Commit Graph

90 Commits

Author SHA1 Message Date
Jan Kara
4408ea41c0 quota: Fix possible oops in __dquot_initialize()
When quotaon(8) races with __dquot_initialize() or dqget() fails because
of EIO, ENOSPC, or similar error, we could possibly dereference NULL pointer
in inode->i_dquot[cnt]. Add proper checking.

Reported-by: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28 01:30:06 +02:00
Jan Kara
86f3cbec4a quota: Fix issuing of warnings from dquot_transfer
__dquot_transfer accidentally called flush_warnings for a wrong set of
dquots which could result in quota warnings being issued with a wrong
identification. Also when operation fails because of EDQUOT, there's no
need check for issuing information message about user getting below limits
(no transfer has actually happened).

Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28 01:30:03 +02:00
Dmitry
9e32784b71 quota: fix dquot_disable vs dquot_transfer race v2
I've got following lockup:
dquot_disable                              dquot_transfer
                                            ->dqget()
					       sb_has_quota_active
dqopt->flags &= ~dquot_state_flag(f, cnt)      atomic_inc(dq->dq_count)
 ->drop_dquot_ref(sb, cnt);
    down_write(dqptr_sem)
    inode->i_dquot[cnt] = NULL              ->__dquot_transfer
invalidate_dquots(sb, cnt);		       down_write(&dqptr_sem)
  ->wait for dq_wait_unused		       inode->i_dquot = new_dquot
  /* wait forever */                            ^^^^New quota user^^^^^^

We cannot allow new references to dquots from inodes after drop_dquot_ref()
has removed them.  We have to recheck quota state under dqptr_sem and before
assignment, as we do it in dquot_initialize().

Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28 01:30:02 +02:00
Jan Kara
80f44b152c quota: Make QUOTACTL config be selected by its users
Remove "depends on" line from QUOTACTL config option and rather select
the option explicitely from config options which need it. It makes more
sense this way and also fixes Kconfig warning due to GFS2 selecting
QUOTACTL but QUOTACTL not depending on it.

Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-05 12:16:37 +02:00
Linus Torvalds
5f248c9c25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
  no need for list_for_each_entry_safe()/resetting with superblock list
  Fix sget() race with failing mount
  vfs: don't hold s_umount over close_bdev_exclusive() call
  sysv: do not mark superblock dirty on remount
  sysv: do not mark superblock dirty on mount
  btrfs: remove junk sb_dirt change
  BFS: clean up the superblock usage
  AFFS: wait for sb synchronization when needed
  AFFS: clean up dirty flag usage
  cifs: truncate fallout
  mbcache: fix shrinker function return value
  mbcache: Remove unused features
  add f_flags to struct statfs(64)
  pass a struct path to vfs_statfs
  update VFS documentation for method changes.
  All filesystems that need invalidate_inode_buffers() are doing that explicitly
  convert remaining ->clear_inode() to ->evict_inode()
  Make ->drop_inode() just return whether inode needs to be dropped
  fs/inode.c:clear_inode() is gone
  fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
  ...

Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-10 11:26:52 -07:00
Al Viro
a4ffdde6e5 simplify checks for I_CLEAR/I_FREEING
add I_CLEAR instead of replacing I_FREEING with it.  I_CLEAR is
equivalent to I_FREEING for almost all code looking at either;
it's there to keep track of having called clear_inode() exactly
once per inode lifetime, at some point after having set I_FREEING.
I_CLEAR and I_FREEING never get set at the same time with the
current code, so we can switch to setting i_flags to I_FREEING | I_CLEAR
instead of I_CLEAR without loss of information.  As the result of
such change, checks become simpler and the amount of code that needs
to know about I_CLEAR shrinks a lot.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:44 -04:00
Linus Torvalds
90e0c22596 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  ext3: Fix dirtying of journalled buffers in data=journal mode
  ext3: default to ordered mode
  quota: Use mark_inode_dirty_sync instead of mark_inode_dirty
  quota: Change quota error message to print out disk and function name
  MAINTAINERS: Update entries of ext2 and ext3
  MAINTAINERS: Update address of Andreas Dilger
  ext3: Avoid filesystem corruption after a crash under heavy delete load
  ext3: remove vestiges of nobh support
  ext3: Fix set but unused variables
  quota: clean up quota active checks
  quota: Clean up the namespace in dqblk_xfs.h
  quota: check quota reservation on remove_dquot_ref
2010-08-07 12:57:07 -07:00
Jan Kara
43d2932d88 quota: Use mark_inode_dirty_sync instead of mark_inode_dirty
Quota code never touches file data. It just modifies i_blocks + i_bytes
of inodes and inode flags of quota files. So use mark_inode_dirty_sync
instead of mark_inode_dirty.

Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-23 12:50:46 +02:00
Jiaying Zhang
fb5ffb0e16 quota: Change quota error message to print out disk and function name
The current quota error message doesn't always print the disk name, so
it is hard to identify the "bad" disk when quota error happens.

This patch changes the standardized quota error message to print out disk name
and function name. It also uses a combination of cpp macro and inline function
to provide better type checking and to lower the text size of the message.

[Jan Kara: Export __quota_error]

Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:05:58 +02:00
Christoph Hellwig
189eef59e7 quota: clean up quota active checks
The various quota operations check for any quota beeing active on
a superblock, and the inode not having the noquota flag.

Merge these two checks into a dquot_active check and move that
into dquot.c as that's the only place where it's needed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:01:47 +02:00
Christoph Hellwig
ade7ce31c2 quota: Clean up the namespace in dqblk_xfs.h
Almost all identifiers use the FS_* namespace, so rename the missing few
XFS_* ones to FS_* as well.  Without this some people might get upset
about having too many XFS names in generic code.

Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:01:46 +02:00
Dmitry Monakhov
7af9cce8ae quota: check quota reservation on remove_dquot_ref
Reserved space must being claimed before remove_dquot_ref() for a
given inode. Filesystem is responsible for performing force blocks
allocation in case of dealloc in ->quota_off. Let's add sanity check
for that case. Do it similar to add_dquot_ref().

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:01:46 +02:00
Dave Chinner
7f8275d0d6 mm: add context argument to shrinker callback
The current shrinker implementation requires the registered callback
to have global state to work from. This makes it difficult to shrink
caches that are not global (e.g. per-filesystem caches). Pass the shrinker
structure to the callback so that users can embed the shrinker structure
in the context the shrinker needs to operate on and get back to it in the
callback via container_of().

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-07-19 14:56:17 +10:00
Linus Torvalds
d28619f156 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  quota: Convert quota statistics to generic percpu_counter
  ext3 uses rb_node = NULL; to zero rb_root.
  quota: Fixup dquot_transfer
  reiserfs: Fix resuming of quotas on remount read-write
  pohmelfs: Remove dead quota code
  ufs: Remove dead quota code
  udf: Remove dead quota code
  quota: rename default quotactl methods to dquot_
  quota: explicitly set ->dq_op and ->s_qcop
  quota: drop remount argument to ->quota_on and ->quota_off
  quota: move unmount handling into the filesystem
  quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers
  quota: move remount handling into the filesystem
  ocfs2: Fix use after free on remount read-only

Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c
2010-05-30 09:11:11 -07:00
Linus Torvalds
e4ce30f377 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
  ext4: Make fsync sync new parent directories in no-journal mode
  ext4: Drop whitespace at end of lines
  ext4: Fix compat EXT4_IOC_ADD_GROUP
  ext4: Conditionally define compat ioctl numbers
  tracing: Convert more ext4 events to DEFINE_EVENT
  ext4: Add new tracepoints to track mballoc's buddy bitmap loads
  ext4: Add a missing trace hook
  ext4: restart ext4_ext_remove_space() after transaction restart
  ext4: Clear the EXT4_EOFBLOCKS_FL flag only when warranted
  ext4: Avoid crashing on NULL ptr dereference on a filesystem error
  ext4: Use bitops to read/modify i_flags in struct ext4_inode_info
  ext4: Convert calls of ext4_error() to EXT4_ERROR_INODE()
  ext4: Convert callers of ext4_get_blocks() to use ext4_map_blocks()
  ext4: Add new abstraction ext4_map_blocks() underneath ext4_get_blocks()
  ext4: Use our own write_cache_pages()
  ext4: Show journal_checksum option
  ext4: Fix for ext4_mb_collect_stats()
  ext4: check for a good block group before loading buddy pages
  ext4: Prevent creation of files larger than RLIMIT_FSIZE using fallocate
  ext4: Remove extraneous newlines in ext4_msg() calls
  ...

Fixed up trivial conflict in fs/ext4/fsync.c
2010-05-27 10:26:37 -07:00
Dmitry Monakhov
f32764bd2b quota: Convert quota statistics to generic percpu_counter
Generic per-cpu counter has some memory overhead but it is negligible for
modern systems and embedded systems compile without quota support.  And code
reuse is a good thing. This patch should fix complain from preemptive kernels
which was introduced by dde9588853.

[Jan Kara: Fixed patch to work on 32-bit archs as well]

Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-27 18:56:27 +02:00
Jan Kara
4dea496974 quota: Fixup dquot_transfer
Commit bc8e5f0739 had a typo which caused
quota miscomputation when changing owner group of a file. Linus will hate
me.

Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-27 17:39:36 +02:00
Christoph Hellwig
287a80958c quota: rename default quotactl methods to dquot_
Follow the dquot_* style used elsewhere in dquot.c.

[Jan Kara: Fixed up missing conversion of ext2]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:10:17 +02:00
Christoph Hellwig
123e9caf1e quota: explicitly set ->dq_op and ->s_qcop
Only set the quota operation vectors if the filesystem actually supports
quota instead of doing it for all filesystems in alloc_super().

[Jan Kara: Export dquot_operations and vfs_quotactl_ops]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:10:17 +02:00
Christoph Hellwig
307ae18a56 quota: drop remount argument to ->quota_on and ->quota_off
Remount handling has fully moved into the filesystem, so all this is
superflous now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:09:12 +02:00
Christoph Hellwig
0f0dd62fdd quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers
Instead of having wrappers in the VFS namespace export the dquot_suspend
and dquot_resume helpers directly.  Also rename vfs_quota_disable to
dquot_disable while we're at it.

[Jan Kara: Moved dquot_suspend to quotaops.h and made it inline]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-24 14:06:40 +02:00
Al Viro
01a05b337a new helper: iterate_supers()
... and switch the simple "loop over superblocks and do something"
loops to it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:16 -04:00
Al Viro
35cf7ba0b4 Bury __put_super_and_need_restart()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:16 -04:00
Al Viro
6754af6464 Convert simple loops over superblocks to list_for_each_entry_safe
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:15 -04:00
Al Viro
551de6f34d Leave superblocks on s_list until the end
We used to remove from s_list and s_instances at the same
time.  So let's *not* do the former and skip superblocks
that have empty s_instances in the loops over s_list.

The next step, of course, will be to get rid of rescan logics
in those loops.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-21 18:31:14 -04:00
Jiaying Zhang
1907131bbe dquot: Detect partial write error to quota file in write_blk() and add printk_ratelimit for quota error messages
This patch changes quota_tree.c:write_blk() to detect error caused by partial
write to quota file and add a macro to limit control printed quota error
messages so we won't fill up dmesg with a corrupted quota file.

Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:49 +02:00
Jan Kara
bc8e5f0739 quota: Refactor dquot_transfer code so that OCFS2 can pass in its references
Currently, __dquot_transfer() acquires its own references of dquot structures
that will be put into inode. But for OCFS2, this creates a lock inversion
between dq_lock (waited on in dqget) and transaction start (started in
ocfs2_setattr). Currently, deadlock is impossible because dq_lock is acquired
only during dquot_acquire and dquot_release and we already hold a reference to
dquot structures in ocfs2_setattr so neither of these functions can be called
while we call dquot_transfer. But this is rather subtle and it is hard to teach
lockdep about it. So provide __dquot_transfer function that can be passed dquot
references directly. OCFS2 can then pass acquired dquot references directly to
__dquot_transfer with proper locking.

Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:45 +02:00
Dmitry Monakhov
12755627bd quota: unify quota init condition in setattr
Quota must being initialized if size or uid/git changes requested.
But initialization performed in two different places:
in case of i_size file system is responsible for dquot init
, but in case of uid/gid init will be called internally in
dquot_transfer().
This ambiguity makes code harder to understand.
Let's move this logic to one common helper function.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:45 +02:00
Christoph Hellwig
fcbc59f96e quota: remove sb_has_quota_active in get/set_info
The methods already do these checks, so remove them in the quotactl
implementation to allow non-VFS quota implementations to also support
these calls.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:45 +02:00
Christoph Hellwig
c472b43275 quota: unify ->set_dqblk
Pass the larger struct fs_disk_quota to the ->set_dqblk operation so
that the Q_SETQUOTA and Q_XSETQUOTA operations can be implemented
with a single filesystem operation and we can retire the ->set_xquota
operation.  The additional information (RT-subvolume accounting and
warn counts) are left zero for the VFS quota implementation.

Add new fieldmask values for setting the numer of blocks and inodes
values which is required for the VFS quota, but wasn't for XFS.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:44 +02:00
Christoph Hellwig
b9b2dd36c1 quota: unify ->get_dqblk
Pass the larger struct fs_disk_quota to the ->get_dqblk operation so
that the Q_GETQUOTA and Q_XGETQUOTA operations can be implemented
with a single filesystem operation and we can retire the ->get_xquota
operation.  The additional information (RT-subvolume accounting and
warn counts) are left zero for the VFS quota implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:43 +02:00
Dmitry Monakhov
dde9588853 quota: Make quota stat accounting lockless.
Quota stats is mostly writable data structure. Let's alloc percpu
bucket for each value.

NOTE: dqstats_read() function is racy against dqstats_{inc,dec}
and may return inconsistent value. But this is ok since absolute
accuracy is not required.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:41 +02:00
Sergey Senozhatsky
da8d1ba22f suppress warning: "quotatypes" defined but not used
Suppress compilation warning: "quotatypes" defined but not used.
quotatypes is used only when CONFIG_QUOTA_DEBUG or CONFIG_PRINT_QUOTA_WARNING
is/are defined.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:41 +02:00
Dmitry Monakhov
eabf290d14 quota: optimize mark_dirty logic
- Skip locking if quota is dirty already.
- Return old quota state to help fs-specciffic implementation to optimize
  case where quota was dirty already.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:37 +02:00
Eric Sandeen
0e05842bc1 quota: add the option to not fail with EDQUOT in block
To simplify metadata tracking for delalloc writes, ext4
will simply claim metadata blocks at allocation time, without
first speculatively reserving the worst case and then freeing
what was not used.

To do this, we need a mechanism to track allocations in
the quota subsystem, but potentially allow that allocation
to actually go over quota.

This patch adds a DQUOT_SPACE_NOFAIL flag and function
variants for this purpose.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-16 10:00:00 -04:00
Eric Sandeen
56246f9ae4 quota: use flags interface for dquot alloc/free space
Switch __dquot_alloc_space and __dquot_free_space to take flags
to indicate whether to warn and/or to reserve (or free reserve).

This is slightly more readable at the callpoints, and makes it
cleaner to add a "nofail" option in the next patch.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-16 09:00:00 -04:00
Jan Kara
62af9b5205 quota: Convert __DQUOT_PARANOIA symbol to standard config option
Make __DQUOT_PARANOIA define from the old days a standard config option
and turn it off by default.

This gets rid of a quota warning about writes before quota is turned on
for systems with ext4 root filesystem. Currently there's no way to legally
solve this because /etc/mtab has to be written before quota is turned on
on most systems.

Signed-off-by: Jan Kara <jack@suse.cz>
2010-04-20 18:25:25 +02:00
Andrew Perepechko
08261673cb quota: Fix possible dq_flags corruption
dq_flags are modified non-atomically in do_set_dqblk via __set_bit calls and
atomically for example in mark_dquot_dirty or clear_dquot_dirty.  Hence a
change done by an atomic operation can be overwritten by a change done by a
non-atomic one. Fix the problem by using atomic bitops even in do_set_dqblk.

Signed-off-by: Andrew Perepechko <andrew.perepechko@sun.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-04-12 21:12:36 +02:00
Jan Kara
4c5e6c0e70 quota: Hide warnings about writes to the filesystem before quota was turned on
For a root filesystem write to the filesystem before quota is turned on happens
regularly and there's no way around it because of writes to syslog, /etc/mtab,
and similar. So the warning is rather pointless for ordinary users. It's
still useful during development so we just hide the warning behind
__DQUOT_PARANOIA config option.

Signed-off-by: Jan Kara <jack@suse.cz>
2010-04-12 21:12:19 +02:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Christoph Hellwig
efd8f0e6f6 quota: stop using QUOTA_OK / NO_QUOTA
Just use 0 / -EDQUOT directly - that's what it translates to anyway.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:31 +01:00
Christoph Hellwig
871a293155 dquot: cleanup dquot initialize routine
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:30 +01:00
Christoph Hellwig
907f4554e2 dquot: move dquot initialization responsibility into the filesystem
Currently various places in the VFS call vfs_dq_init directly.  This means
we tie the quota code into the VFS.  Get rid of that and make the
filesystem responsible for the initialization.   For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.

For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.

For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.

Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:30 +01:00
Christoph Hellwig
9f75475802 dquot: cleanup dquot drop routine
Get rid of the drop dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_drop helper to __dquot_drop
and vfs_dq_drop to dquot_drop to have a consistent namespace.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:30 +01:00
Christoph Hellwig
b43fa8284d dquot: cleanup dquot transfer routine
Get rid of the transfer dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_transfer helper to __dquot_transfer
and vfs_dq_transfer to dquot_transfer to have a consistent namespace,
and make the new dquot_transfer return a normal negative errno value
which all callers expect.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:29 +01:00
Christoph Hellwig
63936ddaa1 dquot: cleanup inode allocation / freeing routines
Get rid of the alloc_inode and free_inode dquot operations - they are
always called from the filesystem and if a filesystem really needs
their own (which none currently does) it can just call into it's
own routine directly.

Also get rid of the vfs_dq_alloc/vfs_dq_free wrappers and always
call the lowlevel dquot_alloc_inode / dqout_free_inode routines
directly, which now lose the number argument which is always 1.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:28 +01:00
Christoph Hellwig
5dd4056db8 dquot: cleanup space allocation / freeing routines
Get rid of the alloc_space, free_space, reserve_space, claim_space and
release_rsv dquot operations - they are always called from the filesystem
and if a filesystem really needs their own (which none currently does)
it can just call into it's own routine directly.

Move shared logic into the common __dquot_alloc_space,
dquot_claim_space_nodirty and __dquot_free_space low-level methods,
and rationalize the wrappers around it to move as much as possible
code into the common block for CONFIG_QUOTA vs not.  Also rename
all these helpers to be named dquot_* instead of vfs_dq_*.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:28 +01:00
Jan Kara
ab94c39b6f quota: Properly invalidate caches even for filesystems with blocksize < pagesize
Sometimes invalidate_bdev() can fail to invalidate a part of block
device cache because of dirty data. If the filesystem has blocksize
smaller than page size, this can happen even for pages containing
quota files and thus kernel would operate on stale data. Fix the
issue by syncing the filesystem before invalidating the cache.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:27 +01:00
Dmitry Monakhov
8ddd69d6df quota: generalize quota transfer interface
Current quota transfer interface support only uid/gid.
This patch extend interface in order to support various quotas types
The goal is accomplished without changes in most frequently used
vfs_dq_transfer() func.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:26 +01:00
Dmitry Monakhov
ad1e6e8da9 quota: sb_quota state flags cleanup
- remove hardcoded USRQUOTA/GRPQUOTA flags
- convert int to bool for appropriate functions

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:26 +01:00