linux-kernel-test/drivers/input/keyboard/cros_ec_keyb.c
Doug Anderson 64757eba62 Input: cros_ec_keyb - fix problems with backslash
The driver can't deal with two entries its keymap having the same keycode.
When this happens it will get confused about whether the key is down or up
and will cause some screwy behavior.

We need to have two entries for KEY_BACKSLASH to handle US and UK
keyboards. Specifically:
* On the US keyboard the backslash key (above enter) is r3 c11 and is
  supposed to be reported as BACKSLASH.
* On the UK keyboard the # key (left of enter) is r4 c10 and is
  supposed to be reported as BACKSLASH.
* On the UK keyboard the \ key (left of Z) is r2 c7 and is supposed to
  be reported as KEY_102ND.

Note that both keyboards (US and UK) have only one physical backslash
key so the constraint that each physical key should have its own keycode
still stands.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-31 10:45:29 -08:00

342 lines
9.4 KiB
C

/*
* ChromeOS EC keyboard driver
*
* Copyright (C) 2012 Google, Inc
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* This driver uses the Chrome OS EC byte-level message-based protocol for
* communicating the keyboard state (which keys are pressed) from a keyboard EC
* to the AP over some bus (such as i2c, lpc, spi). The EC does debouncing,
* but everything else (including deghosting) is done here. The main
* motivation for this is to keep the EC firmware as simple as possible, since
* it cannot be easily upgraded and EC flash/IRAM space is relatively
* expensive.
*/
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/notifier.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/input/matrix_keypad.h>
#include <linux/mfd/cros_ec.h>
#include <linux/mfd/cros_ec_commands.h>
/*
* @rows: Number of rows in the keypad
* @cols: Number of columns in the keypad
* @row_shift: log2 or number of rows, rounded up
* @keymap_data: Matrix keymap data used to convert to keyscan values
* @ghost_filter: true to enable the matrix key-ghosting filter
* @old_kb_state: bitmap of keys pressed last scan
* @dev: Device pointer
* @idev: Input device
* @ec: Top level ChromeOS device to use to talk to EC
* @event_notifier: interrupt event notifier for transport devices
*/
struct cros_ec_keyb {
unsigned int rows;
unsigned int cols;
int row_shift;
const struct matrix_keymap_data *keymap_data;
bool ghost_filter;
uint8_t *old_kb_state;
struct device *dev;
struct input_dev *idev;
struct cros_ec_device *ec;
struct notifier_block notifier;
};
static bool cros_ec_keyb_row_has_ghosting(struct cros_ec_keyb *ckdev,
uint8_t *buf, int row)
{
int pressed_in_row = 0;
int row_has_teeth = 0;
int col, mask;
mask = 1 << row;
for (col = 0; col < ckdev->cols; col++) {
if (buf[col] & mask) {
pressed_in_row++;
row_has_teeth |= buf[col] & ~mask;
if (pressed_in_row > 1 && row_has_teeth) {
/* ghosting */
dev_dbg(ckdev->dev,
"ghost found at: r%d c%d, pressed %d, teeth 0x%x\n",
row, col, pressed_in_row,
row_has_teeth);
return true;
}
}
}
return false;
}
/*
* Returns true when there is at least one combination of pressed keys that
* results in ghosting.
*/
static bool cros_ec_keyb_has_ghosting(struct cros_ec_keyb *ckdev, uint8_t *buf)
{
int row;
/*
* Ghosting happens if for any pressed key X there are other keys
* pressed both in the same row and column of X as, for instance,
* in the following diagram:
*
* . . Y . g .
* . . . . . .
* . . . . . .
* . . X . Z .
*
* In this case only X, Y, and Z are pressed, but g appears to be
* pressed too (see Wikipedia).
*
* We can detect ghosting in a single pass (*) over the keyboard state
* by maintaining two arrays. pressed_in_row counts how many pressed
* keys we have found in a row. row_has_teeth is true if any of the
* pressed keys for this row has other pressed keys in its column. If
* at any point of the scan we find that a row has multiple pressed
* keys, and at least one of them is at the intersection with a column
* with multiple pressed keys, we're sure there is ghosting.
* Conversely, if there is ghosting, we will detect such situation for
* at least one key during the pass.
*
* (*) This looks linear in the number of keys, but it's not. We can
* cheat because the number of rows is small.
*/
for (row = 0; row < ckdev->rows; row++)
if (cros_ec_keyb_row_has_ghosting(ckdev, buf, row))
return true;
return false;
}
/*
* Compares the new keyboard state to the old one and produces key
* press/release events accordingly. The keyboard state is 13 bytes (one byte
* per column)
*/
static void cros_ec_keyb_process(struct cros_ec_keyb *ckdev,
uint8_t *kb_state, int len)
{
struct input_dev *idev = ckdev->idev;
int col, row;
int new_state;
int old_state;
int num_cols;
num_cols = len;
if (ckdev->ghost_filter && cros_ec_keyb_has_ghosting(ckdev, kb_state)) {
/*
* Simple-minded solution: ignore this state. The obvious
* improvement is to only ignore changes to keys involved in
* the ghosting, but process the other changes.
*/
dev_dbg(ckdev->dev, "ghosting found\n");
return;
}
for (col = 0; col < ckdev->cols; col++) {
for (row = 0; row < ckdev->rows; row++) {
int pos = MATRIX_SCAN_CODE(row, col, ckdev->row_shift);
const unsigned short *keycodes = idev->keycode;
new_state = kb_state[col] & (1 << row);
old_state = ckdev->old_kb_state[col] & (1 << row);
if (new_state != old_state) {
dev_dbg(ckdev->dev,
"changed: [r%d c%d]: byte %02x\n",
row, col, new_state);
input_report_key(idev, keycodes[pos],
new_state);
}
}
ckdev->old_kb_state[col] = kb_state[col];
}
input_sync(ckdev->idev);
}
static int cros_ec_keyb_open(struct input_dev *dev)
{
struct cros_ec_keyb *ckdev = input_get_drvdata(dev);
return blocking_notifier_chain_register(&ckdev->ec->event_notifier,
&ckdev->notifier);
}
static void cros_ec_keyb_close(struct input_dev *dev)
{
struct cros_ec_keyb *ckdev = input_get_drvdata(dev);
blocking_notifier_chain_unregister(&ckdev->ec->event_notifier,
&ckdev->notifier);
}
static int cros_ec_keyb_get_state(struct cros_ec_keyb *ckdev, uint8_t *kb_state)
{
return ckdev->ec->command_recv(ckdev->ec, EC_CMD_MKBP_STATE,
kb_state, ckdev->cols);
}
static int cros_ec_keyb_work(struct notifier_block *nb,
unsigned long state, void *_notify)
{
int ret;
struct cros_ec_keyb *ckdev = container_of(nb, struct cros_ec_keyb,
notifier);
uint8_t kb_state[ckdev->cols];
ret = cros_ec_keyb_get_state(ckdev, kb_state);
if (ret >= 0)
cros_ec_keyb_process(ckdev, kb_state, ret);
return NOTIFY_DONE;
}
static int cros_ec_keyb_probe(struct platform_device *pdev)
{
struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
struct device *dev = ec->dev;
struct cros_ec_keyb *ckdev;
struct input_dev *idev;
struct device_node *np;
int err;
np = pdev->dev.of_node;
if (!np)
return -ENODEV;
ckdev = devm_kzalloc(&pdev->dev, sizeof(*ckdev), GFP_KERNEL);
if (!ckdev)
return -ENOMEM;
err = matrix_keypad_parse_of_params(&pdev->dev, &ckdev->rows,
&ckdev->cols);
if (err)
return err;
ckdev->old_kb_state = devm_kzalloc(&pdev->dev, ckdev->cols, GFP_KERNEL);
if (!ckdev->old_kb_state)
return -ENOMEM;
idev = devm_input_allocate_device(&pdev->dev);
if (!idev)
return -ENOMEM;
ckdev->ec = ec;
ckdev->notifier.notifier_call = cros_ec_keyb_work;
ckdev->dev = dev;
dev_set_drvdata(&pdev->dev, ckdev);
idev->name = ec->ec_name;
idev->phys = ec->phys_name;
__set_bit(EV_REP, idev->evbit);
idev->id.bustype = BUS_VIRTUAL;
idev->id.version = 1;
idev->id.product = 0;
idev->dev.parent = &pdev->dev;
idev->open = cros_ec_keyb_open;
idev->close = cros_ec_keyb_close;
ckdev->ghost_filter = of_property_read_bool(np,
"google,needs-ghost-filter");
err = matrix_keypad_build_keymap(NULL, NULL, ckdev->rows, ckdev->cols,
NULL, idev);
if (err) {
dev_err(dev, "cannot build key matrix\n");
return err;
}
ckdev->row_shift = get_count_order(ckdev->cols);
input_set_capability(idev, EV_MSC, MSC_SCAN);
input_set_drvdata(idev, ckdev);
ckdev->idev = idev;
err = input_register_device(ckdev->idev);
if (err) {
dev_err(dev, "cannot register input device\n");
return err;
}
return 0;
}
#ifdef CONFIG_PM_SLEEP
/* Clear any keys in the buffer */
static void cros_ec_keyb_clear_keyboard(struct cros_ec_keyb *ckdev)
{
uint8_t old_state[ckdev->cols];
uint8_t new_state[ckdev->cols];
unsigned long duration;
int i, ret;
/*
* Keep reading until we see that the scan state does not change.
* That indicates that we are done.
*
* Assume that the EC keyscan buffer is at most 32 deep.
*/
duration = jiffies;
ret = cros_ec_keyb_get_state(ckdev, new_state);
for (i = 1; !ret && i < 32; i++) {
memcpy(old_state, new_state, sizeof(old_state));
ret = cros_ec_keyb_get_state(ckdev, new_state);
if (0 == memcmp(old_state, new_state, sizeof(old_state)))
break;
}
duration = jiffies - duration;
dev_info(ckdev->dev, "Discarded %d keyscan(s) in %dus\n", i,
jiffies_to_usecs(duration));
}
static int cros_ec_keyb_resume(struct device *dev)
{
struct cros_ec_keyb *ckdev = dev_get_drvdata(dev);
/*
* When the EC is not a wake source, then it could not have caused the
* resume, so we clear the EC's key scan buffer. If the EC was a
* wake source (e.g. the lid is open and the user might press a key to
* wake) then the key scan buffer should be preserved.
*/
if (ckdev->ec->was_wake_device)
cros_ec_keyb_clear_keyboard(ckdev);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume);
static struct platform_driver cros_ec_keyb_driver = {
.probe = cros_ec_keyb_probe,
.driver = {
.name = "cros-ec-keyb",
.pm = &cros_ec_keyb_pm_ops,
},
};
module_platform_driver(cros_ec_keyb_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ChromeOS EC keyboard driver");
MODULE_ALIAS("platform:cros-ec-keyb");