Commit Graph

21 Commits

Author SHA1 Message Date
Roland Dreier
f3781d2e89 RDMA: Remove subversion $Id tags
They don't get updated by git and so they're worse than useless.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:44 -07:00
Robert P. J. Day
157de22946 IB: Use shorter list_splice_init() for brevity
Convert list_splice() + INIT_LIST_HEAD() to the equivalent list_splice_init()

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:09:26 -07:00
Pete Wyckoff
331552925d IB/fmr_pool: Flush all dirty FMRs from ib_fmr_pool_flush()
Commit a3cd7d90 ("IB/fmr_pool: ib_fmr_pool_flush() should flush all
dirty FMRs") caused a regression for iSER and was reverted in
e5507736.

This change attempts to redo the original patch so that all used FMR
entries are flushed when ib_flush_fmr_pool() is called without
affecting the normal FMR pool cleaning thread.  Simply move used
entries from the clean list onto the dirty list in ib_flush_fmr_pool()
before letting the cleanup thread do its job.

Signed-off-by: Pete Wyckoff <pw@osc.edu>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-29 13:31:48 -08:00
Pete Wyckoff
35fb5340e3 Revert "IB/fmr_pool: ib_fmr_pool_flush() should flush all dirty FMRs"
This reverts commit a3cd7d9070.

The original commit breaks iSER reliably, making it complain:

    iser: iser_reg_page_vec:ib_fmr_pool_map_phys failed: -11

The FMR cleanup thread runs ib_fmr_batch_release() as dirty entries
build up.  This commit causes clean but used FMR entries also to be
purged.  During that process, another thread can see that there are no
free FMRs and fail, even though there should always have been enough
available.

Signed-off-by: Pete Wyckoff <pw@osc.edu>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-29 13:29:19 -08:00
Or Gerlitz
1d96354e61 IB/fmr_pool: Allocate page list for pool FMRs only when caching enabled
Allocate memory for the page_list field of struct ib_pool_fmr only
when caching is enabled for the FMR pool, since the field is not used
otherwise.  This can save significant amounts of memory for large
pools with caching turned off.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04 20:20:44 -08:00
Olaf Kirch
a3cd7d9070 IB/fmr_pool: ib_fmr_pool_flush() should flush all dirty FMRs
When a FMR is released via ib_fmr_pool_unmap(), the FMR usually ends
up on the free_list rather than the dirty_list (because we allow a
certain number of remappings before actually requiring a flush).

However, ib_fmr_batch_release() only looks at dirty_list when flushing
out old mappings.  This means that when ib_fmr_pool_flush() is used to
force a flush of the FMR pool, some dirty FMRs that have not reached
their maximum remap count will not actually be flushed.

Fix this by flushing all FMRs that have been used at least once in
ib_fmr_batch_release().

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:43 -08:00
Olaf Kirch
a656eb758f IB/fmr_pool: Flush serial numbers can get out of sync
Normally, the serial numbers for flush requests and flushes executed
for an FMR pool should be in sync.

However, if the FMR pool flushes dirty FMRs because the
dirty_watermark was reached, we wake up the cleanup thread and let it
do its stuff.  As a side effect, the cleanup thread increments
pool->flush_ser, which leaves it one higher than pool->req_ser.  The
next time the user calls ib_flush_fmr_pool(), the cleanup thread will
be woken up, but ib_flush_fmr_pool() won't wait for the flush to
complete because flush_ser is already past req_ser.  This means the
FMRs that the user expects to be flushed may not have all been flushed
when the function returns.

Fix this by telling the cleanup thread to do work exclusively by
incrementing req_ser, and by moving the comparison of dirty_len and
dirty_watermark into ib_fmr_pool_unmap().

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
2008-01-25 14:15:42 -08:00
Anton Blanchard
3f776e8a25 IB/fmr_pool: Stop ib_fmr threads from contributing to load average
I noticed my machine was at a constant load average of 1. This was
because ib_create_fmr_pool calls kthread_create but does not
immediately wake the thread up.

Change to using kthread_run so we enter ib_fmr_cleanup_thread(), set
TASK_INTERRUPTIBLE, then go to sleep.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30 14:57:43 -07:00
Anton Blanchard
8a68bbe31d IB/fmr_pool: Clean up some error messages in fmr_pool.c
A number of printks in fmr_pool.c dont have newlines, eg:

    fmr_create failed for FMR 0<5>FS-Cache: Loaded

Fix them up.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09 19:59:05 -07:00
Roland Dreier
1a70a05d9d IB/fmr_pool: Add prefix to all printks
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-06 21:18:11 -07:00
Roland Dreier
38abaa63bf IB/core: Fix sparse warnings about shadowed declarations
Change a couple of variable names to avoid sparse warnings about
symbols being shadowed.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 14:41:14 -08:00
Roland Dreier
f47e22c6e4 IB/fmr: ib_flush_fmr_pool() may wait too long
ib_flush_fmr_pool() stashes away the request generation number
properly, but then goes ahead and rereads it every time it tests
whether the flush generation number has caught up.  This means that
there is a theoretical possibility of livelock, if the request
generation number keeps getting bumped and the flush generation number
never catches up.  The fix is simple: use the request generation
number read at the beginning of the function.

Also, atomic_inc() followed by atomic_read() can be replaced with
atomic_int_return().  There's no real requirement for atomicity here
but we might as well shrink the code.

This bug was discovered using David Binderman's list of "set but never
used" warnings from icc.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12 11:50:19 -08:00
Michael S. Tsirkin
adfaa888a2 [PATCH] fmr pool: remove unnecessary pointer dereference
ib_fmr_pool_map_phys gets the virtual address by pointer but never writes
there, and users (e.g.  srp) seem to assume this and ignore the value
returned.  This patch cleans up the API to get the VA by value, and updates
all users.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Acked-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14 21:53:51 -07:00
Or Gerlitz
6c8c1aa25d IB/fmr: Use device's max_map_map_per_fmr attribute in FMR pool.
When creating a FMR pool, query the IB device and use the returned
max_map_map_per_fmr attribute as for the max number of FMR remaps. If
the device does not suport querying this attribute, use the original
IB_FMR_MAX_REMAPS (32) default.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:37 -07:00
Or Gerlitz
d36f34aadf IB: Enable FMR pool user to set page size
This patch allows the consumer to set the page size of "pages" mapped
by the pool FMRs, which is a feature already existing in the base
verbs API.  On the cosmetic side it changes ib_fmr_attr.page_size field
to be named page_shift.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20 10:08:10 -08:00
Roland Dreier
a4d61e8480 [PATCH] IB: move include files to include/rdma
Move the InfiniBand headers from drivers/infiniband/include to include/rdma.
This allows InfiniBand-using code to live elsewhere, and lets us remove the
ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:38 -07:00
Roland Dreier
ffbf4c34f1 [PATCH] IB: unmap FMRs when destroying FMR pool
Make sure that all FMRs are unmapped before we deallocate them so that
we don't leak references to our protection domain when destroying an
FMR pool.  (Bug reported by Guy German <guyg@voltaire.com>)

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 20:37:36 -07:00
Hal Rosenstock
c183a4c335 [PATCH] IB: Update FMR functions
Change some functions to return void rather than an int since they are always
returning 0, thus making checking return values rather pointless.

Signed-off-by: Tom Duffy <tduffy@sun.com>
Signed-off-by: Libor Michalek <libor@topspin.com>
Signed-off-by: Hal Rosenstock <halr@voltaire.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:09 -07:00
Libor Michalek
20aa65699c [PATCH] IB: Trivial FMR printk cleanup
Add missing newline in printk.

Signed-off-by: Libor Michalek <libor@topspin.com>
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:11 -07:00
Roland Dreier
de0d9641c4 [PATCH] IB: Fix FMR pool crash
Mask bits correctly from jhash result in ib_fmr_hash() so that the
computed bucket index is within our hash table.  This fixes an SDP
crash.

Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:10 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00