Commit Graph

43 Commits

Author SHA1 Message Date
Christoffer Dall
ae705930fc arm/arm64: KVM: Keep elrsr/aisr in sync with software model
There is an interesting bug in the vgic code, which manifests itself
when the KVM run loop has a signal pending or needs a vmid generation
rollover after having disabled interrupts but before actually switching
to the guest.

In this case, we flush the vgic as usual, but we sync back the vgic
state and exit to userspace before entering the guest.  The consequence
is that we will be syncing the list registers back to the software model
using the GICH_ELRSR and GICH_EISR from the last execution of the guest,
potentially overwriting a list register containing an interrupt.

This showed up during migration testing where we would capture a state
where the VM has masked the arch timer but there were no interrupts,
resulting in a hung test.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Reported-by: Alex Bennee <alex.bennee@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-03-14 13:42:07 +01:00
Andre Przywara
ac3d373564 arm/arm64: KVM: allow userland to request a virtual GICv3
With all of the GICv3 code in place now we allow userland to ask the
kernel for using a virtual GICv3 in the guest.
Also we provide the necessary support for guests setting the memory
addresses for the virtual distributor and redistributors.
This requires some userland code to make use of that feature and
explicitly ask for a virtual GICv3.
Document that KVM_CREATE_IRQCHIP only works for GICv2, but is
considered legacy and using KVM_CREATE_DEVICE is preferred.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:33 +01:00
Andre Przywara
b5d84ff600 arm/arm64: KVM: enable kernel side of GICv3 emulation
With all the necessary GICv3 emulation code in place, we can now
connect the code to the GICv3 backend in the kernel.
The LR register handling is different depending on the emulated GIC
model, so provide different implementations for each.
Also allow non-v2-compatible GICv3 implementations (which don't
provide MMIO regions for the virtual CPU interface in the DT), but
restrict those hosts to support GICv3 guests only.
If the device tree provides a GICv2 compatible GICV resource entry,
but that one is faulty, just disable the GICv2 emulation and let the
user use at least the GICv3 emulation for guests.
To provide proper support for the legacy KVM_CREATE_IRQCHIP ioctl,
note virtual GICv2 compatibility in struct vgic_params and use it
on creating a VGICv2.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:32 +01:00
Andre Przywara
6d52f35af1 arm64: KVM: add SGI generation register emulation
While the generation of a (virtual) inter-processor interrupt (SGI)
on a GICv2 works by writing to a MMIO register, GICv3 uses the system
register ICC_SGI1R_EL1 to trigger them.
Add a trap handler function that calls the new SGI register handler
in the GICv3 code. As ICC_SRE_EL1.SRE at this point is still always 0,
this will not trap yet, but will only be used later when all the data
structures have been initialized properly.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:32 +01:00
Andre Przywara
a0675c25d6 arm/arm64: KVM: add virtual GICv3 distributor emulation
With everything separated and prepared, we implement a model of a
GICv3 distributor and redistributors by using the existing framework
to provide handler functions for each register group.

Currently we limit the emulation to a model enforcing a single
security state, with SRE==1 (forcing system register access) and
ARE==1 (allowing more than 8 VCPUs).

We share some of the functions provided for GICv2 emulation, but take
the different ways of addressing (v)CPUs into account.
Save and restore is currently not implemented.

Similar to the split-off of the GICv2 specific code, the new emulation
code goes into a new file (vgic-v3-emul.c).

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:31 +01:00
Andre Przywara
2f5fa41a7a arm/arm64: KVM: make the value of ICC_SRE_EL1 a per-VM variable
ICC_SRE_EL1 is a system register allowing msr/mrs accesses to the
GIC CPU interface for EL1 (guests). Currently we force it to 0, but
for proper GICv3 support we have to allow guests to use it (depending
on their selected virtual GIC model).
So add ICC_SRE_EL1 to the list of saved/restored registers on a
world switch, but actually disallow a guest to change it by only
restoring a fixed, once-initialized value.
This value depends on the GIC model userland has chosen for a guest.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:28 +01:00
Andre Przywara
3caa2d8c3b arm/arm64: KVM: make the maximum number of vCPUs a per-VM value
Currently the maximum number of vCPUs supported is a global value
limited by the used GIC model. GICv3 will lift this limit, but we
still need to observe it for guests using GICv2.
So the maximum number of vCPUs is per-VM value, depending on the
GIC model the guest uses.
Store and check the value in struct kvm_arch, but keep it down to
8 for now.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:28 +01:00
Andre Przywara
b26e5fdac4 arm/arm64: KVM: introduce per-VM ops
Currently we only have one virtual GIC model supported, so all guests
use the same emulation code. With the addition of another model we
end up with different guests using potentially different vGIC models,
so we have to split up some functions to be per VM.
Introduce a vgic_vm_ops struct to hold function pointers for those
functions that are different and provide the necessary code to
initialize them.
Also split up the vgic_init() function to separate out VGIC model
specific functionality into a separate function, which will later be
different for a GICv3 model.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:26 +01:00
Andre Przywara
59892136c4 arm/arm64: KVM: pass down user space provided GIC type into vGIC code
With the introduction of a second emulated GIC model we need to let
userspace specify the GIC model to use for each VM. Pass the
userspace provided value down into the vGIC code and store it there
to differentiate later.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-20 18:25:25 +01:00
Christoffer Dall
05971120fc arm/arm64: KVM: Require in-kernel vgic for the arch timers
It is curently possible to run a VM with architected timers support
without creating an in-kernel VGIC, which will result in interrupts from
the virtual timer going nowhere.

To address this issue, move the architected timers initialization to the
time when we run a VCPU for the first time, and then only initialize
(and enable) the architected timers if we have a properly created and
initialized in-kernel VGIC.

When injecting interrupts from the virtual timer to the vgic, the
current setup should ensure that this never calls an on-demand init of
the VGIC, which is the only call path that could return an error from
kvm_vgic_inject_irq(), so capture the return value and raise a warning
if there's an error there.

We also change the kvm_timer_init() function from returning an int to be
a void function, since the function always succeeds.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-15 11:50:42 +01:00
Christoffer Dall
1f57be2895 arm/arm64: KVM: Add (new) vgic_initialized macro
Some code paths will need to check to see if the internal state of the
vgic has been initialized (such as when creating new VCPUs), so
introduce such a macro that checks the nr_cpus field which is set when
the vgic has been initialized.

Also set nr_cpus = 0 in kvm_vgic_destroy, because the error path in
vgic_init() will call this function, and code should never errornously
assume the vgic to be properly initialized after an error.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-13 14:17:10 +01:00
Christoffer Dall
c52edf5f8c arm/arm64: KVM: Rename vgic_initialized to vgic_ready
The vgic_initialized() macro currently returns the state of the
vgic->ready flag, which indicates if the vgic is ready to be used when
running a VM, not specifically if its internal state has been
initialized.

Rename the macro accordingly in preparation for a more nuanced
initialization flow.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-13 14:17:05 +01:00
Peter Maydell
6d3cfbe21b arm/arm64: KVM: vgic: move reset initialization into vgic_init_maps()
VGIC initialization currently happens in three phases:
 (1) kvm_vgic_create() (triggered by userspace GIC creation)
 (2) vgic_init_maps() (triggered by userspace GIC register read/write
     requests, or from kvm_vgic_init() if not already run)
 (3) kvm_vgic_init() (triggered by first VM run)

We were doing initialization of some state to correspond with the
state of a freshly-reset GIC in kvm_vgic_init(); this is too late,
since it will overwrite changes made by userspace using the
register access APIs before the VM is run. Move this initialization
earlier, into the vgic_init_maps() phase.

This fixes a bug where QEMU could successfully restore a saved
VM state snapshot into a VM that had already been run, but could
not restore it "from cold" using the -loadvm command line option
(the symptoms being that the restored VM would run but interrupts
were ignored).

Finally rename vgic_init_maps to vgic_init and renamed kvm_vgic_init to
kvm_vgic_map_resources.

  [ This patch is originally written by Peter Maydell, but I have
    modified it somewhat heavily, renaming various bits and moving code
    around.  If something is broken, I am to be blamed. - Christoffer ]

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-12-13 14:15:52 +01:00
Christoffer Dall
2df36a5dd6 arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs
The EIRSR and ELRSR registers are 32-bit registers on GICv2, and we
store these as an array of two such registers on the vgic vcpu struct.
However, we access them as a single 64-bit value or as a bitmap pointer
in the generic vgic code, which breaks BE support.

Instead, store them as u64 values on the vgic structure and do the
word-swapping in the assembly code, which already handles the byte order
for BE systems.

Tested-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-16 10:57:41 +02:00
Arnd Bergmann
b5e7a955a3 ARM: KVM: fix vgic-disabled build
The vgic code can be disabled in Kconfig and there are dummy implementations
of most of the provided API functions for the disabled case.

However, the newly introduced kvm_vgic_destroy/kvm_vgic_vcpu_destroy
functions are lacking those dummies, resulting in this build error:

arch/arm/kvm/arm.c: In function 'kvm_arch_destroy_vm':
arch/arm/kvm/arm.c:165:2: error: implicit declaration of function 'kvm_vgic_destroy' [-Werror=implicit-function-declaration]
  kvm_vgic_destroy(kvm);
  ^
arch/arm/kvm/arm.c: In function 'kvm_arch_vcpu_free':
arch/arm/kvm/arm.c:248:2: error: implicit declaration of function 'kvm_vgic_vcpu_destroy' [-Werror=implicit-function-declaration]
  kvm_vgic_vcpu_destroy(vcpu);
  ^

This adds two inline helpers to get it to build again in this configuration.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: c1bfb577ad ("arm/arm64: KVM: vgic: switch to dynamic allocation")
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-07 12:30:16 +02:00
Marc Zyngier
4956f2bc1f arm/arm64: KVM: vgic: delay vgic allocation until init time
It is now quite easy to delay the allocation of the vgic tables
until we actually require it to be up and running (when the first
vcpu is kicking around, or someones tries to access the GIC registers).

This allow us to allocate memory for the exact number of CPUs we
have. As nobody configures the number of interrupts just yet,
use a fallback to VGIC_NR_IRQS_LEGACY.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-18 18:48:58 -07:00
Marc Zyngier
5fb66da640 arm/arm64: KVM: vgic: kill VGIC_NR_IRQS
Nuke VGIC_NR_IRQS entierly, now that the distributor instance
contains the number of IRQ allocated to this GIC.

Also add VGIC_NR_IRQS_LEGACY to preserve the current API.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-18 18:48:57 -07:00
Marc Zyngier
c3c918361a arm/arm64: KVM: vgic: handle out-of-range MMIO accesses
Now that we can (almost) dynamically size the number of interrupts,
we're facing an interesting issue:

We have to evaluate at runtime whether or not an access hits a valid
register, based on the sizing of this particular instance of the
distributor. Furthermore, the GIC spec says that accessing a reserved
register is RAZ/WI.

For this, add a new field to our range structure, indicating the number
of bits a single interrupts uses. That allows us to find out whether or
not the access is in range.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-18 18:48:57 -07:00
Marc Zyngier
fc675e355e arm/arm64: KVM: vgic: kill VGIC_MAX_CPUS
We now have the information about the number of CPU interfaces in
the distributor itself. Let's get rid of VGIC_MAX_CPUS, and just
rely on KVM_MAX_VCPUS where we don't have the choice. Yet.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-18 18:48:57 -07:00
Marc Zyngier
fb65ab63b8 arm/arm64: KVM: vgic: Parametrize VGIC_NR_SHARED_IRQS
Having a dynamic number of supported interrupts means that we
cannot relly on VGIC_NR_SHARED_IRQS being fixed anymore.

Instead, make it take the distributor structure as a parameter,
so it can return the right value.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-18 18:48:56 -07:00
Marc Zyngier
c1bfb577ad arm/arm64: KVM: vgic: switch to dynamic allocation
So far, all the VGIC data structures are statically defined by the
*maximum* number of vcpus and interrupts it supports. It means that
we always have to oversize it to cater for the worse case.

Start by changing the data structures to be dynamically sizeable,
and allocate them at runtime.

The sizes are still very static though.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-09-18 18:48:52 -07:00
Christoffer Dall
faa1b46c3e arm/arm64: KVM: vgic: Improve handling of GICD_I{CS}PENDRn
Writes to GICD_ISPENDRn and GICD_ICPENDRn are currently not handled
correctly for level-triggered interrupts.  The spec states that for
level-triggered interrupts, writes to the GICD_ISPENDRn activate the
output of a flip-flop which is in turn or'ed with the actual input
interrupt signal.  Correspondingly, writes to GICD_ICPENDRn simply
deactivates the output of that flip-flop, but does not (of course) affect
the external input signal.  Reads from GICC_IAR will also deactivate the
flip-flop output.

This requires us to track the state of the level-input separately from
the state in the flip-flop.  We therefore introduce two new variables on
the distributor struct to track these two states.  Astute readers may
notice that this is introducing more state than required (because an OR
of the two states gives you the pending state), but the remaining vgic
code uses the pending bitmap for optimized operations to figure out, at
the end of the day, if an interrupt is pending or not on the distributor
side.  Refactoring the code to consider the two state variables all the
places where we currently access the precomputed pending value, did not
look pretty.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-09-18 18:44:31 -07:00
Christoffer Dall
dbf20f9d81 arm/arm64: KVM: Rename irq_active to irq_queued
We have a special bitmap on the distributor struct to keep track of when
level-triggered interrupts are queued on the list registers.  This was
named irq_active, which is confusing, because the active state of an
interrupt as per the GIC spec is a different thing, not specifically
related to edge-triggered/level-triggered configurations but rather
indicates an interrupt which has been ack'ed but not yet eoi'ed.

Rename the bitmap and the corresponding accessor functions to irq_queued
to clarify what this is actually used for.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-09-18 18:44:30 -07:00
Christoffer Dall
227844f538 arm/arm64: KVM: Rename irq_state to irq_pending
The irq_state field on the distributor struct is ambiguous in its
meaning; the comment says it's the level of the input put, but that
doesn't make much sense for edge-triggered interrupts.  The code
actually uses this state variable to check if the interrupt is in the
pending state on the distributor so clarify the comment and rename the
actual variable and accessor methods.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-09-18 18:44:30 -07:00
Marc Zyngier
b2fb1c0d37 KVM: ARM: vgic: add the GICv3 backend
Introduce the support code for emulating a GICv2 on top of GICv3
hardware.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:36 -07:00
Marc Zyngier
1a9b13056d arm64: KVM: split GICv2 world switch from hyp code
Move the GICv2 world switch code into its own file, and add the
necessary indirection to the arm64 switch code.

Also introduce a new type field to the vgic_params structure.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:36 -07:00
Marc Zyngier
f982cf4e9c KVM: ARM: vgic: revisit implementation of irqchip_in_kernel
So far, irqchip_in_kernel() was implemented by testing the value of
vctrl_base, which worked fine with GICv2.

With GICv3, this field is useless, as we're using system registers
instead of a emmory mapped interface. To solve this, add a boolean
flag indicating if the we're using a vgic or not.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:35 -07:00
Marc Zyngier
8f186d522c KVM: ARM: vgic: split GICv2 backend from the main vgic code
Brutally hack the innocent vgic code, and move the GICv2 specific code
to its own file, using vgic_ops and vgic_params as a way to pass
information between the two blocks.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:34 -07:00
Marc Zyngier
ca85f623e3 KVM: ARM: introduce vgic_params structure
Move all the data specific to a given GIC implementation into its own
little structure.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:34 -07:00
Marc Zyngier
da8dafd177 KVM: ARM: vgic: introduce vgic_enable
Move the code dealing with enabling the VGIC on to vgic_ops.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:33 -07:00
Marc Zyngier
beee38b9d0 KVM: ARM: vgic: abstract VMCR access
Instead of directly messing with with the GICH_VMCR bits for the CPU
interface save/restore code, add accessors that encode/decode the
entire set of registers exposed by VMCR.

Not the most efficient thing, but given that this code is only used
by the save/restore code, performance is far from being critical.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:33 -07:00
Marc Zyngier
909d9b5025 KVM: ARM: vgic: move underflow handling to vgic_ops
Move the code dealing with LR underflow handling to its own functions,
and make them accessible through vgic_ops.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:33 -07:00
Marc Zyngier
495dd859f3 KVM: ARM: vgic: abstract MISR decoding
Instead of directly dealing with the GICH_MISR bits, move the code to
its own function and use a couple of public flags to represent the
actual state.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:32 -07:00
Marc Zyngier
8d6a0313c1 KVM: ARM: vgic: abstract EISR bitmap access
Move the GICH_EISR access to its own function.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:32 -07:00
Marc Zyngier
69bb2c9fbc KVM: ARM: vgic: abstract access to the ELRSR bitmap
Move the GICH_ELRSR access to its own functions, and add them to
the vgic_ops structure.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:31 -07:00
Marc Zyngier
8d5c6b06a5 KVM: ARM: vgic: introduce vgic_ops and LR manipulation primitives
In order to split the various register manipulation from the main vgic
code, introduce a vgic_ops structure, and start by abstracting the
LR manipulation code with a couple of accessors.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:31 -07:00
Marc Zyngier
eede821dbf KVM: arm/arm64: vgic: move GICv2 registers to their own structure
In order to make way for the GICv3 registers, move the v2-specific
registers to their own structure.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11 04:57:31 -07:00
Alex Bennée
1df08ba0aa arm64: KVM: allow export and import of generic timer regs
For correct guest suspend/resume behaviour we need to ensure we include
the generic timer registers for 64 bit guests. As CONFIG_KVM_ARM_TIMER is
always set for arm64 we don't need to worry about null implementations.
However I have re-jigged the kvm_arm_timer_set/get_reg declarations to
be in the common include/kvm/arm_arch_timer.h headers.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-07-11 04:46:55 -07:00
Marc Zyngier
6cbde8253a ARM: KVM: fix non-VGIC compilation
Add a stub for kvm_vgic_addr when compiling without
CONFIG_KVM_ARM_VGIC. The usefulness of this configurarion is extremely
doubtful, but let's fix it anyway (until we decide that we'll always
support a VGIC).

Reported-by: Michele Paolino <m.paolino@virtualopensystems.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-06 09:47:42 +01:00
Christoffer Dall
ce01e4e887 KVM: arm-vgic: Set base addr through device API
Support setting the distributor and cpu interface base addresses in the
VM physical address space through the KVM_{SET,GET}_DEVICE_ATTR API
in addition to the ARM specific API.

This has the added benefit of being able to share more code in user
space and do things in a uniform manner.

Also deprecate the older API at the same time, but backwards
compatibility will be maintained.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21 10:01:22 -08:00
Christoffer Dall
9b2d2e0df8 ARM: KVM: vgic: Bump VGIC_NR_IRQS to 256
The Versatile Express TC2 board, which we use as our main emulated
platform in QEMU, defines 160+32 == 192 interrupts, so limiting the
number of interrupts to 128 is not quite going to cut it for real board
emulation.

Note that this didn't use to be a problem because QEMU was buggy and
only defined 128 interrupts until recently.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-08-30 16:12:39 +03:00
Anup Patel
5ae7f87a56 ARM: KVM: Allow host virt timer irq to be different from guest timer virt irq
The arch_timer irq numbers (or PPI numbers) are implementation dependent,
so the host virtual timer irq number can be different from guest virtual
timer irq number.

This patch ensures that host virtual timer irq number is read from DTB and
guest virtual timer irq is determined based on vcpu target type.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-06-26 10:50:02 -07:00
Marc Zyngier
7275acdfe2 ARM: KVM: move GIC/timer code to a common location
As KVM/arm64 is looming on the horizon, it makes sense to move some
of the common code to a single location in order to reduce duplication.

The code could live anywhere. Actually, most of KVM is already built
with a bunch of ugly ../../.. hacks in the various Makefiles, so we're
not exactly talking about style here. But maybe it is time to start
moving into a less ugly direction.

The include files must be in a "public" location, as they are accessed
from non-KVM files (arch/arm/kernel/asm-offsets.c).

For this purpose, introduce two new locations:
- virt/kvm/arm/ : x86 and ia64 already share the ioapic code in
  virt/kvm, so this could be seen as a (very ugly) precedent.
- include/kvm/  : there is already an include/xen, and while the
  intent is slightly different, this seems as good a location as
  any

Eventually, we should probably have independant Makefiles at every
levels (just like everywhere else in the kernel), but this is just
the first step.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-19 15:13:08 +03:00