Commit Graph

2225 Commits

Author SHA1 Message Date
Ingo Molnar
36e8e57832 [PATCH] lockdep: annotate idescsi_pc_intr()
idescsi_pc_intr() uses local_irq_enable() in IRQ context: annotate it.

(this has no effect on kernels with lockdep disabled.  On kernels with lockdep
enabled this means that we wont actually disable interrupts, and the warning
message will go away as well.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:32 -07:00
Greg Kroah-Hartman
f834c75542 Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 2006-08-26 13:04:23 -07:00
Mike Christie
0db99e3359 [SCSI] fix scsi_send_eh_cmnd regression
The callers of scsi_send_eh_cmnd are setting the cmnd buffer,
and then scsi_send_eh_cmnd is copying that updated buffer to
the old_cmnd variable. Then after the command runs, we end up
copying that old_cmnd var which has the new cmnd to the scsi
command buffer. When this command gets recent, all types of fun
things happen like getting TUR or START_STOP commands with
data and scatterlists.

This patch made against scsi-rc-fixes, has the callers of
scsi_send_eh_cmnd pass in the command so scsi_send_eh_cmnd
can do the right thing. This should go into 2.6.18 since this
fixes a regression added when we removed some of the scsi_cmnd
fields and replaced them with local variables.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-26 10:03:14 -05:00
Andrew Vasquez
15a3758dc9 [SCSI] qla2xxx: Update version number to 8.01.07-k1.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-26 09:26:57 -05:00
Andrew Vasquez
476e8978d9 [SCSI] qla2xxx: Properly re-enable EFT support after an ISP abort.
Software must explicitely re-enable extended firmware tracing
after any ISP abort condition.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-26 09:26:41 -05:00
Andrew Vasquez
9c06938aa4 [SCSI] qla2xxx: Correct PLOGI retry logic.
Original code attempts to retry PLOGIs to fcports that are
FCP_TARGETs only.  If the driver never performed a successful
PLOGI/PRLI, the port-type would never be assigned, and the
relogin logic would silently drop the request (and thus the port
would not be recognized and registered).

The fix is relatively straightforward, drop the FCP_TARGET-only
check.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-26 09:26:27 -05:00
Douglas Gilbert
b2155d0417 [SCSI] sg: fix incorrect page problem
There's a problem where sg is executing a ->nopage operation on a
compound page, it actually calls get_page() on the first page in the
compound rather than the page which is being mapped.  The fix is to
select the correct page by indexing into the compound.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-26 09:25:06 -05:00
Greg Kroah-Hartman
7bf13484d2 Merge branch 'upstream-greg' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev 2006-08-24 01:28:14 -07:00
Tejun Heo
ac2164d5e4 [PATCH] sata_via: use old SCR access pattern on vt6420
vt6420 has super-fragile SCR registers which can hang the whole
machine if accessed with the wrong timings.  This patch makes sata_via
use SCR registers only during probing and with the same timings as
before (pre new EH), which is proven to work.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 02:51:24 -04:00
Tejun Heo
9dd9c16465 [PATCH] ata_piix: implement force_pcs module parameter
This patch implements force_pcs module parameter for ata_piix.  If 1,
PCS is ignored, 2 honored.  As there seem to be quite a few ICHs w/
impaired PCS, this option will be useful for cases where the default
setting doesn't work.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 02:51:24 -04:00
Tejun Heo
f3745a3f9f [PATCH] ata_piix: ignore PCS on ICH5
There have been a number of reports regarding some ICH5s failing to
detect devices since the PCS handling update.  Analysis shows that
these problems are caused by bogus PCS values from those controllers.

Before the PCS update, the driver didn't honor PCS regs exactly and
probed them in many cases PCS reports no device.  Now that PCS is
honored exactly, these hardware problems are visible.

This patch makes ICH5 ignore PCS.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 02:51:24 -04:00
David S. Miller
25848c4e50 [SCSI] esp: Fix build on SUN4.
Noted by Alexey Dobriyan.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-23 15:33:07 -07:00
Tejun Heo
f1a58ecae5 [PATCH] ata_piix: fix ghost device probing by honoring PCS present bits
Move out PCS handling from piix_sata_prereset() into
piix_sata_present_mask() and use it from newly implemented
piix_sata_softreset().  Class codes for devices which are indicated to
be absent by PCS are cleared to ATA_DEV_NONE.  This fixes ghost device
problem reported on ICH6 and 7.

This patch moves PCS handling from prereset to softreset, which makes
two behavior changes.

* perform softreset even when PCS indicates no device
* PCS handling is repeated before retrying softresets due to reset
  failures.

Both behavior changes are intended and more consistent with how other
drivers behave.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-22 06:07:48 -04:00
Jeff Garzik
d14b50cc60 Merge branch 'master' into upstream-fixes 2006-08-19 17:27:12 -04:00
James Smart
48e2691f9c [SCSI] lpfc 8.1.9 : Change version number to 8.1.9
Change version number to 8.1.9

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 13:46:47 -07:00
James Smart
a90f56847e [SCSI] lpfc 8.1.9 : Stall eh handlers if resetting while rport blocked
Stall error handler if attempting resets/aborts while an rport is blocked.
This avoids device offline scenarios due to errors in the error handler.

Background:
  Although the transport is using the scsi_timed_out functionality to
  restart the timeout if the rport is blocked, if the timeout has already
  fired before the block occurs, the eh handler still runs and can take
  the device offline. Ultimately, this window cannot be resolved without
  significant work in the error handler thread. Christoph noted the first
  level of these issues when he noted the poor error response handling
  by the error thread.

  We found, under heavy load and error testing, that time window from when
  the scsi_times_out() adds the io to the queue to when the scsi_error_handler
  gets around to servicing it, can be in the several seconds range. In most
  cases, these test conditions are highly unusual, but possible.
  As a result, we're stalling the error handler in this race window so that
  we can avoid the device_offline transitions.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 13:46:30 -07:00
James Smart
33ccf8d108 [SCSI] lpfc 8.1.9 : Misc Bug Fixes
Misc Bug Fixes:
- Cap MBX_DOWN_LINK command timeout to 60 seconds
- Fix double free of ndlp object
- Don't free mbox structures on error. The completion handlers expect to do so.
- Clear host attention work items when going offline
- Fixed discovery issues in multi-initiator environments.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 13:46:05 -07:00
Greg Kroah-Hartman
f8872f4cb4 Merge gregkh@master.kernel.org:/home/rmk/linux-2.6-arm 2006-08-10 15:07:17 -07:00
Martin Hicks
a34b6fc04d [PATCH] libata: PHY reset requires writing 0x4 to SControl
Hi,

Reading the Intel VSC and AHCI it seems like writing 0x302 is incorrect.
The only valid values are 4, 1 and 0.  Writing 4 disables the
PHY.

Signed-off-by: Martin Hicks <mort@bork.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 08:29:12 -04:00
Albert Lee
51704c609f [PATCH] libata: Use ATA_FLAG_PIO_POLLING for pdc_adma
pdc_adma was overlooked and broken by the irq-pio patch:
Only HSM_ST_LAST interrupts should be delivered to this LLDD.

Adding ATA_FLAG_PIO_POLLING to pdc_adma fixes the problem (temporarily),
before we convert the irq handler of pdc_adma to handle all interrupts.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 06:55:18 -04:00
Tejun Heo
22aac0896b [PATCH] libata: clear sdev->locked on door lock failure
SCSI EH locks door if sdev->locked is set.  Sometimes door lock
command fails continuously (e.g. when medium is not present) and as
libata uses EH to acquire sense data, this easily creates a loop where
a failed lock door invokes EH and EH issues lock door on completion.

This patch clears sdev->locked on door lock failure to break this
loop.  This problem has been spotted and diagnosed by Unicorn Chang
<uchang@tw.ibm.com>.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-09 01:16:27 -04:00
Keith Owens
85455dd342 [PATCH] Fix compile problem when sata debugging is on
Fix a sata debug print statement that still uses an old variable name.

Signed-off-by: Keith Owens <kaos@ocs.com.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-09 01:16:27 -04:00
Russell King
574dc0abab [ARM] Fix Acorn platform SCSI driver build failures
SCSI folk forgot to fix up all the uses of 'buffer' before deleting
this struct member.  Do it for them to rescue the resulting build
failures.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-06 20:55:33 +01:00
Russell King
ca8c100a00 [ARM] Fix NCR5380-based SCSI card build
The NCR5380-based SCSI cards need the SCSI SPI transport selected
to build correctly.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-06 20:53:40 +01:00
Christoph Hellwig
3e74051bc7 [SCSI] hptiop: backout ioctl mess
The hptiop just got merged with a horrible amount of really bad ioctl
code that is against the standards for new scsi drivers.  This patch
backs it out (and fixes a small bug where scsi_add_host is called to
early).  We can re-add proper APIs once we agree on them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 13:19:56 -05:00
James Bottomley
00dd7b7d26 Merge ../linux-2.6
Conflicts:

	arch/ia64/hp/sim/simscsi.c

Stylistic differences in two separate fixes for buffer->request_buffer
problem.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 12:42:33 -05:00
Andrew Vasquez
c2602c48b5 [SCSI] qla2xxx: Update version number to 8.01.05-k4.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:30:41 -05:00
Vladislav Bolkhovitin
b0328beed0 [SCSI] qla2xxx: Fix to allow to reset devices using sg interface (sg_reset).
Currently it is impossible to reset provided by Qlogic QLA2xxx driver
SCSI devices externally using corresponding sg devices, particularly via
sg_reset utility, because qla2xxx driver in qla2xxx_eh_device_reset()
function checks if the input scsi_cmnd has its private data (CMD_SP())
attached. Then the found pointer isn't used anywhere inside of
qla2xxx_eh_device_reset(). If the RESET request comes from sg device, it
doesn't have such private data.

The attached patch removes check for non-NULL CMD_SP() from
qla2xxx_eh_device_reset(), hence allows to reset QLA2xxx's devices using
corresponding sg devices.

AV: change applies to bus/host reset handlers as well.

Signed-off-by: Vladislav Bolkhovitin <vst@vlnb.net>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:30:28 -05:00
Andrew Vasquez
45ebeb5605 [SCSI] qla2xxx: Log Trace/Diagonostic asynchronous events.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:30:10 -05:00
Shyam Sundar
b797b6de9d [SCSI] qla2xxx: Correct endianess problem while issuing a Marker IOCB on ISP24xx.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:29:45 -05:00
James Smart
416780d3a7 [SCSI] lpfc 8.1.7 : Change version number to 8.1.8
Change version number to 8.1.8

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:29:11 -05:00
James Smart
dca9479be8 [SCSI] lpfc 8.1.7 : ID String and Message fixes
ID String and Message fixes
 - Fix switch symbolic name registration to match cross-OS values
 - Replace printk's with more standard lpfc_printf_log calls
 - Make all lpfc_printf_log message numbers unique

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:28:55 -05:00
James Smart
8f6d98d2e0 [SCSI] lpfc 8.1.7 : Short bug fixes
Short bug fixes:
 - Fix iocbq list corruption due to missing list_del's in ct handling
 - Missing unlock in lpfc_sli_next_iotag()
 - Fix initialization of can_queue value
 - Differentiate sysfs mailbox errors with different codes.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:28:41 -05:00
James Smart
1c067a4241 [SCSI] lpfc 8.1.7 : Fix race condition between lpfc_sli_issue_mbox and lpfc_online
Fix race condition between lpfc_sli_issue_mbox and lpfc_online

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:28:22 -05:00
James Smart
a309a6b6e6 [SCSI] lpfc 8.1.7 : Fix failing firmware download due to mailbox delays needing to be longer
Fix failing firmware download due to mailbox delays needing to be longer.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:28:03 -05:00
James Smart
64ba881829 [SCSI] lpfc 8.1.7 : Add statistics reset callback for FC transport
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:27:31 -05:00
Tejun Heo
77f3f87938 [PATCH] libata: fix ata_device_add() error path
In the error path, ata_device_add()

* dereferences null host_set->ports[] element.
* calls scsi_remove_host() on not-yet-added shost.

This patch fixes both bugs.  The first problem was spotted and initial
patch submitted by Dave Jones <davej@redhat.com>.  The second problem
was mentioned and fixed by Jeff Garzik <jgarzik@pobox.com> in a larger
cleanup patch.

Cc: Dave Jones <davej@redhat.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-05 03:59:19 +09:00
Jeff Garzik
6543bc0777 [PATCH] [libata] manually inline ata_host_remove()
(tj: this is for the following ata_device_add() fix)

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-05 03:59:17 +09:00
Tejun Heo
f31e945c50 [PATCH] sata_sil24: don't set probe_ent->mmio_base
sata_sil24 doesn't make use of probe_ent->mmio_base and setting this
field causes the area to be released twice on detach.  Don't set
probe_ent->mmio_base.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-05 03:59:15 +09:00
Tejun Heo
f814b75f4e [PATCH] ata_piix: fix host_set private_data intialization
To get host_set->private_data initialized reliably, all pinfos need to
point to the same hpriv.  Restore pinfo->private_data after pata pinfo
assignment.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-05 03:59:13 +09:00
Tejun Heo
c3cf30a989 [PATCH] libata: fix ata_port_detach() for old EH ports
ata_prot_detach() did nothing for old EH ports and thus SCSI hosts
associated with those ports are left dangling after they are detached
leaving stale devices and causing oops eventually.  Make
ata_port_detach() remove SCSI hosts for old EH ports.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-05 03:59:11 +09:00
Unicorn Chang
f1d39b291e [PATCH] ahci: skip protocol test altogether in spurious interrupt code
Skip protocol test altogether in spurious interrupt code. If PIOS is received
when it shouldn't, ahci will raise protocol violation.

Signed-off-by: Unicorn Chang <uchang@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03 17:34:52 -04:00
Sam Ravnborg
dba654d150 kbuild: hardcode value of YACC&LEX for aic7-triple-x
When we introduced -rR then aic7xxx no loger could pick up definition
of YACC&LEX from make - so do it explicit now.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-08-01 11:32:46 +02:00
Jeff Garzik
ab3b3fd381 Merge branch 'master' into upstream-fixes 2006-07-29 01:39:17 -04:00
Ju, Seokmann
0b4972d591 [SCSI] megaraid_{mm,mbox}: a fix on "kernel unaligned access address" issue
There was an issue in the data structure defined by megaraid driver
casuing "kernel unaligned access.." messages to be displayed during
IOCTL on IA64 platform.

The issue has been reported/fixed by Sakurai Hiroomi
[sakurai_hiro@soft.fujitsu.com].

Signed-Off By: Seokmann Ju <seokmann.ju@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28 13:19:12 -05:00
Ju, Seokmann
aa677bc744 [SCSI] megaraid_{mm,mbox}: a fix on INQUIRY with EVPD
With this patch, driver will protect data corruption created by
INQUIRY with EVPD request to megaraid controllers.  As specified in
the changelog, megaraid F/W already has fixed the issue and being
under process of release. Meanwhile, driver will protect the system
with this patch.

Signed-Off By: Seokmann Ju <seokmann.ju@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28 13:13:50 -05:00
Ju, Seokmann
fbf6080225 [SCSI] megaraid_{mm,mbox}: 64-bit DMA capability checker
This patch contains
- a fix for 64-bit DMA capability check in megaraid_{mm,mbox} driver.
- includes changes (going back to 32-bit DMA mask if 64-bit DMA mask
failes) suggested by James with previous patch.
- addition of SATA 150-4/6 as commented by Vasily Averin.

With patch, the driver access PCIconfiguration space with dedicated
offset to read a signature. If the signature read, it means that the
controller has capability to handle 64-bit DMA.
Without this patch, the driver used to blindly claim 64-bit DMA
capability.
The issue has been reported by Vasily Averin [vvs@sw.ru].
Thank you Vasily for the reporting.

Signed-Off By: Seokmann Ju <seokmann.ju@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28 13:10:23 -05:00
Mike Christie
f4246b33c7 [SCSI] iscsi bugfixes: update and move version number
The version info is useful for iscsi tcp, iser and qla4xxx so move to
transport class.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28 11:50:18 -05:00
Mike Christie
f3ff0c3627 [SCSI] iscsi bugfixes: fix mem leaks in libiscsi
We were leaking some strings. This patch just frees them.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28 11:50:02 -05:00
Mike Christie
40527afea1 [SCSI] iscsi bugfixes: pass errors from complete_pdu to caller
Must pass ISCSI_ERR values from the recv path and propogate them
upwards.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28 11:49:50 -05:00