Commit Graph

1667 Commits

Author SHA1 Message Date
Stefan Roscher
cf04690885 IB/ehca: Fix function return types
Also remove duplicate assignment of local_ca_ack_delay and change
min_t check for local_ca_ack_delay to u8 instead of int.

Signed-off-by: Stefan Roscher <stefan.roscher at de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-05 15:51:49 -07:00
Steve Wise
77a8d5741f RDMA/cxgb3: Bump up the MPA connection setup timeout.
Testing on large clusters shows its way too short at 10 secs.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-02 10:57:09 -07:00
Steve Wise
c4d49776e8 RDMA/cxgb3: Silently ignore close reply after abort.
Remove bad BUG_ON() that can trigger in correct operation from
close_con_rpl().  It is possible to get a close_rpl message on a dead
connection.  The sequence is:

	- host refs ep for close exchange
	- host posts close_req
	- hw posts PEER_ABORT from incoming RST
	- host marks ep DEAD
	- host posts ABORT_RPL and releases ep resources
	- hw posts CLOSE_RPL
	- host derefs ep and ep freed.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-02 10:57:09 -07:00
Steve Wise
c8286944b8 RDMA/cxgb3: QP flush fixes
- Flush the QP only after the HW disables the connection.  Currently
  we flush the QP when transitioning to CLOSING.  This exposes a race
  condition where the HW can complete a RECV WR, for instance, -and-
  the SW can flush that same WR.

- Only call CQ event handlers on flush IFF we actually flushed something.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-02 10:56:57 -07:00
Eli Cohen
57ce41d1d1 IB/ipoib: Fix transmit queue stalling forever
Commit f56bcd80 ("IPoIB: Use separate CQ for UD send completions")
introduced a bug where the transmit queue could get stopped and never
woken up.  The problem is that send completions are only polled at the
end of the xmit function, so if the send queue fills up and the xmit
path stops the queue, then there is no way for send completions to
ever get polled, and so the transmit queue stays stopped forever.

Fix this by arming the send CQ just before posting the last send
request that fills the send queue.  Then, when the completion event
handler is called, drain the send CQ.  Since it is possible that not
enough send completions are in the CQ, verify that the the net queue
has been woken up after draining the send CQ, and if not arm a timer
and drain again at the timer function.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-30 20:02:45 -07:00
Roland Dreier
3ae15e1623 IB/mlx4: Fix off-by-one errors in calls to mlx4_ib_free_cq_buf()
When I merged bbf8eed1 ("IB/mlx4: Add support for resizing CQs") I
changed things around so that mlx4_ib_alloc_cq_buf() and
mlx4_ib_free_cq_buf() were used everywhere they could be.  However, I
screwed up the number of entries passed into mlx4_ib_alloc_cq_buf()
in a couple places -- the function bumps the number of entries
internally, so the caller shouldn't add 1 as well.

Passing a too-big value for the number of entries to mlx4_ib_free_cq_buf()
can cause the cleanup to go off the end of an array and corrupt
allocator state in interesting ways.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-30 19:52:55 -07:00
Glenn Streiff
7495ab6837 RDMA/nes: Formatting cleanup
Various cleanups:
	- Change // to /* .. */
	- Place whitespace around binary operators.
	- Trim down a few long lines.
	- Some minor alignment formatting for better readability.
	- Remove some silly tabs.

Signed-off-by: Glenn Streiff <gstreiff@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:54 -07:00
Eric Schneider
0e1de5d62e RDMA/nes: Add support for SFP+ PHY
This patch enables the iw_nes module for NetEffect RNICs to support
additional PHYs including SFP+ (referred to as ARGUS in the code).

Signed-off-by: Eric Schneider <eric.schneider@neteffect.com>
Signed-off-by: Glenn Streiff <gstreiff@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:54 -07:00
Faisal Latif
37dab4112d RDMA/nes: Use LRO
Signed-off-by: Faisal Latif <flatif@neteffect.com.
Signed-off-by: Glenn Streiff <gstreiff@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:54 -07:00
Eli Cohen
b4132efa1a IPoIB: Copy child MTU from parent
When creating a child interface, copy the MTU information from the
parent.  Otherwise when the child's multicast join completes, the MTU
will not be updated since the code does

	dev->mtu = min(priv->mcast_mtu, priv->admin_mtu);

and priv->admin_mtu will be set to 0.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:53 -07:00
Roland Dreier
baaad380c0 IB/mthca: Avoid changing userspace ABI to handle DMA write barrier attribute
Commit cb9fbc5c ("IB: expand ib_umem_get() prototype") changed the
mthca userspace ABI to provide a way for userspace to indicate which
memory regions need the DMA write barrier attribute.  However, it is
possible to handle this without breaking existing userspace, by having
the mthca kernel driver recognize whether it is talking to old or new
userspace, depending on the size of the register MR structure passed in.

The only potential drawback of this is that is allows old userspace
(which has a bug with DMA ordering on large SGI Altix systems) to
continue to run on new kernels, but the advantage of allowing old
userspace to continue to work on unaffected systems seems to outweigh
this, and we can print a warning to push people to upgrade their
userspace.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:53 -07:00
Olaf Kirch
0bfe151cc4 IB/mthca: Avoid recycling old FMR R_Keys too soon
When a FMR is unmapped, mthca resets the map count to 0, and clears
the upper part of the R_Key which is used as the sequence counter.

This poses a problem for RDS, which uses ib_fmr_unmap as a fence
operation.  RDS assumes that after issuing an unmap, the old R_Keys
will be invalid for a "reasonable" period of time. For instance,
Oracle processes uses shared memory buffers allocated from a pool of
buffers.  When a process dies, we want to reclaim these buffers -- but
we must make sure there are no pending RDMA operations to/from those
buffers.  The only way to achieve that is by using unmap and sync the
TPT.

However, when the sequence count is reset on unmap, there is a high
likelihood that a new mapping will be given the same R_Key that was
issued a few milliseconds ago.

To prevent this, don't reset the sequence count when unmapping a FMR.

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:53 -07:00
Stefan Roscher
d227fa7288 IB/ehca: Allocate event queue size depending on max number of CQs and QPs
If a lot of QPs fall into Error state at once and the EQ of the
respective HCA is too small, it might overrun, causing the eHCA driver
to stop processing completion events and calling the application's
completion handlers, effectively causing traffic to stop.

Fix this by limiting available QPs and CQs to a customizable max
count, and determining EQ size based on these counts and a worst-case
assumption.

Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:53 -07:00
Eli Cohen
f56bcd8013 IPoIB: Use separate CQ for UD send completions
Use a dedicated CQ for UD send completions. Also, do not arm the UD
send CQ, which reduces the number of interrupts generated.  This patch
farther reduces overhead by not calling poll CQ for every posted send
WR -- it does polls only when there 16 or more outstanding work requests.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:53 -07:00
Eli Dorfman
87528227df IB/iser: Count FMR alignment violations per session
Count FMR alignment violations per session as part of the iscsi
statistics.

Signed-off-by: Eli Dorfman <elid@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:52 -07:00
Eli Dorfman
6f735e36ba IB/iser: Move high-volume debug output to higher debug level
Add another level for debug.

Signed-off-by: Eli Dorfman <elid@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:52 -07:00
Hoang-Nam Nguyen
7df109d917 IB/ehca: handle negative return value from ibmebus_request_irq() properly
ehca_create_eq() was assigning a signed return value to an unsiged
local variable and then checking if the variable was < 0, which meant
that errors were always ignored.  Fix this by using one variable for
signed integer return values and another for u64 hcall return values.

Bug originally found by Roel Kluin <12o3l@tiscali.nl>.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:52 -07:00
Steve Wise
f8b0dfd152 RDMA/cxgb3: Support peer-2-peer connection setup
Open MPI, Intel MPI and other applications don't respect the iWARP
requirement that the client (active) side of the connection send the
first RDMA message.  This class of application connection setup is
called peer-to-peer.  Typically once the connection is setup, _both_
sides want to send data.

This patch enables supporting peer-to-peer over the chelsio RNIC by
enforcing this iWARP requirement in the driver itself as part of RDMA
connection setup.

Connection setup is extended, when the peer2peer module option is 1,
such that the MPA initiator will send a 0B Read (the RTR) just after
connection setup.  The MPA responder will suspend SQ processing until
the RTR message is received and reply-to.

In the longer term, this will be handled in a standardized way by
enhancing the MPA negotiation so peers can indicate whether they
want/need the RTR and what type of RTR (0B read, 0B write, or 0B send)
should be sent.  This will be done by standardizing a few bits of the
private data in order to negotiate all this.  However this patch
enables peer-to-peer applications now and allows most of the required
firmware and driver changes to be done and tested now.

Design:

 - Add a module option, peer2peer, to enable this mode.

 - New firmware support for peer-to-peer mode:

	- a new bit in the rdma_init WR to tell it to do peer-2-peer
	  and what form of RTR message to send or expect.

	- process _all_ preposted recvs before moving the connection
	  into rdma mode.

	- passive side: defer completing the rdma_init WR until all
	  pre-posted recvs are processed.  Suspend SQ processing until
	  the RTR is received.

	- active side: expect and process the 0B read WR on offload TX
	  queue. Defer completing the rdma_init WR until all
	  pre-posted recvs are processed.  Suspend SQ processing until
	  the 0B read WR is processed from the offload TX queue.

 - If peer2peer is set, driver posts 0B read request on offload TX
   queue just after posting the rdma_init WR to the offload TX queue.

 - Add CQ poll logic to ignore unsolicitied read responses.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:52 -07:00
Steve Wise
ccaf10d0ad RDMA/cxgb3: Set the max_mr_size device attribute correctly
cxgb3 only supports 4GB memory regions.  The lustre RDMA code uses
this attribute and currently has to code around our bad setting.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:52 -07:00
Steve Wise
989a178069 RDMA/cxgb3: Correctly serialize peer abort path
Open MPI and other stress testing exposed a few bad bugs in handling
aborts in the middle of a normal close.  Fix these by:

 - serializing abort reply and peer abort processing with disconnect
   processing

 - warning (and ignoring) if ep timer is stopped when it wasn't running

 - cleaning up disconnect path to correctly deal with aborting and
   dead endpoints

 - in iwch_modify_qp(), taking a ref on the ep before releasing the qp
   lock if iwch_ep_disconnect() will be called.  The ref is dropped
   after calling disconnect.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:51 -07:00
Yevgeny Petrilin
e463c7b197 mlx4_core: Add a way to set the "collapsed" CQ flag
Extend the mlx4_cq_resize() API with a way to set the "collapsed" flag
for the CQ being created.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:50 -07:00
Arthur Kepner
cb9fbc5c37 IB: expand ib_umem_get() prototype
Add a new parameter, dmasync, to the ib_umem_get() prototype.  Use dmasync = 1
when mapping user-allocated CQs with ib_umem_get().

Signed-off-by: Arthur Kepner <akepner@sgi.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Jes Sorensen <jes@sgi.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:12 -07:00
Roland Dreier
31d1e340f0 RDMA/nes: Remove volatile qualifier from struct nes_hw_cq.cq_vbase
Remove the volatile qualifier from the cq_vbase member of struct
nes_hw_cq, and add an rmb() in the one place where it looks like
access order might make a difference.  As usual, removing a volatile
qualifier in a declaration is actually a bug fix, since a volatile
qualifier is not sufficient to make sure that aggressively
out-of-order CPUs don't reorder things and cause incorrect results.

For example, a CPU might speculatively execute reads of other cqe
fields before the NIC hardware has written those fields and before it
has set the NES_CQE_VALID bit (even though those reads come after the
test of the NES_CQE_VALID bit in program order), but then when the CPU
actually executes the conditional test of the NES_CQE_VALID, the bit
has been set, and the CPU will proceed with the results of the earlier
speculative execution and end up using bogus data.

This also gets rid of the warning:

    drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_destroy_cq':
    drivers/infiniband/hw/nes/nes_verbs.c:1978: warning: passing argument 3 of 'pci_free_consistent' discards qualifiers from pointer target type

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23 11:55:45 -07:00
Yevgeny Petrilin
6296883ca4 mlx4_core: Move kernel doorbell management into core
In addition to mlx4_ib, there will be ethernet and FC consumers of
mlx4_core, so move the code for managing kernel doorbells into the
core module to avoid having to duplicate this multiple times.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23 11:55:45 -07:00
Joachim Fenkes
14fb05b349 IB/ehca: Bump version number to 0026
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23 11:55:45 -07:00
Joachim Fenkes
0455e36d81 IB/ehca: Make some module parameters bool, update descriptions
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23 11:55:45 -07:00
Joachim Fenkes
a7607c9b11 IB/ehca: Remove mr_largepage parameter
Always enable large page support; didn't seem to cause problems for anyone.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23 11:55:45 -07:00
Joachim Fenkes
4da27d6d5b IB/ehca: Move high-volume debug output to higher debug levels
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23 11:55:45 -07:00
Joachim Fenkes
863fb09fbf IB/ehca: Prevent posting of SQ WQEs if QP not in RTS
...as required by IB Spec, C10-29.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23 11:55:45 -07:00
Shirley Ma
bc7b3a36ba IPoIB: Handle 4K IB MTU for UD (datagram) mode
This patch enables IPoIB to use 4K UD messages (when the underlying
device and fabrics support a 4K MTU) by using two scatter buffers when
PAGE_SIZE is less than or equal to thhe HCA IB MTU size.  The first
buffer is for IPoIB header + GRH header, and the second buffer is the
IPoIB payload, which is 4K-4.

Signed-off-by: Shirley Ma <xma@us.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23 11:55:45 -07:00
Chien Tung
bc5698f3ec RDMA/nes: Fix adapter reset after PXE boot
After PXE boot, the iw_nes driver does a full reset to ensure the card
is in a clean state.  However, it doesn't wait for firmware to
complete its work before issuing a port reset to enable the ports,
which leads to problems bringing up the ports.

The solution is to wait for firmware to complete its work before
proceeding with port reset.

This bug was flagged by Roland Dreier <rolandd@cisco.com>.

Cc: <stable@kernel.org>
Signed-off-by: Chien Tung <ctung@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23 11:55:45 -07:00
Roland Dreier
e447703123 RDMA/nes: Print IPv4 addresses in a readable format
Use NIPQUAD_FMT instead of printing raw 32-bit hex quantities in
debugging output.

Acked-by: Glenn Streiff <gstreiff@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23 11:55:43 -07:00
Roland Dreier
2bd01c5d2e RDMA/nes: Use print_mac() to format ethernet addresses for printing
Removing open-coded MAC formats shrinks the source and the generated
code too, eg on x86-64:

add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-103 (-103)
function                                     old     new   delta
make_cm_node                                 932     912     -20
nes_netdev_set_mac_address                   427     406     -21
nes_netdev_set_multicast_list               1148    1124     -24
nes_probe                                   2349    2311     -38

Acked-by: Glenn Streiff <gstreiff@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23 11:52:18 -07:00
Roland Dreier
bc751fe6ff IB/ipath: Correct capitalization "IntX" -> "INTx"
Match what the PCI specification uses.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21 18:19:15 -07:00
Roland Dreier
44957572cc IB/ipath: Remove tests of PCI_MSI in ipath_iba7220.c
The PCI MSI interface is stubbed out properly so that all the
functions just return failure if PCI_MSI=n, so there's no reason to
have "#ifdef CONFIG_PCI_MSI" blocks in ipath_iba7220.c.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21 18:19:15 -07:00
Roland Dreier
480f58e614 IB/ipath: Remove dependency on PCI_MSI || HT_IRQ
Before IBA7220 support was added, the ipath driver didn't support any
hardware unless PCI_MSI and/or HT_IRQ was enabled.  However, the
IBA7220 can generate INTx interrupts, so it makes sense to allow the
driver to be build even if PCI_MSI=n and HT_IRQ=n.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21 18:19:14 -07:00
Roland Dreier
37a6ab5227 IB/ipath: Build IBA7220 code unconditionally
The new IBA7220 code added a call to ipath_init_iba7220_funcs() that
is compiled unconditionally, but only built the IBA7220 code if
PCI_MSI is enabled.  Fix this by building the IBA7220 file
unconditonally.

This fixes build breakage when PCI_MSI=n, HT_IRQ=y and
INFINIBAND_IPATH=y reported by Ingo Molnar <mingo@elte.hu>:

 drivers/built-in.o: In function `ipath_init_one':
 ipath_driver.c:(.devinit.text+0x1e5bc): undefined reference to `ipath_init_iba7220_funcs'

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21 18:19:14 -07:00
Roland Dreier
88a8317bcd IB/ipath: Remove reference to dev->class_dev
Commit 124b4dcb ("IB/ipath: add calls to new 7220 code and enable in                                
build") inadvertently added core to set dev->class_dev.dev back into                                
ib_ipath.  This is completely redundant since commit 1912ffbb ("IB: Set                             
class_dev->dev in core for nice device symlink"), which removed                                     
class_dev setting from low-level drivers, and also will break the build
when class_dev is removed completely from struct ib_device.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21 18:19:14 -07:00
Paul Bolle
9862874d21 IB/ipath: Fix module parameter description for disable_sma
Describe disable_sma parameter with its name rather than the internal
ib_ipath_disable_sma variable name, so that the description shows up
properly in modinfo.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21 18:19:13 -07:00
Roland Dreier
6a5546e76c RDMA/nes: Remove unneeded function declarations
Remove redundant static declarations of functions that are defined
before they are used in the source.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21 18:19:12 -07:00
Linus Torvalds
e80ab411e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits)
  SCSI: convert struct class_device to struct device
  DRM: remove unused dev_class
  IB: rename "dev" to "srp_dev" in srp_host structure
  IB: convert struct class_device to struct device
  memstick: convert struct class_device to struct device
  driver core: replace remaining __FUNCTION__ occurrences
  sysfs: refill attribute buffer when reading from offset 0
  PM: Remove destroy_suspended_device()
  Firmware: add iSCSI iBFT Support
  PM: Remove legacy PM (fix)
  Kobject: Replace list_for_each() with list_for_each_entry().
  SYSFS: Explicitly include required header file slab.h.
  Driver core: make device_is_registered() work for class devices
  PM: Convert wakeup flag accessors to inline functions
  PM: Make wakeup flags available whenever CONFIG_PM is set
  PM: Fix misuse of wakeup flag accessors in serial core
  Driver core: Call device_pm_add() after bus_add_device() in device_add()
  PM: Handle device registrations during suspend/resume
  block: send disk "change" event for rescan_partitions()
  sysdev: detect multiple driver registrations
  ...

Fixed trivial conflict in include/linux/memory.h due to semaphore header
file change (made irrelevant by the change to mutex).
2008-04-21 15:49:58 -07:00
Tony Jones
ee959b00c3 SCSI: convert struct class_device to struct device
It's big, but there doesn't seem to be a way to split it up smaller...

Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:33 -07:00
Greg Kroah-Hartman
0532193746 IB: rename "dev" to "srp_dev" in srp_host structure
This sets us up to be able to convert the srp_host to use a struct
device instead of a class_device.

Based on a original patch from Tony Jones, but split up into this piece
by Greg.

Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Reviewed-by: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:30 -07:00
Tony Jones
f4e91eb4a8 IB: convert struct class_device to struct device
This converts the main ib_device to use struct device instead of struct
class_device as class_device is going away.

Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:30 -07:00
Matthew Wilcox
6188e10d38 Convert asm/semaphore.h users to linux/semaphore.h
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18 22:22:54 -04:00
Matthew Wilcox
d3135846f6 drivers: Remove unnecessary inclusions of asm/semaphore.h
None of these files use any of the functionality promised by
asm/semaphore.h.  It's possible that they rely on it dragging in some
unrelated header file, but I can't build all these files, so we'll have
fix any build failures as they come up.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18 22:16:32 -04:00
Erez Zilber
0a22ab92f5 IB/iser: Don't change itt endianness
The itt field in struct iscsi_data is not defined with any particular
endianness.  open-iscsi should use it as-is without byte-swapping it.
This fixes sparse warnings coming from doing ntohl(hdr->itt).

Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:09:35 -07:00
Jack Morgenstein
068c4ea1bb IB/mlx4: Update module version and release date
The mlx4_ib driver is stable enough for production use, so bump the
version number to 1.0 to indicate this.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:09:35 -07:00
Roland Dreier
9fdd5e5bf6 IPoIB: Handle case when P_Key is deleted and re-added at same index
If a P_Key is deleted and then re-added at the same index, then IPoIB
gets confused because __ipoib_ib_dev_flush() only checks whether the
index is the same without checking whether the P_Key was present, so
the interface is stopped when the P_Key is deleted, but the event when
the P_Key is re-added gets ignored and the interface never gets
restarted.

Also, switch to using ib_find_pkey() instead of ib_find_cached_pkey()
everywhere in IPoIB, since none of the places that look for P_Keys are
in a fast path or in non-sleeping context, and in general we want to
kill off the whole caching infrastructure eventually.  This also fixes
consistency problems caused because some IPoIB queries were cached and
some were uncached during the window where the cache was not updated.

Thanks to Venkata Subramonyam <vsubramo@cisco.com> for debugging this
problem and testing this fix.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:09:35 -07:00
Erez Zilber
d97c51707d IB/iser: Release connection resources on RDMA_CM_EVENT_DEVICE_REMOVAL event
When a RDMA_CM_EVENT_DEVICE_REMOVAL event is raised, iSER should
release the connection resources.

This is necessary when the IB HCA module is unloaded while open-iscsi
is still running.  Currently, iSER just BUG()s.

Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:09:35 -07:00