Commit Graph

133 Commits

Author SHA1 Message Date
Peter Meerwald
693cc078dc OMAPFB: remove unused FB_OMAP_BOOTLOADER_INIT config option
code depending on FB_OMAP_BOOTLOADER_INIT has been removed long before
(e.g. Tomi Valkeinen, 03 Mar 2011: OMAP: DSS2: Remove FB_OMAP_BOOTLOADER_INIT
support), but the option still exists Kconfig and has no use

Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-04-23 10:48:09 +03:00
Linus Torvalds
1bfecd9358 ARM: board specific updates
These changes are all specific to one board only. We're trying to keep
 the number of board files low, but generally board level updates are
 ok on platforms that are working on moving towards DT based probing,
 which will eventually lead to removing them.
 
 The board-ams-delta.c board file gets a conflict between the removal of
 ams_delta_config and the addition of a lot of other data. The Kconfig
 file has two changes in the same line, and in exynos, the power domain
 cleanup conflicts with the addition of the image sensor device.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 [olof: Amended a fix for a mismerge to board-omap4panda.c]
 Signed-off-by: Olof Johansson <olof@lixom.net>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPckIXAAoJEIwa5zzehBx35uUP/jns0renNAMmiu2vBHGQtn4z
 xiNXjDTJ8DeD4mKf17rjn/uaJgQ0w3Doq2nEsi5rPqLK4Uqqk+NG1zYa77QBWHbx
 FUgBPz+oViTDkanp4G8cygXvGfNkb1GvuJxEBvxQ1mwuG4JhwlFbQxGIaS8ZwOAN
 DIyVCgSXy40B+748RwdZ2AY7CYvWiQWrQYsIH6NO0rtZIXjyV0kIsyVtEXZpqWtF
 xNz2HHXVMrui2JQ7FQ0zZglY8+YCxjeJk4v++FfqCJiMzU1yZJw7E30NjhcWAaR6
 odJM2YIyhvunxPfx3ZUHimsNjfU+l/0uXgDHeLFSWVyIjPFXwqZDi/6onP3FI4Jc
 sIoTSwDAQpnZJ6KffAYkcyyfsWN61GOE96Xa2eRb6+78CEiMh7vJ8TIRieiOWxjm
 NbB0xzaKxa97F/8z7w6V6Z4dNhnokWJZvtJdgLZUYAqIgnxstFkJZ9+Tqt77G4t3
 5iSbIMeFPsfh5sUeAVjr5+zVeUOm9PTRI0n0RY+Wd16Ke6DO1qobKAYOzrzI5idz
 k7ni76/zgGn3NS5F3TxdRHowkeGUwUU6poyopgQ0pyscDylVpzgMIqmAwLdzrVp5
 joVEoKi6h4oqhAZtiysXuF85bUfCW0ziDUuib07SX8wcEIAIr+mWob1Ei+wJrefe
 g0Ch3ZbCRQMOwSOQ70Ci
 =HPiJ
 -----END PGP SIGNATURE-----

Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: board specific updates" from Arnd Bergmann/Olof Johansson:
 "These changes are all specific to one board only.  We're trying to
  keep the number of board files low, but generally board level updates
  are ok on platforms that are working on moving towards DT based
  probing, which will eventually lead to removing them.

  The board-ams-delta.c board file gets a conflict between the removal
  of ams_delta_config and the addition of a lot of other data.  The
  Kconfig file has two changes in the same line, and in exynos, the
  power domain cleanup conflicts with the addition of the image sensor
  device.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>
  [olof: Amended a fix for a mismerge to board-omap4panda.c]
  Signed-off-by: Olof Johansson <olof@lixom.net>"

Fixed up some fairly trivial conflicts manually.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (82 commits)
  i.MX35-PDK: Add Camera support
  ARM : mx35: 3ds-board: add framebuffer device
  pxa/hx4700: Remove pcmcia platform_device structure
  ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35%
  ARM: pxa/hx4700: Remove unwanted request for GPIO105
  ARM: EXYNOS: support Exynos4210-bus Devfreq driver on Nuri board
  ARM: EXYNOS: Register JPEG on nuri
  ARM: EXYNOS: Register JPEG on universal_c210
  ARM: S5PV210: Enable JPEG on SMDKV210
  ARM: S5PV210: Add JPEG board definition
  ARM: EXYNOS: Enable JPEG on Origen
  ARM: EXYNOS: Enable JPEG on SMDKV310
  ARM: EXYNOS: Add __init attribute to universal_camera_init()
  ARM: EXYNOS: Add __init attribute to nuri_camera_init()
  ARM: S5PV210: Enable FIMC on SMDKC110
  ARM: S5PV210: Enable FIMC on SMDKV210
  ARM: S5PV210: Enable MFC on SMDKC110
  ARM: S5PV210: Enable MFC on SMDKV210
  ARM: EXYNOS: Enable G2D on SMDKV310
  ARM: tegra: update defconfig
  ...
2012-03-27 16:27:28 -07:00
Florian Tobias Schandinat
e9fe8a714e Merge branch 'for-3.4' of git://gitorious.org/linux-omap-dss2/linux into fbdev-next 2012-03-20 08:49:51 +00:00
Janusz Krzysztofik
da564a05b3 ARM: OMAP1: ams-delta: clean up init data section assignments
The main purpose of this patch is to fix several section mismatch
warnings from the board file and a few board specific drivers,
introduced with recent Amstrad Delta patch series, some of them rising
up only when building with CONFIG_MODULES not set.

While being at it, section tagging of all init data found in the board
file have been revised and hopefully corrected and/or optimized.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-01 15:20:26 -08:00
Tomi Valkeinen
ae7e1f2d0b OMAPFB: remove remaining OMAP arch checks
Now that the old omapfb driver is only omap1 display driver, there's no
need to check if the arch is omap1. This patch removes the few remaining
checks for the arch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2012-02-23 09:39:35 +02:00
Tomi Valkeinen
8f5e35a794 OMAPFB: Move old omapfb private structs to a private include file
include/linux/omapfb.h contains structs that are used only by the
omapfb driver. Move the structs into drivers/video/omap/omapfb.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-23 09:39:19 +02:00
Tomi Valkeinen
80277566d0 OMAPFB: remove mem info from platform_data
omapfb driver used platform_data to get fb memory areas and formats
defined by the board file.

This patch removes omapfb's (both old and new omapfb) use of the
memory data in platform_data, because:

- No board uses them currently
- It's not board file's job to define things like amount of default
  framebuffer memory. These should come from the bootloader via command
  line parameters.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-23 09:39:18 +02:00
Tomi Valkeinen
58e0d6ab02 OMAP: N770: remove HWA742 platform data
In an effort to clean up the old omapfb driver, this patch removes
HWA742 (the display chip used in N770) platform data. This can be done
as N770 is the only user of HWA742, and the platform data contains only
one field, te_connected, which we can just presume to be true in the
HWA742 driver.

This allows us to remove omapfb_set_ctrl_platform_data(), and the
mechanism to pass the platform data, in a later patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2012-02-23 09:39:05 +02:00
Tomi Valkeinen
1896e2f145 OMAPFB: Remove video SRAM support (old omapfb)
OMAP SRAM can be used as video memory on OMAP1 and 2. However, there
usually is very little SRAM available, thus limiting its use, and no
board supported by the kernel currently uses it.

This patch removes the use of SRAM as video ram for the old omapfb
driver to simplify memory handling.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2012-02-23 09:38:54 +02:00
Tomi Valkeinen
8dc50ec775 OMAPFB: Remove OMAP2/3 support from old omapfb driver
Old omapfb driver (drivers/video/omap/) is no longer used for OMAP2+
devices, and thus we can remove OMAP2+ support from it and make it an
OMAP1 omapfb driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-22 10:55:29 +02:00
Tomi Valkeinen
fdcb68884b OMAPFB: remove old blizzard driver
N8x0's blizzard driver has been ported to new omapdss driver, so we can
now remove the old blizzard driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-22 10:55:29 +02:00
Axel Lin
c6d242aa64 video: convert drivers/video/* to use module_spi_driver()
This patch converts the drivers in drivers/video/* to use the
module_spi_driver() macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Imre Deak <imre.deak@nokia.com>
Cc: Roger Quadros <roger.quadros@nokia.com>
Cc: Steve Sakoman <steve@sakoman.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Gražvydas Ignotas <notasas@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 20:59:38 +00:00
Jingoo Han
f8bd493456 video: use gpio_request_one
Using gpio_request_one can make the code simpler because it can
set the direction and initial value in one shot.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-01-28 20:50:11 +00:00
Tony Lindgren
967809bd7f Merge branch 'omap1-part2' into omap1
Conflicts:
	drivers/leds/leds-ams-delta.c
2012-01-20 05:31:52 -08:00
Linus Torvalds
51be08419d Merge branch 'fbdev-next' of git://github.com/schandinat/linux-2.6
* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (175 commits)
  module_param: make bool parameters really bool (drivers/video/i810)
  Revert "atmel_lcdfb: Adjust HFP calculation so it matches the manual."
  OMAPDSS: HDMI: Disable DDC internal pull up
  OMAPDSS: HDMI: Move duplicate code from boardfile
  OMAPDSS: add OrtusTech COM43H4M10XTC display support
  OMAP: DSS2: Support for UMSH-8173MD TFT panel
  ASoC: OMAP: HDMI: Move HDMI codec trigger function to generic HDMI driver
  OMAPDSS: HDMI: Create function to enable HDMI audio
  ASoC: OMAP: HDMI: Correct signature of ASoC functions
  ASoC: OMAP: HDMI: Introduce driver data for audio codec
  grvga: fix section mismatch warnings
  video: s3c-fb: Don't keep device runtime active when open
  video: s3c-fb: Hold runtime PM references when touching registers
  video: s3c-fb: Take a runtime PM reference when unblanked
  video: s3c-fb: Disable runtime PM in error paths from probe
  video: s3c-fb: Use s3c_fb_enable() to enable the framebuffer
  video: s3c-fb: Make runtime PM functional again
  drivers/video: fsl-diu-fb: merge fsl_diu_alloc() into map_video_memory()
  drivers/video: fsl-diu-fb: add default platform ops functions
  drivers/video: fsl-diu-fb: remove broken reference count enabling the display
  ...
2012-01-14 15:11:19 -08:00
Rusty Russell
90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Linus Torvalds
98793265b4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
  Kconfig: acpi: Fix typo in comment.
  misc latin1 to utf8 conversions
  devres: Fix a typo in devm_kfree comment
  btrfs: free-space-cache.c: remove extra semicolon.
  fat: Spelling s/obsolate/obsolete/g
  SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
  tools/power turbostat: update fields in manpage
  mac80211: drop spelling fix
  types.h: fix comment spelling for 'architectures'
  typo fixes: aera -> area, exntension -> extension
  devices.txt: Fix typo of 'VMware'.
  sis900: Fix enum typo 'sis900_rx_bufer_status'
  decompress_bunzip2: remove invalid vi modeline
  treewide: Fix comment and string typo 'bufer'
  hyper-v: Update MAINTAINERS
  treewide: Fix typos in various parts of the kernel, and fix some comments.
  clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
  gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
  leds: Kconfig: Fix typo 'D2NET_V2'
  sound: Kconfig: drop unknown symbol ARCH_CLPS7500
  ...

Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
2012-01-08 13:21:22 -08:00
Florian Tobias Schandinat
193984f43d Merge branch 'for-florian' of git://gitorious.org/linux-omap-dss2/linux into fbdev-next 2012-01-08 15:30:34 +00:00
Al Viro
d36b691077 misc latin1 to utf8 conversions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 13:04:55 +01:00
Axel Lin
f806f9b6b8 video: omap: convert drivers/video/omap/* to use module_platform_driver()
This patch converts the drivers in drivers/video/omap/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.

Cc: Jonathan McDowell <noodles@earth.li>
Cc: Cory Maccarrone <darkstar6262@gmail.com>
Cc: Laurent Gonzalez <palmte.linux@free.fr>
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-02 08:51:25 +02:00
Axel Lin
f990544125 video: omap: Staticise non-exported symbols
These symbols are not used outside it's driver so no need to
make the symbol global.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-01-02 08:51:25 +02:00
Janusz Krzysztofik
a218d19f6a omapfb: lcd_ams_delta: drive control lines over GPIO
Don't use Amstrad Delta custom I/O functions any longer, use GPIO API
instead.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-22 09:00:46 -08:00
Lars-Peter Clausen
9056df19c2 video: Remove redundant spi driver bus initialization
In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register(),
so we can drop the manual assignment.

The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
	.driver = {
-		.bus = &spi_bus_type,
	},
};
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-12-03 22:05:56 +00:00
Tomi Valkeinen
1c6bc89972 OMAPFB: fix compilation warnings due to missing include
Fix warnings similar to this by including module.h:

drivers/video/omap/dispc.c:276:1: warning: data definition has no type
or storage class
drivers/video/omap/dispc.c:276:1: warning: type defaults to 'int' in
declaration of 'EXPORT_SYMBOL'

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-11-18 10:09:17 +02:00
Paul Gortmaker
355b200bac video: Add module.h to drivers/video files who really use it.
They were getting this implicitly by an include of module.h
from device.h -- but we are going to clean that up and break
that include chain, so include module.h explicitly now.

[ with contributions from Axel Lin <axel.lin@gmail.com> ]

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:33 -04:00
Linus Torvalds
acff987d94 Merge branch 'fbdev-next' of git://github.com/schandinat/linux-2.6
* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (270 commits)
  video: platinumfb: Add __devexit_p at necessary place
  drivers/video: fsl-diu-fb: merge diu_pool into fsl_diu_data
  drivers/video: fsl-diu-fb: merge diu_hw into fsl_diu_data
  drivers/video: fsl-diu-fb: only DIU modes 0 and 1 are supported
  drivers/video: fsl-diu-fb: remove unused panel operating mode support
  drivers/video: fsl-diu-fb: use an enum for the AOI index
  drivers/video: fsl-diu-fb: add several new video modes
  drivers/video: fsl-diu-fb: remove broken screen blanking support
  drivers/video: fsl-diu-fb: move some definitions out of the header file
  drivers/video: fsl-diu-fb: fix some ioctls
  video: da8xx-fb: Increased resolution configuration of revised LCDC IP
  OMAPDSS: picodlp: add missing #include <linux/module.h>
  fb: fix au1100fb bitrot.
  mx3fb: fix NULL pointer dereference in screen blanking.
  video: irq: Remove IRQF_DISABLED
  smscufx: change edid data to u8 instead of char
  OMAPDSS: DISPC: zorder support for DSS overlays
  OMAPDSS: DISPC: VIDEO3 pipeline support
  OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting
  video/omap: fix build dependencies
  ...

Fix up conflicts in:
 - drivers/staging/xgifb/XGI_main_26.c
	Changes to XGIfb_pan_var()
 - drivers/video/omap/{lcd_apollon.c,lcd_ldp.c,lcd_overo.c}
	Removed (or in the case of apollon.c, merged into the generic
	DSS panel in drivers/video/omap2/displays/panel-generic-dpi.c)
2011-10-30 15:30:01 -07:00
Tomi Valkeinen
8d49fe74f5 OMAPDSS: Port the Apollon display driver to DSS2
Port the old omapfb panel driver for Apollon to DSS2.

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30 16:17:29 +03:00
Tomi Valkeinen
8a41ba9a37 OMAPDSS: Port the H4 display driver to DSS2
Port the old omapfb panel driver for H4 to DSS2.

Cc: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30 16:17:29 +03:00
Tomi Valkeinen
3fddbf54b3 OMAPDSS: Port 2430sdp display driver to DSS2
Port the old omapfb panel driver for 2430SDP to DSS2.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30 16:17:28 +03:00
Tomi Valkeinen
028c5a432a OMAPFB: Remove unused lcd drivers
drivers/video/omap/ contains some lcd drivers which are not used by any
board. They can be removed.

Cc: Arun C <arunedarath@mistralsolutions.com>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30 16:17:28 +03:00
Russell King
1bc857f700 ARM: gpio: omap: convert drivers to use asm/gpio.h rather than mach/gpio.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-08 14:27:44 +01:00
Linus Torvalds
829ae27329 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits)
  OMAP3: PM: Boot message is not an error, and not helpful, remove it
  OMAP3: cpuidle: change the power domains modes determination logic
  OMAP3: cpuidle: code rework for improved readability
  OMAP3: cpuidle: re-organize the C-states data
  OMAP3: clean-up mach specific cpuidle data structures
  OMAP3 cpuidle: remove useless SDP specific timings
  usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled
  usb: otg: OMAP4430: Fixing the omap4430_phy_init function
  usb: musb: am35x: fix compile error when building am35x
  usb: musb: OMAP4430: Power down the PHY during board init
  omap: drop board-igep0030.c
  omap: igep0020: add support for IGEP3
  omap: igep0020: minor refactoring
  omap: igep0020: name refactoring for future merge with IGEP3
  omap: Remove support for omap2evm
  arm: omap2plus: GPIO cleanup
  omap: musb: introduce default board config
  omap: move detection of NAND CS to common-board-devices
  omap: use common initialization for PMIC i2c bus
  omap: consolidate touch screen initialization among different boards
  ...
2011-05-26 12:11:54 -07:00
Tony Lindgren
91d94af56a omap: Remove support for omap2evm
The board support has never been merged for it as noticed
by Russell King <linux@arm.linux.org.uk>. So let's remove the
related dead code.

Cc: linux-fbdev@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-13 04:41:32 -07:00
Tomi Valkeinen
c96c92d893 OMAPFB: fix wrong clock aliases and device name
The clock aliases and the dss platform device name have changed, and
omapfb fails to initialize. Update the names to correct ones.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-05-12 19:39:49 +03:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Kirill A. Shutemov
9913319fc0 omap: use list_move() instead of list_del()/list_add() combination
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-22 15:13:35 +09:00
Jarkko Nikula
08a0a65794 omapfb: Fix linker error in drivers/video/omap/lcd_2430sdp.c
There is a linker error from lcd_2430sdp.c if CONFIG_TWL4030_CORE is not
set. This can be triggered on OMAP2 builds when OMAP3 or OMAP4 are not set.

drivers/built-in.o: In function `sdp2430_panel_disable':
drivers/video/omap/lcd_2430sdp.c:123: undefined reference to `twl_i2c_write_u8'
drivers/video/omap/lcd_2430sdp.c:124: undefined reference to `twl_i2c_write_u8'
drivers/built-in.o: In function `sdp2430_panel_enable':
drivers/video/omap/lcd_2430sdp.c:110: undefined reference to `twl_i2c_write_u8'
drivers/video/omap/lcd_2430sdp.c:112: undefined reference to `twl_i2c_write_u8'

Fix this by selecting the TWL4030_CORE for MACH_OMAP_2430SDP when building
with CONFIG_FB_OMAP as there is no own Kconfig entry for lcd_2430 and it is
compiled always when both MACH_OMAP_2430SDP and FB_OMAP are set.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11 15:46:26 +02:00
Janorkar, Mayuresh
0897cc2103 OMAP: OMAPFB: Adding help for FB_OMAP_LCD_VGA option
CONFIG_FB_OMAP_LCD_VGA option is present in drivers/video/omap
There is no explaination about what this flag does.
Lets add information about it.

FB_OMAP_LCD_VGA flag sets resolution of display to VGA (640 X 480).
The default resolution of 3430 LDP is 320 X 240.

Signed-off-by: Mayuresh Janorkar <mayur@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11 15:46:25 +02:00
Linus Torvalds
23d69b09b7 Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits)
  usb: don't use flush_scheduled_work()
  speedtch: don't abuse struct delayed_work
  media/video: don't use flush_scheduled_work()
  media/video: explicitly flush request_module work
  ioc4: use static work_struct for ioc4_load_modules()
  init: don't call flush_scheduled_work() from do_initcalls()
  s390: don't use flush_scheduled_work()
  rtc: don't use flush_scheduled_work()
  mmc: update workqueue usages
  mfd: update workqueue usages
  dvb: don't use flush_scheduled_work()
  leds-wm8350: don't use flush_scheduled_work()
  mISDN: don't use flush_scheduled_work()
  macintosh/ams: don't use flush_scheduled_work()
  vmwgfx: don't use flush_scheduled_work()
  tpm: don't use flush_scheduled_work()
  sonypi: don't use flush_scheduled_work()
  hvsi: don't use flush_scheduled_work()
  xen: don't use flush_scheduled_work()
  gdrom: don't use flush_scheduled_work()
  ...

Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c
as per Tejun.
2011-01-07 16:58:04 -08:00
Tejun Heo
afe2c511fb workqueue: convert cancel_rearming_delayed_work[queue]() users to cancel_delayed_work_sync()
cancel_rearming_delayed_work[queue]() has been superceded by
cancel_delayed_work_sync() quite some time ago.  Convert all the
in-kernel users.  The conversions are completely equivalent and
trivial.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: netdev@vger.kernel.org
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: xfs-masters@oss.sgi.com
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: netfilter-devel@vger.kernel.org
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: linux-nfs@vger.kernel.org
2010-12-15 10:56:11 +01:00
Tomi Valkeinen
b99ddbf83c OMAP: OMAPFB: disable old omapfb for OMAP4 builds
Build fails when OMAP4 and FB_OMAP are defined:

drivers/built-in.o: In function `omapfb_do_probe':
drivers/video/omap/omapfb_main.c:1773: undefined reference to `omap2_int_ctrl'

Old omapfb does not work on OMAP4, and never will. Change the omapfb
build dependency so that old omapfb depends on OMAP1/2/3, fixing the
build for plain OMAP4 builds.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-12-15 11:17:08 +02:00
Nicolas Kaiser
b4754ebc31 drivers/video/omap/blizzard.c: suspected typo in assignment
Untested, but looks like an obvious typo to me.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Cc: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:08 -07:00
Nicolas Kaiser
2308bfb8ac video/omap: remove mux.h include
Including mux.h should no longer be needed for omap2/3/4 SoCs
outside arch/arm/mach-omap2 files.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-10-22 23:21:02 +03:00
Tony Lindgren
18dbe6c5dd omap: mux: Mux Apollon LCD power in board-apollon.c
Use the new mux function for that.

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:39 +03:00
Tomi Valkeinen
bc092a303a OMAP: OMAPFB: fix rfbi.c compile error
The code in rfbi.c tried to get the omapdss platform_device via a static
member defined in dispc.c, leading to a compile error. The same
platform_device is available through rfbi-struct.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-06-15 10:17:25 +03:00
Janusz Krzysztofik
256a804283 OMAPFB: LCDC: change update_mode to DISABLED when going suspend
I was observing the following error messages on my OMAP1 based Amstrad Delta
board when first changing from text to graphics mode or vice versa after the
LCD display had been blanked:
	omapfb omapfb: timeout waiting for FRAME DONE
with a followup error message while unblanking it back:
	omapfb omapfb: resetting (status 0xffffffb2,reset count 1)
As a visible result, image pixels happened to be shifted by a few bits,
giving wrong colors.

Examining the code, I found that this problem occures when an OMAP1 internal
LCD controller is disabled from omap_lcdc_suspend() and then a subsequent
omap_lcdc_setup_plane() calls disable_controller() again. This potentially
error provoking behaviour is triggered by the lcdc.update_mode flag being kept
at OMAP_AUTO_UPDATE, regardless of the controller and panel being suspended.

This patch tries to correct the problem by replacing both omap_lcdc_suspend()
and omap_lcdc_resume() function bodies with single calls to
omap_lcdc_set_update_mode() with a respective OMAP_UPDATE_DISABLE or
OMAP_AUTO_UPDATE argument. As a result, exactly the same lower level
operations are performed, with addition of changing the lcdc.update_mode flag
to a value better suited for the controller state. This prevents any further
calls to disable_controller() from omap_lcdc_setup_plane() while the display
is suspended.

Created against linux-2.6.34-rc7.
Tested on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-06-15 10:17:19 +03:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Jiri Kosina
318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Janusz Krzysztofik
e721032785 omapfb: lcd_ams_delta: add support for contrast control
The patch extends the Amstrad Delta LCD panel driver with optional support for
changing contrast using standard LCD class device API instead of setting it
silently to a default value at panel enable. It also allows for lowering power
consumption by turning off OMAP_PWL_CLK_ENABLE via lcd_ops.set_power callback.

Created and tested against linux-omap for-next,
commit 155a75d9725e66e5ec8a383822957dee52427057.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12 12:46:07 +02:00
Janusz Krzysztofik
3e9ff04408 omapfb: Fix 12-bit display (RGB444 color mode) handling
Support for RGB444 (12-bit) pixel format has been introduced into omapfb/lcdc
by Mark Underwood on 2006-05-26 (commit
f74edb6668aad9fc8e81585861b18f996c78a574) in preparation for Amstrad Delta
(E3) videophone LCD display support.

Before the Amstrad Delta LCD patch by Jonathan McDowell was applied (on
2006-08-04, commit 8d22fb2ea004cdb6379b54c1a8fd1546cfe40ed7), omapfb and lcdc
code was changed substantially (commit
e563dc81aa01bd8bbb01bc53975a15c398715f62 dated 2006-06-26) in a way that broke
Mark's 12-bit display support. Than, a patch by Jonathan, that supposed to
correct the problem, was introduced immediatelly (on 2006-08-04, commit
e10a75b49e7a57ae17c28b705153c70eba15a8ef).

As a result, the Amstrad Delta display was working correctly at boot time,
with fbset reporting:

	geometry 480 320 480 320 16
	...
	rgba 4/8,4/4,4/0,0/0

However, after first framebuffer reinitialization, colors were no longer being
displayed correctly and fbset was reporting:

        rgba 5/11,6/5,5/0,0/0

The patch tries to correct the issue by setting plane->color_mode depending on
panel->bpp, not var->bits_per_pixel.

Created and tested on Amstrad Delta against linux-2.6.33-rc3.

Signed-off-by: Janusz Krzysztofik <jkrzysz@tis.icnet.pl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12 12:46:07 +02:00