Commit Graph

16 Commits

Author SHA1 Message Date
Zbigniew Luszpinski
96bcf458cb x86: hpet clock enable quirk on nVidia nForce 430
this patch allows hpet=force on nVidia nForce 430 southbridge.
This patch was tested by me on my old Asus A8N-VM CSM (where bios does not
support hpet and does not advertise it via acpi entry). My nForce430 version:
lspci -nn | grep LPC
00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260]
(rev a2)

Kernel 2.6.24.3 after patching and using hpet=force reports this:
dmesg | grep -i hpet
Kernel command line: root=/dev/sda8 ro vga=773 video=vesafb:mtrr:4,ywrap
vt.default_utf8=0 hpet=force
Force enabled HPET at base address 0xfed00000
hpet clockevent registered
Time: hpet clocksource has been installed.

grep -i hpet /proc/timer_list
Clock Event Device: hpet
 set_next_event: hpet_legacy_next_event
 set_mode:       hpet_legacy_set_mode

grep Clock /proc/timer_list (before patching)
Clock Event Device: pit
Clock Event Device: lapic

grep Clock /proc/timer_list (after patching)
Clock Event Device: hpet
Clock Event Device: lapic

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21 17:06:15 +01:00
Matthew Wilcox
9585ca02f8 Use proper abstractions in quirk_intel_irqbalance
Since we may not have a pci_dev for the device we need to access, we can't
use pci_read_config_word.  But raw_pci_read is an internal implementation
detail; it's better to use the architected pci_bus_read_config_word
interface.  Using PCI_DEVFN instead of a mysterious constant helps
reassure everyone that we really do intend to access device 8.

[ Thanks to Grant Grundler for pointing out to me that this is exactly
  what the write immediately above this is doing -- enabling device 8 to
  respond to config space cycles.
					- Matthew

  Grant also says:

	"Can you also add a comment which points at the Intel
	 documentation?

	 The 'Intel E7320 Memory Controller Hub (MCH) Datasheet' at

	  http://download.intel.com/design/chipsets/datashts/30300702.pdf

	 Page 69 documents register F4h (DEVPRES1).

	 And I just doubled checked that the 0xf4 register value is
	 restored later in the quirk (obvious when you look at the code
	 but not from the patch"

  so here it is.
					 - Linus ]

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-11 08:15:03 -08:00
Matthew Wilcox
b6ce068a12 Change pci_raw_ops to pci_raw_read/write
We want to allow different implementations of pci_raw_ops for standard
and extended config space on x86.  Rather than clutter generic code with
knowledge of this, we make pci_raw_ops private to x86 and use it to
implement the new raw interface -- raw_pci_read() and raw_pci_write().

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-10 12:52:46 -08:00
Harvey Harrison
4a5a77d106 x86: trivial sparse/checkpatch in quirks.c
arch/x86/kernel/quirks.c:384:3: warning: returning void-valued expression
arch/x86/kernel/quirks.c:387:3: warning: returning void-valued expression
arch/x86/kernel/quirks.c:390:3: warning: returning void-valued expression
arch/x86/kernel/quirks.c:393:3: warning: returning void-valued expression

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06 22:39:44 +01:00
bjorn.helgaas@hp.com
9ed885541b PCI: use dev_printk in x86 quirk messages
Convert quirk printks to dev_printk().

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:27 -08:00
Alistair John Strachan
dff244af01 x86: force enable HPET on (some?) ICH9 boards
Some consumer ICH9 boards (such as the Abit IP35 Pro) do not provide a BIOS
option for enabling the HPET. The same ICH workaround used for 6,7,8 can be
applied to 9. Here I enable the only PCI id that was visible on my system.

I have confirmed the HPETs work both from userspace and as a clocksource for
the running kernel (2.6.24 here) after applying this patch.

 Force enabled HPET at base address 0xfed00000
 hpet clockevent registered
 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
 hpet0: 4 64-bit timers, 14318180 Hz

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:39 +01:00
Carlos Corbacho
1b82ba6e47 x86: Add HPET force support for MCP55 (nForce 5) chipsets
Add support to force_hpet for all known MCP55 (nForce 5) chipset
LPC bridges.

These are the untested nForce 5 chips (taken from Mikko's original 
patch, and checked against pci.ids).

Signed-off-by: Carlos Corbacho <cathectic@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

 arch/x86/kernel/quirks.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
2007-10-23 22:37:25 +02:00
Carlos Corbacho
d79a5f80dc x86: Force enable HPET for CK804 (nForce 4) chipsets
This patch adds a quirk from LinuxBIOS to force enable HPET on
the nVidia CK804 (nForce 4) chipset.

This quirk can very likely support more than just nForce 4
(LinuxBIOS use the same code for nForce 5), and possibly nForce 3,
but I don't have those chipsets, so cannot add and test them.

Tested on an Abit KN9 (CK804).

Signed-off-by: Carlos Corbacho <cathectic@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

 Documentation/kernel-parameters.txt |    3 +-
 arch/x86/kernel/quirks.c            |   37 +++++++++++++++++++++++++++++++++++-
 2 files changed, 38 insertions(+), 2 deletions(-)
2007-10-23 22:37:25 +02:00
Udo A. Steinberg
158ad3260b x86: enable HPET on ICH3 and ICH4
ICH3 and ICH4 have undocumented HPET capabilities. This patch enables
HPET for platforms based around these ICHs.

Tested on various ICH3 and ICH4 platforms.

Because HPET is not officially documented for ICH3/4 and may not have
been validated by chipset folks, we're on thin ice here. I'd recommend
testing this patch in -hrt or -mm for a while and wait for
success/failure reports before feeding it upstream.

tglx: depends on the force_hpet command line option !

Signed-off-by: Udo A. Steinberg <us15@os.inf.tu-dresden.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-19 20:35:02 +02:00
Udo A. Steinberg
b196884e2f x86: force enable HPET on VT8235/8237 chipsets
This patch adds quirks to force enable HPET on Via VT8235 and
VT8237 chipsets. The datasheet for 8237 documents HPET
functionality (although wrongly) whereas HPET is undocumented
for 8235.

Tested on A7V880 (8237) and K7VT4A+ (8235) boards.

tglx: depends on the force_hept commandline option

Signed-off-by: Udo A. Steinberg <us15@os.inf.tu-dresden.de>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-19 20:35:02 +02:00
Thomas Gleixner
764922376c x86: quirk.c trivial coding style and white space cleanup
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-19 20:35:02 +02:00
Venki Pallipadi
ed6fb174ee x86: HPET add another ICH7 PCI id
Add another PCI ID for ICH7 force hpet.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12 23:04:24 +02:00
Venki Pallipadi
32a2da64c2 x86: HPET force enable ICH5 suspend/resume fix
A bugfix in ich5 hpet force detect which caused resumes to fail.  Thanks to
Udo A Steinberg for reporting the problem.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-12 23:04:24 +02:00
Venki Pallipadi
bfe0c1cc64 x86: HPET force enable for ICH5
force_enable hpet for ICH5.

[ Build fixes from Andrew Morton ]

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-12 23:04:24 +02:00
Venki Pallipadi
d54bd57d65 x86: HPET force enable o ICH7 and later
Force detect and/or enable HPET on ICH chipsets.  This patch just handles the
detection part and following patches use this information.  Adds a function to
repeat the force enabling during resume time.

Using HPET this way, instead of PIT increases the time CPUs can reside in
C-state when system is totally idle.  On my test system with Core 2 Duo,
average C-state residency goes up from ~20mS to ~80mS.

[ Build fixed from Andrew Morton ]

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-12 23:04:23 +02:00
Thomas Gleixner
9a163ed8e0 i386: move kernel
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:17:01 +02:00