Commit Graph

492 Commits

Author SHA1 Message Date
David S. Miller
5f92c32936 [SPARC64]: Fix several bugs in MSI handling.
1) sun4{u,v}_build_msi() have improper return value handling.

   We should always return negative error codes, instead of
   using the magic value "0" which could in fact be a valid
   MSI number.

2) sun4{u,v}_build_msi() should return -ENOMEM instead of
   calling prom_prom() halt with kzalloc() of the interrupt
   data fails.

3) We 'remembered' the MSI number using a singleton in the
   struct device archdata area, this doesn't work for MSI-X
   which can cause multiple MSIs assosciated with one device.

   Delete that archdata member, and instead store the MSI
   number in the IRQ chip data area.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-30 23:06:51 -07:00
David S. Miller
6e69d6068c [SPARC64]: Fix type and constant sizes wrt. sun4u IMAP/ICLR handling.
Sometimes we were using 32-bit values and the top bits were
getting inadvertantly chopped off.  This will matter for the
forthcoming Fire controller MSI support.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-30 23:06:50 -07:00
David S. Miller
195f7fd0a7 [SPARC64]: Need to clobber global reg vars in switch_to().
Otherwise the compiler can't see the things like the
per-cpu area base register are changing.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-20 23:40:00 -07:00
David S. Miller
405849610f [MATH-EMU]: Fix underflow exception reporting.
The underflow exception cases were wrong.

This is one weird area of ieee1754 handling in that the underflow
behavior changes based upon whether underflow is enabled in the trap
enable mask of the FPU control register.  As a specific case the Sparc
V9 manual gives us the following description:

--------------------
If UFM = 0:     Underflow occurs if a nonzero result is tiny and a
                loss of accuracy occurs.  Tininess may be detected
                before or after rounding.  Loss of accuracy may be
                either a denormalization loss or an inexact result.

If UFM = 1:     Underflow occurs if a nonzero result is tiny.
                Tininess may be detected before or after rounding.
--------------------

What this amounts to in the packing case is if we go subnormal,
we set underflow if any of the following are true:

1) rounding sets inexact
2) we ended up rounding back up to normal (this is the case where
   we set the exponent to 1 and set the fraction to zero), this
   should set inexact too
3) underflow is set in FPU control register trap-enable mask

The initially discovered example was "DBL_MIN / 16.0" which
incorrectly generated an underflow.  It should not, unless underflow
is set in the trap-enable mask of the FPU csr.

Another example, "0x0.0000000000001p-1022 / 16.0", should signal both
inexact and underflow.  The cpu implementations and ieee1754
literature is very clear about this.  This is case #2 above.

However, if underflow is set in the trap enable mask, only underflow
should be set and reported as a trap.  That is handled properly by the
prioritization logic in

arch/sparc{,64}/math-emu/math.c:record_exception().

Based upon a report and test case from Jakub Jelinek.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-16 22:59:49 -07:00
David S. Miller
8b224b813a [SPARC64]: Create a HWCAP_SPARC_N2 and report it to userspace on Niagara-2.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-16 13:56:39 -07:00
David S. Miller
6c70b6fc7b [SPARC64]: Do not assume sun4v chips have load-twin/store-init support.
Check the cpu type in the OBP device tree before committing to
using the optimized Niagara memcpy and memset implementation.

If we don't recognize the cpu type, use a completely generic
version.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-08 17:33:45 -07:00
David S. Miller
46bcea7751 [SPARC]: Centralize find_in_proplist() instead of duplicating N times.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-07 18:46:36 -07:00
David S. Miller
6ba60d2195 [SPARC]: Fix O_CLOEXEC values.
The one choosen by asm-generic/fcntl.h is not appropriate
for this platform.

Noticed by Ulrich Drepper.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-03 14:24:17 -07:00
David S. Miller
63213196fd [SPARC64]: Add missing dma_sync_single_range_for_*().
Reported by Andrew Morton.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-03 14:08:20 -07:00
Andrew Morton
e5071b5493 [SPARC64]: Add missing dma_get_cache_alignment().
drivers/infiniband/hw/mthca/mthca_main.c: In function `mthca_init_icm':
drivers/infiniband/hw/mthca/mthca_main.c:468: error: implicit declaration of function `dma_get_cache_alignment'

Pinch the one from asm-generic/dma-mapping.h

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 01:28:33 -07:00
David S. Miller
8163904e66 [SPARC]: Mark SBUS framebuffer ioctls as IGNORE in compat_ioctl.c
They are handled in a ->compat_ioctl() handler, so it's just noise
when compat_ioctl.c warns which occurs when they are used on non-SBUS
framebuffer devices.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-30 00:27:36 -07:00
David S. Miller
9b539c03b2 [SPARC64]: asm-sparc64/floppy.h needs linux/pci.h
It uses pci_dev, calls pci_map_*(), etc.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-30 00:27:35 -07:00
David S. Miller
ad7ad57c61 [SPARC64]: Fix conflicts in SBUS/PCI/EBUS/ISA DMA handling.
Fully unify all of the DMA ops so that subordinate bus types to
the DMA operation providers (such as ebus, isa, of_device) can
work transparently.

Basically, we just make sure that for every system device we
create, the dev->archdata 'iommu' and 'stc' fields are filled
in.

Then we have two platform variants of the DMA ops, one for SUN4U which
actually programs the real hardware, and one for SUN4V which makes
hypervisor calls.

This also fixes the crashes in parport_pc on sparc64, reported by
Meelis Roos.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-30 00:27:34 -07:00
David S. Miller
0fe85d504b [SPARC64]: Convert parport to of_platform_driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20 17:15:35 -07:00
David S. Miller
3adf55ad5c [SPARC]: Implement fb_is_primary_device().
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20 17:15:09 -07:00
David S. Miller
c73fcc846c [SPARC]: Fix serial console device detection.
The current scheme works on static interpretation of text names, which
is wrong.

The output-device setting, for example, must be resolved via an alias
or similar to a full path name to the console device.

Paths also contain an optional set of 'options', which starts with a
colon at the end of the path.  The option area is used to specify
which of two serial ports ('a' or 'b') the path refers to when a
device node drives multiple ports.  'a' is assumed if the option
specification is missing.

This was caught by the UltraSPARC-T1 simulator.  The 'output-device'
property was set to 'ttya' and we didn't pick upon the fact that this
is an OBP alias set to '/virtual-devices/console'.  Instead we saw it
as the first serial console device, instead of the hypervisor console.

The infrastructure is now there to take advantage of this to resolve
the console correctly even in multi-head situations in fbcon too.

Thanks to Greg Onufer for the bug report.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20 16:59:26 -07:00
Linus Torvalds
2cb7e71422 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/ofcons
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/ofcons:
  Create drivers/of/platform.c
  Create linux/of_platorm.h
  [SPARC/64] Rename some functions like PowerPC
  Begin consolidation of of_device.h
  Begin to consolidate of_device.c
  Consolidate of_find_node_by routines
  Consolidate of_get_next_child
  Consolidate of_get_parent
  Consolidate of_find_property
  Consolidate of_device_is_compatible
  Start split out of common open firmware code
  Split out common parts of prom.h
2007-07-20 09:18:08 -07:00
David S. Miller
91ba3c2128 [SPARC64]: Fix handling of multiple vdc-port nodes.
The "id" property in vdc-port nodes are not unique, they
are all zero.  Therefore assign ID's using the parent's
"cfg-handle" property which will be unique.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-19 21:27:18 -07:00
David S. Miller
bc5a2e64a1 [SPARC]: Add sys_fallocate() entries.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-19 21:26:47 -07:00
David S. Miller
a376178011 [SPARC64]: Use orderly_poweroff().
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-19 21:26:42 -07:00
Stephen Rothwell
b41912ca34 Create linux/of_platorm.h
Move common stuff from asm-powerpc/of_platform.h to here and
move the common bits from asm-sparc*/of_device.h here as well.

Create asm-sparc*/of_platform.h and move appropriate parts of
of_device.h to them.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 14:25:22 +10:00
Stephen Rothwell
37b7754aab [SPARC/64] Rename some functions like PowerPC
This is to make the of merge easier.  Also rename of_bus_type.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 14:24:53 +10:00
Stephen Rothwell
f898f8dbce Begin consolidation of of_device.h
This just moves the common stuff from the arch of_device.h files to
linux/of_device.h.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:41:56 +10:00
Stephen Rothwell
1ef4d4242d Consolidate of_find_node_by routines
This consolidates the routines of_find_node_by_path, of_find_node_by_name,
of_find_node_by_type and of_find_compatible_device.  Again, the comparison
of strings are done differently by Sparc and PowerPC and also these add
read_locks around the iterations.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:39:06 +10:00
Stephen Rothwell
e679c5f445 Consolidate of_get_parent
This requires creating dummy of_node_{get,put} routines for sparc and
sparc64.  It also adds a read_lock around the parent accesses.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:32:58 +10:00
Stephen Rothwell
581b605a83 Consolidate of_find_property
The only change here is that a readlock is taken while the property list
is being traversed on Sparc where it was not taken previously.

Also, Sparc uses strcasecmp to compare property names while PowerPC
uses strcmp.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:32:24 +10:00
Stephen Rothwell
0081cbc373 Consolidate of_device_is_compatible
The only difference here is that Sparc uses strncmp to match compatibility
names while PowerPC uses strncasecmp.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:29:51 +10:00
Stephen Rothwell
97e873e5c8 Start split out of common open firmware code
This creates drivers/of/base.c (depending on CONFIG_OF) and puts
the first trivially common bits from the prom.c files into it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:28:41 +10:00
Stephen Rothwell
76c1ce7870 Split out common parts of prom.h
This creates linux/of.h and includes asm/prom.h from it.

We also include linux/of.h from asm/prom.h while we transition.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:10:22 +10:00
Ralf Baechle
c41917df8a [PATCH] sched: sched_cacheflush is now unused
Since Ingo's recent scheduler rewrite which was merged as commit
0437e109e1 sched_cacheflush is unused.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-19 21:28:35 +02:00
Peter Zijlstra
b111757c50 arch: personality independent stack top
New arch macro STACK_TOP_MAX it gives the larges valid stack address for the
architecture in question.

It differs from STACK_TOP in that it will not distinguish between
personalities but will always return the largest possible address.

This is used to create the initial stack on execve, which we will move down to
the proper location once the binfmt code has figured out where that is.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ollie Wild <aaw@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:45 -07:00
Fenghua Yu
5fb7dc37dc define new percpu interface for shared data
per cpu data section contains two types of data.  One set which is
exclusively accessed by the local cpu and the other set which is per cpu,
but also shared by remote cpus.  In the current kernel, these two sets are
not clearely separated out.  This can potentially cause the same data
cacheline shared between the two sets of data, which will result in
unnecessary bouncing of the cacheline between cpus.

One way to fix the problem is to cacheline align the remotely accessed per
cpu data, both at the beginning and at the end.  Because of the padding at
both ends, this will likely cause some memory wastage and also the
interface to achieve this is not clean.

This patch:

Moves the remotely accessed per cpu data (which is currently marked
as ____cacheline_aligned_in_smp) into a different section, where all the data
elements are cacheline aligned. And as such, this differentiates the local
only data and remotely accessed data cleanly.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Michael Ellerman
9e367d8592 jprobes: remove JPROBE_ENTRY()
AFAICT now that jprobe.entry is a void *, JPROBE_ENTRY doesn't do anything
useful - so remove it ..

I've left a do-nothing version so that out-of-tree jprobes code will still
compile without modifications.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Stephen Rothwell
0785b9dcdc [SPARC]: Mark sparc and sparc64 as not having virt_to_bus
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18 01:20:22 -07:00
David S. Miller
6160f63518 [SPARC64]: Massively simplify VIO device layer and support hot add/remove.
Create and destroy VIO devices in response to MD update events.  These
run synchronously inside of the MD update mutex so the VIO layer
doesn't need to do internal locking of any sort.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18 01:20:04 -07:00
David S. Miller
920c3ed741 [SPARC64]: Add basic infrastructure for MD add/remove notification.
And add dummy handlers for the VIO device layer.  These will be filled
in with real code after the vdc, vnet, and ds drivers are reworked to
have simpler dependencies on the VIO device tree.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18 01:19:51 -07:00
Antonino A. Daplas
317b3c2167 fbdev: detect primary display device
Add function helper, fb_is_primary_device().  Given struct fb_info, it will
return a nonzero value if the device is the primary display.

Currently, only the i386 is supported where the function checks for the
IORESOURCE_ROM_SHADOW flag.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:11 -07:00
Antonino A. Daplas
10eb2659cc fbdev: move arch-specific bits to their respective subdirectories
Move arch-specific bits of fb_mmap() to their respective subdirectories

[bob.picco@hp.com: efi_range_is_wc is referenced but not declared]
[bunk@stusta.de: fix include/asm-m68k/fb.h]
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:11 -07:00
Linus Torvalds
02b2318e07 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (26 commits)
  [SPARC64]: Fix UP build.
  [SPARC64]: dr-cpu unconfigure support.
  [SERIAL]: Fix console write locking in sparc drivers.
  [SPARC64]: Give more accurate errors in dr_cpu_configure().
  [SPARC64]: Clear cpu_{core,sibling}_map[] in smp_fill_in_sib_core_maps()
  [SPARC64]: Fix leak when DR added cpu does not bootup.
  [SPARC64]: Add ->set_affinity IRQ handlers.
  [SPARC64]: Process dr-cpu events in a kthread instead of workqueue.
  [SPARC64]: More sensible udelay implementation.
  [SPARC64]: SMP build fixes.
  [SPARC64]: mdesc.c needs linux/mm.h
  [SPARC64]: Fix build regressions added by dr-cpu changes.
  [SPARC64]: Unconditionally register vio_bus_type.
  [SPARC64]: Initial LDOM cpu hotplug support.
  [SPARC64]: Fix setting of variables in LDOM guest.
  [SPARC64]: Fix MD property lifetime bugs.
  [SPARC64]: Abstract out mdesc accesses for better MD update handling.
  [SPARC64]: Use more mearningful names for IRQ registry.
  [SPARC64]: Initial domain-services driver.
  [SPARC64]: Export powerd facilities for external entities.
  ...
2007-07-16 10:45:23 -07:00
Arnd Bergmann
4b7775870b Introduce compat_u64 and compat_s64 types
One common problem with 32 bit system call and ioctl emulation is the
different alignment rules between i386 and 64 bit machines.  A number of
drivers work around this by marking the compat structures as
'attribute((packed))', which is not the right solution because it breaks
all the non-x86 architectures that want to use the same compat code.

Hopefully, this patch improves the situation, it introduces two new types,
compat_u64 and compat_s64.  These are defined on all architectures to have
the same size and alignment as the 32 bit version of u64 and s64.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Vasily Tarasov <vtaras@openvz.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:48 -07:00
Jan Beulich
45e98cdb6d page table handling cleanup
Kill pte_rdprotect(), pte_exprotect(), pte_mkread(), pte_mkexec(), pte_read(),
pte_exec(), and pte_user() except where arch-specific code is making use of
them.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:36 -07:00
David S. Miller
e0204409df [SPARC64]: dr-cpu unconfigure support.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:05:32 -07:00
David S. Miller
8b99cfb8cc [SPARC64]: More sensible udelay implementation.
Take a page from the powerpc folks and just calculate the
delay factor directly.

Since frequency scaling chips use a system-tick register,
the value is going to be the same system-wide.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:05:02 -07:00
David S. Miller
b14f5c100c [SPARC64]: Fix build regressions added by dr-cpu changes.
Do not select HOTPLUG_CPU from SUN_LDOMS, that causes
HOTPLUG_CPU to be selected even on non-SMP which is
illegal.

Only build hvtramp.o when SMP, just like trampoline.o

Protect dr-cpu code in ds.c with HOTPLUG_CPU.

Likewise move ldom_startcpu_cpuid() to smp.c and protect
it and the call site with SUN_LDOMS && HOTPLUG_CPU.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:49 -07:00
David S. Miller
4f0234f4f9 [SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.

When new cpus are configured, the machine description is
updated.  When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus.  That code
also proceeds to update the SMT/multi-core scheduling bitmaps.

cpu_up() does all the work and we return the status back
over the DS channel.

CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:

1) A new trampoline mechanism.  CPUs are booted straight
   out of the hypervisor with MMU disabled and running in
   physical addresses with no mappings installed in the TLB.

   The new hvtramp.S code sets up the critical cpu state,
   installs the locked TLB mappings for the kernel, and
   turns the MMU on.  It then proceeds to follow the logic
   of the existing trampoline.S SMP cpu bringup code.

2) All calls into OBP have to be disallowed when domaining
   is enabled.  Since cpus boot straight into the kernel from
   the hypervisor, OBP has no state about that cpu and therefore
   cannot handle being invoked on that cpu.

   Luckily it's only a handful of interfaces which can be called
   after the OBP device tree is obtained.  For example, rebooting,
   halting, powering-off, and setting options node variables.

CPU removal support will require some infrastructure changes
here.  Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue.  workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed.  Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.

Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed.  So new code will be needed
to walk the active INO list and retarget those cpus as-needed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:40 -07:00
David S. Miller
b3e13fbeb9 [SPARC64]: Fix setting of variables in LDOM guest.
There is a special domain services capability for setting
variables in the OBP options node.  Guests don't have permanent
store for the OBP variables like a normal system, so they are
instead maintained in the LDOM control node or in the SC.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:36 -07:00
David S. Miller
83292e0a9c [SPARC64]: Fix MD property lifetime bugs.
Property values cannot be referenced outside of
mdesc_grab()/mdesc_release() pairs.  The only major
offender was the VIO bus layer, easily fixed.

Add some commentary to mdesc.h describing these rules.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:33 -07:00
David S. Miller
43fdf27470 [SPARC64]: Abstract out mdesc accesses for better MD update handling.
Since we have to be able to handle MD updates, having an in-tree
set of data structures representing the MD objects actually makes
things more painful.

The MD itself is easy to parse, and we can implement the existing
interfaces using direct parsing of the MD binary image.

The MD is now reference counted, so accesses have to now take the
form:

	handle = mdesc_grab();

	... operations on MD ...

	mdesc_release(handle);

The only remaining issue are cases where code holds on to references
to MD property values.  mdesc_get_property() returns a direct pointer
to the property value, most cases just pull in the information they
need and discard the pointer, but there are few that use the pointer
directly over a long lifetime.  Those will be fixed up in a subsequent
changeset.

A preliminary handler for MD update events from domain services is
there, it is rudimentry but it works and handles all of the reference
counting.  It does not check the generation number of the MDs,
and it does not generate a "add/delete" list for notification to
interesting parties about MD changes but that will be forthcoming.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:28 -07:00
David S. Miller
133f09a169 [SPARC64]: Use more mearningful names for IRQ registry.
All of the interrupts say "LDX RX" and "LDX TX" currently
which is next to useless.  Put a device specific prefix
before "RX" and "TX" instead which makes it much more
useful.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:24 -07:00
David S. Miller
13077d8028 [SPARC64]: Export powerd facilities for external entities.
Besides the existing usage for power-button interrupts, we'll
want to make use of this code for domain-services where the
LDOM manager can send reboot requests to the guest node.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:16 -07:00