tolzmann@molgen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
2015-06-10 23:51:27 +02:00
Hanjun Guo
fbe61ec71a ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi
Introduce ACPI_IRQ_MODEL_GIC which is needed for ARM64 as GIC is
used, and then register device's gsi with the core IRQ subsystem.

acpi_register_gsi() is similar to DT based irq_of_parse_and_map(),
since gsi is unique in the system, so use hwirq number directly
for the mapping.

We are going to implement stacked domains when GICv2m, GICv3, ITS
support are added.

CC: Marc Zyngier <marc.zyngier@arm.com>
Originally-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Tested-by: Yijing Wang <wangyijing@huawei.com>
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Jon Masters <jcm@redhat.com>
Tested-by: Timur Tabi <timur@codeaurora.org>
Tested-by: Robert Richter <rrichter@cavium.com>
Acked-by: Robert Richter <rrichter@cavium.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-26 15:13:07 +00:00
Bjorn Helgaas
f91ce35e47 ACPIPHP / radeon / nouveau: Remove acpi_bus_no_hotplug()
Revert parts of f244d8b623 ("ACPIPHP / radeon / nouveau: Fix VGA
switcheroo problem related to hotplug").

A previous commit 5493b31f0b55 ("PCI: Add pci_ignore_hotplug() to ignore
hotplug events for a device") added equivalent functionality implemented in
a different way for both acpiphp and pciehp.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Rajat Jain <rajatxjain@gmail.com>
2014-09-15 13:15:34 -06:00
Lv Zheng
a8278efd84 ACPICA: Linux: Add stub support for Linux specific variables and functions.
There are global variables and functions not upstreamed to the ACPICA code
base.  Such symbols still can be referenced by external users as they are
listed in the acpixf.h.  This patch uses ACPI_GLOBAL and
ACPI_EXTERNAL_RETURN_STATUS mechanism to add stub support for such symbols.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-20 01:34:57 +02:00
Rafael J. Wysocki
0e36d43c9c Merge branch 'acpica'
* acpica: (63 commits)
  ACPICA: Namespace: Remove _PRP method support.
  ACPI: Fix x86 regression related to early mapping size limitation
  ACPICA: Tables: Add mechanism to control early table checksum verification.
  ACPICA: acpidump: Fix repetitive table dump in -n mode.
  ACPI: Clean up acpi_os_map/unmap_memory() to eliminate __iomem.
  ACPICA: Clean up redudant definitions already defined elsewhere
  ACPICA: Linux headers: Add <asm/acenv.h> to remove mis-ordered inclusion of <asm/acpi.h>
  ACPICA: Linux headers: Add <acpi/platform/aclinuxex.h>
  ACPICA: Linux headers: Remove ACPI_PREEMPTION_POINT() due to no usages.
  ACPICA: Update version to 20140424.
  ACPICA: Comment/format update, no functional change.
  ACPICA: Events: Update GPE handling and initialization code.
  ACPICA: Remove extraneous error message for large number of GPEs.
  ACPICA: Tables: Remove old mechanism to validate if XSDT contains NULL entries.
  ACPICA: Tables: Add new mechanism to skip NULL entries in RSDT and XSDT.
  ACPICA: acpidump: Add support to force using RSDT.
  ACPICA: Back port of improvements on exception code.
  ACPICA: Back port of _PRP update.
  ACPICA: acpidump: Fix truncated RSDP signature validation.
  ACPICA: Linux header: Add support for stubbed externals.
  ...
2014-06-03 23:12:27 +02:00
Rafael J. Wysocki
91ab377ba3 Merge branches 'acpi-tables' and 'acpi-general'
* acpi-tables:
  ACPI: Fix conflict between customized DSDT and DSDT local copy

* acpi-general:
  ACPI: Add acpi_bus_attach_private_data() to attach data to ACPI handle
2014-06-03 23:10:06 +02:00
Lv Zheng
4fc0a7e889 ACPI: Fix x86 regression related to early mapping size limitation
The following warning message is triggered:
 WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:136 __early_ioremap+0x11f/0x1f2()
 Modules linked in:
 CPU: 0 PID: 0 Comm: swapper Not tainted 3.15.0-rc1-00017-g86dfc6f3-dirty #298
 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS SE5C600.86B.99.99.x036.091920111209 09/19/2011
  0000000000000009 ffffffff81b75c40 ffffffff817c627b 0000000000000000
  ffffffff81b75c78 ffffffff81067b5d 000000000000007b 8000000000000563
  00000000b96b20dc 0000000000000001 ffffffffff300e0c ffffffff81b75c88
 Call Trace:
  [<ffffffff817c627b>] dump_stack+0x45/0x56
  [<ffffffff81067b5d>] warn_slowpath_common+0x7d/0xa0
  [<ffffffff81067c3a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff81d4b9d5>] __early_ioremap+0x11f/0x1f2
  [<ffffffff81d4bc5b>] early_ioremap+0x13/0x15
  [<ffffffff81d2b8f3>] __acpi_map_table+0x13/0x18
  [<ffffffff817b8d1a>] acpi_os_map_memory+0x26/0x14e
  [<ffffffff813ff018>] acpi_tb_acquire_table+0x42/0x70
  [<ffffffff813ff086>] acpi_tb_validate_table+0x27/0x37
  [<ffffffff813ff0e5>] acpi_tb_verify_table+0x22/0xd8
  [<ffffffff813ff6a8>] acpi_tb_install_non_fixed_table+0x60/0x1c9
  [<ffffffff81d61024>] acpi_tb_parse_root_table+0x218/0x26a
  [<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
  [<ffffffff81d610cd>] acpi_initialize_tables+0x57/0x59
  [<ffffffff81d5f25d>] acpi_table_init+0x1b/0x99
  [<ffffffff81d2bca0>] acpi_boot_table_init+0x1e/0x85
  [<ffffffff81d23043>] setup_arch+0x99d/0xcc6
  [<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
  [<ffffffff81d1bbbe>] start_kernel+0x8b/0x415
  [<ffffffff81d1b120>] ? early_idt_handlers+0x120/0x120
  [<ffffffff81d1b5ee>] x86_64_start_reservations+0x2a/0x2c
  [<ffffffff81d1b72e>] x86_64_start_kernel+0x13e/0x14d
 ---[ end trace 11ae599a1898f4e7 ]---
when installing the following table during early stage:
 ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL  S2600CP  00004000 INTL 20100331)
The regression is caused by the size limitation of the x86 early IO mapping.

The root cause is:
 1. ACPICA doesn't split IO memory mapping and table mapping;
 2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map
    mechanism during early boot stage, which is more suitable for only IO
    mappings.

This patch fixes this issue by utilizing acpi_gbl_verify_table_checksum to
disable the table mapping during early stage and enabling it again for the
late stage. In this way, the normal code path is not affected. Then after
the code related to the root cause is cleaned up, the early checksum
verification can be easily re-enabled.

A new boot parameter - acpi_force_table_verification is introduced for
the platforms that require the checksum verification to stop loading bad
tables.

This fix also covers the checksum verification for the table overrides. Now
large tables can also be overridden using the initrd override mechanism.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-and-tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-01 00:20:52 +02:00
Lan Tianyu
72013795a7 ACPI: Add acpi_bus_attach_private_data() to attach data to ACPI handle
There is already acpi_bus_get_private_data() to get ACPI handle data
which is associated with acpi_bus_private_data_handler(). This patch
is to add acpi_bus_attach_private_data() to make a pair and facilitate
to attach and get data to/from ACPI handle.

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-27 01:19:54 +02:00
Lv Zheng
73577d1df8 ACPI: Fix conflict between customized DSDT and DSDT local copy
This patch fixes the following issue:
If DSDT is customized, no local DSDT copy is needed.

References: https://bugzilla.kernel.org/show_bug.cgi?id=69711
Signed-off-by: Enrico Etxe Arte <goitizena.generoa@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 2.6.35+ <stable@vger.kernel.org> # 2.6.35+
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-17 01:55:33 +02:00
Rafael J. Wysocki
d0103387bc ACPI / notify: Clean up handling of hotplug events
Make the handling of hotplug events in acpi_bus_notify() slightly
cleaner by using an extra local variable to indicate when
acpi_hotplug_schedule() should be called.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-07 01:00:19 +02:00
Rafael J. Wysocki
f66abe92ce ACPI / notify: Do not block unknown type notifications in root handler
Commit 1a699476e2 "ACPI / hotplug / PCI: Hotplug notifications from
acpi_bus_notify()" changed the root notify handler, acpi_bus_notify(),
to block unknown type norifications, but it overlooked the fact that
they might be propagated to drivers via the ->notify() callback.

Fix the problem by allowing drivers to receive unknown type
notifications via ->notify() as before.

Fixes: 1a699476e2 (ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify())
Reported-and-tested-by: Mantas Mikulėnas <grawity@gmail.com>
Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-24 19:27:49 +02:00
Rafael J. Wysocki
2eb060975d Merge branch 'acpi-ost'
* acpi-ost:
  ACPI: Drop acpi_evaluate_hotplug_ost() and ACPI_HOTPLUG_OST
  ACPI: use device name LNXSYBUS.xx for ACPI \_SB and \_TZ objects
  ACPI / processor: use acpi_evaluate_ost() to replace open-coded version
  ACPI / PAD / xen: use acpi_evaluate_ost() to replace open-coded version
  ACPI / PAD: use acpi_evaluate_ost() to replace open-coded version
  ACPI: rename acpi_evaluate_hotplug_ost() to acpi_evaluate_ost()
2014-03-17 13:48:18 +01:00
Rafael J. Wysocki
1e3bcb596c ACPI / hotplug: Rework deferred execution of acpi_device_hotplug()
Since the only function executed by acpi_hotplug_execute() is
acpi_device_hotplug() and it only is called by the ACPI core,
simplify its definition so that it only takes two arguments, the
ACPI device object pointer and event code, rename it to
acpi_hotplug_schedule() and move its header from acpi_bus.h to
the ACPI core's internal header file internal.h.  Modify the
definition of acpi_device_hotplug() so that its first argument is
an ACPI device object pointer and modify the definition of
struct acpi_hp_work accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2014-03-05 01:26:35 +01:00
Rafael J. Wysocki
700b8422fb ACPI: Drop acpi_evaluate_hotplug_ost() and ACPI_HOTPLUG_OST
Replace acpi_evaluate_hotplug_ost() with acpi_evaluate_ost()
everywhere and drop the ACPI_HOTPLUG_OST symbol so that hotplug
_OST is supported unconditionally.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
2014-02-22 00:50:49 +01:00
Rafael J. Wysocki
1a699476e2 ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify()
Since acpi_bus_notify() is executed on all notifications for all
devices anyway, make it execute acpi_device_hotplug() for all
hotplug events instead of installing notify handlers pointing to
the same function for all hotplug devices.

This change reduces both the size and complexity of ACPI-based device
hotplug code.  Moreover, since acpi_device_hotplug() only does
significant things for devices that have either an ACPI scan handler,
or a hotplug context with .eject() defined, and those devices
had notify handlers pointing to acpi_hotplug_notify_cb() installed
before anyway, this modification shouldn't change functionality.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-06 17:31:52 +01:00
Rafael J. Wysocki
78ea4639a7 ACPI / hotplug: Fix potential race in acpi_bus_notify()
There is a slight possibility for the ACPI device object pointed to
by adev in acpi_hotplug_notify_cb() to become invalid between the
acpi_bus_get_device() that it comes from and the subsequent dereference
of that pointer under get_device().  Namely, if acpi_scan_drop_device()
runs in parallel with acpi_hotplug_notify_cb(), acpi_device_del_work_fn()
queued up by it may delete the device object in question right after
a successful execution of acpi_bus_get_device() in acpi_bus_notify().

An analogous problem is present in acpi_bus_notify() where the device
pointer coming from acpi_bus_get_device() may become invalid before
it subsequent dereference in the "if" block.

To prevent that from happening, introduce a new function,
acpi_bus_get_acpi_device(), working analogously to acpi_bus_get_device()
except that it will grab a reference to the ACPI device object returned
by it and it will do that under the ACPICA's namespace mutex.  Then,
make both acpi_hotplug_notify_cb() and acpi_bus_notify() use
acpi_bus_get_acpi_device() instead of acpi_bus_get_device() so as to
ensure that the pointers used by them will not become stale at one
point.

In addition to that, introduce acpi_bus_put_acpi_device() as a wrapper
around put_device() to be used along with acpi_bus_get_acpi_device()
and make the (new) users of the latter use acpi_bus_put_acpi_device()
too.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-02-05 17:41:18 +01:00
Rafael J. Wysocki
82e180598b Merge branches 'acpi-processor', 'acpi-hotplug', 'acpi-init', 'acpi-pm' and 'acpica'
* acpi-processor:
  ACPI / scan: reduce log level of "ACPI: \_PR_.CPU4: failed to get CPU APIC ID"
  ACPI / processor: Return specific error value when mapping lapic id

* acpi-hotplug:
  ACPI / scan: Clear match_driver flag in acpi_bus_trim()

* acpi-init:
  ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API

* acpi-pm:
  ACPI / PM: Use ACPI_COMPANION() to get ACPI companions of devices

* acpica:
  ACPICA: Remove bool usage from ACPICA.
2014-01-29 11:47:18 +01:00
Mark Brown
49a12877d2 ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API
There is currently no facility in ACPI to express the hookup of voltage
regulators, the expectation is that the regulators that exist in the
system will be handled transparently by firmware if they need software
control at all. This means that if for some reason the regulator API is
enabled on such a system it should assume that any supplies that devices
need are provided by the system at all relevant times without any software
intervention.

Tell the regulator core to make this assumption by calling
regulator_has_full_constraints(). Do this as soon as we know we are using
ACPI so that the information is available to the regulator core as early
as possible. This will cause the regulator core to pretend that there is
an always on regulator supplying any supply that is requested but that has
not otherwise been mapped which is the behaviour expected on a system with
ACPI.

Should the ability to specify regulators be added in future revisions of
ACPI then once we have support for ACPI mappings in the kernel the same
assumptions will apply. It is also likely that systems will default to a
mode of operation which does not require any interpretation of these
mappings in order to be compatible with existing operating system releases
so it should remain safe to make these assumptions even if the mappings
exist but are not supported by the kernel.

Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-28 22:37:22 +01:00
Rafael J. Wysocki
d1badf8d43 Merge branch 'acpi-pci-hotplug' into acpi-hotplug
Conflicts:
	include/acpi/acpi_bus.h
2013-12-31 13:41:08 +01:00
Rafael J. Wysocki
f244d8b623 ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug
The changes in the ACPI-based PCI hotplug (ACPIPHP) subsystem made
during the 3.12 development cycle uncovered a problem with VGA
switcheroo that on some systems, when the device-specific method
(ATPX in the radeon case, _DSM in the nouveau case) is used to turn
off the discrete graphics, the BIOS generates ACPI hotplug events for
that device and those events cause ACPIPHP to attempt to remove the
device from the system (they are events for a device that was present
previously and is not present any more, so that's what should be done
according to the spec).  Then, the system stops functioning correctly.

Since the hotplug events in question were simply silently ignored
previously, the least intrusive way to address that problem is to
make ACPIPHP ignore them again.  For this purpose, introduce a new
ACPI device flag, no_hotplug, and modify ACPIPHP to ignore hotplug
events for PCI devices whose ACPI companions have that flag set.
Next, make the radeon and nouveau switcheroo detection code set the
no_hotplug flag for the discrete graphics' ACPI companion.

Fixes: bbd34fcdd1 (ACPI / hotplug / PCI: Register all devices under the given bridge)
References: https://bugzilla.kernel.org/show_bug.cgi?id=61891
References: https://bugzilla.kernel.org/show_bug.cgi?id=64891
Reported-and-tested-by: Mike Lothian <mike@fireburn.co.uk>
Reported-and-tested-by: <madcatx@atlas.cz>
Reported-and-tested-by: Joaquín Aramendía <samsagax@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
2013-12-31 13:39:42 +01:00
Rafael J. Wysocki
9ccad66f01 Merge branch 'acpi-cleanup' into acpi-hotplug
Conflicts:
	drivers/acpi/scan.c
2013-12-07 01:05:17 +01:00
Lv Zheng
8b48463f89 ACPI: Clean up inclusions of ACPI header files
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.

First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds.  For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.

Second, there are ordering dependencies between those files that always
have to be met.  Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there.  And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds.  That also is taken care of including
<linux/acpi.h> as appropriate.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-07 01:03:14 +01:00
Rafael J. Wysocki
25db115b0b ACPI: Introduce acpi_set_device_status()
Introduce a static inline function for setting the status field
of struct acpi_device on the basis of a supplied u32 number,
acpi_set_device_status(), and use it instead of the horrible
horrible STRUCT_TO_INT() macro wherever applicable.  Having done
that, drop STRUCT_TO_INT() (and pretend that it has never existed).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-22 21:56:06 +01:00
Rafael J. Wysocki
f4b734c35e ACPI / hotplug: Drop unfinished global notification handling routines
There are two global hotplug notification handling routines in bus.c,
acpi_bus_check_device() and acpi_bus_check_scope(), that have never
been finished and don't do anything useful, so drop them.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-22 21:55:55 +01:00
Linus Torvalds
2f466d33f5 PCI changes for the v3.13 merge window:
Resource management
     - Fix host bridge window coalescing (Alexey Neyman)
     - Pass type, width, and prefetchability for window alignment (Wei Yang)
 
   PCI device hotplug
     - Convert acpiphp, acpiphp_ibm to dynamic debug (Lan Tianyu)
 
   Power management
     - Remove pci_pm_complete() (Liu Chuansheng)
 
   MSI
     - Fail initialization if device is not in PCI_D0 (Yijing Wang)
 
   MPS (Max Payload Size)
     - Use pcie_get_mps() and pcie_set_mps() to simplify code (Yijing Wang)
     - Use pcie_set_readrq() to simplify code (Yijing Wang)
     - Use cached pci_dev->pcie_mpss to simplify code (Yijing Wang)
 
   SR-IOV
     - Enable upstream bridges even for VFs on virtual buses (Bjorn Helgaas)
     - Use pci_is_root_bus() to avoid catching virtual buses (Wei Yang)
 
   Virtualization
     - Add x86 MSI masking ops (Konrad Rzeszutek Wilk)
 
   Freescale i.MX6
     - Support i.MX6 PCIe controller (Sean Cross)
     - Increase link startup timeout (Marek Vasut)
     - Probe PCIe in fs_initcall() (Marek Vasut)
     - Fix imprecise abort handler (Tim Harvey)
     - Remove redundant of_match_ptr (Sachin Kamat)
 
   Renesas R-Car
     - Support Gen2 internal PCIe controller (Valentine Barshak)
 
   Samsung Exynos
     - Add MSI support (Jingoo Han)
     - Turn off power when link fails (Jingoo Han)
     - Add Jingoo Han as maintainer (Jingoo Han)
     - Add clk_disable_unprepare() on error path (Wei Yongjun)
     - Remove redundant of_match_ptr (Sachin Kamat)
 
   Synopsys DesignWare
     - Add irq_create_mapping() (Pratyush Anand)
     - Add header guards (Seungwon Jeon)
 
   Miscellaneous
     - Enable native PCIe services by default on non-ACPI (Andrew Murray)
     - Cleanup _OSC usage and messages (Bjorn Helgaas)
     - Remove pcibios_last_bus boot option on non-x86 (Bjorn Helgaas)
     - Convert bus code to use bus_, drv_, and dev_groups (Greg Kroah-Hartman)
     - Remove unused pci_mem_start (Myron Stowe)
     - Make sysfs functions static (Sachin Kamat)
     - Warn on invalid return from driver probe (Stephen M. Cameron)
     - Remove Intel Haswell D3 delays (Todd E Brandt)
     - Call pci_set_master() in core if driver doesn't do it (Yinghai Lu)
     - Use pci_is_pcie() to simplify code (Yijing Wang)
     - Use PCIe capability accessors to simplify code (Yijing Wang)
     - Use cached pci_dev->pcie_cap to simplify code (Yijing Wang)
     - Removed unused "is_pcie" from struct pci_dev (Yijing Wang)
     - Simplify sysfs CPU affinity implementation (Yijing Wang))
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgUzsAAoJEFmIoMA60/r8wmsQAJhwmtkUYR2L4T1g9smAyjJz
 bLm5zoC6WdywFcbTpTBfsTrS1CHIQG5akRgkEXGdr99epiho5F2lwmagWsUR4ijL
 39Qn3knAUMgtNjoVXXI106h/DfTyxSmkZBfih2AQFyWobJq+0kg7hjQQA3+836b4
 8ssWr1+NSl6JJTqYQ0Paw1kSqvvYoXsu5rWFEfCHk8D0s/1bvr5ldAUpk2jTg93I
 uo9/5+O264yt1YoKZOMqAMZLUfd5DaWY1mV3yeF0Uauy1pBmol5csE8ckqJPDrES
 PRdJT1+PhBeLYWcgXANOBZsW58ddxA0pQ5jQV6VJHQWsm5cE82OBpYJf6xUZ2moV
 o6DZ0KRnCPVA3NllYYR16H+wbMfADwwO83QoA+QTIZJy/WgpDH3Cst+m8KePGqbL
 uFgDdXSws9Bs1BCFs7bfYzAM3OdkBFnn+ac7JoPXKP5ibgAp9nDlurgK2r90zRnp
 j15vHMx0mV+e8B8/iwiW5eRtg7NoCHYiNfFy7JalOlsPmYr2KFazBVKclp13Hng7
 fe/Jy6X4UhWoQPdqsy4ftvSQb0gm1MClxFJeZ3VAt6LY9j8OP6S/Vdf6lpAL85KR
 lAQoQzB+lOhTPdXxFY2xgGkITkqPDOQMjPfowYUYFwybqBuG6BHXZPJobL+niBlb
 Nh+M2WlUUA9Z3V6rWJB6
 =CTPk
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Resource management
    - Fix host bridge window coalescing (Alexey Neyman)
    - Pass type, width, and prefetchability for window alignment (Wei Yang)

  PCI device hotplug
    - Convert acpiphp, acpiphp_ibm to dynamic debug (Lan Tianyu)

  Power management
    - Remove pci_pm_complete() (Liu Chuansheng)

  MSI
    - Fail initialization if device is not in PCI_D0 (Yijing Wang)

  MPS (Max Payload Size)
    - Use pcie_get_mps() and pcie_set_mps() to simplify code (Yijing Wang)
    - Use pcie_set_readrq() to simplify code (Yijing Wang)
    - Use cached pci_dev->pcie_mpss to simplify code (Yijing Wang)

  SR-IOV
    - Enable upstream bridges even for VFs on virtual buses (Bjorn Helgaas)
    - Use pci_is_root_bus() to avoid catching virtual buses (Wei Yang)

  Virtualization
    - Add x86 MSI masking ops (Konrad Rzeszutek Wilk)

  Freescale i.MX6
    - Support i.MX6 PCIe controller (Sean Cross)
    - Increase link startup timeout (Marek Vasut)
    - Probe PCIe in fs_initcall() (Marek Vasut)
    - Fix imprecise abort handler (Tim Harvey)
    - Remove redundant of_match_ptr (Sachin Kamat)

  Renesas R-Car
    - Support Gen2 internal PCIe controller (Valentine Barshak)

  Samsung Exynos
    - Add MSI support (Jingoo Han)
    - Turn off power when link fails (Jingoo Han)
    - Add Jingoo Han as maintainer (Jingoo Han)
    - Add clk_disable_unprepare() on error path (Wei Yongjun)
    - Remove redundant of_match_ptr (Sachin Kamat)

  Synopsys DesignWare
    - Add irq_create_mapping() (Pratyush Anand)
    - Add header guards (Seungwon Jeon)

  Miscellaneous
    - Enable native PCIe services by default on non-ACPI (Andrew Murray)
    - Cleanup _OSC usage and messages (Bjorn Helgaas)
    - Remove pcibios_last_bus boot option on non-x86 (Bjorn Helgaas)
    - Convert bus code to use bus_, drv_, and dev_groups (Greg Kroah-Hartman)
    - Remove unused pci_mem_start (Myron Stowe)
    - Make sysfs functions static (Sachin Kamat)
    - Warn on invalid return from driver probe (Stephen M. Cameron)
    - Remove Intel Haswell D3 delays (Todd E Brandt)
    - Call pci_set_master() in core if driver doesn't do it (Yinghai Lu)
    - Use pci_is_pcie() to simplify code (Yijing Wang)
    - Use PCIe capability accessors to simplify code (Yijing Wang)
    - Use cached pci_dev->pcie_cap to simplify code (Yijing Wang)
    - Removed unused "is_pcie" from struct pci_dev (Yijing Wang)
    - Simplify sysfs CPU affinity implementation (Yijing Wang)"

* tag 'pci-v3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (79 commits)
  PCI: Enable upstream bridges even for VFs on virtual buses
  PCI: Add pci_upstream_bridge()
  PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()
  PCI: Warn on driver probe return value greater than zero
  PCI: Drop warning about drivers that don't use pci_set_master()
  PCI: Workaround missing pci_set_master in pci drivers
  powerpc/pci: Use pci_is_pcie() to simplify code [fix]
  PCI: Update pcie_ports 'auto' behavior for non-ACPI platforms
  PCI: imx6: Probe the PCIe in fs_initcall()
  PCI: Add R-Car Gen2 internal PCI support
  PCI: imx6: Remove redundant of_match_ptr
  PCI: Report pci_pme_active() kmalloc failure
  mn10300/PCI: Remove useless pcibios_last_bus
  frv/PCI: Remove pcibios_last_bus
  PCI: imx6: Increase link startup timeout
  PCI: exynos: Remove redundant of_match_ptr
  PCI: imx6: Fix imprecise abort handler
  PCI: Fail MSI/MSI-X initialization if device is not in PCI_D0
  PCI: imx6: Remove redundant dev_err() in imx6_pcie_probe()
  x86/PCI: Coalesce multiple overlapping host bridge windows
  ...
2013-11-14 14:02:00 +09:00
Chen, Gong
4b3db708b1 ACPI, x86: Extended error log driver for x86 platform
This H/W error log driver (a.k.a eMCA driver) is implemented based on
http://www.intel.com/content/www/us/en/architecture-and-technology/enhanced-mca-logging-xeon-paper.html

After errors are captured, more detailed platform specific information
can be got via this new enhanced H/W error log driver. Most notably we
can track memory errors back to the DIMM slot silk screen label.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-23 10:09:07 -07:00
Bjorn Helgaas
b938a229c8 ACPI: Rename OSC_QUERY_TYPE to OSC_QUERY_DWORD
OSC_QUERY_TYPE isn't a "type"; it's an index into the _OSC Capabilities
Buffer of DWORDs.  Rename OSC_QUERY_TYPE, OSC_SUPPORT_TYPE, and
OSC_CONTROL_TYPE to OSC_QUERY_DWORD, etc., to make this clear.
No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-23 17:40:45 -06:00
Rafael J. Wysocki
0c581415b5 Merge branch 'acpi-assorted'
* acpi-assorted:
  ACPI / osl: Kill macro INVALID_TABLE().
  earlycpio.c: Fix the confusing comment of find_cpio_data().
  ACPI / x86: Print Hot-Pluggable Field in SRAT.
  ACPI / thermal: Use THERMAL_TRIPS_NONE macro to replace number
  ACPI / thermal: Remove unused macros in the driver/acpi/thermal.c
  ACPI / thermal: Remove the unused lock of struct acpi_thermal
  ACPI / osl: Fix osi_setup_entries[] __initdata attribute location
  ACPI / numa: Fix __init attribute location in slit_valid()
  ACPI / dock: Fix __init attribute location in find_dock_and_bay()
  ACPI / Sleep: Fix incorrect placement of __initdata
  ACPI / processor: Fix incorrect placement of __initdata
  ACPI / EC: Fix incorrect placement of __initdata
  ACPI / scan: Drop unnecessary label from acpi_create_platform_device()
  ACPI: Move acpi_bus_get_device() from bus.c to scan.c
  ACPI / scan: Allow platform device creation without any IO resources
  ACPI: Cleanup sparse warning on acpi_os_initialize1()
  platform / thinkpad: Remove deprecated hotkey_report_mode parameter
  ACPI: Remove the old /proc/acpi/event interface
2013-08-27 01:29:04 +02:00
Rafael J. Wysocki
caf5c03f17 ACPI: Move acpi_bus_get_device() from bus.c to scan.c
Move acpi_bus_get_device() from bus.c to scan.c which allows
acpi_bus_data_handler() to become static and clean up the latter.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-06 14:12:22 +02:00
Lv Zheng
1129c92faa ACPI: Cleanup sparse warning on acpi_os_initialize1()
This patch cleans up the following sparse warning:

# make C=2 drivers/acpi/osl.o
...
drivers/acpi/osl.c:1775:20: warning: symbol 'acpi_os_initialize1' was not declared. Should it be static?
...
  CC      drivers/acpi/osl.o

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-26 00:36:00 +02:00
Thomas Renninger
1696d9dc57 ACPI: Remove the old /proc/acpi/event interface
It is quite some time that this one has been deprecated.
Get rid of it.

Should some really important user be overseen, it may be reverted and
the userspace program worked on first, but it is time to do something
to get rid of this old stuff...

Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-15 13:56:36 +02:00
Rafael J. Wysocki
f716fc2ac0 ACPI: Drop ACPI bus notifier call chain
There are no users of the ACPI bus notifier call chain,
acpi_bus_notify_list, any more, so drop it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-15 01:33:11 +02:00
Jiang Liu
0db9820260 ACPI: introduce helper function acpi_execute_simple_method()
Introduce helper function acpi_execute_simple_method() and use it in
a number of places to simplify code.

[rjw: Changelog]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-15 01:33:10 +02:00
Bjorn Helgaas
6a8c0af6e2 ACPI: Remove useless initializers
These local variables are all initialized at their first use, so there's
no point in initializing them earlier.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-19 23:34:58 +02:00
Andrei Epure
e2cb5f0846 ACPI: replace kmalloc+memcpy with kmemdup
Replace the combination of kmalloc() and memcpy() in acpi_run_osc()
with a single call to kmemdup().

[rjw: Changelog]
Signed-off-by: Andrei Epure <epure.andrei@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-24 23:31:33 +01:00
Rafael J. Wysocki
9ce4e60711 ACPI / PM: Move device power management functions to device_pm.c
Move ACPI device power management functions from drivers/acpi/bus.c
to drivers/acpi/device_pm.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-19 22:09:22 +01:00
Rafael J. Wysocki
96bfd3cee2 ACPI / PM: Common string representations of device power states
The function returning string representations of ACPI device power
states, state_string((), is now static, because it is only used
internally in drivers/acpi/bus.c.  However, it will be used outside
of that file going forward, so rename it to
acpi_power_state_string(), add a kerneldoc comment to it and add its
header to acpi_bus.h.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17 14:11:08 +01:00
Rafael J. Wysocki
ad0c3b0e48 ACPI / PM: More visible function for retrieving device power states
The function used for retrieving ACPI device power states,
__acpi_bus_get_power(), is now static, because it is only used
internally in drivers/acpi/bus.c.  However, it will be used
outside of that file going forward, so rename it to
acpi_device_get_power(), in analogy with acpi_device_set_power(),
add a kerneldoc comment to it and add its header to acpi_bus.h.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17 14:11:08 +01:00
Rafael J. Wysocki
ff0c41942f ACPI / PM: Change the way power transitions to D3cold are carried out
During power transitions into D3cold from any shallower power states
we are supposed to transition the device into D3hot and remove power
from it afterward, but the current code in acpi_device_set_power()
doesn't work this way.

At the same time, though, we need to be careful enough to preserve
backwards compatibility for systems that don't distinguish between
D3hot and D3cold (e.g. designed before ACPI 4).

Modify acpi_device_set_power() so that it works in accordance with
the expectations in both cases.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-17 14:11:08 +01:00
Lv Zheng
ddc150f7a3 ACPI / PM: Add check preventing transitioning to non-D0 state from D3.
No power transitioning from D3 state up to a non-D0 state is allowed
so make acpi_device_set_power() fail and complain if such a transition
is attempted.

Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-16 02:46:28 +01:00
Rafael J. Wysocki
078eb12648 ACPI / PM: Provide device PM functions operating on struct acpi_device
If the caller of acpi_bus_set_power() already has a pointer to the
struct acpi_device object corresponding to the device in question, it
doesn't make sense for it to go through acpi_bus_get_device(), which
may be costly, because it involves acquiring the global ACPI
namespace mutex.

For this reason, export the function operating on struct acpi_device
objects used internally by acpi_bus_set_power(), so that it may be
called instead of acpi_bus_set_power() in the above case, and change
its name to acpi_device_set_power().

Additionally, introduce two inline wrappers for checking ACPI PM
capabilities of devices represented by struct acpi_device objects.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:15:18 +01:00