In several places, the driver keeps times (in jiffies) in two 32-bit
quantities. In the rtl8192_hw_to_sleep(), there is an error in the
calculation of the difference between two 64-bit quantities. Rather
than fix that error, I have converted to a single 64-bit number. That
makes the code be much cleaner and clearer.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and
port 1 for the UART
They use the same VID and PID as FTDI Chip but they program the manufacturer
name in the eeprom
So use this information to detect it
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes all the errors and most of the warnings generated by
checkpatch -f for rtllib_softmac_tx.c..
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
This patch removes all the errors and warnings generated by
checkpatch -f for rtllib_softmac_wx.c..
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
With this patch, all of the checkpatch errors are fixed; however, only
some of the lines that are too long were fixed. To complete the fixing
of these warnings, the file rtllib_softmac.c will need refactoring. In addition,
some of the variables may need renaming. Those changes can be deferred.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
With this patch, all of the checkpatch errors are fixed; however, only
some of the lines that are too long were fixed. To complete the fixing
of these warnings, the file rtl_dm.c will need refactoring. In addition,
some of the variables will need renaming. Those changes can be deferred.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
With this patch, all of the checkpatch errors are fixed; however, only
some of the lines that are too long were fixed. To complete the fixing
of these warnings, the file rtl_dm.c will need refactoring. In addition,
some of the variables will need renaming. Those changes can be deferred.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Convert multiple BRCMF_<debug_level> macros to a single
brcmf_dbg(level, fmt, ...) macro.
Remove the now unnecessary double parentheses in the uses
of the old macros when converting to brcmf_dbg.
Delete all uses of "%s: [fmt]", __func__, args... and move
the "%s: ", __func__ to the macro for consistency.
Coalesce long formats.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Commit c03f007a8b (OMAP: PM:
omap_device: add system PM methods for PM domain handling) mistakenly
used SET_SYSTEM_SLEEP_PM_OPS() when trying to configure custom methods
for the PM domains noirq methods. Fix that by setting only the
suspend_noirq and resume_noirq methods with custom versions.
Note that all other PM domain methods (including the "normal"
suspend/resume methods) are populated using USE_PLATFORM_PM_SLEEP_OPS,
which configures them all to the default subsystem (platform_bus)
methods.
Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
The description of pm_runtime_irq_safe() has to be updated to follow
the code after commit 02b2677 (PM / Runtime: Allow _put_sync() from
interrupts-disabled context).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Kevin Hilman <khilman@ti.com>
Headphones has stopped working for the original reported (a regression
compared to 2.6.38). This is because Speaker and Headphones share the
same DAC, in which case no Headphones volume control was created.
This patch fixes so that both Speaker and Headphones volume
controls are created in such scenario.
BugLink: http://bugs.launchpad.net/bugs/817943
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In several places, the driver keeps times (in jiffies) in two 32-bit
quantities. In the rtl8192_hw_to_sleep(), there is an error in the
calculation of the difference between two 64-bit quantities. Rather
than fix that error, I have converted to a single 64-bit number. That
makes the code be much cleaner and clearer.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
In commit a144c6a6c9 ("PM: Print a warning if firmware is requested
when tasks are frozen") we not only printed a warning if somebody tried
to load the firmware when tasks are frozen - we also failed the load.
But that check was done before the check for built-in firmware, and then
when we disallowed usermode helpers during bootup (commit 288d5abec8:
"Boot up with usermodehelper disabled"), that actually means that
built-in modules can no longer load their firmware even if the firmware
is built in too. Which used to work, and some people depended on it for
the R100 driver.
So move the test for usermodehelper_is_disabled() down, to after
checking the built-in firmware.
This should fix:
https://bugzilla.kernel.org/show_bug.cgi?id=40952
Reported-by: James Cloos <cloos@hjcloos.com>
Bisected-by: Elimar Riesebieter <riesebie@lxtec.de>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Rafael Wysocki <rjw@sisk.pl>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-31-rc3/i2c-fixes' of git://git.fluff.org/bjdooks/linux:
i2c-nomadik: fix kerneldoc warning
Revert "i2c-omap: fix static suspend vs. runtime suspend"
i2c-nomadik: Do not use _interruptible_ variant call
There was a missing struct item in the kerneldoc, add it and fix
another pretty-printing formatting issue with a missing space.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This was needed by one of the generic serial drivers that was removed a
while ago. No one even noticed that the driver could not be built
properly while it was in the staging directory.
So this removed the unneeded .h file.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Seen on v3.1-rc3, patch:
omap: mcbsp: Drop in-driver transfer support
bafe2721a0
Removed code that now cause tidspbridge to break while compiling.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete version information, it's just noise and serves no purpose.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch converts the nvec to use mfd cells and improves the
registration of the platform driver. The child drivers are also
converted to use mfd cells and platform registration.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stop exporting functions only intended for core usage.
Return void from function which can never return anything other than 0.
Trivial stype cleanups.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Need this out the way to create a trigger_consumer.h that actually is
for trigger consumers.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The device is static and should never actually be deleted. The release
is just to avoid a warning from the kernel.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is to do with dynamically allocated triggers and the need to ensure
the underlying structures don't go away when a consumer is using them.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
