Commit Graph

62 Commits

Author SHA1 Message Date
Paul Mackerras
79acbb3ff2 Merge branch 'linux-2.6' into for-linus 2006-12-04 15:59:07 +11:00
Christian Krafft
36ca4ba4b9 [POWERPC] cell: add cpufreq driver for Cell BE processor
This patch adds a cpufreq backend driver to enable frequency scaling on cell.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 14:20:22 +10:00
Christian Krafft
b3d7dc1967 [POWERPC] cell: add temperature to SPU and CPU sysfs entries
This patch adds a module that registers sysfs attributes to CPU and SPU
containing the temperature of the CBE.

They can be found under
/sys/devices/system/spu/cpuX/thermal/temperature[0|1]
/sys/devices/system/spu/spuX/thermal/temperature

The temperature is read from the on-chip temperature sensors.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 14:20:22 +10:00
Arnd Bergmann
b910ecf6bf [POWERPC] cell: update defconfig
===================================================================

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 12:10:41 +10:00
Andy Whitcroft
7516795739 [PATCH] Reintroduce NODES_SPAN_OTHER_NODES for powerpc
Reintroduce NODES_SPAN_OTHER_NODES for powerpc

Revert "[PATCH] Remove SPAN_OTHER_NODES config definition"
    This reverts commit f62859bb68.
Revert "[PATCH] mm: remove arch independent NODES_SPAN_OTHER_NODES"
    This reverts commit a94b3ab7ea.

Also update the comments to indicate that this is still required
and where its used.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Kravetz <kravetz@us.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-21 13:35:06 -07:00
Timur Tabi
ee4ea82c07 [POWERPC] Add DOS partition table support to mpc834x_itx_defconfig
The default configuration file for the MPC8349E-mITX reference board,
mpc834x_itx_defconfig, did not include support for DOS partition table types.
This support is necessary because the hard drive that comes with the ITX
is formatted with this partition table type.  Without this config option,
no partitions on the drive can be mounted.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-16 15:52:14 +10:00
Benjamin Herrenschmidt
8de242e60a [POWERPC] Update maple defconfig
This updates the Maple defconfig to 4 CPUs (along with current defaults)
to support the "tigerwood" 970MP evaluation board.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-10 11:54:26 +10:00
Stephen Rothwell
b75f3f751c [POWERPC] Update iseries_defconfig
This make sure that an iseries_defconfig does not inlude
other platforms.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-07 10:10:17 +10:00
Brian King
3afbf5d6ef [POWERPC] Update pSeries defconfig for SATA
Since the ipr driver now supports SATA and depends on libata,
enable libata to get built.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-06 21:10:41 +10:00
Arnd Bergmann
68272047c5 [POWERPC] Update cell_defconfig
This adds defaults for new configuration options added since
2.6.18 and it enables the option for 64kb pages by default.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-05 09:21:02 +10:00
Li Yang
bc141deafb [POWERPC] Add MPC8360EMDS board support
The patch adds MPC8360EMDS board support.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Yin Olivia <hong-hua.yin@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 15:24:27 +10:00
Paul Mackerras
4e6d816e51 Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/vitb/linux-2.6-PQ 2006-09-28 07:18:28 +10:00
Olaf Hering
2cec1b452c [POWERPC] update powerpc defconfig files after libata kconfig breakage
Update defconfig files after libata .config breakage

 sed -i 's/CONFIG_SCSI_SATA_/CONFIG_SATA_/;s/CONFIG_SCSI_SATA/CONFIG_ATA/' arch/powerpc/configs/*g

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-26 15:41:03 +10:00
Olaf Hering
0eab40ffad [POWERPC] enable sysrq in pmac32_defconfig
Enable sysrq also for pmac32

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-26 15:41:03 +10:00
Kim Phillips
8306e511d2 [POWERPC] update mpc8349_itx_defconfig and remove some debug settings
update mpc8349_itx_defconfig and turn off some debug settings

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-26 15:24:35 +10:00
Vitaly Bordug
902f392d01 POWERPC: Add support for the mpc8560 eval board
This makes the 8560 evaluation board fully supported under arch/powerpc,
as the first board with CPM2 SoC peripherals. The brand new devicetree
nodes are introduced (intending to be a subset of the QuiccEngine-equipped
models, with dts sources placed into the kernel according to the new convention.

Assuming all the preceding stuff applied (PAL+fs_enet related+ CPM_UART
update), the both TSEC eth ,FCC Eths, and both SCC UARTs are
working. The relevant drivers are still capable to drive users in ppc,
which was verified with 8272ADS (SCC uart+FCC eth).

This is also verified on mpc8540 and actually make it work (PCI stuff
working as well)

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-21 22:31:26 +04:00
Paul Mackerras
c547fc28ab Merge branch 'linux-2.6' 2006-09-14 07:07:18 +10:00
Paul Mackerras
fb7d527c1a [POWERPC] Update defconfigs
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-10 11:04:36 +10:00
Paul Mackerras
aa43f77939 Merge branch 'merge' 2006-08-31 15:45:48 +10:00
Kim Phillips
f1f17716d1 [POWERPC] modify mpc83xx platforms to use new IRQ layer
This fixes MPC834x MDS (formerly SYS) and ITX platform code to get IRQ data (including PCI) from the device tree, and to use the new IPIC code.

renamed defconfig (sys -> mds), left one redundant NULL assignment in mpc83xx_pcibios_fixup to keep the compiler happy.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30 10:34:33 +10:00
Paul Mackerras
ea0763a7e6 Merge branch 'merge' 2006-08-25 14:56:07 +10:00
Will Schmidt
90bdde362c [POWERPC] update {g5,iseries,pseries}_defconfigs
Updating the defconfigs for iseries, pseries, and G5.   Sticking with
the defaults, with the following exceptions:  I've turned off HW_RANDOM
for all three configs.   For G5, I've enabled SND_AOA and friends as
modules; this includes the FABRIC_LAYOUT, ONYX, TAS, TOONIE and
SOUNDBUS* config options.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-17 16:41:10 +10:00
Amos Waterland
3ab2b385c8 [POWERPC] Turn on tigon3 support in maple_defconfig
I think that most people who use maple_defconfig are doing so for a JS21,
so it might make sense to turn Tigon3 support on by default.

Built and booted on a JS21.

Signed-off-by: Amos Waterland <apw@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-08 17:07:02 +10:00
Johannes Berg
d1a8df9136 [POWERPC] fix up front-LED Kconfig
This patch fixes the front-LED Kconfig issues I introduced while
creating it. Apparently having a dependency isn't enough to have the
select not evaluated or something like that.

The patch also changes the default configuration for pmac32 select the
default for the LED to be the IDE trigger. While I was at it, I
completely updated the defconfig and also added snd-aoa to it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-26 01:26:08 +10:00
Johannes Berg
3a09aa4730 [POWERPC] fix up front-LED Kconfig
Rather long patch, apparently no one has updated the pmac32_defconfig in
a while.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07 20:19:15 +10:00
Kumar Gala
71bc7bf045 Merge branch '83xx' into for_paulus 2006-07-03 16:08:21 -05:00
Kim Phillips
913b83944b powerpc: add defconfig for Freescale MPC8349E-mITX board
Provide default configuration for the Freescale MPC8349E-mITX board, including
the on-board 16MB flash.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-07-03 15:44:33 -05:00
Paul Mackerras
4ce631e7a2 [POWERPC] Add a default config for 32-bit CHRP machines
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 16:36:17 +10:00
Zang Roy-r61911
975b365895 [POWERPC] mpc7448hpc2 (taiga) board config file
Add default config for mpc7448 hpc2 (taiga) board.

Signed-off-by: Roy Zang	<tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-29 16:20:36 +10:00
Michael Ellerman
6b7290be0c [POWERPC] Enable XMON in cell_defconfig
Now that we have the udbg callbacks we can enable XMON by default.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 11:59:48 +10:00
Geoff Levand
c01ea72a3b [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts
Creates new config variables PPC_CELL_NATIVE and PPC_IBM_CELL_BLADE.
The existing CONFIG_PPC_CELL is now used to denote the generic
Cell processor support.

PPC_CELL = make descends into platforms/cell
PPC_CELL_NATIVE = add bare metal support
PPC_IBM_CELL_BLADE = add blade device drivers, etc.

Also renames spu_priv1.c to spu_priv1_mmio.c.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21 15:01:31 +10:00
arnd@arndb.de
0f0f90c304 [POWERPC] cell: update defconfig
Enable some of the most requested features in defconfig
and refresh with the latest powerpc.git Kconfig files.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21 15:01:29 +10:00
Benjamin Herrenschmidt
acf7d76827 [POWERPC] cell: add RAS support
This is a first version of support for the Cell BE "Reliability,
Availability and Serviceability" features.

It doesn't yet handle some of the RAS interrupts (the ones described in
iic_is/iic_irr), I'm still working on a proper way to expose these. They
are essentially a cascaded controller by themselves (sic !) though I may
just handle them locally to the iic driver. I need also to sync with
David Erb on the way he hooked in the performance monitor interrupt.

So that's all for 2.6.17 and I'll do more work on that with my rework of
the powerpc interrupt layer that I'm hacking on at the moment.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21 15:01:29 +10:00
Jon Loeliger
96abe9358b [POWERPC] Add mpc8641_hpcn_defconfig config file.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21 15:01:28 +10:00
Anton Blanchard
6fe8767531 [POWERPC] update pmac32_defconfig
Some updates to the pmac32_defconfig to make it more useful:

- Enable LSF (large single files) since we enable LBD (large block devices)
- Enable IPSEC related options
- Enable remaining raid/dm options as modules
- Disable eth1394, I doubt any has that hardware and it has a nasty habit of
  auto loading first and skewing network device numbering
- Enable dummy and tun as modules, always useful to have them around
- Enable EHCI, no wonder my usb2 disk was so slow
- Enable USB storage
- Enable ext3 acls
- Disable autofs and enable autofsv4 instead
- Enable nfs v3/v4 client and server. Dont want to be left in the dark ages
  of pre v3
- Enable all crypto as modules, things like cryptsetup want some of them

I havent enabled the BCM43xx, perhaps we should now?

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 19:31:26 +10:00
Anton Blanchard
f2b09c8189 [POWERPC] Update pseries defconfig
pseries defconfig updates:

- Enable jsm and re-enable qlogic FC drivers as modules.
- Enable ocfs2, autofs4 and fuse filesystems as modules.
- Enable Kprobes.
- Enable ebus, binfmt_misc, sas attrs, md5 reshape, hvc rtas backend and
  some infiniband options.
- Finally disable debug options: DEBUG_MUTEXES and DEBUG_STACK_USAGE.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 19:31:26 +10:00
Paul Mackerras
29f147d746 Merge branch 'merge' 2006-04-29 16:15:57 +10:00
Arnd Bergmann
6fb8f3acbe [PATCH] powerpc: update cell_defconfig
reflect the changes to Kconfig since the last update.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-29 15:11:30 +10:00
Paul Mackerras
55308c3712 Merge branch 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc 2006-04-22 19:47:47 +10:00
Will Schmidt
5ad1bfeaf7 [PATCH] powerpc: update {g5,iseries,pseries}_defconfigs
Default choices for all.

Signed-off-by: Will Schmidt <willschm@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-21 22:34:03 +10:00
Andy Fleming
591f0a4287 Add 85xx CDS to arch/powerpc
This patch adds support for 85xx CDS support to arch/powerpc

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-04-04 16:09:18 -05:00
Kumar Gala
9cf8ca3871 powerpc: Make uImage default build output for MPC8540 ADS
When we build for the MPC8540 ADS produce a uImage by default.
Updated the defconfig to reflect this as well.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-03-27 23:44:37 -06:00
Arnd Bergmann
1a19f85584 [PATCH] powerpc: update cell defconfig
The default configuration in mainline got a little out of
sync with what we use internally.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 14:48:16 +11:00
Paul Mackerras
23dd640112 Merge ../linux-2.6 2006-03-17 12:01:19 +11:00
Paul Mackerras
1ae5db3742 powerpc: update defconfigs
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16 16:55:08 +11:00
Olaf Hering
e2c552cc89 [PATCH] powerpc/64: enable CONFIG_BLK_DEV_SL82C105
Enable the onboard IDE driver for p610, p615 and p630.
They have the CD connected to this card. All other RS/6000 systems with this
controller have no connectors and dont need this option.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16 16:54:59 +11:00
Paul Mackerras
a00428f5b1 Merge ../powerpc-merge 2006-02-24 14:05:47 +11:00
Olof Johansson
7c375b9aba [PATCH] powerpc: Update {g5,pseries,ppc64}_defconfig
Update defconfigs for g5, pseries and generic ppc64. Default choices
for everything, with the following exceptions:

 * Enable WINDFARM_PM112 on g5 and ppc64.
 * Increase CONFIG_NR_CPUS to 4 in g5_defconfig
 * CONFIG_TIGON3=y instead of =m in g5_defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 11:36:35 +11:00
Becky Bruce
63dafe5728 [PATCH] powerpc: Updated Initial MPC8540 ADS port with OF Flat Dev
Updated patch for support for mpc8540_ads in arch/powerpc with a
flat OF device tree. This patch does not yet support PCI or I2C.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-20 16:11:06 +11:00
Jesse Brandeburg
35ec56bb78 [PATCH] e1000: Added disable packet split capability
Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware.  Made this a CONFIG option and modified the Kconfig, to reflect the new option.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18 16:17:57 -05:00