Commit Graph

303 Commits

Author SHA1 Message Date
Nobuhiro Iwamatsu
ba087e6f69 sh: Add media/soc_camera.h to board setup of Renesas AP325RXA
Other compilation errors were revised by commit of
"sh: ap325rxa: Revert ov772x support"
(08c2f5b4d7) but other compilation
errors are given.
We revert this commit and need to add new header(media/soc_camera.h).
This change revises new compilation error.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10 15:20:54 +09:00
Paul Mundt
08c2f5b4d7 sh: ap325rxa: Revert ov772x support.
This change depends on some v4l changes that have been pushed back to
2.6.30, so drop this and fall back on the old soc_camera code until then.

Reported-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Acked-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27 15:41:14 +09:00
Kuninori Morimoto
7a65d245fa sh: ap325rxa: Add ov772x support.
This patch add ov772x camera settings to ap325,
Old camera is still supported. And it will be 2nd camera
if you select ov772x and soc_camera_platform in same time.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29 11:56:02 +09:00
Kuninori Morimoto
86746284e2 sh: ap325rxa: control camera power toggling.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29 11:56:02 +09:00
Paul Mundt
604437f0f8 sh: sh7785lcr/highlander/hp6xx need linux/irq.h.
More build fixes..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:43:25 +09:00
Magnus Damm
70e5c4f084 sh: Migo-R MMC support using spi_gpio and mmc_spi.
This patch adds CN9 MMC support for MigoR using the mmc_spi
driver on top of the bitbanging spi_gpio driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:43:23 +09:00
Magnus Damm
fbdd9a70c2 sh: ap325rxa MMC support using spi_gpio and mmc_spi
This patch adds CN3 MMC support for ap325rxa using the mmc_spi
driver on top of the bitbanging spi_gpio driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:43:15 +09:00
Paul Mundt
10f0fc17f5 sh: mach-x3proto: needs linux/irq.h.
Since commit ba84be2338
("remove linux/hardirq.h from asm-generic/local.h"), the asm/irq.h
definitions that mach-x3proto/setup.c depends on are no longer available,
causing the build to die. So, include linux/irq.h explicitly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:42:58 +09:00
Steve Glendinning
8ed3592e56 sh: convert rsk7203 to use smsc911x.
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:42:34 +09:00
Steve Glendinning
02da916ae6 sh: convert magicpanelr2 platform to use smsc911x.
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:42:25 +09:00
Steve Glendinning
90b764916a sh: convert ap325rxa platform to use smsc911x.
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:42:21 +09:00
Kuninori Morimoto
deae7b860a sh: mach-migor: Add tw9910 support.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:41:55 +09:00
Kuninori Morimoto
b9afb0bae5 sh: mach-migor: Delete soc_camera_platform setup.
Migo-R can use ov772x camera driver in Linux 2.6.29.
Therefore, soc_camera_platform setting is no longer needed.
This patch removes it.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:41:52 +09:00
Kuninori Morimoto
ff04ea40ea sh: mach-migor: Add ov772x support.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:41:28 +09:00
Paul Mundt
2ea40dec26 sh: mach-sh03: Fix up pata_platform build breakage.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:49 +09:00
Magnus Damm
b5868e8cde sh: enable deferred io LCDC on Migo-R
Enable LCDC deferred io on Migo-R using 1s delay.

As with other deferred io frame buffers user space code should
use fsync() on the frame buffer device to trigger an update.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:49 +09:00
Magnus Damm
0790555437 sh: add LCDC interrupt configuration to AP325 and Migo-R
Add LCDC interrupt resources for AP325 and Migo-R. The LCDC driver does
not require interrupts at this point, but changes such as one-shot SYS
mode using deferred io, and wait-for-vblank will both need this.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:48 +09:00
Paul Mundt
073da9c0de sh: Kill off cf-enabler with extreme prejudice.
Now that the rest of the boards that were using cf-enabler "generically"
have switched to setting up their mappings on their own, only the mach-se
boards were left using it. All of the cf-enabler using mach-se boards
use a special initialization of the MRSHPC windows rather than going
through the special PTE as other SH-4 platforms do. This consolidates
the MRSHPC setup logic, hooks it up on the boards that care, and gets rid
of any and all remaining references to cf-enabler.

This has been long overdue, as cf-enabler has been the bane of
arch/sh/kernel for the last 7 years. Good riddance.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:46 +09:00
Paul Mundt
866ef8f48f sh: mach-edosk7705: Fix up edosk7705 so it all builds again.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Paul Mundt
0ef0e6ca42 sh: mach-microdev: Split out the fdc37c93xapm initialization code.
This makes the microdev code a bit more readable, and moves the
setup for the SuperIO out on its own.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Paul Mundt
43eeb0fb9f sh: mach-sh03: Use __set_io_port_base(), kill off special ioport_map().
This also fixes up a long-standing bug for this platform where the PIO
base was set to a register offset, rather than the actual PIO offset
itself.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Paul Mundt
8db806ec80 sh: mach-sh03: Move off of cf_enabler to pata_platform, as per landisk.
This gets rid of the cf enabler use on mach-sh03 and switches to use
pata_platform with the proper address directly. cf_enabler is
subsequently disabled for mach-sh03.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Paul Mundt
98a955da85 sh: board-shmin: Convert shmin to use __set_io_port_base().
Drop the special mv_ioport_map() implementation, as this can simply use
__set_io_port_base() directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:45 +09:00
Paul Mundt
b94ea27570 sh: Kill off the cayman and microdev special heartbeat code.
These can use the generic code instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:44 +09:00
Matt Fleming
1a94757fae sh: Convert Cayman boards from hw_interrupt_type to irq_chip
I've been unable to even compile-test this change because I don't have
an sh5 toolchain. All uses of hw_interrupt_type for SuperH boards have
now been converted to use irq_chip.

Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:06 +09:00
Matt Fleming
e85a47744b sh: Convert Dreamcast support from hw_interrupt_type to irq_chip
Switch the dreamcast IRQ code over to the irq_chip way of doing things,
so that we can set GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH boards.

Also, whilst I'm here change some things to make checkpatch.pl happy:
	- Indent with tabs, not with spaces
	- Include <linux/io.h>, not <asm/io.h>
	- Fix the multi-line comment style
	- Fix some typos in the comments

Tested-by: Adrian McMenamin <adrian@newgolddream.dyndns.info>
Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:06 +09:00
Matt Fleming
bd0a22d21f sh: Convert SystemH board support from hw_interrupt_type to irq_chip
... as part of the hw_interrupt_type to irq_chip crusade.

Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:05 +09:00
Matt Fleming
be729fd890 sh: Convert Microdev boards from hw_interrupt_type to irq_chip
This is part of the SH move to irq_chip.

Signed-off-by: Matt Fleming <mjf@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:05 +09:00
Paul Mundt
4eec8834f0 sh: mach-migor: Kill off unused Migo-R machvec.
This kills off the special Migo-R machvec, as nothing is using it. By
default this will switch to using the generic machvec, which provides the
same functionality. This saves us a bit of space in the machvec section.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:03 +09:00
Magnus Damm
4545bfa00a sh: add ov772x reset delay on Migo-R
Add reset delay for the ov772x device on Migo-R.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:03 +09:00
Paul Mundt
ea0aac1e13 sh: Consolidate rsk7203/7201 in to a new mach-rsk.
RSK+ platforms have quite a few characteristics in common, so roll them
together in to a shiny new RSK mach-type.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:02 +09:00
Magnus Damm
3e51762759 sh: move the hp6xx pm code
Move the not-so-generic pm code from arch/sh/kernel/pm.c to the
platform directory together with the rest of the hp6xx pm code.

This is done to let non-hp6xx platforms enable CONFIG_PM.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:52 +09:00
Magnus Damm
21c601bb2e sh: remove ioport cruft and smc91x from se7343
Remove out-of-date se7343 ioport code including some old support
for unknown-ne2000-pcmcia-card, cf-over-pcmcia and a mysterical
smc91x that once must have been on a special daughterboard.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:51 +09:00
Magnus Damm
5e5aacb0de sh: add isp1161 usb host device to se7343
Add isp1161 platform data to get usb host working on se7343.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:51 +09:00
Magnus Damm
6aacba72db sh: add st16c2550 devices to se7343
Add 8250 platform data to setup the ST16C2550C chip on se7343.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:51 +09:00
Magnus Damm
5727003b5d sh: fix number of interrupts on se7343
Fix to make sure that the on-board interrupt sources are included
in the interrupt count on se7343.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:51 +09:00
Peter Griffin
6feb348783 sh: RSK+ 7201 board support.
This patch adds support for the RTE RSK+ 7201 board.

Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:51 +09:00
Magnus Damm
b51339fff2 sh: sh_mobile lcdc clock framework support
Add clock framework support to the lcdc driver and
adjust the board specific code accordingly.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:52 +09:00
Magnus Damm
a42b6dd69c sh: sh_mobile ceu clock framework support
Add clock framework support to the sh_mobile ceu and
adjust the board specific code accordingly.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:51 +09:00
Magnus Damm
090d951b69 sh: sh_mobile keysc clock framework support
Add clock framework support to the sh_mobile keysc driver and
adjust the board specific code accordingly.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:51 +09:00
Paul Mundt
61dc6eaeef sh: mach-highlander: Handle SCIF pinmuxing on R7785RP.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-23 12:35:43 +09:00
Magnus Damm
22ee3ba611 sh: use 10MHz VIO_CLK for ov772x on Migo-R
Use a slower VIO_CKO clock frequency for the ov772x on Migo-R.
This improves the camera picture quality on Panel Board V2.1.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-22 18:34:09 +09:00
Magnus Damm
3b495513a2 sh: update ov772x byte order on Migo-R
Update the ov772x byte sequence to enable byte swap. This to reflect
the recent CEU driver change to follow incoming byte order.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21 21:41:23 +09:00
Paul Mundt
f7141d5884 sh: ap325rxa: Kill off unused port definitions.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21 18:13:15 +09:00
Paul Mundt
dd0e20e588 sh: ap325rxa: Move off of hardcoded pinmux for flctl initialization.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21 18:08:10 +09:00
Yoshihiro Shimoda
908978acbe sh: add support FLCTL for ap325rxa board
This patch adds platform_device for sh_flctl driver, NAND Flash
simple partition, and GPIO setting.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21 18:03:33 +09:00
Paul Mundt
bbc97411d1 sh: rsk7203: leds-gpio support for RSK+ LEDs.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21 14:27:51 +09:00
Guennadi Liakhovetski
58419abd50 sh: fix soc-camera compile breakage on Migo-R.
Fix Migo-R compile breakage caused by incomplete merge.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21 12:51:51 +09:00
Paul Mundt
a51413a65f sh: Fix up the SH7203 build.
The sh7203.h include paths were missed in the previous update, so switch
the include path to cpu/ as with the rest.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-21 12:51:51 +09:00
Paul Mundt
7639a4541f sh: Migrate common board headers to mach-common/.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 13:02:48 +09:00