Commit Graph

216 Commits

Author SHA1 Message Date
Divy Le Ray
56c8f14071 cxgb3: minor aq100x phy fixes
Use generic MDIO generic values.
Based on Ben Hutchings'review comments.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03 21:01:50 -07:00
Divy Le Ray
6ba5f9c743 cxgb3: Update FW to 7.4.0
Update FW to 7.4.
Bump up driver revision.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03 21:01:50 -07:00
David S. Miller
b2f8f7525c Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/forcedeth.c
2009-06-03 02:43:41 -07:00
Divy Le Ray
f22a563b0a cxgb3: add support for the Aquantia 10G-BT phy
Add support for the Aquantia AQ1002 10G-BaseT phy.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 15:55:05 -07:00
Divy Le Ray
744514249f cxgb3: Add Aeluros 2020 phy support
Add support for the AEL2020 phy.
Add PCI IDs of the boards using this phy.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 15:55:04 -07:00
Divy Le Ray
c3a8c5b644 cxgb3: move away from LLTX
cxgb3 no longer advertizes LLTX.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 15:55:03 -07:00
Divy Le Ray
c22c814931 cxgb3: link fault fixes
Do not call t3_link_fault() under spinlock, as it calls msleep().
Besides, only the access to pi->link_fault needs to be serialized.

Also initialize local variables before checking the link status,
link state fields might otherwise end up containing garbage.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 01:54:41 -07:00
Divy Le Ray
10b6d95612 cxgb3: fix dma mapping regression
Commit 5e68b772e6
  cxgb3: map entire Rx page, feed map+offset to Rx ring.

introduced a regression on platforms defining DECLARE_PCI_UNMAP_ADDR()
and related macros as no-ops.

Rx descriptors are fed with the a page buffer bus address + page chunk offset.
The page buffer bus address is set and retrieved through
pci_unamp_addr_set(), pci_unmap_addr().
These functions being meaningless on x86 (if CONFIG_DMA_API_DEBUG is not set).
The HW ends up with a bogus bus address.

This patch saves the page buffer bus address for all plaftorms.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 01:54:37 -07:00
Eric Dumazet
28679751a9 net: dont update dev->trans_start in 10GB drivers
Followup of commits 9d21493b4b
and 08baf56108
(net: tx scalability works : trans_start)
(net: txq_trans_update() helper)

Now that core network takes care of trans_start updates, dont do it
in drivers themselves, if possible. Multi queue drivers can
avoid one cache miss (on dev->trans_start) in their start_xmit()
handler.

Exceptions are NETIF_F_LLTX drivers (vxge & tehuti)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 01:46:26 -07:00
Divy Le Ray
86c890ab1b cxgb3: set phy's mdio dev before the phy init sequence
mdio's dev field needs to be set before mdio ops occur.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-20 20:51:58 -07:00
Ben Hutchings
64318334bf cxgb3: Use generic XENPAK LASI register definitions
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-20 20:51:58 -07:00
David S. Miller
d252a5e7b7 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2009-05-03 14:07:43 -07:00
Sergey Senozhatsky
00b64f2aa5 cxgb3: fixing gcc 4.4 compiler warning: suggest parentheses around operand of ‘!’
Trivial: fixing gcc 4.4 compiler warning:
drivers/net/cxgb3/t3_hw.c: In function ‘t3_prep_adapter’:
drivers/net/cxgb3/t3_hw.c:3782: warning: suggest parentheses around operand of ‘!’ or change ‘|’ to ‘||’ or ‘!’ to ‘~’

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@mail.by>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 09:15:09 -07:00
Ben Hutchings
0f07c4ee8c cxgb3: Use generic MDIO definitions and mdio_mii_ioctl()
Compile-tested only.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-29 17:32:32 -07:00
David S. Miller
e5e9743bb7 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	net/core/dev.c
2009-04-21 01:32:26 -07:00
Divy Le Ray
e8d1937073 cxgb3: Fix EEH final recovery attempt
EEH attempts to recover up 6 times.
The last attempt leaves all the ports and adapter down.hen
The driver is then unloaded, bringing the adapter down again
unconditionally. The unload will hang.
Check if the adapter is already down before trying to bring it down again.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-20 02:07:27 -07:00
Divy Le Ray
2c2f409f32 cxgb3: Fix potential msi-x vector leak
Release vectors when a MSI-X allocation fails.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-20 02:07:25 -07:00
Divy Le Ray
c80b0c28ca cxgb3: fix workqueue flush issues
The fatal error task can be scheduled while processing an offload packet
in NAPI context when the connection handle is bogus. this can race
with the ports being brought down and the cxgb3 workqueue being flushed.
Stop napi processing before flushing the work queue.

The ULP drivers (iSCSI, iWARP) might also schedule a task on keventd_wk
while releasing a connection handle (cxgb3_offload.c::cxgb3_queue_tid_release()).
The driver however does not flush any work on keventd_wq while being unloaded.
This patch also fixes this.

Also call cancel_delayed_work_sync in place of the the deprecated
cancel_rearming_delayed_workqueue.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-20 02:07:24 -07:00
Divy Le Ray
3851c66cf0 cxgb3: fix link fault handling
Use the existing periodic task to handle link faults.
The link fault interrupt handler is also called in work queue context,
which is wrong and might cause potential deadlocks.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-20 02:07:23 -07:00
Herbert Xu
76620aafd6 gro: New frags interface to avoid copying shinfo
It turns out that copying a 16-byte area at ~800k times a second
can be really expensive :) This patch redesigns the frags GRO
interface to avoid copying that area twice.

The two disciples of the frags interface have been converted.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-16 02:02:07 -07:00
Yang Hongyang
284901a90a dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:11 -07:00
Yang Hongyang
6a35528a83 dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:10 -07:00
Divy Le Ray
5e68b772e6 cxgb3: map entire Rx page, feed map+offset to Rx ring.
DMA mapping can be expensive in the presence of iommus.
Reduce the Rx iommu activity by mapping an entire page, and provide the H/W
the mapped address + offset of the current page chunk.
Reserve bits at the end of the page to track mapping references, so the page
can be unmapped.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:46:59 -07:00
Divy Le Ray
952cdf333f cxgb3: differentiate portx and Tx channels
Separate ports from H/W Tx channels.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:46:58 -07:00
Divy Le Ray
68f40c1029 cxgb3: use resource_size_t for mmio declarations
Use resource_size_t to declare mmio start and len variables.
Print PEX error register after EEH resumed.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:46:58 -07:00
Divy Le Ray
3fa58c883d cxgb3: sge setup fixes
Enable timestamps, update delayed ack threshold for iSCSI/iWARP traffic
Remove the len flag in Tx requests. It might corrupt offload trace packets.
Update SGE context setup to avoid potential H/W misprogrammation.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:46:57 -07:00
Divy Le Ray
3156378993 cxgb3: start qset timers when setup succeeded
Start queue set reclaim timers after the queue sets have been
allocated successfully.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:46:56 -07:00
Divy Le Ray
3bcb1255ba cxgb3: update driver version
update driver version to 1.1.1-ko

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:49 -07:00
Divy Le Ray
d9507a532a cxgb3: update FW
Update FW to 7.1

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:48 -07:00
Divy Le Ray
bf792094ef cxgb3: detect mac link faults.
The driver currently ignores the local or remote link faults
raised at the mac layer. This patch fixes it.
Our mac however only advertizes link events, so wait for the
phy to stabilize the link, then enable mac link events interrupts.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:47 -07:00
Divy Le Ray
cd40658a61 cxgb3: Update Rev3 mac workaround
Update the heurstics workaround unlocking a hung mac:
- reduce Tx mac toggling by enabling Tx drain before resetting the mac
- Take Tx (lack of) activity in account only
- Update the monitoring counter range to 64 bits

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:46 -07:00
Divy Le Ray
fc88219601 cxgb3: disable high freq non-data interrupts
Under RX pressure, The HW might generate a high load of interrupts
to signal mac fifo or free lists overflow.
Disable the interrupts, and poll the relevant status bits
to maintain stats.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:45 -07:00
Divy Le Ray
42c8ea17e8 cxgb3: separate TX and RX reclaim handlers
Separate TX and RX reclaim handlers
Don't disable interrupts in RX reclaim handler.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:45 -07:00
Divy Le Ray
b2b964f064 cxgb3: prefetch buffer access in GRO mode
Elmininate a cache miss when accessing the CPL header within
the first aggregated buffer.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:44 -07:00
Divy Le Ray
8f4358044d cxgb3: fix skb truesize in jumbo mode
Update skb truesize correctly for the 2nd buffer from a Jumbo frame

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:44 -07:00
Divy Le Ray
9bb2b31e6f cxgb3: release page ref on mapping error
Release page chunk reference in case we fail to map it.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:43 -07:00
Divy Le Ray
26b3871d2c cxgb3: ring rx door bell less frequently
Ring free lists door bell less frequently,
specifically every quarter of the active FL
size.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:43 -07:00
David S. Miller
e70049b9e7 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2009-02-24 03:50:29 -08:00
Divy Le Ray
ce03aaddd4 cxgb3: Add support for PCI ID 0x35.
Add support for adapters with a PCI id equal to 0x35.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-18 17:47:57 -08:00
Hannes Eder
a243f848ce drivers/net/cxgb3: fix sparse warnings: fix signedness
Fix this sparse warning:
  drivers/net/cxgb3/ael1002.c:1010:60: warning: incorrect type in argument 4 (different signedness)

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-17 17:26:10 -08:00
Hannes Eder
97915b5bf6 drivers/net/cxgb3: fix sparse warning: symbol shadows an earlier one
Impact: Move variable declaration as close to usage as possible.

Fix this sparse warning:
  drivers/net/cxgb3/cxgb3_main.c:1586:21: warning: symbol 'cap' shadows an earlier one

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-17 17:26:09 -08:00
David S. Miller
7870389478 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2009-02-04 16:52:41 -08:00
Divy Le Ray
65ab8385b6 cxgb3: Fix lro switch
The LRO switch is always set to 1 in the rx processing loop.
It breaks the accelerated iSCSI receive traffic.
Fix its computation.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-04 16:31:39 -08:00
David S. Miller
0c8dfc830a net: Add skb_record_rx_queue() calls to multiqueue capable drivers.
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-27 16:22:32 -08:00
Divy Le Ray
cb0bc20595 cxgb3: Notify fatal errors
Set up a notification mechanism to inform upper layer modules
(iWARP, iSCSI) of a chip reset due to an EEH event or a fatal error.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26 22:21:59 -08:00
Herbert Xu
7be2df451f cxgb3: Replace LRO with GRO
This patch makes cxgb3 invoke the GRO hooks instead of LRO.  As
GRO has a compatible external interface to LRO this is a very
straightforward replacement.

I've kept the ioctl controls for per-queue LRO switches.  However,
we should not encourage anyone to use these.

Because of that, I've also kept the skb construction code in
cxgb3.  Hopefully we can phase out those per-queue switches
and then kill this too.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 14:39:13 -08:00
Divy Le Ray
5cda9364f1 cxgb3: ease msi-x settings conditions
The driver currently drops to line interrupt mode
if it did not get all the msi-x vectors it requested.

Allow msi-x settings when a minimal amount of vectors
is provided.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 14:34:03 -08:00
Divy Le Ray
eed087e367 cxgb3: Fix LRO misalignment
The lro manager's frag_align_pad setting was missing,
leading to misaligned access to the skb passed up
to the stack.

Tested-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19 16:20:16 -08:00
Roland Dreier
47fd23fe8e cxgb3: Keep LRO off if disabled when interface is down
I have a system with a Chelsio adapter (driven by cxgb3) whose ports are
part of a Linux bridge.  Recently I updated the kernel and discovered
that things stopped working because cxgb3 was doing LRO on packets that
were passed into the bridge code for forwarding.  (Incidentally, this
problem manifested itself in a strange way that made debugging a bit
interesting -- for some reason, the skb_warn_if_lro() check in bridge
didn't trigger and these LROed packets were forwarded out a forcedeth
interface, and caused the forcedeth transmit path to get stuck)

This is because cxgb3 has no way of keeping state for the LRO flag until
the interface is brought up, so if the bridging code disables LRO while
the interface is down, then cxgb3_up() will just reenable LRO, and on my
Debian system at least, the init scripts add interfaces to a bridge
before bringing the interfaces up.

Fix this by keeping track of each interface's LRO state in cxgb3 so that
when bridge disables LRO, it stays disabled in cxgb3_up() when the
interface is brought up.  I did this by changing the rx_csum_offload
flag into a pair of bit flags; the effect of this on the rx_eth() fast
path is miniscule enough that it should be fine (eg on x86, a cmpb
instruction becomes a testb instruction).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:19:36 -08:00
Divy Le Ray
4d8cd00260 cxgb3: add control to access embedded images
Update contol path between cxgb3 and ULP modules (iWARP, iSCSI)
to provide access to firware and protocol engine info.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26 01:16:39 -08:00