Commit Graph

19 Commits

Author SHA1 Message Date
Marek Szyprowski
726b6324e3 mmc: pwrseq: add driver for emmc hardware reset
This patch provides a simple mmc-pwrseq-emmc driver, which controls
single gpio line. It perform standard eMMC hw reset procedure, as
descibed by Jedec 4.4 specification. This procedure is performed just
after MMC core enabled power to the given mmc host (to fix possible
issues if bootloader has left eMMC card in initialized or unknown
state), and before performing complete system reboot (also in case of
emergency reboot call). The latter is needed on boards, which doesn't
have hardware reset logic connected to emmc card and (limited or broken)
ROM bootloaders are unable to read second stage from the emmc card if
the card is left in unknown or already initialized state.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-02-04 09:45:09 +01:00
Ulf Hansson
8c96f89c62 mmc: pwrseq: Initial support for the simple MMC power sequence provider
To add the core part for the MMC power sequence, let's start by adding
initial support for the simple MMC power sequence provider.

In this initial step, the MMC power sequence node are fetched and the
compatible string for the simple MMC power sequence provider are
verified.

At this point we don't parse the node for any properties, but instead
that will be handled from following patches. Since there are no
properties supported yet, let's just implement the ->alloc() and the
->free() callbacks.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2015-01-28 12:32:07 +01:00
Ulf Hansson
3aa8793f75 mmc: core: Initial support for MMC power sequences
System on chip designs may specify a specific MMC power sequence. To
successfully detect an (e)MMC/SD/SDIO card, that power sequence must
be followed while initializing the card.

To be able to handle these SOC specific power sequences, let's add a
MMC power sequence interface. It provides the following functions to
help the mmc core to deal with these power sequences.

mmc_pwrseq_alloc() - Invoked from mmc_of_parse(), to initialize data.
mmc_pwrseq_pre_power_on()- Invoked in the beginning of mmc_power_up().
mmc_pwrseq_post_power_on()- Invoked at the end in mmc_power_up().
mmc_pwrseq_power_off()- Invoked from mmc_power_off().
mmc_pwrseq_free() - Invoked from mmc_free_host(), to free data.

Each MMC power sequence provider will be responsible to implement a set
of callbacks. These callbacks mirrors the functions above.

This patch adds the skeleton, following patches will extend the core of
the MMC power sequence and add support for a specific simple MMC power
sequence.

Do note, since the mmc_pwrseq_alloc() is invoked from mmc_of_parse(),
host drivers needs to make use of this API to enable the support for
MMC power sequences. Moreover the MMC power sequence support depends on
CONFIG_OF.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2015-01-28 12:31:12 +01:00
Guennadi Liakhovetski
fd0ea65d3e mmc: extend and rename cd-gpio helpers to handle more slot GPIO functions
GPIOs can be used in MMC/SD-card slots not only for hotplug detection, but
also to implement the write-protection pin. Rename cd-gpio helpers to
slot-gpio to make addition of further slot GPIO functions possible.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-10 23:04:04 -04:00
Guennadi Liakhovetski
349ab52446 mmc: add a generic GPIO card-detect helper
This patch adds a primitive helper to support card hotplug detection on
platforms, where a GPIO, capable of producing interrupts, is used for
detection of card-insertion and -removal events.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:45 -05:00
Pierre Tardy
57f0adc7ea mmc: add per device quirk placeholder
Some cards have quirks valid for every platforms using current
platform quirk hooks leads to a lot of code and debug duplication.

So we inspire a bit from what exists in PCI subsystem and do our own
per vendorid/deviceid quirk.  We still drop the complexity of the pci
quirk system (with special section tables, and so on).
That can be added later if needed.

Signed-off-by: Pierre Tardy <pierre.tardy@intel.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15 13:48:33 -04:00
matt mooney
d3c502b84f mmc: Makefile: Fix EXTRA_CFLAGS assignment
The EXTRA_CFLAGS assignment in mmc/Makefile was not accomplishing
anything because this flag only has effect on sources at the same level
as the makefile (i.e., per directory). Since card/, core/, and host/
rely on MMC_DEBUG, the subdir-ccflags-y variant seems to be the
appropriate choice.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:15 +08:00
Haavard Skinnemoen
6edd8ee60a mmc: Export internal host state through debugfs
When CONFIG_DEBUG_FS is set, create a few files under /sys/kernel/debug
containing information about an mmc host's internal state. Currently,
just a single file is created, "ios", which contains information about
the current operating parameters for the bus (clock speed, bus width,
etc.)

Host drivers can add additional files and directories under the host's
root directory by passing the debugfs_root field in struct mmc_host as
the 'parent' parameter to debugfs_create_*.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27 01:26:16 +02:00
Pierre Ossman
51ec92e295 mmc: use sysfs groups to handle conditional attributes
Suppressing uevents turned out to be a bad idea as it screws up the
order of events, making user space very confused. Change the system to
use sysfs groups instead.

This is a regression that, for some odd reason, has gone unnoticed for
some time. It confuses hal so that the block devices (which have the
mmc device as a parent) are not registered. End result being that
desktop magic when cards are inserted won't work.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-22 17:02:20 -07:00
Nicolas Pitre
d1496c39e5 sdio: core support for SDIO function interrupt
Signed-off-by: Nicolas Pitre <npitre@mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 21:01:33 +02:00
Nicolas Pitre
b726126196 sdio: initial CIS parsing code
Signed-off-by: Nicolas Pitre <npitre@mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 20:26:42 +02:00
Pierre Ossman
46f555f273 mmc: add basic SDIO I/O operations
Add command wrappers that simplify register access from SDIO
function drivers.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 19:57:03 +02:00
Pierre Ossman
e29a7d73f4 mmc: basic SDIO device model
Add the sdio bus type and basic device handling.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 19:45:31 +02:00
Pierre Ossman
5c4e6f1301 mmc: detect SDIO cards
Really basic init sequence for SDIO cards.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 19:40:07 +02:00
Pierre Ossman
b93931a61a mmc: refactor host class handling
Move basic host class device handling to its own file for clarity.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09 21:28:01 +02:00
Pierre Ossman
4101c16a91 mmc: refactor bus operations
Move bus operations to its own file for the sake of clarity. Also
delegate sysfs attributes to bus handlers in preparation for other
more exotic types.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09 21:27:56 +02:00
Pierre Ossman
7ea239d9e6 mmc: add bus handler
Delegate protocol handling to "bus handlers". This allows the core to
just handle the task of arbitrating the bus. Initialisation and
pampering of cards is now done by the different bus handlers.

This design also allows MMC and SD (and later SDIO) to be more cleanly
separated, allowing easier maintenance.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 13:41:06 +02:00
Pierre Ossman
da7fbe58d2 mmc: Separate out protocol ops
Move protocol operations and definitions into their own files
in an effort to separate protocol handling and bus
arbitration more clearly.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 13:04:18 +02:00
Pierre Ossman
aaac1b470b mmc: Move core functions to subdir
Create a "core" subdirectory to house the central bus handling
functions.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 13:04:18 +02:00