Commit Graph

209 Commits

Author SHA1 Message Date
David S. Miller
e8abbe0d02 Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge 2012-03-11 15:36:34 -07:00
Sven Eckelmann
40e0c4f51d batman-adv: Remove spaces after a cast
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-03-11 06:29:44 +08:00
Sven Eckelmann
96741ade15 batman-adv: Use {} braces consistent on the arms of a statement
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-03-11 06:29:44 +08:00
Sven Eckelmann
21a1236bc3 batman-adv: Don't begin block comments with only a /* line
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-03-11 06:29:44 +08:00
Sven Eckelmann
86ceb36056 batman-adv: Ignore 80-chars per line limits for strings
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-03-11 06:29:44 +08:00
David S. Miller
0695512a57 Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge 2012-02-28 15:07:52 -05:00
Sven Eckelmann
7c64fd98ce batman-adv: Fix indentation of multiline statements
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-28 19:14:31 +08:00
Danny Kukawka
28009a6cab batman-adv: use eth_hw_addr_random() instead of random_ether_addr()
Use eth_hw_addr_random() instead of calling random_ether_addr()
to set addr_assign_type correctly to NET_ADDR_RANDOM.

Remove dev_addr in interface_setup(), it's not needed anymore.

Reset the state to NET_ADDR_PERM as soon as the MAC get
changed via .ndo_set_mac_address.

v2: use bitops, adapt to eth_hw_addr_random()

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-17 15:58:06 -05:00
Sven Eckelmann
fdc8ff1011 batman-adv: Start new development cycle
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:21 +08:00
Antonio Quartulli
78d6942a45 batman-adv: TT_CLIENT_PENDING is never set in struct tt_global_entry
Actually the TT_CLIENT_PENDING flag is never set in the tt_global_entry
structure, therefore this code is useless and can be removed.

Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:21 +08:00
Antonio Quartulli
c566dbbef0 batman-adv: code refactoring - move debug print into tt_local_set_pending
Each tt_local_set_pending is always followed by a bat_dbg invocation. This can
be simplified by moving the bat_dbg() call.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:21 +08:00
Antonio Quartulli
c40ed2bfa6 batman-adv: set TT_CLIENT_NEW flag before invoking hash_add()
In case of a new tt_local_entry, the TT_CLIENT_NEW flag has to be set before
adding such entry to the hash table. Otherwise, it opens a race condition
in which the entry can be found but the flag has not been set.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:21 +08:00
Sven Eckelmann
567db7b0b7 batman-adv: Update copyright years
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:21 +08:00
Marek Lindner
ea3d2fd1b1 batman-adv: export used routing algorithm via sysfs
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:20 +08:00
Sven Eckelmann
92f90f56ca batman-adv: refactor tt_global_del() to avoid misalignment
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:20 +08:00
Marek Lindner
d419be1fd1 batman-adv: allowing changing the routing algorithm via module parameter
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:20 +08:00
Marek Lindner
032b7969f8 batman-adv: convert time_after instances to has_timed_out
To increase readability the has_timed_out() functions has been introduced.
This patch converts existing time_after() calls to use this wrapper
function (if applicable).
This patch also converts all timeouts to miliseconds to be consistent.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2012-02-17 02:50:20 +08:00
Marek Lindner
01c4224b51 batman-adv: convert batman iv algorithm to use dynamic infrastructure
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:20 +08:00
Marek Lindner
1c280471b0 batman-adv: add infrastructure to change routing algorithm at runtime
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:20 +08:00
Marek Lindner
6e242f9037 batman-adv: warn if added interface is part of a bridge
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:19 +08:00
Martin Hundebøll
a04ccd5970 batman-adv: Move is_out_of_time() to main.h for general use
Both translation tables and network coding use timeouts to do house
keeping, so we might as well share the function used to compare a
timestamp+timeout with current time.

For readability and simplicity, the function is renamed to
has_timed_out() and uses time_is_before_jiffies() instead of
time_after().

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:19 +08:00
Martin Hundebøll
c51f9c09fa batman-adv: Rm empty line from is_my_mac() in main.c
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:19 +08:00
Marek Lindner
8780dad9e9 batman-adv: simplify bat_ogm_receive API call
Most of the values in that call are derived from the skb, so we can hand
over the skb instead.

Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:19 +08:00
Sven Eckelmann
76543d14ae batman-adv: Explicitly mark the common header structure
All batman-adv packets have a common 3 byte header. It can be used to share
some code between different code paths, but it was never explicit stated that
this header has to be always the same for all packets. Therefore, new code
changes always have the problem that they may accidently introduce regressions
by moving some elements around.

A new structure is introduced that contains the common header and makes it
easier visible that these 3 bytes have to be the same for all on-wire packets.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:19 +08:00
Antonio Quartulli
1707157888 batman-adv: add tt_initialised flag to the orig_node struct
(ttvn == 0) is currently used as initial condition. However this is not a good
idea because ttvn gets the vale zero each time after reaching the maximum value
(wrap around). For this reason a new flag is added in order to define whether a
node has an initialised table or not. Moreover, after invoking
tt_global_del_orig(), tt_initialised has to be set to false

Reported-by: Alexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Tested-by: Alexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:18 +08:00
David S. Miller
220b07e90e batman-adv: Fix merge error.
I didn't resolve the merge properly during the last pull of the net
tree into net-next.

The code in the final resolution should set flags to TT_CLIENT_ROAM
not TT_CLIENT_PENDING.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16 15:07:28 -05:00
David S. Miller
b26e478f8f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/freescale/fsl_pq_mdio.c
	net/batman-adv/translation-table.c
	net/ipv6/route.c
2011-12-16 02:11:14 -05:00
Sven Eckelmann
b5a1eeef04 batman-adv: Only write requested number of byte to user buffer
Don't write more than the requested number of bytes of an batman-adv icmp
packet to the userspace buffer. Otherwise unrelated userspace memory might get
overridden by the kernel.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-12-12 19:11:07 +08:00
Sven Eckelmann
d18eb45332 batman-adv: Directly check read of icmp packet in copy_from_user
The access_ok read check can be directly done in copy_from_user since a failure
of access_ok is handled the same way as an error in __copy_from_user.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-12-12 19:11:06 +08:00
Paul Kot
c00b6856fc batman-adv: bat_socket_read missing checks
Writing a icmp_packet_rr and then reading icmp_packet can lead to kernel
memory corruption, if __user *buf is just below TASK_SIZE.

Signed-off-by: Paul Kot <pawlkt@gmail.com>
[sven@narfation.org: made it checkpatch clean]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-12-12 19:11:06 +08:00
Antonio Quartulli
797399b415 batman-adv: delete global entry in case of roaming
When receiving a DEL change for a client due to a roaming event (change is
marked with TT_CLIENT_ROAM), each node  has to check if the client roamed
to itself or somewhere else.

In the latter case the global entry is kept to avoid having no route at all
otherwise we can safely delete the global entry

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2011-12-07 03:12:59 +08:00
Antonio Quartulli
03fc307045 batman-adv: in case of roaming mark the client with TT_CLIENT_ROAM
In case of a client roaming from node A to node B, the latter have to mark the
corresponding global entry with TT_CLIENT_ROAM (instead of TT_CLIENT_PENDING).

Marking a global entry with TT_CLIENT_PENDING will end up in keeping such entry
forever (because this flag is only meant to be used with local entries and it is
never checked on global ones).

In the worst case (all the clients roaming to the same node A) the local and the
global table will contain exactly the same clients. Batman-adv will continue to
work, but the memory usage is duplicated.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2011-12-07 03:12:55 +08:00
Antonio Quartulli
69497c17c6 batman-adv: format multi-line if in the correct way
in an multi-line if statement leading edges should line up to the opening
parenthesis

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-12-07 02:45:59 +08:00
Dan Carpenter
2ef04f4752 batman-adv: remove extra negation in gw_out_of_range()
There is a typo here where an extra '!' made the check to the opposite
of what was intended.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-12-07 02:45:59 +08:00
Simon Wunderlich
06ba7ce223 batman-adv: use unregister_netdevice() when softif_create fails
When entering softif_create(), the rtnl lock has already been acquired
by store_mesh_iface().
(store_mesh_iface() -> hardif_enable_interface() -> softif_create)

In case of an error, we should therefore call unregister_netdevice()
instead of unregister_netdev().

unregister_netdev() tries to acquire the rtnl lock itself and deadlocks
in this situation. unregister_netdevice() assumes that the rtnl lock
is already been held.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:37 +01:00
Simon Wunderlich
80b3f58cf4 batman-adv: check return value for hash_add()
if hash_add() fails, we should remove the structure to avoid memory
leaks.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:36 +01:00
Antonio Quartulli
697f25314a batman-adv: generalise tt_local_reset_flags()
The tt_local_reset_flags() is actually used for one use case only. It is not
generalised enough to be used indifferent situations. This patch make it general
enough in order to let other code use it whenever a flag set is requested over
the whole hash table (passed as parameter). The function is now called
tt_set_flags()

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:36 +01:00
Antonio Quartulli
48100bac89 batman-adv: create a common substructure for tt_global/local_entry
Several functions in the translation table management code assume that the
tt_global_entry and tt_local_entry structures have the same initial fields such
as 'addr' and 'hash_entry'. To improve the code readability and to avoid
mistakes in later changes, a common substructure that substitute the shared
fields has been introduced (struct tt_common_entry).

Thanks to this modification, it has also been possible to slightly reduce the
code length by merging some functions like compare_ltt/gtt() and
tt_local/global_hash_find()

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:35 +01:00
Marek Lindner
ad24431277 batman-adv: report compat_version in version field in case of version mismatch
Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:35 +01:00
Simon Wunderlich
76e8d7b0d1 batman-adv: Fix range check for expected packets
The check for new packets in the future used a wrong binary operator,
which makes the check expression always true and accepting too many
packets.

Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:35 +01:00
Antonio Quartulli
8b7342d673 batman-adv: check for tt_reponse packet real length
Before accessing the TT_RESPONSE packet payload, the node has to ensure that the
packet is long enough as it would expect to be.

Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:34 +01:00
Antonio Quartulli
dc58fe32e6 batman-adv: linearise the tt_response skb only if needed
The TT_RESPONSE skb has to be linearised only if the node plans to access the
packet payload (so only if the message is directed to that node). In all the
other cases the node can avoid this memory operation

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:34 +01:00
Simon Wunderlich
d099c2c541 batman-adv: directly write tt entries without buffering
When the translation tables (global and local) are written for debugfs,
it is not neccesary to allocate a buffer, we can directly use
seq_printf() to print them out.

This might actually be safer if the table changes between size
calculation and traversal, and we can't estimate the required size
wrong.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:33 +01:00
Antonio Quartulli
c90681b850 batman-adv: fixed hash functions type to uint32_t instead of int
There are two reasons for this fix:
- the result of choose_orig() and vis_choose() is an index and therefore it can't
  be negative. Hence it is correct to make the return type unsigned too.

- sizeof(int) may not be the same on ALL the architectures. Since we plan to use
  choose_orig() as DHT hash function, we need to guarantee that, given the same
  argument, the result is the same. Then it is correct to explicitly express
  the size of the return type (and the second argument). Since the expected
  length is currently 4, uint32_t is the most convenient choice.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:33 +01:00
Antonio Quartulli
eb7e2a1e20 batman-adv: use orig_hash_find() instead of get_orig_node() in TT code
get_orig_node() tries to retrieve an orig_node object based on a mac address
and creates it if not present. This is not the wanted behaviour in the
translation table code as we don't want to create new orig_code objects but
expect a NULL pointer if the object does not exist.

Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:32 +01:00
Marek Lindner
be7af5cf9c batman-adv: refactoring gateway handling code
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:32 +01:00
Sven Eckelmann
25a92b138d batman-adv: Replace obsolete strict_strto<foo> with kstrto<foo>
strict_strto<foo> is obsolete since v3.1-rc8-8466-g14acc55 and should be
replaced with kstrto<foo>.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:31 +01:00
Antonio Quartulli
87944973d9 batman-adv: tt_global_del_orig() has to print the correct message
When deleting the entries, tt_global_del_orig() has to print the message passed
as argument instead of a static one.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:31 +01:00
Sven Eckelmann
c20186b90f batman-adv: update internal version number
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-11-20 13:08:20 +01:00
David S. Miller
9eeebb5bc8 Merge branch 'batman-adv/maint' of git://git.open-mesh.org/linux-merge 2011-10-30 03:05:07 -04:00